ATBUpdateTool/UpdatePTUDevCtrl/update.cpp

#include "update.h"
#include "worker.h"
#include "utils.h"
#include "update_dc_event.h"
#include "mainwindow.h"

#include <QCoreApplication>
#include <QApplication>
#include <QFile>
#include <QTemporaryFile>
#include <QDebug>
#include <QTextStream>
#include <QRegularExpression>
#include <QRegExp>
#include <QApplication>

#if defined (Q_OS_UNIX) || defined (Q_OS_LINUX)
#include "unistd.h"
#endif

#include <DeviceController/interfaces.h>

#include <QSharedMemory>
#include <QScopedPointer>
#include <QDir>
#include <QThread>
#include <QDateTime>
#include <QPluginLoader>
#include <QMap>

#define UPDATE_OPKG                 (1)
#define UPDATE_DC                   (0)

static const QMap<QString, int> baudrateMap = {
  {"1200"   ,   0}, {"9600"   ,   1}, {"19200"  ,   2}, {"38400"  ,   3},
  {"57600"  ,   4}, {"115200" ,   5}
};

QPluginLoader Update::pluginLoader;

hwinf *Update::loadDCPlugin(QDir const &plugInDir, QString const &fname) {
    hwinf *hw = nullptr;
    if (plugInDir.exists()) {
        QString pluginLibName(fname);
        pluginLibName = plugInDir.absoluteFilePath(pluginLibName);
        QFileInfo info(pluginLibName);
        if (info.exists()) {
            pluginLibName = plugInDir.absoluteFilePath(pluginLibName);
            pluginLoader.setFileName(pluginLibName);
            // static QPluginLoader pluginLoader(pluginLibName);
            if (!pluginLoader.load()) {
                qCritical() << "in directory" << plugInDir.absolutePath();
                qCritical() << "cannot load plugin" << pluginLoader.fileName();
                qCritical() << pluginLoader.errorString();
            }

            qCritical() << "loadDCPlugin() plugin directory:" << plugInDir.absolutePath();
            qCritical() << "loadDCPlugin() plugin file name:" << pluginLoader.fileName();

            if (!pluginLoader.isLoaded()) {
                qCritical() << pluginLoader.errorString();
            }
            QObject *plugin = pluginLoader.instance();
            if (!plugin) {
                qCritical() << "cannot start instance";
            }
            if (! (hw = qobject_cast<hwinf *>(plugin))) {
                qCritical() << "cannot cast plugin" << plugin << "to hwinf";
            }
        } else {
            qCritical() << pluginLibName << "does not exist";
        }
    } else {
        qCritical() << "plugins directory" << plugInDir.absolutePath()
                    << "does not exist";
    }
    return hw;
}

bool Update::unloadDCPlugin() {
    if (pluginLoader.unload()) {
        qCritical() << "unloaded plugin" << pluginLoader.fileName();
        // Note: will re-instantiate the library !
        // QObject *rootObject = pluginLoader.instance();
        // if (rootObject) {
        //    qCritical() << "reloaded plugin: root object again available";
        //    return false;
        // }
        // qCritical()unloaded plugin: root object gone";
        return true;
    }
    return false;
}

class hwapi;
Update::Update(Worker *worker,
               QString customerRepository,
               QString customerNrStr,
               QString branchName,
               QString plugInDir,
               QString pluginName,
               QString workingDir,
               bool dryRun,
               QObject *parent,
               char const *serialInterface,
               char const *baudrate)
    : QObject(parent)
    , m_hw(loadDCPlugin(QDir(plugInDir), pluginName))
    , m_worker(worker)
    , m_serialInterface(serialInterface)
    , m_baudrate(baudrate)
    , m_customerRepository(customerRepository)
    , m_customerNrStr(customerNrStr)
    , m_branchName(branchName)
    , m_pluginName(pluginName)
    , m_workingDir(workingDir)
    , m_dryRun(dryRun)
    , m_sys_areDCdataValid(false) {

    if (!m_hw) {
        qCritical() << "(" << __func__ << ":" << __LINE__ << ") m_hw == nullptr -> ca-slave plugin not loaded";
    } else {
        int tries = 20;
        while ((m_sys_areDCdataValid = m_hw->sys_areDCdataValid()) == false) {
            // must deliver 'true', only then are all data from hwapi valid
            if (--tries < 0) {
                qCritical() << "ERROR!!! DC DATA NOT VALID -> CA-MASTER-PLUGIN NOT CONNECTED";
                break;
            }
            m_hw->dc_autoRequest(true);
            QThread::msleep(500);
        }

        qCritical() << "(" << __func__ << ":" << __LINE__ << ") m_sys_areDCDataValid ..."
                    << m_sys_areDCdataValid;

