Send W255 on restart CArun

... this prevents sending Operate "O000" in case of an opend door and
enables sending Operate "O000" after closing all doors because
'lastResult' has not changed.

src/ATBAPP/ATBDeviceControllerPlugin.cpp

@@ -30,13 +30,31 @@ ATBDeviceControllerPlugin::ATBDeviceControllerPlugin(QObject *parent)
     this->setParent(parent);
 
     this->pluginInfo = QString::fromUtf8(pluginInfoString.c_str());
+}
+
+ATBDeviceControllerPlugin::~ATBDeviceControllerPlugin() {}
+
+PLUGIN_STATE ATBDeviceControllerPlugin::initDCPlugin(QObject *eventReceiver, const QSettings & settings)
+{
+    this->eventReceiver = eventReceiver;
+
+    // read variables from setting
+    this->serialPortName = settings.value("ATBDeviceControllerPlugin/serialPort", "ttymxc2").toString();
+    QByteArray printerEncoding = settings.value("ATBDeviceControllerPlugin/printerEncoding", "ISO 8859-2").toString().toLatin1();
+    QString printerLocaleString = settings.value("ATBDeviceControllerPlugin/printerLocale", "de_DE").toString().toLatin1();
+    this->printerLocale = QLocale(printerLocaleString);
 
-    if (!this->private_loadCashAgentLib("")) {
-        return;
-    }
 
     this->init_sc_dbus();
 
+    QString persistentDataFile = "/mnt/system_data/dc_persistentData.dat";
+    this->persistentData = new PersistentData(persistentDataFile);
+
+
+    // setup libCA:
+    if (!this->private_loadCashAgentLib("")) {
+        return PLUGIN_STATE::NOT_INITIALIZED;
+    }
 
     //connect(dynamic_cast<QObject*>(hw), SIGNAL(hwapi_templatePrintFinished_OK()),  this, SLOT(onPrintFinishedOK()),  Qt::QueuedConnection);
     //connect(dynamic_cast<QObject*>(hw), SIGNAL(hwapi_templatePrintFinished_Err()), this, SLOT(onPrintFinishedERR()), Qt::QueuedConnection);
@@ -61,12 +79,11 @@ ATBDeviceControllerPlugin::ATBDeviceControllerPlugin(QObject *parent)
     dynamic_cast<QObject*>(hw)->moveToThread(hwThread);
     hwThread->start();
 
-    QString persistentDataFile = "/mnt/system_data/dc_persistentData.dat";
-    this->persistentData = new PersistentData(persistentDataFile);
-
     this->diag = new DeviceControllerDiag(this->persistentData, this);
     connect(this->diag, &DeviceControllerDiag::newVoltage, this, &ATBDeviceControllerPlugin::onNewVoltage);
 
+    int diagTimeout = settings.value("ATBDeviceControllerPlugin/diagTimeout", "45").toInt();
+    this->diag->setTimeout(diagTimeout);
 
     // currentSelectedTicketType - number of used "Kombiticket" (deprecated) use TICKET_VARIANT in future
     this->currentSelectedTicketType = 0;
@@ -75,19 +92,7 @@ ATBDeviceControllerPlugin::ATBDeviceControllerPlugin(QObject *parent)
     this->currentCashState = CASH_STATE::CACHE_EMPTY;
 
     this->cashStartAmountInt = 0;
-}
 
-ATBDeviceControllerPlugin::~ATBDeviceControllerPlugin() {}
-
-PLUGIN_STATE ATBDeviceControllerPlugin::initDCPlugin(QObject *eventReceiver, const QSettings & settings)
-{
-    this->eventReceiver = eventReceiver;
-
-    // read variables from setting
-    this->serialPortName = settings.value("ATBDeviceControllerPlugin/serialPort", "ttymxc2").toString();
-    QByteArray printerEncoding = settings.value("ATBDeviceControllerPlugin/printerEncoding", "ISO 8859-2").toString().toLatin1();
-    QString printerLocaleString = settings.value("ATBDeviceControllerPlugin/printerLocale", "de_DE").toString().toLatin1();
-    this->printerLocale = QLocale(printerLocaleString);
 
 
     if (this->isMaster) {
@@ -537,6 +542,8 @@ void ATBDeviceControllerPlugin::onCBinAndAllDoorsClosed()
 {
     qCritical() << "ATBDeviceControllerPlugin::onCBinAndAllDoorsClosed()";
 
