Minor: added debug output in error case

Read last message if only one command to device controller is active.
	Otherwise assume that the data is obsolete. Trigger the sending
	of a known test-response to find new valid data-stream.

dCArun/CArun.cpp

@@ -114,7 +114,7 @@ void CArun::chainControl(void)
     case SETUP_STEP::OPEN_SERIAL_PORT:
         qCritical() << "CArun: SETUP_STEP::OPEN_SERIAL_PORT";
         this->openSerialPort();
-        this->setupStep = SETUP_STEP::CHECK_VALID_DATA;
+        this->setupStep = SETUP_STEP::TEST_OPEN_PORT;
         this->timerChainCtrl->start();
         break;
     case SETUP_STEP::TEST_OPEN_PORT:
@@ -151,7 +151,7 @@ void CArun::chainControl(void)
 
         this->HWaccess->dc_autoRequest(1);
         this->setupStep = SETUP_STEP::CHECK_VALID_DATA;
-        this->timerChainCtrl->start();
+        this->timerChainCtrl->start(2000);
         break;
     case SETUP_STEP::CHECK_VALID_DATA:
         qCritical() << "CArun: SETUP_STEP::CHECK_VALID_DATA";

include/com.h

@@ -7,6 +7,7 @@
 //#include <QString>
 #include <QTimer>
 #include <QSerialPort>
+#include <QVector>
 #include "tslib.h"
 #include "controlBus.h"
 #include "interfaces.h"
@@ -32,6 +33,10 @@ class T_com : public QObject        //,  public QPlainTextEdit
 //    QSerialPort *CatSerial = nullptr;
     QSerialPort *CatSerial;
 
+    QVector<uint16_t> readCmds;     // list of active commands sent to DC
+
+
+
     //char oeffneSerialPort();
     char open_Serial_Port();
     void closeSerialPort();
@@ -61,6 +66,9 @@ public:
     bool readFromSerial(QByteArray &data, uint16_t &sendLength);
         // retval: true: data available
 
+    QVector<uint16_t> &getReadCmds() { return readCmds; }
+    QVector<uint16_t> const &getReadCmds() const { return readCmds; }
+
 /*
     uint8_t getAllPortPins(void);
         // rs232pins: all signals bitwise coded in one byte:

include/datIf.h

@@ -161,11 +161,15 @@ class T_datif : public QObject
         // blockNr=transmitted in WRITEADDRESS low byte
 
     int     datif_noResponseCtr;
+    int     datif_nowNewDyns;
+    int     datif_nowNewStats;
 
     T_prot *myDCIF;
     QTimer *datif_trigger;
     uint8_t selectedSlaveAddr;
 
+    bool waitForTestResponse = false;
+
 private slots:
     char datif_cycleSend();
     void StoredRecData();

include/prot.h

@@ -122,6 +122,9 @@ public:
                            uint8_t  *RdDlen, uint8_t *receivedData);
         // retval: data valid, only one time true
 
+    uint16_t getReadSource() { return readSource; } // readSource contains last command sent to device controller
+    T_com *getSerialPort() { return mySerialPort; } // utility function
+
 
 signals:
     void framerecieved();   //bool gotINdata);

src/com.cpp

@@ -20,13 +20,72 @@ void T_com::writeToSerial(const QByteArray &data, uint16_t sendLength)
 {
     sendBuffer=data;
     sendLen=sendLength;
-    if (CatSerial->isOpen())
-    {
-        //qDebug() << "sending..." << sendBuffer;
-        CatSerial->write(sendBuffer);
-    } else
-        qDebug() << "error sending, port is not open";
 
