They were ignored so far is the config file was specifying a target or a
task, respectively. But the proper priority is (in descending order):
1. command line options
2. environment (KAS_TARGET, KAS_TASK)
3. kas config
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This extends the command line syntax for specifying configuration files.
You can now combine files by concatenating them, separated by colons:
kas build base.yml:board.yml:feature.yml
The motivation for this feature is to avoid having to write tons of
configuration files that perform this combinations statically via
includes.
In order to avoid complications and prevent that users shoot themselves
too easily into their feet, we deny the case of distributing the
configuration files over multiple repositories. Either all files
specified on the command line come from the same repo, or they are all
local (without versioning control).
Based on idea by Claudius Heine.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Rather than handing down a complete config, only pass what is really
needed: a repository fallback path. This can already be determined by
the caller.
Inside Repo.factory(), we can retrieve the global context now and can
stop relying on a reference stored in the config.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
If a kas-file inside a repo includes another kas-file form a repo
which is not checked-out, and this 2nd repo can only be checked-out
with an SSH-key, kas fails. This is, because the constructor of
the Config class used to fetch missing repos already before the
SSH-Agent was setup.
This patch refactors the way in which kas checks-out repositories. This
also required the Config class to be split into Context and Config,
where the new Context is the build-Context, i.e. containing the
environment of commands executed by kas and the new Config is the Config
of kas itself, i.e. containing the repo dictionary.
This way it is possible to initialize the context needed for SSH setup
independently of the kas configuration.
The commands ReposFetch and ReposCheckout are refactored into a
SetupRepos command. This command parses the include files and
successively checks-out needed repos and updates the config as long
as repos are missing. The logic is taken directly from the constructor
of the former Config class (with minor adaptations).
Further refactoring will be needed to clean up the conceptual
programming patterns (i.e. to keep the Macro-Style consistent),
and to re-add the macro pattern regarding the above ReposFetch.
Signed-off-by: Andreas Reichel <andreas.reichel.ext@siemens.com>
Since 'get_repo_dict' does much more than just querying available
repositories, this patch makes it private. The same data is now
available via the 'repo_dict' property. This also means that
'get_repos' is now faster, because it accesses cached data, instead of
calling 'get_repo_dict' that generates this data.
This patch also allows 'get_repos' and 'repo_dict' to be used even in the
'Repo' class. 'get_repo_dict' creates new 'Repo' instances and thus
invalidates the current instance.
This patch is in preparation of the 'patch support'-feature, that
depends on this patch.
Signed-off-by: Claudius Heine <ch@denx.de>
This reverts commit b9032ec025.
The commit breaks inclusion chains of kas files. In my example a
first kas-file includes a second one. The second one is supposed to
add repos but kas does not fetch those.
Reported-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Since 'get_repo_dict' does much more than just querying available
repositories, this patch makes it private. The same data is now
available via the 'repo_dict' property. This also means that
'get_repos' is now faster, because it accesses cached data, instead of
calling 'get_repo_dict' that generates this data.
Signed-off-by: Claudius Heine <ch@denx.de>
This will be used to carry the type of repo we are talking about. At the
moment it defaults to "git".
Signed-off-by: Henning Schild <henning.schild@siemens.com>
The user just calls that factory and gets something that is a Repo, in
fact just a GitRepo for now.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
With this its possible to create custom environment variables within the kas
configuration file, that are passed through to the build environment:
env:
VARIABLE_NAME: "default variable value"
Those variables can be overwritten by variables of the environment kas is
started in:
$ VARIABLE_NAME="overwritten variable value" kas shell ...
Those variables are also added to the 'BB_ENV_EXTRAWHITE' variable list to make
them available to bitbake.
This is useful for instance storing sensitive information, that should not be
part of the configuration files or bitbake recipes.
Signed-off-by: Claudius Heine <ch@denx.de>
This patch adds multiconfig support to kas by defining the
"BBMULTICONFIG" variable in the "local.conf" file.
Signed-off-by: Claudius Heine <ch@denx.de>
Its useful to know the missing repos that are required to
create the full configuration as they are detected.
This might help to find problems within the configuration and kas code
in the future.
Signed-off-by: Claudius Heine <ch@denx.de>
Some bitbake recipes use FTP to fetch objects. This patch adds support
for the ftp_proxy variable to kas. Is now usable in the same manner as
the 'http_proxy' variable
Signed-off-by: Claudius Heine <ch@denx.de>
With this patch support for building multiple targets in parallel with
bitbake is now supported.
Changes:
- Its now possible to state a list of targets under the target key in
the configuration file.
Example:
target:
- product-image
- product-update-image
- Its now possible to define multiple targets in the kas command line.
Example:
$ kas build --target product-image --target product-update-image \
kas.yml
- Its now possible to define multiple targets via the environment:
Example:
$ export KAS_TARGET="product-image product-update-image"
$ kas build kas.yml
Signed-off-by: Claudius Heine <ch@denx.de>
It might be useful to see the merged configuration in case of debugging.
This patch adds it to the debug output log level.
Signed-off-by: Claudius Heine <ch@denx.de>
9e136e532d ("config: Remove dynamic configuration variant")
removed the posibility to add pre and post hooks. Remove the remaining
bits from libcmds.
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Now that we no longer have two different configuration variants, we can
remove the abstract class and make Config the primary interface.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
We no longer see an urging use case for it. All field scenarios can
perfectly be modeled with the static format.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Using absolute paths breaks on systems that place the binaries in
another directory and it defeats local overlays with PATH.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Instead of flooding the log with misleading error messages, always print
a note which path is used as root for repositories that have no URLs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
If the repo, where the configuration file resides in (in-tree
configuration) is not a git repository, take the directory where the
configuration file is located at as the path of this repo instead of failing.