+    this->diag->diagReInit();
+
     QTimer::singleShot(2000, this, SIGNAL(requestModeIDLE()));
 
     this->dbus->finishedBackgroundTask("DOOR_OPEN");
@@ -550,10 +557,14 @@ void ATBDeviceControllerPlugin::onAllDoorsClosed()
 {
     qCritical() << "ATBDeviceControllerPlugin::onAllDoorsClosed()";
 
+    if (this->diag->isErrorState()) {
+        emit this->requestModeOOO();
+    }
+    else {
         emit this->requestModeIDLE();
-    this->dbus->finishedBackgroundTask("DOOR_OPEN");
+    }
 
-    // TODO: check for errors and create a machine event
+    this->dbus->finishedBackgroundTask("DOOR_OPEN");    
 }
 
 void ATBDeviceControllerPlugin::onNewVoltage(uint32_t voltage)
@@ -643,10 +654,22 @@ void ATBDeviceControllerPlugin::requestPrintReceipt(const QHash<QString, QVarian
 
 void ATBDeviceControllerPlugin::requestPrintReceipt(const QString & printingString)
 {
-    QByteArray ba = printingString.toUtf8();
+    QByteArray ba_receipt = this->codec->fromUnicode(printingString);
+
+    //QByteArray ba = printingString.toUtf8();
     hw->prn_switchPower(true);
     hw->prn_setFonts(8,12,0,0);
-    hw->prn_sendText(&ba);
+    hw->prn_sendText(&ba_receipt);
+
+    // DEBUG
+    //qCritical() << "---------------------------------------------------------------";
+    //qCritical() << "ATBDeviceControllerPlugin::requestPrintReceipt()";
+    //qCritical() << "    receipt data:";
+    //qCritical() << QString(ba_receipt);
+    //qCritical() << "---------------------------------------------------------------";
+
+
+    this->printResultCheckCounter = 0;
     QTimer::singleShot(4000, this, SLOT(onPrinterWaitForPrintingReceipt()));
 
     //QTimer::singleShot(2000, this, [this](){ hw->prn_cut(3);  } );
@@ -695,7 +718,8 @@ void ATBDeviceControllerPlugin::onPrinterWaitForPrintingReceipt()
 
 void ATBDeviceControllerPlugin::requestPrintTicket(const QHash<QString, QVariant> & printingData)
 {
-    struct T_dynDat *dynTicketData = new T_dynDat;
+    struct T_dynDat dynamicTicketData;
+    struct T_dynDat *dynTicketData = &dynamicTicketData;
     memset(dynTicketData, 0, sizeof(*dynTicketData));
 
     qCritical() << "ATBDeviceControllerPlugin::requestPrintTicket( "         << endl
@@ -836,6 +860,7 @@ void ATBDeviceControllerPlugin::onPrinterDataPrepared()
 
     // note: calling prn_getPrintResult() immediately may result in wrong answer!
     // We have to wait "about some seconds" until calling this function!
+    this->printResultCheckCounter = 0;
     QTimer::singleShot(4000, this, SLOT(onPrinterWaitForPrintingTicket()));
 
     // old: use printer templates:
@@ -859,8 +884,17 @@ void ATBDeviceControllerPlugin::onPrinterWaitForPrintingTicket()
         this->onPrintFinishedERR();
         break;
     default:
+        // result value is not defined (-> workaround for DC misbehaviour)
+        if (this->printResultCheckCounter < 10) {
+            this->printResultCheckCounter++;
+            qCritical() << "DC print result undefined: " << printerResult;
+            QTimer::singleShot(1000, this, SLOT(onPrinterWaitForPrintingTicket()));
+        }
+        else {
             qCritical() << "DC Error: wait for printing";
             this->onPrintFinishedERR();
+        }
+
         break;
     }
 