+    // logic: exactly one command is sent to DC. no other command can be sent
+    // until the respond has been read from the serial line.
+
+    static int errorCnt = 0;
+
+    if (readCmds.size() == 0) { // no other read command active: ok
+        if (CatSerial->isOpen())
+        {
+            if (CatSerial->error() != QSerialPort::NoError) {
+                qCritical() << __func__ << "" << __LINE__ << "ERROR on serial line" << CatSerial->errorString();
+                CatSerial->clearError();
+                qCritical() << __func__ << "" << __LINE__ << "cleared error on serial line";
+            }
+
+            if (!CatSerial->atEnd()) {
+                qCritical() << QString("ERROR %1 bytes available on serial line before write").arg(CatSerial->bytesAvailable());
+                qCritical() << CatSerial->readAll().toHex(':');
+                CatSerial->clear();
+                qCritical() << __func__ << "" << __LINE__ << "read all data from serial line";
+            }
+
+            QByteArray buffer(data);
+
+            int bytesToWrite = buffer.size();
+            while (bytesToWrite > 0 && !buffer.isEmpty()) {
+                int bytesWritten = CatSerial->write(buffer);
+                if (bytesWritten != -1) {
+                    bytesToWrite -= bytesWritten;
+                    buffer = buffer.right(bytesWritten);
+                } else {
+                    qCritical() << __func__ << ":" << __LINE__
+                                << QString("ERROR %1 for sending %2").arg(CatSerial->errorString()).arg(data.toHex(':').constData());
+                    CatSerial->clearError();
+                    qCritical() << __func__ << ":" << __LINE__ << "cleared error on serial line. returning ...";
+                    return;
+                }
+            }
+
+            // save last command sent.
+            readCmds.append(data.constData()[2]); // 2: index of the last command
+
+        } else {
+            qCritical() << __func__ << ":" << __LINE__
+                        << "ERROR sending" << data.toHex(':') << "port is not open";
+        }
+    } else {
+        qCritical() << __func__ << "" << __LINE__ << errorCnt << "ERROR about to send cmd" << QString("0x%1").arg((unsigned char)data.constData()[2], 0, 16);
+        qCritical() << __func__ << "" << __LINE__ << errorCnt << "ERROR detected active read cmds" << readCmds;
+        if (CatSerial->isOpen()) {
+            int availableBytes = CatSerial->bytesAvailable();
+            qCritical() << __func__ << "" << __LINE__ << "ERROR available bytes" << availableBytes;
+            if (availableBytes == 0) {
+                errorCnt += 1;
+                if (errorCnt > 20) {
+                    readCmds.clear();
+                    errorCnt = 0;
+                }
+            } else {
+                errorCnt = 0;
+            }
+        } else {
+            qCritical() << __func__ << ":" << __LINE__
+                        << "ERROR sending" << data.toHex(':') << "port is not open";
+        }
+    }
 }
 
 

src/datIf.cpp

@@ -6,6 +6,7 @@ History:
 
 */
 #include "datIf.h"
+#include "hwapi.h"
 #include "sendWRcmd.h"
 #include "controlBus.h"
 #include "storeINdata.h"
@@ -91,6 +92,8 @@ T_datif::T_datif(QObject *parent) : QObject(parent)
     epi_resetDcDataValid(1);        // data are not yet valid, no response from DC by now
 
     datif_noResponseCtr=0;
+    datif_nowNewDyns=0;
+    datif_nowNewStats=0;
 
     datif_repeatCtr=0;
     datif_cmdWasPerformed=0;    // 0: no response by now
@@ -151,13 +154,24 @@ char T_datif::datif_cycleSend()
     {
         //qDebug()  << "com port not available";    // wird ununterbrochen ausgegeben
         epi_resetDcDataValid(2);    // DC data not valid
+        datif_nowNewDyns=0;
+        datif_nowNewStats=0;
+
         return 0;
     }
 
     // supervise if DC data are valid
     datif_noResponseCtr++;         // inc every 20ms
-    if (datif_noResponseCtr>250)   // no life sign from device controller (DC) for about 3s
+    if (datif_noResponseCtr>50)   // no life sign from device controller (DC) for about a sec
+     {
         epi_resetDcDataValid(3);    // DC data has not updated for >=5s -> no longer valid!
+        datif_nowNewDyns=0;
+        datif_nowNewStats=0;
+
+    }
+    // 24.7.24 new, data are valid if dynamic machine conditions AND dyn machine states came in
+    if (datif_nowNewDyns && datif_nowNewStats && !epi_areDcDataValid() )
+        epi_setDcDataValid();
 