#if 0
        QObject const *obj = m_hw->getAPI();
        Q_ASSERT(obj != nullptr);

        QDebug critical = qCritical();
        critical << "connect() to onReportDCDownloadStatus() ...";
        if (!connect(obj,
                     SIGNAL(hwapi_reportDCDownloadStatus(QString const&)),
                     this,
                     SLOT(onReportDCDownloadStatus(QString const &)))) {
            critical << "FAILED";
        } else critical << "DONE";

        critical = qCritical();
        critical << "connect() to onReportDCDownloadSuccess() ...";
        if (!connect(obj,
            SIGNAL(hwapi_reportDCDownloadSuccess(QString const&)), this,
            SLOT(onReportDCDownloadSuccess(QString const &)))) {
            critical << "FAILED";
        } else critical << "DONE";

        critical = qCritical();
        critical << "connect() to onReportDCDownloadFailure() ...";
        if (!connect(obj,
            SIGNAL(hwapi_reportDCDownloadFailure(QString const &)), this,
            SLOT(onReportDCDownloadFailure(QString const &)))) {
            critical << "FAILED";
        } else critical << "DONE";
#endif
    }
}

Update::~Update() {
}

void Update::onReportDCDownloadStatus(QString const &status) {
    emit m_worker->showStatusMessage("DL", status);
}

void Update::onReportDCDownloadSuccess(QString const &msg) {
    qCritical() << "msg" << msg;
}

void Update::onReportDCDownloadFailure(QString const &errorMsg) {
    qCritical() << "msg" << errorMsg;
}



// br is a index into a table, used for historical reasons.
bool Update::openSerial(int br, QString baudrate, QString comPort) const {
    if (m_hw) {
        qDebug() << "opening serial" << br << baudrate << comPort << "...";
        if (m_hw->dc_openSerial(br, baudrate, comPort, 1) == true) { // 1 for connect
            Utils::printInfoMsg(
                QString("OPENING SERIAL %1").arg(br)
                      + " " + baudrate + " " + comPort + "...OK");

            // m_hw->dc_autoRequest(true);
            m_hw->dc_autoRequest(false);
            QThread::sleep(1);

            Utils::printInfoMsg(QString("IS PORT OPEN %1").arg(m_hw->dc_isPortOpen()));
            return true;
        }

        Utils::printCriticalErrorMsg(
            QString("OPENING SERIAL %1").arg(br)
                  + " " + baudrate + " " + comPort + "...FAILED");
    }
    return false;
}

void Update::closeSerial() const {
    qInfo() << "CLOSED SERIAL" << m_baudrate << m_serialInterface;
    if (m_hw) {
        m_hw->dc_closeSerial();
    }
}

bool Update::isSerialOpen() const {
    return m_hw ? m_hw->dc_isPortOpen() : false;
}

/*

 ///////////////////////////////////////////////////////////////////////////////
 //
 //                        USING THE DC BOOTLOADER
 //
 ///////////////////////////////////////////////////////////////////////////////

 1  :   bl_reboot()     // send to application, want DC2 to reset (in order to
                        // start the bootloader)
                        //
                        // NOTE: this function is NOT reliable !!! Sometimes it
                        // simply does not work, in which case bl_startBL,
                        // bl_checkBL and bl_isUp do not work as well.
                        // Alas, there is no feedback if bl_reboot worked!
                        //
                        // NOTE: this function can be called only once per
                        // minute, because once called again, the controller
                        // performs some self-checks consuming some time.
                        //
                        // NOTE: after a successful bl_reboot(), the device is
                        // waiting about 4 seconds in the bootloader. To stay in
                        // the bootloader, we have to send the command
                        // bl_startBL(), which is kind of a misnomer, as it
                        // should be bl_doNotLeaveBL().
                        //
 2  :   bl_startBL():   // send within 4s after DC power-on, otherwise
                        // bootloader is left.
                        //
                        // NOTE: a running bootloader is a MUST for the download
                        // process of a device controller firmware as it does
                        // the actual writing of the memory (the bl_reboot()
                        // from above erases the available memory).
                        //
 3  :   bl_check():     // send command to verify if bl is up
                        //
                        // NOTE: this command is kind of a request that we want
                        // to check if the bootloader is up. The device
                        // (actually the bootloader) responds with its version.
                        //
 4  :   bl_isUp():      // returns true if bl is up and running
                        //
                        // NOTE: we know what the bootloader version actually is
                        // as the bootloader does not change. By comparing the
                        // string received in the previous step with this known
                        // version string we know if the bootloader is up.
                        //
                        // NOTE FOR ALL PREVIOUS STEPS: execute them in their
                        // own slots each to be sure to receive any possible
                        // responds from the device.
                        //
 5  :   bl_sendAddress(blockNumber)
                        // send start address, nr of 64-byte block, start with 0
                        // will be sent only for following block-numbers:
                        // 0, 1024, 2048, 3072 and 4096, so basically every
                        // 64kByte.
                        // for other addresses nothing happens