@@ -888,6 +922,7 @@ void ATBDeviceControllerPlugin::onPrinterPrintNextTemplate()
 
     if (this->currentTicket->templateList()->isEmpty()) {
         // all templates are printed
+        this->printResultCheckCounter = 0;
         QTimer::singleShot(2000, this, SLOT(onPrinterWaitForPrintingTicket()));
     }
     else {
@@ -939,7 +974,8 @@ void ATBDeviceControllerPlugin::onPrinterPrepareDynTemplateData()
 }
 void ATBDeviceControllerPlugin::prepareDynTemplateData()
 {
-    struct T_dynDat *dynTicketData = new T_dynDat;
+    struct T_dynDat dynamicTicketData;
+    struct T_dynDat *dynTicketData = &dynamicTicketData;
     memset(dynTicketData, 0, sizeof(*dynTicketData));
 
     // setup dynTicketData dependent on currentTicket
@@ -958,6 +994,9 @@ void ATBDeviceControllerPlugin::prepareDynTemplateData()
     case nsDeviceControllerInterface::TICKET_VARIANT::STOP_RECEIPT:
         private_setupDynTemplatData_STOP_RECEIPT(dynTicketData, this->currentTicket);
         break;
+    case nsDeviceControllerInterface::TICKET_VARIANT::FINE_PAYMENT:
+        private_setupDynTemplatData_FINE_PAYMENT(dynTicketData, this->currentTicket);
+        break;
     case nsDeviceControllerInterface::TICKET_VARIANT::RECEIPT:
         break;
     case nsDeviceControllerInterface::TICKET_VARIANT::ERROR_RECEIPT:
@@ -1066,6 +1105,27 @@ void ATBDeviceControllerPlugin::private_setupDynTemplatData_FOOD_STAMP(struct T_
     qCritical() << "-------------------------------------------------------";
 }
 
+void ATBDeviceControllerPlugin::private_setupDynTemplatData_FINE_PAYMENT(struct T_dynDat *dynTicketData,   Ticket *ticket)
+{
+    QDateTime currentDateTime    = QDateTime::fromString(ticket->getPrintingData()["currentDateTime"].toString(), Qt::ISODate);
+
+    QString currentDateString    = this->printerLocale.toString(currentDateTime.date(),    QLocale::ShortFormat);
+
+
+    // set dynamic printer data:
+    QByteArray ba_licenseplate = codec->fromUnicode(ticket->getPrintingData()["licenseplate"].toString());
+    memcpy((char*)dynTicketData->licensePlate, ba_licenseplate.data(), std::min(ba_licenseplate.size(),8));
+
+    QByteArray ba_amount = codec->fromUnicode(ticket->getPrintingData()["amount"].toString());
+    memcpy((char*)dynTicketData->vendingPrice,  ba_amount.data(), std::min(ba_amount.size(),8));  // Szeged
+    memcpy((char*)dynTicketData->dynDat6,       ba_amount.data(), std::min(ba_amount.size(),8));  // Schoenau
+
+    QByteArray ba_currentDate = codec->fromUnicode(currentDateString);
+    memcpy((char*)dynTicketData->currentDate,   ba_currentDate.data(), std::min(ba_currentDate.size(),8));
+
+    QByteArray ba_ticketId = codec->fromUnicode(ticket->getPrintingData()["ticketId"].toString());
+    memcpy((char*)dynTicketData->dynDat7,       ba_amount.data(), std::min(ba_ticketId.size(),8));
+}
 
