For a long time already (c9326cc1ed), the documentation suggests a
different ordering of entries generated by *_conf_header than we
actually create. Finally fix this.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Was lost in the refactoring of a6b18abc8a.
Signed-off-by: Hannah Kiekens <hannah.kiekens@mind.be>
[Jan: refer to the causing commit]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Since a6b18abc8a, we only have a single Dockerfile and a --target
instead.
We actually also need to touch the unmodified proxy line, wrapping it
around, so that doc8 remains happy.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The current detection mechanism assumes that if the docker command
is available the engine behind is also docker. In fact nowadays a
lot of people use /usr/bin/docker as an alias for podman. In that
case the script expects a docker engine and misses to use
podman-specific settings.
To fix this, run "docker -v" and check if the output indicates a
podman engine or a real docker engine. Otherwise error out as the
enginge is not supported.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a test for cloning with KAS_REPO_REF_DIR.
It explicitly tests the case that two repos with a single upstream URI
are added and also tests mercurial.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
[Jan: ensure Python 3.5 compatibility]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a workaround for python versions < 3.8.
There, the dir created by TemporaryDirectory must still exist when
leaving the context manager.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch reworks the logic when setting KAS_REPO_REF_DIR.
When this variable is set, a two-staged clone is used:
First, a bare-clone (or similar) is created in the ref-dir, according to
the naming scheme. This clone is executed in a way that is both
reentrant as well as race-free across multiple instances of KAS working
on the same dir. Internally we clone into a tmpdir below the refdir and
rename on success to guarantee the atomicity of the operation on POSIX
compliant filesystems.
Second, the clone in the KAS_WORK_DIR is executed against the local
copy. After that, the origin url is redirected to the upstream url.
By that, the KAS_REPO_REF_DIR directory can be cached across builds
which significantly speedsup clone times against large repos.
In case the requested refspec is already in the cache (very likely in CI
builds), no direct access to the upstream repo is required. This logic
is crucial for CI systems in China, where e.g. access to github is
blocked from time to time.
The clone-from-local logic is currently only implemented for the git plugin
as HG misses the caching logic. Repo implementations that do not support this
logic can simply opt-out for the first stage by returning 'true'.
The existing user-facing logic of KAS_REPO_REF_DIR is not affected.
However, internally we no longer clone via --reference as this still
requires access to the remote repo, even if the requested commit is
already in the local copy.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch is a preparation for the cloning via reference logic.
Instead of handling the initial-clone specially, we just run the full
fetch_async logic. This is required as clones via a local mirror have a
different remote url which needs to be rewritten.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Only Ubuntu 20.04 is still supported with 3.5 and 3.6, so pin to it.
Expand the test to 3.10 and 3.11 at this chance. Quoting is needed now
to avoid that 3.10 becomes 3.1.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a test for the --resolve-env option in the dump plugin.
Both cases resolve and non-resolve are tested, each for yaml and json
output format.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds the option --resolve-env to the dump plugin.
When enabled, all variables in the 'env' section of the kas config file
are set to the captured value (at time of executing the dump plugin).
This helps to debug build issues on CI runners by precisely capturing
the relevant environment.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch extends the test of the dump plugin.
In addition, we test if relative refspecs are expanded and if the
generated output can be used as input to kas again.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a flag --resolve-refs to the dump plugin.
Once enabled, all relative refspecs (e.g. branch or tag names) are
resolved and replaced by their exact revision (before patches are
applied).
When re-running kas on the flattened and expanded config file, the build
is executed against exactly the versions of the dependencies that where
used when dumping the configuration. This helps to keep track of build
versions for future use (e.g. reproducible builds) or for
version-tracking tools like renovate.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a programmatic attribute 'revision' to the repo class.
This attribute contains the exact revision at the time of the checkout
of a repository. By that, we can avoid the ambiguity of refspecs
containing tags or branch names. Internally, the revision is not yet
used but just made available for future downstream users (e.g. plugins).
Note, that the revision has to be re-queried on each access, as the
Config class re-instantiates the repos for each consumer.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds support to use the dump plugin in kas-container.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a basic test of the dump plugin. We check if the configuration
is flattened and external references are included.
In addition, we check if no other files are referenced anymore.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a new plugin 'dump' which resolves all kas config
includes and combines them in a single file. The format of the output
file can either be JSON or YAML. In case of YAML, the generated config
fulfills the kas-config schema and can be used as input to kas again.
In addition, the generated files can be used by external tools to
analyse the dependencies and versions of the project.
While the generated configuration is semantically identical to the
input config, we do not guarantee binary compatibility as especially
YAML provides multiple ways to serialize strings and null values.
Not giving this guarantee makes it easier to evolve and maintain the plugin.
The plugin itself extends the checkout plugin, as referenced repos have
to be checked-out first to resolve cross-repo references. This also
requires, that the declared refspec of all referenced repos can actually
be found and checked out.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The kas-container trace / debug infrastructure has to write to stderr to
not interfer with kas output to stdout. Note, that the kas debug
messages already write to stderr. By that, the kas-container script can
be used in pipes similar to a direct invocation of kas.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch forwards the DISTRO_APT_PREMIRRORS environment variable into
the container when using the kas-container script. This variable is
commonly used to externally set mirrors for debian apt, e.g. in a CI
environment.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
These additional test cases check if the env section
can:
- export variables with their default value
- add variables with 'None' assigned only to
BB_ENV_PASSTHROUGH_ADDITIONS or to the deprecated
BB_ENV_EXTRAWHITE
- bitbake: make sure that variables actually make it into bitbake
The BB_ENV_EXTRAWHITE variable is still present, so a test case has also
been added for this.
