By default we do not update a repository if the desired refspec is
already checked out and so we do not pull any new commits that may have
been added to this refspec upstream. If the new `--update` argument is
passed on the command line then we instead pull in any new upstream
commits.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
When checking out a repository the default behaviour is to abort if
local changes are present. If the new `--force-checkout` argument is
passed on the command line then any local changes will instead be
discarded so that the desired refspec can be checked out.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This makes it much simpler to implement new command line arguments.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
By defining the plugin name and help message as attributes of the plugin
class we can move the argument parser creation up into the
kas_get_argparser() function. This will allow us to further reduce
duplication in following commits.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
If refspec is a branch name, ensure that the local branch name is always
set to the refspec. In the opposite case when refspec is a commit hash,
ensure that for git repositories we always end up in the 'detached HEAD'
state.
It's also cheaper and simpler to always run `git checkout` or `hg
checkout` than it is to test if a checkout is actually needed. If the
desired refspec is already checked out then these commands are no-ops.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Handle gracefully the case that a repo has no branch checked out after
cloning.
Reported-by: Claudius Heine <ch@denx.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This allows the `kas build` command to be used when you need to pass
extra arguments to bitbake.
A `--` separator is needed when passing arguments which begin with a
dash so that argparse doesn't try to parse them as kas further
arguments.
For example, to pass `--skip-setscene` to bitbake:
kas build config.yml -- --skip-setscene
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The return value of kas() is used as the argument to sys.exit() so it
should be 0 to report successful completion.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Bitbake provides a S3 fetcher (`lib/bb/fetch2/s3.py`), however the
`AWS_CONFIG_FILE` and `AWS_SHARED_CREDENTIALS_FILE` variables are not
transfered to the environment of the fetcher command (`aws` in this
case) in the `runfetchcmd` function (`lib/bb/fetch2/__init__.py`).
That means the location of these files need to be the default one, so
copying it in KAS to the new HOME directory is necessary.
This patch implements the copying of those files if the
`AWS_CONFIG_FILE` and `AWS_SHARED_CREDENTIALS_FILE` are set.
Per default there variables are not available in the bitbake
environment. To have them available there a `env` entry in the kas
configuration will be necessary.
Signed-off-by: Claudius Heine <ch@denx.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
We were always printing the ID of the last patch of a repo because the
application loop only iterated over a set of patch paths, not the patch
entries. Fix that be assembling a tuple of path and ID in my_patches.
Reported-by: Mustafa Yuecel <mustafa.yuecel@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
'qemu' is not a valid machine. So, let's use the default one defined in
poky -> 'qemux86-64' [1]
Fixes:
ERROR: OE-core's config sanity checker detected a potential misconfiguration.
Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
Following is the list of potential problems / advisories:
MACHINE=qemu is invalid. Please set a valid MACHINE in your local.conf, environment or other configuration file.
[1] - https://git.yoctoproject.org/cgit.cgi/poky/tree/meta-poky/conf/local.conf.sample#n37
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
In at least some versions of the 'ssh-add' command, adding a SSH key
requires that SSH key is newline terminated. If it is not, ssh-add
doesn't add the key and, instead, unhelpfully prompts for a
passphrase for the key ('Enter passphrase for (stdin):').
This change makes sure the key is terminated with a newline character to
hopefully avoid this issue occurring as often.
Signed-off-by: Sam Lewis <sam.vr.lewis@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Recent bitbake requires to declare multiconfig targets via "mc:".
Use that chance to refactor the function and match on the colon as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
If refspec is pointing to an upstream branch name, the checkout for a
second run will not reset a repo back to the upstream commit. That is
because we applied the repo patches to a local branch that carries the
name of the upstream one.
Fix that by switching to local branch prior to applying any patches.
Reported-by: Belisko Marek <marek.belisko@gmail.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
patch can not handle file mode headers and can therefore not be used to
create executable files. fixes 8a2a21d799
In addition commit every single patch and treat git patches as
potentially just diffs and not mails.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Adding --cmd to the task argument changed the name of the destination
variable, and that broke the whole subcommand because 'cmd' is already
used by the top-level parser. Fix this by setting dest explicitly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This aligns us with bitbake. Moreover, -c/--cmd is easier to tell apart
from --target. Keep --task for backward compatibility.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Switch to applying all patches with "patch" and later do a "<vcs> add;
<vcs> commit". Also iterate over quilt series files ourselfs and apply
the patches one by one.
This means we can apply patches on mercurial as well as on git.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The interface cmd prototypes got out of sync so mercurial stopped
working. Align with git again to fix that.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Currently the the remote URL is only set during the initial clone.
This might lead to confusion with the user as changing the URL in the kas.yml
does not get reflected and thus errors about references not found show up.
This change makes sure the URL is always set to the value specified in the
kas.yml file.
For mercurial this currently prints a warning as there is no command to change
the default path.
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
[Jan: fix up style, adjust comment on hg's set_remote_url_cmd]
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
There is no good reason to only warn about an incorrect patch entry or
a missing patch file. This just causes CI systems to succeed with a
build - or fail at unexpected places.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Analogously to bitbake's PREMIRRORS, this allows to define alternative
sources for repo URLs specified in kas files.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
PEP8:
"""
To better support introspection, modules should explicitly declare the
names in their public API using the __all__ attribute.
"""
flake8 reports
./kas/kas.py:51:1: F401 '.build' imported but unused
./kas/kas.py:52:1: F401 '.shell' imported but unused
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
PEP8:
"""
To better support introspection, modules should explicitly declare the
names in their public API using the __all__ attribute.
"""
reported by flake8:
./kas/__init__.py:26:1: F401 '.__version__.__version__' imported but unused
./kas/__init__.py:27:1: F401 '.__version__.__file_version__' imported but unused
./kas/__init__.py:27:1: F401 '.__version__.__compatible_file_version__' imported but unused
./kas/__init__.py:28:1: F401 '.configschema.CONFIGSCHEMA' imported but unused
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
pylint has been a great tool to get the initial code base into shape
but since then we mostely false postives. All those warnings needed to
be annonated.
This allong wouldn't be reason enough to remove it. The main problem
is that the pylint version on gitlab is updated in the back and
suddenly we get new warnings which are bogus.
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
They were ignored so far is the config file was specifying a target or a
task, respectively. But the proper priority is (in descending order):
1. command line options
2. environment (KAS_TARGET, KAS_TASK)
3. kas config
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
In 3.7, async became a reserved word. So we can no longer use it
directly for pre-3.5 compatibility.
At this chance, extract the common compat part into a helper function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This allow to use the host-side SSH agent when cloning protected
repositories via kas. We already do this for the build environment.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Divide the SetupRepos command into three parts: init, step and finish
Build a macro-based loop with the step part of the function.
Rewrite this in build.py and shell.py
Signed-off-by: Andreas Reichel <andreas.reichel.ext@siemens.com>