 
 /************************************************************************************************
@@ -1497,7 +1557,7 @@ int ATBDeviceControllerPlugin::init_sc_dbus()
 
 void ATBDeviceControllerPlugin::onWokeUp(uchar source)
 {
-    if (source == 0x01) {
+    if (source == 0x01 || source == 0xFE) {
         // woke up from device controller
         this->diag->diagRequest();
     }

src/ATBAPP/ATBDeviceControllerPlugin.h

@@ -129,6 +129,9 @@ private:
    // counts failed hw->log_chkIfVaultRecordAvailable()
    int accountCheckCounter;
 
+   // counts faild hw->prn-getPrintResult()
+   int printResultCheckCounter;
+
    // dbus
    int init_sc_dbus();
 
@@ -141,6 +144,7 @@ private:
    void private_setupDynTemplateData_START_RECEIPT(struct T_dynDat *dynTicketData, Ticket *ticket);
    void private_setupDynTemplatData_STOP_RECEIPT(struct T_dynDat *dynTicketData,   Ticket *ticket);
    void private_setupDynTemplatData_FOOD_STAMP(struct T_dynDat *dynTicketData,     Ticket *ticket);
+   void private_setupDynTemplatData_FINE_PAYMENT(struct T_dynDat *dynTicketData,   Ticket *ticket);
    // ---------------------------------------------------------------------------------------------
 
 private slots:

src/ATBAPP/DeviceControllerDiag.cpp

@@ -5,6 +5,11 @@
 #include <QUuid>
 #include <QDebug>
 
+#include <QProcess>
+
+#include "support/JSON.h"
+
+
 DeviceControllerDiag::DeviceControllerDiag(PersistentData *pData, QObject *parent)
     : QObject(parent)
     , coinProcessorType(nsDeviceControllerInterface::COIN_PROCESSOR::ESCROW)
@@ -13,10 +18,12 @@ DeviceControllerDiag::DeviceControllerDiag(PersistentData *pData, QObject *paren
     , isRequestRunning(false)
     , flagInterruptDiag(false)
     , lastState(DeviceController::State::INITIAL_STATE)
+    , _isErrorState(false)
     , pData(pData)
+    , E255counter(0)
 {
     diagRequestTimeoutTimer = new QTimer(this);
-    diagRequestTimeoutTimer->setInterval(1000*20);  // 20s
+    diagRequestTimeoutTimer->setInterval(1000*45);
     diagRequestTimeoutTimer->setSingleShot(true);
     connect(diagRequestTimeoutTimer, &QTimer::timeout, this, &DeviceControllerDiag::onDiagRequestTimeoutTimerTimeout);
 }
@@ -32,6 +39,17 @@ void DeviceControllerDiag::init(hwinf *hw, QObject* eventReceiver)
 }
 
 
+void DeviceControllerDiag::diagReInit()
+{
+    this->machineEventSet.clear();
+    this->_isErrorState = false;
+}
+
+void DeviceControllerDiag::setTimeout(int timeout)
+{
+    this->diagRequestTimeoutTimer->setInterval(1000 * timeout);
+}
+
 void DeviceControllerDiag::diagRequest()
 {
     qCritical() << "DeviceControllerDiag::diagRequest()";
@@ -63,6 +81,24 @@ void DeviceControllerDiag::onDiagRequestTimeoutTimerTimeout()
     this->flagInterruptDiag = true;
 }
 
+
+bool DeviceControllerDiag::isErrorState()
+{
+    return this->_isErrorState;
+}
+
+bool DeviceControllerDiag::isOperatingState()
+{
+    return !this->_isErrorState;
+}
+
+QSet<DeviceController::State> DeviceControllerDiag::getCurrentMachineState()
+{
+    return this->machineEventSet;
+}
+
+
+
 void DeviceControllerDiag::private_startDiag()
 {
     // check for DiagRequestTimeoutTimerTimeout:
@@ -71,6 +107,20 @@ void DeviceControllerDiag::private_startDiag()
         this->private_sendDiagEvent(DeviceController::State::E255);
         this->isRequestRunning  = false;
         this->flagInterruptDiag = false;
+        if (this->E255counter > 5) {
+            this->restartCArun();
+        }
+        else {
+            this->E255counter++;
+
+            // try it again, until success:
+            QTimer::singleShot(400, this, &DeviceControllerDiag::diagRequest);
+            /**
+             * But please note:
+             * - diag does currently not stop suspend (start a background task)
+             * - diag is called again in ModeOOO wokeup()
+             */
+        }
         return;
     }
 
