DiagRequest: start also on wakeupSimulation (mains powered machines)

src/ATBAPP/ATBDeviceControllerPlugin.cpp

@@ -30,13 +30,31 @@ ATBDeviceControllerPlugin::ATBDeviceControllerPlugin(QObject *parent)
     this->setParent(parent);
 
     this->pluginInfo = QString::fromUtf8(pluginInfoString.c_str());
+}
+
+ATBDeviceControllerPlugin::~ATBDeviceControllerPlugin() {}
+
+PLUGIN_STATE ATBDeviceControllerPlugin::initDCPlugin(QObject *eventReceiver, const QSettings & settings)
+{
+    this->eventReceiver = eventReceiver;
+
+    // read variables from setting
+    this->serialPortName = settings.value("ATBDeviceControllerPlugin/serialPort", "ttymxc2").toString();
+    QByteArray printerEncoding = settings.value("ATBDeviceControllerPlugin/printerEncoding", "ISO 8859-2").toString().toLatin1();
+    QString printerLocaleString = settings.value("ATBDeviceControllerPlugin/printerLocale", "de_DE").toString().toLatin1();
+    this->printerLocale = QLocale(printerLocaleString);
 
-    if (!this->private_loadCashAgentLib("")) {
-        return;
-    }
 
     this->init_sc_dbus();
 
+    QString persistentDataFile = "/mnt/system_data/dc_persistentData.dat";
+    this->persistentData = new PersistentData(persistentDataFile);
+
+
+    // setup libCA:
+    if (!this->private_loadCashAgentLib("")) {
+        return PLUGIN_STATE::NOT_INITIALIZED;
+    }
 
     //connect(dynamic_cast<QObject*>(hw), SIGNAL(hwapi_templatePrintFinished_OK()),  this, SLOT(onPrintFinishedOK()),  Qt::QueuedConnection);
     //connect(dynamic_cast<QObject*>(hw), SIGNAL(hwapi_templatePrintFinished_Err()), this, SLOT(onPrintFinishedERR()), Qt::QueuedConnection);
@@ -61,9 +79,6 @@ ATBDeviceControllerPlugin::ATBDeviceControllerPlugin(QObject *parent)
     dynamic_cast<QObject*>(hw)->moveToThread(hwThread);
     hwThread->start();
 
-    QString persistentDataFile = "/mnt/system_data/dc_persistentData.dat";
-    this->persistentData = new PersistentData(persistentDataFile);
-
     this->diag = new DeviceControllerDiag(this->persistentData, this);
     connect(this->diag, &DeviceControllerDiag::newVoltage, this, &ATBDeviceControllerPlugin::onNewVoltage);
 
@@ -75,19 +90,7 @@ ATBDeviceControllerPlugin::ATBDeviceControllerPlugin(QObject *parent)
     this->currentCashState = CASH_STATE::CACHE_EMPTY;
 
     this->cashStartAmountInt = 0;
-}
 
-ATBDeviceControllerPlugin::~ATBDeviceControllerPlugin() {}
-
-PLUGIN_STATE ATBDeviceControllerPlugin::initDCPlugin(QObject *eventReceiver, const QSettings & settings)
-{
-    this->eventReceiver = eventReceiver;
-
-    // read variables from setting
-    this->serialPortName = settings.value("ATBDeviceControllerPlugin/serialPort", "ttymxc2").toString();
-    QByteArray printerEncoding = settings.value("ATBDeviceControllerPlugin/printerEncoding", "ISO 8859-2").toString().toLatin1();
-    QString printerLocaleString = settings.value("ATBDeviceControllerPlugin/printerLocale", "de_DE").toString().toLatin1();
-    this->printerLocale = QLocale(printerLocaleString);
 
 
     if (this->isMaster) {
@@ -134,6 +137,37 @@ PLUGIN_STATE ATBDeviceControllerPlugin::initDCPlugin(QObject *eventReceiver, con
 }
 