     // Ueberwachung ob ein oder mehrere Commands am Stueck erfolgreich waren
     if (gpi_wantToResetSupervision())
@@ -360,6 +374,9 @@ char T_datif::datif_cycleSend()
     {
         dif_scanStep=0;         // always start from beginning
         epi_resetDcDataValid(4);
+        datif_nowNewDyns=0;
+        datif_nowNewStats=0;
+
     }
 
     datif_cmdWasPerformed=0;    // 0: no response by now
@@ -384,7 +401,7 @@ char T_datif::sendINrequestsAutomatic(void)
     uint8_t datif_maxNrCommands=35, datif_sendNow;
 
     // send quicker while transaction is ongoing:
-    uint8_t datif_vendRequCommandList[15]={102,107,108,110,112,115,116,31,32,40,41,42,23,0,0};
+    uint8_t datif_vendRequCommandList[15]={102,107,108,110,112,115,116,30,31,32,40,41,42,23,0};
     uint8_t datif_maxVendingCmds=13;
 
     // special commands:
@@ -497,6 +514,8 @@ char T_datif::loadRecDataFromFrame()
         return 0;
     }
 
+    memset(receivedData, 0x00, sizeof(receivedData));
+
     ret=myDCIF->getReceivedInData(&SlaveAdr, &readSource, &readAddress,  &RdDleng, receivedData);
         // nur true wenn CommandState OK und readState OK
 
@@ -529,6 +548,55 @@ char T_datif::loadRecDataFromFrame()
 
     gpi_storeRecPayLoad(RdDleng, receivedData); //  save for host (user of hwapi)
 
+    if (myDCIF && myDCIF->getSerialPort()) {
+        QVector<uint16_t> &readCmds = myDCIF->getSerialPort()->getReadCmds();
+
+        if (readCmds.size() == 1) { // there can be only one command been sent to the DC
+            // the command number active at the moment must be the same as the saved one
+            if (readSource == myDCIF->getReadSource() && readSource == readCmds[0]) {
+                // maybe we have sent a explicit request for a test-response
+                if (waitForTestResponse) {
+                    qCritical() << __func__ << ":" << __LINE__ << "turn on auto-request";
+                    if (readCmds[0] == CMD2DC_TestSerial) {
+                        if (QString(QByteArray((char const *)receivedData, RdDleng)) == "< SlaveResponse") {
+                            waitForTestResponse = false;
+                            qCritical() << __func__ << ":" << __LINE__ << "turn on auto-request";
+                            ((hwapi *)parent())->dc_autoRequest(true); // return autorequest to true
+                        } else {
+                            qCritical() << __func__ << ":" << __LINE__ << "ERROR received wrong test-response"
+                                        << QString(QByteArray((char const *)receivedData, RdDleng));
+                        }
+                    }
+                } else {
+                    // usual handling of response
+                    // qCritical() << __func__ << ":" << __LINE__ << ":" << readSource << myDCIF->getReadSource() << readCmds[0];
+                    // qCritical() << __func__ << ":" << __LINE__ << ":" << QByteArray((char const *)receivedData, RdDleng).toHex(':');
+                }
+                readCmds.clear();
+            } else { // error
+                qCritical() << __func__ << ":" << __LINE__ << ": ERROR " << readSource << myDCIF->getReadSource() << readCmds[0];
+                qCritical() << __func__ << ":" << __LINE__ << ": ERROR length" << RdDleng << QString(", ignore data for cmd 0x%1").arg(readCmds[0], 0, 16)
+                            << QByteArray((char const *)receivedData, RdDleng).toHex(':');
+                readCmds.clear();
+                return 0;
+            }
+        } else {
+            // error: read commands has not size 1 as it should be: turn off
+            // auto requests and send explicit request for test-response:
+            // once this response has been received, turn on the autmatic requests
+            // again.
+            readCmds.clear();
+            if (parent()) {
+                qCritical() << __func__ << ":" << __LINE__ << "ERROR turn off auto-request";
+                qCritical() << __func__ << ":" << __LINE__ << "ERROR send request for test-response";
+                waitForTestResponse = true;
+                ((hwapi *)parent())->dc_autoRequest(false);
+                ((hwapi *)parent())->dc_requTestResponse();
+            }
+            return 0;
+        }
+    }
+
     // uint8_t nn;
     //qDebug() << "\n datif: got valid data, rdsrc:" << readSource << "  rdadd:" << readAddress
      //        << "  rdlen:" << RdDleng;
@@ -996,18 +1064,24 @@ char T_datif::loadRecDataFromFrame()
         uit2=uchar2uint(receivedData[7],receivedData[6]);  //  value of last coin
         //if (uitmp>0) // nur 1x bei neuer Münze  6.10.23 aendern:
                         // beim Wechsler hat die kleinste Muenze immer coin type 0!
+
         if (uitmp>10000 || uit2>10000)
         {
             uitmp=0;
             uit2=0;
         }
-        if ((newInsertedAmount != lastInsertedAmount) || uit2>0 )
-        {
-            gpi_storeCurrentPayment(newInsertedAmount, uitmp, uit2);
-            emit datif_gotNewCoin();    // OR BILL  if (uitmp & 0x8000)>0
-            //qDebug()<<"emit new coin";
-            lastInsertedAmount=newInsertedAmount;
-            //qCritical()<<"datif 112 store and emit new coin "<<newInsertedAmount<<" "<<uitmp<<" "<<uit2;
+
+        if (uit2==3 || uit2==5 || uit2==10 || uit2==20 || uit2==50 || uit2==100 || uit2==200 || uit2==500)
+         {
+            // valid coin
+            if ((newInsertedAmount != lastInsertedAmount) || uit2>0 )
+            {
+                gpi_storeCurrentPayment(newInsertedAmount, uitmp, uit2);
+                emit datif_gotNewCoin();    // OR BILL  if (uitmp & 0x8000)>0
+                //qDebug()<<"emit new coin";
+                lastInsertedAmount=newInsertedAmount;
+                //qCritical()<<"datif 112 store and emit new coin "<<newInsertedAmount<<" "<<uitmp<<" "<<uit2;
+            }
         }
 