@@ -105,6 +155,8 @@ void DeviceControllerDiag::sys_superviseSystem()
         this->private_sendDiagEvent(DeviceController::State::E255);
         this->flagInterruptDiag = false;
         this->isRequestRunning  = false;
+        if (this->E255counter > 5) { this->restartCArun(); }
+                              else { this->E255counter++; }
         return;
     }
 
@@ -115,6 +167,8 @@ void DeviceControllerDiag::sys_superviseSystem()
         this->private_sendDiagEvent(DeviceController::State::E254);
         this->diagRequestTimeoutTimer->stop();
         this->isRequestRunning  = false;
+        if (this->E255counter > 5) { this->restartCArun(); }
+                              else { this->E255counter++; }
         return;
     }
 
@@ -127,7 +181,7 @@ void DeviceControllerDiag::sys_superviseSystem()
     {
         // noch keine Testergebnisse
         if (dynMaCond.startupTestIsRunning) {
-            // TODO?
+            qCritical() << "            startupTestIsRunning --> call again";
         }
 
 
@@ -137,18 +191,6 @@ void DeviceControllerDiag::sys_superviseSystem()
         return;
     }
 
-    // all doors: 99: undefined  0:closed  1:open
-    if (dynMaCond.lowerDoor || dynMaCond.upperDoor) {
-        // Service or battery door is open, goto INTRUSION MODE
-        qCritical() << "DeviceControllerDiag::sys_superviseSystem() Service or battery door is open, goto INTRUSION MODE";
-        this->private_sendDiagEvent(DeviceController::State::E253);
-    }
-    if (dynMaCond.middleDoor) {
-        // vault door is open, goto INTRUSION MODE
-        qCritical() << "DeviceControllerDiag::sys_superviseSystem() vault door is open, goto INTRUSION MODE";
-        this->private_sendDiagEvent(DeviceController::State::E252);
-    }
-
     qCritical() << "      --> call  sub_componentAssessment()";
 
     sub_componentAssessment();
@@ -182,6 +224,21 @@ void DeviceControllerDiag::sub_componentAssessment()
         this->private_sendDiagEvent(DeviceController::State::A000);
     }
 
+    // check for open doors
+    // all doors: 99: undefined  0:closed  1:open
+    if (dynMaCond.lowerDoor || dynMaCond.upperDoor) {
+        // Service or battery door is open
+        flag_sendOperate = false;
+        qCritical() << "DeviceControllerDiag::sys_superviseSystem() Service or battery door is open, goto INTRUSION MODE";
+        this->private_sendDiagEvent(DeviceController::State::E253);
+    }
+    if (dynMaCond.middleDoor) {
+        // vault door is open
+        flag_sendOperate = false;
+        qCritical() << "DeviceControllerDiag::sys_superviseSystem() vault door is open, goto INTRUSION MODE";
+        this->private_sendDiagEvent(DeviceController::State::E252);
+    }
+
     // check for invalid states:
 
     if (modCond.rtc>=200) {
@@ -225,7 +282,8 @@ void DeviceControllerDiag::sub_componentAssessment()
         }
         if (modCond.coinEscrow>=200) {
             flag_sendOperate = false;
-            this->private_sendDiagEvent(DeviceController::State::E010);
+            // coinEscrow>200 is considered a warning:
+            this->private_sendDiagEvent(DeviceController::State::W010);
         }
     }
     // -----------------------------------------------------------------------------------------------
@@ -247,7 +305,8 @@ void DeviceControllerDiag::sub_componentAssessment()
     {
         if (modCond.coinEscrow>=200) {
             flag_sendOperate = false;
-            this->private_sendDiagEvent(DeviceController::State::E010);
+            // coinEscrow>200 is considered a warning:
+            this->private_sendDiagEvent(DeviceController::State::W010);
         }
         if (modCond.coinSafe==201)  { // full
             flag_sendOperate = false;
@@ -319,7 +378,7 @@ void DeviceControllerDiag::sub_componentAssessment()
     }
     if (modCond.temper>=200) {
         flag_sendOperate = false;
-        this->private_sendDiagEvent(DeviceController::State::E004);
+        this->private_sendDiagEvent(DeviceController::State::W004);
     }
 