 6  :   bl_wasSendingAddOK()
                        // return val:  0: no response by now
                        //              1: error
                        //             10: OK

 7  :   bl_sendDataBlock()
                        // send 64 byte from bin file

 8  :   bl_sendLastBlock()
                        // send this command after all data are transferred

 9  :   bl_wasSendingDataOK()
                        // return val:  0: no response by now
                        //              1: error
                        //             10: OK

 10 :   bl_stopBL()     // leave bl and start (the new) application
                        //
                        // NOTE: this function MUST work under all conditions.
                        // Alas, there is no direct result for this command, so
                        // the only way of knowing it was successful is to ask
                        // the device if the bootloader is still running.
                        // There is no problem to repeat this command until the
                        // bootloader is really not running anymore.
 */
bool Update::updateBinary(QString const &fileToSendToDC) {
    qInfo() << "UPDATING DEVICE CONTROLLER FIRMWARE BINARY" << fileToSendToDC;

    return false;

#if 0
    QFile fn(fileToSendToDC);
    if (!fn.exists()) {
        // output via CONSOLE() etc
        return false;
    }

    bool bl_isUp = false;
    if (m_hw->bl_completeStart()) {
        int cnt = 5;
        while (--cnt > 0) {
            if (m_hw->bl_isUp()) {
                bl_isUp = true;
                break;
            }
        }
    }

    if (!bl_isUp) {
        return false;
    }

    if (!m_hw->bl_storeFirmware(fileToSendToDC)) {
        m_hw->bl_stopBL();
        return false;
    }

    uint16_t const nrOfFirmwareBlocks = m_hw->bl_getNrOfFirmwareBlocks();

    for (uint16_t blockNr = 0; blockNr <= nrOfFirmwareBlocks; ++blockNr) {
        m_hw->bl_blockAutoLoad(blockNr);

        int sleepTime = 0;
        while (1) {
            if (sleepTime > 1500) {
                m_hw->bl_stopBL();
                return false;
            }

            int8_t const r = m_hw->bl_blockAutoResponse();

            // after every "bl_blockAutoLoad()" call this until response
            // retval  0: wait   1: OK, blk was sent    2: OK, transfer complete
            //         3: error despite repeating, cancel. probably bin file corrupted
            //      Max duration: 3x no response from BL = 900ms

            switch(r) {
            case 1:
            /* fall through */
            case 2:
                sleepTime = 0;
                break;
            case 0: {
                QThread::msleep(100);
                sleepTime += 100;
            } break;
            case 3:
                m_hw->bl_stopBL();
                return false;
            default:
                m_hw->bl_stopBL();
                return false; // unknown error code
            }
        }

        m_hw->bl_stopBL();
    }

    return true;
#endif
}

QString Update::jsonType(enum FileTypeJson type) {
    switch (type) {
    case FileTypeJson::CASH: return "CASH";
    case FileTypeJson::CONFIG: return "CONFIG";
    case FileTypeJson::PRINTER: return "PRINTER";
    case FileTypeJson::SERIAL: return "SERIAL";
    case FileTypeJson::DEVICE: return "DEVICE";
    case FileTypeJson::TIME: return "TIME";
    }
    return "N/A";
}

bool Update::downloadJson(enum FileTypeJson type,
                          int templateIdx,
                          QString jsFileToSendToDC) const {

    if (m_hw) {
        m_hw->dc_autoRequest(true); // downloading Json needs the AutoEmission flag
        qDebug() << "SET AUTO-REQUEST=TRUE";
        QThread::sleep(1);  // make sure the auto-request flag is acknowledged

        QStringList lst;
        bool ready = false;
        int nTry = 25;
        while ((ready = m_hw->sys_ready4sending()) == false) {
            QThread::msleep(200);
            if (--nTry <= 0) {
                QString msg("SYS NOT READY FOR SENDING AFTER 5 SECONDS");
                Utils::printCriticalErrorMsg(msg);
                lst << msg;

                if (m_worker) {
                    m_worker->ISMAS(lst) << (m_worker->GUI(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_JSON_FILE_FAILURE));
                }
                break;
            }
        }

        lst.clear();
        if (ready) {
            QString msg;
            QFile file(jsFileToSendToDC);
            QFileInfo fi(jsFileToSendToDC); // max. size of template file is 800 bytes
            if (file.exists()) {
                if (file.open(QIODevice::ReadOnly)) {
                    if (fi.size() > 0 && fi.size() <= 800) {
                        QByteArray ba = file.readAll();