This patch does not need to raise the configuration file version,
because it does not depend on the configuration file.
Signed-off-by: Claudius Heine <ch@denx.de>
Sort the header sections by their keys and the layers by their names.
This will re-enable writing deterministic config files, and bitbake can
use its cache again, accelerating rebuild startup times a lot.
While at it, indent the layers in bblayers.conf nicely.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
When a configuration file depends on a include from a repo, which is
defined in another included file, a 'KeyError' occures.
This fixes this, so that only known repos are tried to be fetched.
Signed-off-by: Claudius Heine <ch@denx.de>
ConfigStatic does not respect the --target overwrite so far. Fix this
by pulling the default definition into ConfigPython (ConfigStatic
already does that via the Config base class) and set the target provided
via the command line in the static config after parsing all files.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The `load_config` function in the includehandler already checks for the
file extension, so checking it before that, is redundant.
Signed-off-by: Claudius Heine <ch@denx.de>
In case of ConfigStatic, proxy settings only come from the host
environment. We need them early, prior to fetching the first missing
repo that is pulled via an include.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
For me 'distro.id()' returned 'ubuntu' and thats not equal to 'Ubuntu'.
This patch converts the distro id to lowercase before comparing it.
Signed-off-by: Claudius Heine <ch@denx.de>
Make the header sections in local.conf and bblayers.conf easier
identifiable by naming them and writing them in chunks, separated by
blank lines. This can help with debugging the resulting configuration.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
When updating the previously used version of pylint 1.6.5 to 1.7.2
some new issues where found.
This patch fixes these issues:
************* Module kas.config
E:402, 0: Bad option value 'redefined-variable-type' (bad-option-value)
************* Module kas.includehandler
E: 33, 0: No name 'version' in module 'distutils' (no-name-in-module)
E: 33, 0: Unable to import 'distutils.version' (import-error)
R:239,12: Unnecessary "else" after "return" (no-else-return)
************* Module kas.libkas
C:214, 7: Do not use `len(SEQUENCE)` as condition value
(len-as-condition)
************* Module kas.repos
R: 54,12: Unnecessary "else" after "return" (no-else-return)
Signed-off-by: Claudius Heine <ch@denx.de>
Changing even simple settings like target or machine requires the
creation of additional configuration files. This does not scale well.
This patch allows the target, machine and distro to be overwritten by
environment variables (called KAS_TARGET, KAS_MACHINE and KAS_DISTRO
respectively).
It also fixes how the environment variables for the proxy settings are
handled. Currently the settings in the config files overwrite the proxy
settings from the environment, but since that would be inconsistent this
patch switches that around. With this patch the environment overwrites
the proxy settings in the configuration file.
Signed-off-by: Claudius Heine <ch@denx.de>
Building on top of run_cmd_async, this reworks repo_fetch to a
repository list fetcher repos_fetch that runs those operations in
parallel.
The two users, ReposFetch and ConfigStatic, are converted to exploit
this parallelization.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Make it more straightforward by removing complete variable and
terminating the loop on the condition - no more missing repos -
directly. Rename variables to clarify what they reference.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The current implementation did some more hackish solution to work
around some of kas infrastructure, without changing to much.
This patch cleans this up and therefor remove the more obsure part
of the include mechansim.
Signed-off-by: Claudius Heine <ch@denx.de>
Splitting configuration files into multiple files and implementing an
include mechanism allows to handle configurations more flexible and
allowing following scenarios:
- including kas configuration file from external meta layer into
own project
- splitting many different similar configurations into multiple files
with only a couple of common files
To include file its necessary to add a 'includes' entry into the kas
configuration. To include files from the same repo, do it like this:
-----
includes:
- ../base/base_include.yml
-----
The path is relative to the current configuration file. If they start
with a path seperator ("/") they are absolute.
To include files from a different repository, do it like this:
-----
includes:
- file: bsps/my_machine_include.yml
repo: collected_machines
repos:
collected_machines:
url: https://url.to.git.repo/
revspec: master
-----
You have to make sure that the repository definition is available
in your current file, or in any include that is available at this
point.
Yaml ("*.yml") and Json ("*.json") files are supported.
Included in this patch are also some changes to the configuration
file structure. Here is an overview:
The value of the 'repos' key is a dictionary that maps a repo identifier
to a dictionary that contains 5 entries:
- url: The url to the repository. If that is missing, no git operations
are used
- refspec: The git refspec of the repository that is used. If that is
missing the latest commit of the default branch is used.
- name: The is defines under which name the repository is stored. If
that is missing the repository identifier is used
- path: The path where the repository is stored. If no url is given and
a path is missing, the repository is referencing the repository under
which the configuration file is stored. If no url is given and a path is
specified, the repository is referencing a directory where layers might
be stored. If an url is specified, path can be used to overwrite the
default (kas_work_dir + repo.name) checkout directory.
- layers: This contains a dictionary of layers, that should be included
into the bblayers.conf. The keys are paths relative to the repository
and the values can be used to exclude layers if they are one of
"excluded", "disabled", "false", "0", "n", or "no". Also boolean values
are accepted. Any other value, including "None" means that this layer is
included into the bblayers.conf. If "layers" is missing or empty, the
repository itself is included into the bblayers. If this is specified, the
repository itself is not included into the bblayers.conf.
Signed-off-by: Claudius Heine <ch@denx.de>
It was decided that 'sublayers' is to confusing, because this term is
not used in the bitbake/openembedded context.
Signed-off-by: Claudius Heine <ch@denx.de>