     // check for warnings
@@ -393,58 +452,76 @@ void DeviceControllerDiag::private_sendDiagEvent(DeviceController::State result)
     case DeviceController::State::A000:   // alarm / intrusion
         eventClass = EVENT_CLASS::ALARM;
         parameter  = "alarm / intrusion";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E002:    // real time clock error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "real time clock error";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E003:   // voltage error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "voltage error";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E004:   // temperature error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "temperature error";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E007:    // coin safe full
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "coin safe full";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E008:    // bill acceptor full
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "bill acceptor full";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E009:    // no cash box
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "no cash box";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E010:    // coin escrow
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "coin escrow";
+        this->_isErrorState = true;
+        break;
+    case DeviceController::State::W010:    // coin escrow
+        eventClass = EVENT_CLASS::WARNING;
+        parameter  = "coin escrow";
         break;
     case DeviceController::State::E011:    // mem error int.ee.
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "mem error int.ee.";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E018:    // no paper
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "no paper";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E020:    // printer error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "printer error";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E025:    // coin blocker
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "coin blocker";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E026:    // error coin validator
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "error coin validator";
+        this->_isErrorState = true;
         break;
     case DeviceController::State::E034:    // mdb error
         eventClass = EVENT_CLASS::ERROR;
         parameter  = "mdb error";
+        this->_isErrorState = true;
         break;
 
     case DeviceController::State::E071:   // cash box change is ongoing
@@ -473,13 +550,12 @@ void DeviceControllerDiag::private_sendDiagEvent(DeviceController::State result)
         parameter  = "no valid data from DeviceController";
         break;
     case DeviceController::State::E255:   // no valid data from DeviceController
-        eventClass = EVENT_CLASS::STATE;
+        eventClass = EVENT_CLASS::ERROR;
-        parameter  = "";
+        parameter  = "no valid data from DeviceController";
-        qCritical() << "       ... ignore " << QMetaEnum::fromType<DeviceController::State>().valueToKey(result);
-        return;
         break;
     case DeviceController::State::O000:   // everything is fine
         this->machineEventSet.clear();
+        this->_isErrorState = false;
         eventClass = EVENT_CLASS::OPERATE;
         parameter  = "";
         if (this->lastState == DeviceController::State::O000) {
@@ -507,10 +583,24 @@ void DeviceControllerDiag::private_sendDiagEvent(DeviceController::State result)
         eventClass = EVENT_CLASS::WARNING;
         parameter  = "temperatur warning";
         break;
+    case DeviceController::State::W255:   // restart carun
+        eventClass = EVENT_CLASS::WARNING;
+        parameter  = "restart carun";
+        break;
     }
 
     this->lastState = result;
 
+    /**
+     * Variant: send 'parameter' as JSON:
+     *
+        JSON::setPrettySerialize(false);
+        JSON::JsonObject json = JSON::objectBuilder()
+                  ->set("description", parameter)
+            ->create();
+        QString parameterJsonString = JSON::serialize(json);
+    */
+
     ATBMachineEvent *machineEvent = new ATBMachineEvent(
                 eventId,
                 "DC",
@@ -521,10 +611,18 @@ void DeviceControllerDiag::private_sendDiagEvent(DeviceController::State result)
                 ""         // second level info
                 );
 
-    //emit diagResponse(machineEvent);
-
     QCoreApplication::postEvent(eventReceiver, machineEvent);
 