 
+void ATBDeviceControllerPlugin::sendDeviceParameter(const QJsonObject &jsonObject)
+{
+
+    qCritical() << "ATBDeviceControllerPlugin::sendDeviceParameter:";
+
+
+    // extract location info and store location info in persistent data:
+    QJsonValue jsonSubVal;
+    jsonSubVal = jsonObject["Location"];
+
+    QString locationString = jsonSubVal.toString("");
+
+    if (locationString == "") {
+
+        qCritical() << "    -->  locationString NULL";
+        return;
+    }
+
+
+    uint16_t customerNr = PTUSystem::readCustomerNumber();
+    uint16_t machineNr  = PTUSystem::readMachineNumber();
+    uint16_t borough    = PTUSystem::readZoneNumber();
+    uint16_t zone       = PTUSystem::readGroupNumber();
+    uint16_t alias      = 0;
+    QByteArray locationBa = locationString.toLocal8Bit();
+
+    this->hw->sendMachineID(customerNr, machineNr, borough, zone, alias, locationBa.data());
+}
+
+
+
 void ATBDeviceControllerPlugin::startPhysicalLayer()
 {
     if (!this->isMaster) return;
@@ -196,20 +230,20 @@ void ATBDeviceControllerPlugin::reset()
 // Handle Mode-Changes --------------------------------------------------------
 
 void ATBDeviceControllerPlugin::onChangedProgramModeToSELL()
-{
+{    
     hw->dc_autoRequest(true);
     hw->rtc_setDateTime();
     hw->mdb_switchWake(0);   // wakeup MDB components
 }
 
 void ATBDeviceControllerPlugin::onChangedProgramModeToSERVICE()
-{
+{    
     hw->dc_autoRequest(true);
     hw->mdb_switchWake(0);   // wakeup MDB components
 }
 
 void ATBDeviceControllerPlugin::onChangedProgramModeToIDLE()
-{
+{    
     hw->dc_autoRequest(true);
     this->diag->diagRequest();
     hw->mdb_switchWake(1);
@@ -519,10 +553,14 @@ void ATBDeviceControllerPlugin::onAllDoorsClosed()
 {
     qCritical() << "ATBDeviceControllerPlugin::onAllDoorsClosed()";
 
-    emit this->requestModeIDLE();
-    this->dbus->finishedBackgroundTask("DOOR_OPEN");
+    if (this->diag->isErrorState()) {
+        emit this->requestModeOOO();
+    }
+    else {
+        emit this->requestModeIDLE();
+    }
 
-    // TODO: check for errors and create a machine event
+    this->dbus->finishedBackgroundTask("DOOR_OPEN");    
 }
 
 void ATBDeviceControllerPlugin::onNewVoltage(uint32_t voltage)
@@ -1466,7 +1504,7 @@ int ATBDeviceControllerPlugin::init_sc_dbus()
 
 void ATBDeviceControllerPlugin::onWokeUp(uchar source)
 {
-    if (source == 0x01) {
+    if (source == 0x01 || source == 0xFE) {
         // woke up from device controller
         this->diag->diagRequest();
     }

src/ATBAPP/ATBDeviceControllerPlugin.h

@@ -44,6 +44,8 @@ public:
     // interface:
     PLUGIN_STATE initDCPlugin(QObject *eventReceiver, const QSettings & settings);
 
+    void sendDeviceParameter(const QJsonObject & jsonObject);
+
     // TASKS: Cash handling -------------------------------------------------------
     void requestStartCashInput(const QString & amount);
     void requestStopCashInput();

src/ATBAPP/DeviceControllerDiag.cpp

@@ -12,6 +12,8 @@ DeviceControllerDiag::DeviceControllerDiag(PersistentData *pData, QObject *paren
     , eventReceiver(nullptr)
     , isRequestRunning(false)
     , flagInterruptDiag(false)
+    , lastState(DeviceController::State::INITIAL_STATE)
+    , _isErrorState(false)
     , pData(pData)
 {
     diagRequestTimeoutTimer = new QTimer(this);
@@ -62,6 +64,24 @@ void DeviceControllerDiag::onDiagRequestTimeoutTimerTimeout()
     this->flagInterruptDiag = true;
 }
 
+
+bool DeviceControllerDiag::isErrorState()
+{
+    return this->_isErrorState;
+}
+
+bool DeviceControllerDiag::isOperatingState()
+{
+    return !this->_isErrorState;
+}
+
+QSet<DeviceController::State> DeviceControllerDiag::getCurrentMachineState()
+{
+    return this->machineEventSet;
+}
+
+
+
 void DeviceControllerDiag::private_startDiag()
 {
     // check for DiagRequestTimeoutTimerTimeout:
@@ -365,7 +385,6 @@ void DeviceControllerDiag::private_sendDiagEvent(DeviceController::State result)
 {
     qCritical() << "DeviceControllerDiag::private_sendDiagEvent() result: " << result;
 