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
[Jan: ensure python 3.5 compatibility, adjust copyright header]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Until now all environment variables in the kas config's
env section require a default value.
In some cases we want to rely on the weak assignment
of bitbake instead of relying on the default value of the
variable in the kas config.
This means if we assign the 'None' value or nothing to the variable
in the kas config then it is only added to BB_ENV_EXTRAWHITE or
BB_ENV_PASSTHROUGH_ADDITIONS without setting it as environment
variable.
Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com>
[Jan: fixed overlong line]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch forwards environment variables to control the concurrency and
parallelism of the build to bitbake.
With that, the user can reduce the concurrency in case of running short
on memory. Further, by reducing the concurrency on very large and NUMA
machines, the build sometimes can be significantly speed up.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch prevents deployment of the pip cache folder that is only
needed during installation. Which is also done with the apt,
where at the end of the install operation we delete the
cache and all temporary folders.
The reducion of the image size is insignificant:
| builder@1373d0b95f44:/build$ sudo du -sh /root/.cache/pip
| 1.6M /root/.cache/pip
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The install package list are actually taking 1:1 from their documentation,
so there some packages that can already installed by other downstream layers.
This will not change any image sizes on all the layers in use.
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Container engines per default log all container output into journald
(Podman) or a json file (Docker).
A build with kas-container/bitbake containes lots of useless build
output like progress lines, etc.
In case of Podman, where journald is used, this means that all this is
spammed into the journald buffer and possible also send to ttys or even
serial ttys. This might make sense for containers that output only
status information about running services, but for a build process, this
is mostly just spamming and causes important information to be lost.
Since the stdout/stderr output of the container is used for
kas-container ordinarily, the background logging from the container
image can be deactivated.
Therefor add the `--log-driver=none` parameter to all container
runtimes command lines.
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This moves poky to 4.0.3 and Isar to the next revision of the day. The
latter is needed as we have no release with sbuild support yet.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
While kas and kas-isar surely have a common ground like the kas tool
itself, kas-isar does not need all the toolchain packages that are
essential Yocto dependencies. Splitting up the images earlier allows to
shrink kas-isar by almost 400 MB.
Use this chance to model both images as different build stages of the
same Dockerfile. That is simpler than creating a temporary "kas-base"
image via a separate Dockerfile.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Prior to the official first release of kas, this was once introduced to
fulfill kernel build dependencies. That is not longer be needed with
modern Yocto versions (if it ever actually was).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
autoconf, automake, libtool were never official dependencies. Their
addition comes from the early Isar days, likely misunderstanding the
actual needs already back then.
e2fsprogs and multistrap were only needed up to Isar v0.5 from 2018.
It's fair to drop support for these historic versions now.
debhelper was added along sbuild support in 54ab356f9f but never
became an official upstream dependency - drop it again.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This is useful for people who start an interactive 'kas shell' and would
like to know the exact build command which 'kas build' would use.
Signed-off-by: Michael Adler <michael.adler@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The old procedure finally broke over a new distro version of the
maintainer. Migrate to twine for uploading, that seems to work fine.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch is an addendum to 54ab356f and removes
the external mount used for the schroot.
This is no longer required as the schroot is now
placed in TMPDIR which is already mounted from the host.
This patch does not break backward compatibility, as neither
an ISAR release nor a KAS release happened while this
code path was active.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
If no configuration file is specified, we try to load a single
.config.yaml from KAS_WORK_DIR and set the top_repo_path to the
repo root of this file with fallback to the containing directory.
This process is identical to loading explicitly specified
configuration files and can therefore be combined into one case.
Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
If we do not specify a configuration file for the "kas build" command,
the repository anchor is set to the current working directory,
which breaks the resolution of repo-relative include file paths
in the IncludeHandler class if repo root != current working directory.
Sets the repository anchor to the root path of the repository with
fallback to KAS_WORK_DIR if we use .config.yaml from KAS_WORK_DIR.
Signed-off-by: Johann Neuhauser <jneuhauser@dh-electronics.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Extend support for preserving the current environment to the
for-all-repos plugin with the --preserve-env flag.
This eases the usage of dynamic configuration done via environment
variables within the for-all-repos plugin, e.g. when calling a script.
Signed-off-by: Jasper Orschulko <jasper@fancydomain.eu>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
There is one remaining protected access in SetupReposStep: an assignment
to ctx.config._config. Replace this with a call to
ctx.config.find_missing_repos, which already handles this assignment.
Remove the TODO comment.
There is one remaining protected access in FinishSetupRepos: a read of
ctx.config._config for debugging purposes. Replace this with a call to
ctx.config.get_config(). Remove the TODO comment.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Add a new test to test_commands.py which:
* Has an incomplete definition of externalrepo
* Defines a local repository, subrepo
* Includes a file from subrepo
* The included file completes the definition of externalrepo
* It also attempts to include a file from externalrepo
This test previously failed with the error message "No such file or
directory: '.../test_commands/tests/test_layers/test.yml'"
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
There is a subtle bug in SetupReposStep that occurs when:
* One or more repositories are reported as "missing" in InitSetupRepos.
* SetupReposStep checks out the missing repositories.
* SetupReposStep updates the repo_dict with all repositories in the
configuration, some of which may only be partially defined and/or
not checked out.
* SetupReposStep passes this new, incorrect list of checked out
repositories to the include handler in the next pass.
* The include handler attempts to include a file from a partially
defined repository, likely resulting in a "File not found" error
because it is assumed to be a local repository.
To fix this, keep track of the repositories that have been checked out
by only adding repositories that have been reported as "missing" to
ctx.config.repo_dict
Now that ctx.config.repo_dict only contains checked out repositories, it
is necessary to check missing repo names against the config dict
instead.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