                        // kindOfFile: 1=config, 2=device, 3=cash, 4=serial, 5=time, 6=printer
                        //      nrOfTemplate=1...32 if kindOfFile==6
                        //      content = content of the Json file, max 800byte ascii signs

                        // type == kindOfFile
                        if (m_hw->sys_sendJsonFileToDc((uint8_t)(type),
                                                       templateIdx,
                                                       (uint8_t *)ba.data())) {

                            /*
                             *  Note: the machine id is contained in DC2C_conf.json.
                             *  The idea was to use this to check if the download of
                             *  the json-file was correct. It did not work, as the
                             *  update of the PSA (to reflect a change in the
                             *  machine id) did not happen immediately.
                             *
                                m_hw->dc_autoRequest(true);
                                QThread::msleep(500);

                                // testing
                                m_hw->request_ReadbackMachineID();
                                QThread::msleep(500);

                                uint8_t data[64];
                                memset(data, 0x00, sizeof(data));
                                uint8_t length = 0;

                                m_hw->readback_machineIDdata(&length, data);

                                QThread::msleep(500);

                                QByteArray ba((const char*)data, length);

                                qCritical() << length << "MACHINE ID =" << ba.toHex(':');
                            */

                            if (m_worker) {
                                lst.clear();
                                if (templateIdx >= 1 && templateIdx <= 32) {
                                    lst << QString("LOADED %1 (%2) TO DC").arg(fi.fileName()).arg(templateIdx);
                                } else {
                                    lst << QString("LOADED %1 (%2) TO DC").arg(fi.fileName()).arg((uint8_t)type);
                                }
                                m_worker->ISMAS(lst) << (m_worker->GUI(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_JSON_FILE));
                            }
                        } else {
                            msg = QString("ERROR SEND JSON-FILE %1 TO DC").arg(file.fileName());
                            Utils::printCriticalErrorMsg(msg);
                            lst << msg;
                            if (m_worker) {
                                m_worker->GUI(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_JSON_FILE_FAILURE);
                            }
                        }
                    } else {
                        msg = QString("SIZE OF %1 TOO BIG (%2 BYTES)").arg(jsFileToSendToDC).arg(fi.size());
                        Utils::printCriticalErrorMsg(msg);
                        lst << msg;
                        if (m_worker) {
                            m_worker->GUI(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_JSON_FILE_FAILURE);
                        }
                    }
                } else {
                    msg = QString("CAN NOT OPEN ") + jsFileToSendToDC + " FOR READING";
                    Utils::printCriticalErrorMsg(msg);
                    lst << msg;

                    if (m_worker) {
                        m_worker->GUI(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_JSON_FILE_FAILURE);
                    }
                }
            } else {
                msg = QString(jsFileToSendToDC) + " DOES NOT EXIST";
                Utils::printCriticalErrorMsg(msg);
                lst << msg;

                if (m_worker) {
                    m_worker->GUI(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_JSON_FILE_FAILURE);
                }
            }
        }

        m_hw->dc_autoRequest(false);
        qDebug() << "SET AUTO-REQUEST=FALSE";
        QThread::sleep(1);  // make sure the auto-request flag is acknowledged
    }

    return true;
}

bool Update::updatePrinterTemplate(int templateIdx, QString jsFile) const {
    return downloadJson(FileTypeJson::PRINTER, templateIdx, jsFile);
}

bool Update::updateConfig(QString jsFile) {
    // IMPORTANT: the JSON-file has a 'title'-line: the value MUST be 'DC2C_config'
    return downloadJson(FileTypeJson::CONFIG, 0, jsFile);
}

bool Update::updateCashConf(QString jsFile) {
    // IMPORTANT: the JSON-file has a 'title'-line: the value MUST be 'DC2C_cash  '
    // Note the twp spaces after DC2C_cash !!
    return downloadJson(FileTypeJson::CASH, 0, jsFile);
}

bool Update::updateDeviceConf(QString jsFile) {
    // IMPORTANT: the JSON-file has a 'title'-line: the value MUST be 'DC2C_device'
    return downloadJson(FileTypeJson::DEVICE, 0, jsFile);
}