-
     if (this->eventReceiver == nullptr) {
         qCritical() << "DeviceControllerDiag: no eventReceiver";
         return;
@@ -388,61 +407,77 @@ void DeviceControllerDiag::private_sendDiagEvent(DeviceController::State result)
     QString parameter;
     switch (result) {
 
+    case DeviceController::State::INITIAL_STATE:
+        break;
     case DeviceController::State::A000:   // alarm / intrusion
         eventClass = EVENT_CLASS::ALARM;
         parameter  = "alarm / intrusion";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E002:    // real time clock error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "real time clock error";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E003:   // voltage error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "voltage error";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E004:   // temperature error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "temperature error";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E007:    // coin safe full
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "coin safe full";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E008:    // bill acceptor full
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "bill acceptor full";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E009:    // no cash box
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "no cash box";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E010:    // coin escrow
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "coin escrow";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E011:    // mem error int.ee.
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "mem error int.ee.";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E018:    // no paper
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "no paper";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E020:    // printer error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "printer error";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E025:    // coin blocker
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "coin blocker";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E026:    // error coin validator
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "error coin validator";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E034:    // mdb error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "mdb error";
+        this->_isErrorState = true;
         break;
 
     case DeviceController::State::E071:   // cash box change is ongoing
@@ -473,14 +508,21 @@ void DeviceControllerDiag::private_sendDiagEvent(DeviceController::State result)
     case DeviceController::State::E255:   // no valid data from DeviceController
         eventClass = EVENT_CLASS::STATE;
         parameter  = "";
-        qCritical() << "                ... ignore " << QMetaEnum::fromType<DeviceController::State>().valueToKey(result);
+        qCritical() << "       ... ignore " << QMetaEnum::fromType<DeviceController::State>().valueToKey(result);
         return;
         break;
     case DeviceController::State::O000:   // everything is fine
         this->machineEventSet.clear();
+        this->_isErrorState = false;
         eventClass = EVENT_CLASS::OPERATE;
         parameter  = "";
-        qCritical() << "                ... everything fine";
+        if (this->lastState == DeviceController::State::O000) {
+            qCritical() << "   ... everything fine, no state change -> skip sending";
+            return;
+        }
+        else {
+            qCritical() << "   ... everything fine";
+        }
         break;
 
     case DeviceController::State::W001:   // paper low
@@ -501,6 +543,7 @@ void DeviceControllerDiag::private_sendDiagEvent(DeviceController::State result)
         break;
     }
 
+    this->lastState = result;
 
     ATBMachineEvent *machineEvent = new ATBMachineEvent(
                 eventId,

src/ATBAPP/DeviceControllerDiag.h

@@ -52,7 +52,9 @@ namespace DeviceController {
         W001,
         W002,
         W003,
-        W004
+        W004,
+
+        INITIAL_STATE
     };
     Q_ENUM_NS(State)
 }
@@ -70,6 +72,13 @@ public:
     nsDeviceControllerInterface::COIN_PROCESSOR coinProcessorType;
     nsDeviceControllerInterface::BILL_ACCEPTOR  billAcceptor;
 
+    /**
+     * return true, if machineEventSet contains an error
+     */
+    bool isErrorState();
+    bool isOperatingState();
+    QSet<DeviceController::State> getCurrentMachineState();
+
 public slots:
     void diagRequest();
 
@@ -91,7 +100,9 @@ private:
 
     int lastVoltage;
 
+    DeviceController::State lastState;
     QSet<DeviceController::State> machineEventSet;
+    bool _isErrorState;
 
     PersistentData* pData;
 

src/ATBAPP/DeviceControllerInterface.h

@@ -5,6 +5,7 @@
 
 #include <QSettings>
 #include <QString>
+#include <QJsonObject>
 
 #include "ATBAPPplugin.h"
 
@@ -39,6 +40,12 @@ public:
     virtual nsDeviceControllerInterface::PLUGIN_STATE initDCPlugin(QObject *eventReceiver,
                                                                    const QSettings & settings) = 0;
 
+    /**
+     * e.g. send location
+     */
+    virtual void sendDeviceParameter(const QJsonObject & jsonObject) = 0;
+
+
     // TASKS: Cash handling -------------------------------------------------------
     /**
      * enables coin input
@@ -196,7 +203,7 @@ signals:
 
 
 Q_DECLARE_INTERFACE(DeviceControllerInterface,
-                    "eu.atb.ptu.plugin.DeviceControllerInterface/1.1.3")
+                    "eu.atb.ptu.plugin.DeviceControllerInterface/1.1.4")
 
 
 namespace nsDeviceControllerInterface {