Currently many of the error messages regarding the configuration file
are not really helpful.
To improve reporting this patch adds validation of the configuration
files using the jsonschema module.
Example:
Forgetting ':' at the end of a layer definition, like this:
repos:
meta-iot2000:
layers:
meta-iot2000-example
^
Exception before:
TypeError: string indices must be integers
Exception after:
Validation Error:
'meta-iot2000-example' is not of type 'object'
Failed validating 'type' in schema['properties']['repos']['additionalProperties']['properties']['layers']:
{'additionalProperties': {'oneOf': [{'type': 'null'},
{'type': 'integer'},
{'type': 'boolean'},
{'type': 'string'}]},
'type': 'object'}
On instance['repos']['meta-iot2000']['layers']:
'meta-iot2000-example'
This patch adds 'jsonschema' as an additional dependency.
Signed-off-by: Claudius Heine <ch@denx.de>
With this patch support for building multiple targets in parallel with
bitbake is now supported.
Changes:
- Its now possible to state a list of targets under the target key in
the configuration file.
Example:
target:
- product-image
- product-update-image
- Its now possible to define multiple targets in the kas command line.
Example:
$ kas build --target product-image --target product-update-image \
kas.yml
- Its now possible to define multiple targets via the environment:
Example:
$ export KAS_TARGET="product-image product-update-image"
$ kas build kas.yml
Signed-off-by: Claudius Heine <ch@denx.de>
It might be useful to see the merged configuration in case of debugging.
This patch adds it to the debug output log level.
Signed-off-by: Claudius Heine <ch@denx.de>
Captain Hindsight: We should have never committed 13a87cb8c7 ("Allow
to define task in config and environment") without forwarding the file
version. Without this, no config file writer can tell kas versions
apart that support task control from those that don't.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
9e136e532d ("config: Remove dynamic configuration variant")
removed the posibility to add pre and post hooks. Remove the remaining
bits from libcmds.
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Now that we no longer have two different configuration variants, we can
remove the abstract class and make Config the primary interface.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
We no longer see an urging use case for it. All field scenarios can
perfectly be modeled with the static format.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Using absolute paths breaks on systems that place the binaries in
another directory and it defeats local overlays with PATH.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Additionally requires to run the container with --privileged - not nice but
unavoidable right now, see also
https://groups.google.com/forum/#!topic/isar-users/Un75m49InjY
Also note that running containers with different binfmt settings
concurrently will cause troubles. Same for the case that the host
requires deviating settings. Use carefully.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This patch adds a command line argument to the shell plugin, that allows to
enter the shell without changing the bitbake configuration.
Signed-off-by: Claudius Heine <ch@denx.de>
Before this patch, starting the shell in a clean environment, does not
checkout all repository or configures all layers correctly.
This patch adds the missing checkout and configuration steps to the
shell plugin.
Signed-off-by: Claudius Heine <ch@denx.de>
Having more than one them is a sign of serious problems in the
configuration. Better catch that early and fail loudly.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Do not swallow errors of the init script. Rather leave our wrapper
immediately and let run_cmd report the splash and terminate kas.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
When we run as root on the host and want to allow the builder to do the
same, e.g. to access root-owned volumes, accept USER_ID=0 to express
this.
This allows to tell the user to call "docker run -e USER_ID=$(id -u)",
and it will always reflect the calling context's permissions into the
container.
Reported-by: Jan Christian Grünhage <jan.christian@gruenhage.xyz>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Instead of flooding the log with misleading error messages, always print
a note which path is used as root for repositories that have no URLs.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
If the repo, where the configuration file resides in (in-tree
configuration) is not a git repository, take the directory where the
configuration file is located at as the path of this repo instead of failing.
This patch does not need to raise the configuration file version,
because it does not depend on the configuration file.
Signed-off-by: Claudius Heine <ch@denx.de>
Some versions/configurations of pip do not seem to pick up the proxy
settings from the environment. Help out via the command line. It's a nop
when https_proxy is unset.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Useful to bypass nasty firewalls via http proxies while pulling from
git repos using the native protocol. In order to use oe-git-proxy,
define or clear NO_PROXY according to local needs in the CI script or
via --env on docker run.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This allows to define GIT_PROXY_COMMAND="oe-git-proxy" outside of kas
and pass this to the build. Now we can pull from native git repos when
there is only a http proxy available.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Sort the header sections by their keys and the layers by their names.
This will re-enable writing deterministic config files, and bitbake can
use its cache again, accelerating rebuild startup times a lot.
While at it, indent the layers in bblayers.conf nicely.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Use a separately incremented integer to track the configuration file
format version. We start with 2 due to the change that 23c3a951f6
introduced. 1 is declared to be equivalent to the original '0.10'.
The separate versioning has the advantage of being able to increment it
already during the development cycle, and using it with config files
that test/exploit the new format.
Using an integer has the advantages of a) differentiating it clearly
from the now independent kas version and b) simplifying the version
parsing. We can now also remove the string type restriction.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Sphinx complained:
docs/userguide.rst:66: ERROR: Malformed table.
Column span alignment problem in table line 8.
Avoid this by reformatting to a grid table, also adjusting the content a
bit.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
When a configuration file depends on a include from a repo, which is
defined in another included file, a 'KeyError' occures.
This fixes this, so that only known repos are tried to be fetched.
Signed-off-by: Claudius Heine <ch@denx.de>
This exception is always thrown with both a message and a file name.
Combine them to a single string, instead of throwing tuples.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
This prevents overwriting next builds with master output, and vice
versa. Users can now decide if they want more or less bleeding edge.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Yeah, that was "too simple to possibly fail". Consequently, the release
revealed two issues: The script only looked for annotated tags but they
are not used so far. Moreover, the TRAVIS_BRANCH name of a tag is that
tag and neither "master" or "next".
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
ConfigStatic does not respect the --target overwrite so far. Fix this
by pulling the default definition into ConfigPython (ConfigStatic
already does that via the Config base class) and set the target provided
via the command line in the static config after parsing all files.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
There is a nasty problem with legacy aufs: wic tries to find out the
block size of the filesystem that holds the partition images, but aufs
does not seem to implement this properly, returning 0 at least on Debian
Jessie. That makes wic become upset and through a division-by-zero
exception soon after.
Catch this case by warning the user about the inappropriate docker
setup during container start.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
As suggested by Claudius Heine, reorder the blocks so that we can add
the pylint exception to the if half.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
The `load_config` function in the includehandler already checks for the
file extension, so checking it before that, is redundant.
Signed-off-by: Claudius Heine <ch@denx.de>
The application should not be stopped from this code, removed `sys.exit`
and added exceptions to improve error handling.
Also added some more checks that were missing.
Signed-off-by: Claudius Heine <ch@denx.de>