QStringList Update::split(QString line, QChar sep) {
    QStringList lst;
    QString next;
    int start = 0, end;

    while ((end = line.indexOf(sep, start)) != -1) {
        next = line.mid(start, end - start).trimmed();
        lst << next;
        start = end + 1;
    }
    next = line.mid(start, end - start).trimmed();
    lst << next;

    return lst;
}

void Update::readyReadStandardOutput() {
    QProcess *p = (QProcess *)sender();
    QByteArray buf = p->readAllStandardOutput();
    qCritical() << buf;
}

void Update::readyReadStandardError() {
    QProcess *p = (QProcess *)sender();
    QByteArray buf = p->readAllStandardError();
    qCritical() << buf;
}

void Update::finished(int /*exitCode*/, QProcess::ExitStatus /*exitStatus*/) {
    QProcess *p = (QProcess *)sender();
    disconnect(p, SIGNAL(finished(int,QProcess::ExitStatus)), this, SLOT(readyReadStandardOutput()));
    disconnect(p, SIGNAL(finished(int,QProcess::ExitStatus)), this, SLOT(readyReadStandardError()));
}

QStringList Update::getDcSoftAndHardWareVersion() {
    if (m_hw) {
        m_hw->dc_autoRequest(true);
        QThread::sleep(1); // make sure the timer-slots are active

        for (int i=0; i < 3; ++i) { // send explicit reuests to get
                                    // current SW/HW-versions
            m_hw->request_DC2_SWversion();
            m_hw->request_DC2_HWversion();
            QThread::sleep(1);
        }

        QString const &hwVersion = m_hw->dc_getHWversion().toLower().trimmed();
        QString const &swVersion = m_hw->dc_getSWversion().toLower().trimmed();

        m_hw->dc_autoRequest(false);
        QThread::sleep(1); // make sure the timer-slots are inactive

        if (!hwVersion.isEmpty() && !swVersion.isEmpty()) {
            return QStringList() << hwVersion << swVersion;
        }
    }

    return QStringList() << "DC HW-version not available"
                         << "DC SW-version not available";
}

QString Update::getFileVersion(QString const& jsonFileName) {
    // "version":"15.10.2023 14:55 02.00.06",
    static const QRegularExpression re("^.*(\\\"[Vv]ersion\\\":)([\\s\\\"]{0,})([^,\\\"]{0,}).*$");

    QString fileVersion("");
    QFile inputFile(QDir::cleanPath(m_customerRepository + QDir::separator() + jsonFileName));

    if (inputFile.exists()) {
        if (inputFile.open(QIODevice::ReadOnly)) {
           QTextStream in(&inputFile);
           while (!in.atEnd()) {
              QString line = in.readLine();

              QRegularExpressionMatch match;
              int idx = line.indexOf(re, 0, &match);
              if (idx != -1) {
                  int const lastCaptured = match.lastCapturedIndex();
                  // the dc only sends 16 Byte
                  fileVersion = match.captured(lastCaptured);
                  fileVersion.truncate(16);
                  break;
              }
           }
           inputFile.close();
        }
    } else {
        // qCritical() << "ERROR" << inputFile.fileName() << "does not exist";
    }

    return fileVersion;
}

bool Update::checkDownloadedJsonVersions(QStringList const& jsonFileNames) {

    for (QStringList::size_type i=0; i < jsonFileNames.size(); ++i) {

        uint8_t jsonNr = 0;

        QString const &fName = jsonFileNames[i];

        // send one request for every single version
        // jsonNr=1...36, 1=config file (cust.Nr) 2=devices  3=cash  4=res.
        //      6=printer template 1 ..... 36= template 32

        if (fName.endsWith("conf.json")) {
            jsonNr = 1;
        } else
        if (fName.endsWith("device.json")) {
            jsonNr = 2;
        } else
        if (fName.endsWith("cash.json")) {
            jsonNr = 3;
        } else {
            QRegularExpressionMatch match;
            static const QRegularExpression re("^(.*print)([0-3][0-9])\\.json\\s*$");
            int idx = fName.indexOf(re, 0, &match);
            if (idx != -1) {
                QString captured = match.captured(match.lastCapturedIndex());
                bool ok = false;
                int n = captured.toInt(&ok);
                if (ok) {
                    // note: the '5' is correct
                    jsonNr = n + 5;
                }
            }
        }

        if (jsonNr != 0) {
            // send one request for every single version
            // jsonNr=1...36, 1=config file (cust.Nr) 2=devices  3=cash  4=res.
            //      5=printer template 1 ..... 36= template 32

            m_hw->sys_requestJsonVersions(jsonNr);
            QThread::msleep(500);

            char buf[64];
            memset(buf, 0x00, sizeof(buf));
            m_hw->sys_getJsonVersions(jsonNr, buf);
            buf[16] = '\0'; // the DC only handles 16 bytes

            static const QByteArray cb(16, (char)0xff);