 }
 
 
+
+/**
+ * reset / restart / reinit deviceController
+ */
+void DeviceControllerDiag::restartCArun()
+{
+    this->E255counter = 0;
+    this->private_sendDiagEvent(DeviceController::State::W255);
+    QProcess::startDetached("/bin/systemctl", {"restart", "carun"});
+}

src/ATBAPP/DeviceControllerDiag.h

@@ -29,6 +29,7 @@ namespace DeviceController {
         E008,
         E009,
         E010,
+        W010,   // Coin Escrow
         E011,
 
         E018,
@@ -54,6 +55,8 @@ namespace DeviceController {
         W003,
         W004,
 
+        W255,
+
         INITIAL_STATE
     };
     Q_ENUM_NS(State)
@@ -72,9 +75,32 @@ public:
     nsDeviceControllerInterface::COIN_PROCESSOR coinProcessorType;
     nsDeviceControllerInterface::BILL_ACCEPTOR  billAcceptor;
 
+    /**
+     * return true, if machineEventSet contains an error
+     */
+    bool isErrorState();
+    bool isOperatingState();
+    QSet<DeviceController::State> getCurrentMachineState();
+
+    void setTimeout(int timeout);
+
 public slots:
+    /**
+     * start diag request
+     */
     void diagRequest();
 
+    /**
+     * reset / re-init diag request.
+     * Called e.g. when doors are closed.
+     */
+    void diagReInit();
+
+    /**
+     * reset / restart / reinit deviceController
+     */
+    void restartCArun();
+
 signals:
     void diagResponse(ATBMachineEvent* machineEvent);
 
@@ -95,9 +121,12 @@ private:
 
     DeviceController::State lastState;
     QSet<DeviceController::State> machineEventSet;
+    bool _isErrorState;
 
     PersistentData* pData;
 
+    int E255counter;
+
 private slots:
     void onDiagRequestTimeoutTimerTimeout();
 
@@ -106,7 +135,6 @@ private slots:
 
     void sys_superviseSystem();
 
-
 };
 
 #endif // DEVICECONTROLLERDIAG_H

src/ATBAPP/DeviceControllerInterface.h

@@ -203,7 +203,7 @@ signals:
 
 
 Q_DECLARE_INTERFACE(DeviceControllerInterface,
-                    "eu.atb.ptu.plugin.DeviceControllerInterface/1.1.4")
+                    "eu.atb.ptu.plugin.DeviceControllerInterface/1.1.5")
 
 
 namespace nsDeviceControllerInterface {
@@ -236,6 +236,7 @@ namespace nsDeviceControllerInterface {
         ERROR_RECEIPT,
         START_RECEIPT,   // e.g. Szeged Start
         STOP_RECEIPT,    // e.g. Szeged Stop
+        FINE_PAYMENT,    // e.g. Klaipeda
         FOOD_STAMP
     };
 

src/ATBAPP/support/Ticket.cpp

@@ -64,6 +64,9 @@ bool Ticket::initNew(TICKET_VARIANT ticketVariant, const QList<quint8> & templat
     case TICKET_VARIANT::STOP_RECEIPT:
         this->_templateList << 24 << 25 << 26;
         break;
+    case TICKET_VARIANT::FINE_PAYMENT:
+        this->_templateList << 24 << 25 << 26;
+        break;
     case TICKET_VARIANT::FOOD_STAMP:
          if (printingData.contains("dyn1_list")) {
             this->_hasTemplateDynData = true;
@@ -160,6 +163,9 @@ QDebug operator<<(QDebug debug, TICKET_VARIANT ticketVariant)
         case TICKET_VARIANT::STOP_RECEIPT:
             debug << "TICKET_VARIANT::STOP_RECEIPT";
             break;
+        case TICKET_VARIANT::FINE_PAYMENT:
+            debug << "TICKET_VARIANT::FINE_PAYMENT";
+            break;
         case TICKET_VARIANT::FOOD_STAMP:
             debug << "TICKET_VARIANT::FOOD_STAMP";
             break;