         break;
@@ -1035,6 +1109,7 @@ char T_datif::loadRecDataFromFrame()
         if (RdDleng>28)
         {
             gpi_storeDeviceConditions(RdDleng, receivedData);
+            datif_nowNewStats=1;        // 24.7.24 new
         }
         break;
 
@@ -1043,9 +1118,9 @@ char T_datif::loadRecDataFromFrame()
 
         if (RdDleng>60)
         {
-            epi_setDcDataValid();    // DC-Data are valid as DC responded.
-                                        // Could be set to every response but this (31)
-                                        // is a very common and very important request
+            //epi_setDcDataValid();    // 24.7.24 remove here
+            datif_nowNewDyns=1;         // 24.7.24 new
+
             gpi_storeDynMachineConditions(RdDleng, receivedData);
 
             gpi_storeDI_CoinAttach(receivedData[6]);    // new, 14.2.24 needed for direct coin insertion

src/hwapi.cpp

@@ -56,7 +56,7 @@ hwapi::hwapi(QObject *parent) : QObject(parent)
 #error "SLAVE LIB COMPILED INTO MASTER"
 #endif
 
-        myDatif = new T_datif();    // für die  CAslave-Lib auskommentieren!
+        myDatif = new T_datif(this);    // für die  CAslave-Lib auskommentieren!
 
 #endif
 

src/prot.cpp

@@ -368,6 +368,9 @@ uint8_t recBuffer[FRAME_MAXLEN];
     // read from "VCP":
     mySerialPort->readFromSerial(Indata, recLength);
 //qDebug()<<"prot: got data " << recLength;
+
+    memset(recBuffer, 0x00, sizeof(recBuffer));
+
     if (recLength>FRAME_MAXLEN)
         recLength=FRAME_MAXLEN;
     for (int nn=0; nn<recLength; nn++)