            QString const installedVersion(QString::fromStdString(buf));
            QString const fileVersion = getFileVersion(jsonFileNames[i]);

            QFileInfo fi(jsonFileNames[i]);

            qCritical() << endl;
            qCritical() << "                json request nr:" << jsonNr;

            if (installedVersion == fileVersion) {
                qCritical() << "                      json file:" << fi.fileName();
                qCritical() << "        installed version in DC:" << installedVersion;
            } else
            if (cb == QByteArray(buf) && fileVersion == "") {
                qCritical() << "unknown json file (repo and DC):" << fi.fileName();
            } else {
                qCritical() << "                      json file:" << fi.fileName();
                qCritical() << "        installed version in DC:" << installedVersion;
                qCritical() << "     file version in repository:" << fileVersion;
            }

        } else {
            qCritical() << "CANNOT FIND JSON-NR FOR" << fName;
        }
    }

    return false;
}

QMap<QString, QString>
Update::getInstalledJsonVersions(QStringList const& jsonFileNames) {
    QMap<QString, QString> map;

    if (!m_hw) {
        qCritical() << "(" << __func__ << ":" << __LINE__ << "):"
                    << "ERROR!!! m_hw == nullptr";
        return map;
    }

    int tries = 20;
    while ((m_sys_areDCdataValid = m_hw->sys_areDCdataValid()) == false) {
        // must deliver 'true', only then are all data from hwapi valid
        if (--tries < 0) {
            qCritical() << "(" << __func__ << ":" << __LINE__ << "):"
                        << "ERROR!!! DC DATA NOT VALID -> CA-SLAVE-PLUGIN NOT CONNECTED";
            return map;
        }
        qCritical() << "(" << __func__ << ":" << __LINE__ << "):"
                    << "ERROR!!! DC DATA NOT VALID -> CA-SLAVE-PLUGIN NOT CONNECTED (" << tries << ")";
        m_hw->dc_autoRequest(true);
        QThread::msleep(500);
    }

    for (QStringList::size_type i=0; i < jsonFileNames.size(); ++i) {

        uint8_t jsonNr = 0;

        QString const &fName = jsonFileNames[i];

        // send one request for every single version
        // jsonNr=1...36, 1=config file (cust.Nr) 2=devices  3=cash  4=res.
        //      6=printer template 1 ..... 36= template 32

        if (fName.endsWith("conf.json")) {
            jsonNr = 1;
        } else
        if (fName.endsWith("device.json")) {
            jsonNr = 2;
        } else
        if (fName.endsWith("cash.json")) {
            jsonNr = 3;
        } else {
            QRegularExpressionMatch match;
            static const QRegularExpression re("^(.*print)([0-3][0-9])\\.json\\s*$");
            int idx = fName.indexOf(re, 0, &match);
            if (idx != -1) {
                QString captured = match.captured(match.lastCapturedIndex());
                bool ok = false;
                int n = captured.toInt(&ok);
                if (ok) {
                    // note: use 5 (instead of 4 -> index has been shifted)
                    jsonNr = n + 5;
                }
            }
        }

        if (jsonNr != 0) {
            // send one request for every single version
            // jsonNr=1...36, 1=config file (cust.Nr) 2=devices  3=cash  4=res.
            //      5=printer template 1 ..... 36= template 32

            m_hw->sys_requestJsonVersions(jsonNr);
            QThread::msleep(500);

            char buf[64];
            memset(buf, 0x00, sizeof(buf));
            m_hw->sys_getJsonVersions(jsonNr, buf);
            buf[16] = '\0'; // the DC only handles 16 bytes

            static const QByteArray cb(16, (char)0xff);

            QString const installedVersion(QString::fromStdString(buf));
            QString const fileVersion = getFileVersion(jsonFileNames[i]);

            QFileInfo fi(jsonFileNames[i]);

            if (cb == QByteArray(buf)) {
                map.insert(fi.fileName(), "inst.vers.not.avail");
            } else {
                map.insert(fi.fileName(), installedVersion);
            }

            qCritical() << endl;
            qCritical() << "                json request nr:" << jsonNr;

            if (installedVersion == fileVersion) {
                qCritical() << "                      json file:" << fi.fileName();
                qCritical() << "        installed version in DC:" << installedVersion;
            } else
            if (cb == QByteArray(buf) && fileVersion == "") {
                qCritical() << "unknown json file (repo and DC):" << fi.fileName();
            } else {
                qCritical() << "                      json file:" << fi.fileName();
                qCritical() << "        installed version in DC:" << installedVersion;
                qCritical() << "     file version in repository:" << fileVersion;
            }

        } else {
            qCritical() << "CANNOT FIND JSON-NR FOR" << fName;
        }
    }

    return map;
}

bool Update::doUpdate(int &displayIndex, QStringList const &filesToWorkOn) {

    if (!m_hw) {
        Utils::printInfoMsg("CA-PLUGIN NOT LOADED");
        return false;
    }

    int tries = 20;
    while ((m_sys_areDCdataValid = m_hw->sys_areDCdataValid()) == false) {
        // must deliver 'true', only then are all data from hwapi valid
        if (--tries < 0) {
            Utils::printCriticalErrorMsg("ERROR!!! DC DATA NOT VALID -> CA-SLAVE-PLUGIN NOT CONNECTED");
            return false;
        }
        Utils::printCriticalErrorMsg("DC DATA NOT VALID -> CA-SLAVE-PLUGIN NOT CONNECTED");
        m_hw->dc_autoRequest(true);
        QThread::msleep(500);
    }

    bool res = false;
    bool dcDownloadPossible = true;

    QList<QString>::const_iterator it;
    for (it = filesToWorkOn.cbegin(); it != filesToWorkOn.cend(); ++it) {
        m_worker->startProgressLoop();
        QString const &fToWorkOn = QDir::cleanPath(m_customerRepository + QDir::separator() + it->trimmed());
        if (fToWorkOn.endsWith("/dc2c.bin") && dcDownloadPossible) {
#if 0
            // download for dc possible only once
            // download of device-controller should always be the last step
            dcDownloadPossible = false;

            if (!m_hw->dcDownloadRequest(fToWorkOn)) {  // initiate download process
                qCritical() << "DOWNLOAD-REQUEST-ERROR FOR" << fToWorkOn;
                continue;
            }

            QThread::sleep(2);

            int tries = 5;
            while (!m_hw->dcDownloadRunning()) { // may take some time
                if (--tries < 0) {
                    qCritical() << QDateTime::currentDateTime().toString(Qt::ISODate)
                                << "(" << __func__ << ":" << __LINE__ << ") DOWNLOAD NOT RUNNING";
                    break;
                }
                QThread::sleep(1);
                continue;
            }

            qCritical() << QDateTime::currentDateTime().toString(Qt::ISODate)
                        << "(" << __func__ << ":" << __LINE__ << ") DOWNLOAD RUNNING";

            QThread::sleep(2);

            tries = 5;
            while (!m_hw->dcDownloadReportThreadStart()) { // may take some time
                if (--tries < 0) {
                    qCritical() << QDateTime::currentDateTime().toString(Qt::ISODate)
                                << "(" << __func__ << ":" << __LINE__ << ") REPORT THREAD NOT STARTED";
                    break;
                }
                continue;
            }

            qCritical() << QDateTime::currentDateTime().toString(Qt::ISODate)
                        << "(" << __func__ << ":" << __LINE__ << ") REPORT THREAD STARTED";

            QThread::sleep(2);

            tries = 5;
            while (!m_hw->dcDownloadReportRunning()) {     // may take some time
                if (--tries < 0) {
                    qCritical() << QDateTime::currentDateTime().toString(Qt::ISODate)
                                << "(" << __func__ << ":" << __LINE__ << ") DOWNLOAD REPORT NOT RUNNING";
                    break;
                }
                continue;
            }

            qCritical() << QDateTime::currentDateTime().toString(Qt::ISODate)
                        << "(" << __func__ << ":" << __LINE__ << ") DOWNLOAD REPORT RUNNING";

            tries = 1200;
            while (m_hw->dcDownloadReportRunning()) {
                QThread::msleep(1000);
                if (--tries < 0) {
                    qCritical() << QDateTime::currentDateTime().toString(Qt::ISODate)
                                << "(" << __func__ << ":" << __LINE__
                                << ") DOWNLOAD REPORT STILL RUNNING AFTER 20mins";
                    break;
                }
            }
#endif
            bool updateBinaryRes = true;

            // CONSOLE()
#if 0
            m_hw->dc_autoRequest(false);// default: turn auto-request setting off
            QThread::sleep(1);          // wait to be sure that there are no more
                                        // commands sent to dc-hardware

            if ((updateBinaryRes = updateBinary(fToWorkOn)) == true) {

                // qCritical() << "downloaded binary" << fToWorkOn;

                ++displayIndex;
                emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(2, ' ') + QString(")")
                    + QString(" Update ") + QFileInfo(fToWorkOn).fileName(),
                    Worker::UPDATE_STEP_DONE);
            }

            m_hw->dc_autoRequest(true); // turn auto-request setting on

            // qInfo() << "SET AUTO-REQUEST=TRUE";

            QStringList const &versions = Update::getDcSoftAndHardWareVersion();
            if (versions.size() >= 2) {
                if (updateBinaryRes == true) {
                    qInfo() << "dc-hardware-version (UPDATED)" << versions[0];
                    qInfo() << "dc-firmware-version (UPDATED)" << versions[1];
                } else {
                    qInfo() << "dc-hardware-version (NOT UPDATED)" << versions[0];
                    qInfo() << "dc-firmware-version (NOT UPDATED)" << versions[1];
                }
            }
#endif
            res = updateBinaryRes;

        } else if (fToWorkOn.contains("DC2C_print", Qt::CaseInsensitive)
                && fToWorkOn.endsWith(".json", Qt::CaseInsensitive)) {
            res = true;
            int i = fToWorkOn.indexOf("DC2C_print", Qt::CaseInsensitive);
            int const templateIdx = fToWorkOn.mid(i).midRef(10, 2).toInt();
            if ((templateIdx < 1) || (templateIdx > 32)) {
                qCritical() << "WRONG TEMPLATE INDEX" << templateIdx;
                res = false;
            } else {
                if ((res = updatePrinterTemplate(templateIdx, fToWorkOn))) {
                    if (m_worker) {
                        QStringList lst(QString("DL:%1 (%2)").arg(QFileInfo(fToWorkOn).fileName()).arg(templateIdx));
                        m_worker->ISMAS(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_JSON_FILE_SUCCESS);

                        ++displayIndex;
                        emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(3, ' ') + QString(")")
                              + QString(" Update ") + QFileInfo(fToWorkOn).fileName(),
                                Worker::UPDATE_STEP_DONE);
                    }
                }
            }
        } else if (fToWorkOn.contains("DC2C_cash", Qt::CaseInsensitive)
                && fToWorkOn.endsWith(".json", Qt::CaseInsensitive)) {
            res = true;
            if ((res = updateCashConf(fToWorkOn))) {
                if (m_worker) {
                    QStringList lst(QString("DL:%1").arg(QFileInfo(fToWorkOn).fileName()));
                    m_worker->ISMAS(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_CASH_FILE_SUCCESS);

                    ++displayIndex;
                    emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(3, ' ') + QString(")")
                          + QString(" Update ") + QFileInfo(fToWorkOn).fileName(),
                            Worker::UPDATE_STEP_DONE);
                }
            }
        } else if (fToWorkOn.contains("DC2C_conf", Qt::CaseInsensitive)
                && fToWorkOn.endsWith(".json", Qt::CaseInsensitive)) {
            res = true;
            if ((res= updateConfig(fToWorkOn))) {
                if (m_worker) {
                    QStringList lst(QString("DL:%1").arg(QFileInfo(fToWorkOn).fileName()));
                    m_worker->ISMAS(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_CONFIG_FILE_SUCCESS);

                    ++displayIndex;
                    emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(3, ' ') + QString(")")
                          + QString(" Update ") + QFileInfo(fToWorkOn).fileName(),
                            Worker::UPDATE_STEP_DONE);
                }
            }
        } else if (fToWorkOn.contains("DC2C_device", Qt::CaseInsensitive)
                && fToWorkOn.endsWith(".json", Qt::CaseInsensitive)) {
            res = true;
            if ((res = updateDeviceConf(fToWorkOn))) {
                if (m_worker) {
                    QStringList lst(QString("DL:%1").arg(QFileInfo(fToWorkOn).fileName()));
                    m_worker->ISMAS(lst) << (m_worker->CONSOLE(lst) << Worker::UPDATE_STEP::DOWNLOAD_DEVICE_FILE_SUCCESS);

                    ++displayIndex;
                    emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(3, ' ') + QString(")")
                          + QString(" Update ") + QFileInfo(fToWorkOn).fileName(),
                            Worker::UPDATE_STEP_DONE);
                }
            }
        } else {
            qCritical() << "UNKNOWN JSON FILE NAME" << fToWorkOn;
            res = false;
        }
        // m_worker->stopProgressLoop();
        // m_worker->setProgress(100);

        if (res == false) {
            break;
        }
    } // for (it = openLines.cbegin(); it != openLines.end(); ++it) {

    m_hw->dc_autoRequest(true);  // ALWAYS turn autoRequest ON
    qDebug() << "SET AUTO-REQUEST=TRUE";

    return res;
}