Remove unused download_tread and report_thread

... was: 20ms x  50 = 1000ms = 1s
    new: 20ms x 250 = 5000ms = 5s

DCLibraries.pri

@@ -90,9 +90,7 @@ HEADERS += \
     $${PWD}/include/sendWRcmd.h \
     $${PWD}/include/storeINdata.h \
     $${PWD}/include/tslib.h \
-    $${PWD}/include/shared_mem_buffer.h \
+    $${PWD}/include/shared_mem_buffer.h
-    $${PWD}/include/reporting_thread.h \
-    $${PWD}/include/download_thread.h
 
 SOURCES += \
     $${PWD}/src/datei.cpp \
@@ -103,9 +101,7 @@ SOURCES += \
     $${PWD}/src/sendWRcmd.cpp \
     $${PWD}/src/storeINdata.cpp \
     $${PWD}/src/tslib.cpp \
-    $${PWD}/src/shared_mem_buffer.cpp \
+    $${PWD}/src/shared_mem_buffer.cpp
-    $${PWD}/src/reporting_thread.cpp \
-    $${PWD}/src/download_thread.cpp
 
 
 # INTERFACE = DeviceController

dCArun/CArun.cpp

@@ -1,7 +1,7 @@
 #include "CArun.h"
 #include "datei.h"
 
-#include "CCWakelineAbstraction.h"
+#include "DigitalOutputAbstraction.h"
 
 
 CArun::CArun(QObject *parent)
@@ -20,7 +20,11 @@ CArun::CArun(QObject *parent)
 
     this->timerChainCtrl->start();
 
-    this->ccWakelineAbstraction = new CCWakelineAbstraction(this->HWaccess, this);
+
+    this->digitalOutputAbstraction = new DigitalOutputAbstraction(this->HWaccess, this);
+    this->digitalOutputAbstraction->addCCWake("/sys/class/leds/wakeupctrl_cc/brightness");
+    this->digitalOutputAbstraction->addCCPower("/run/powerctrl_cc");
+    this->digitalOutputAbstraction->addCCModem("/run/powerctrl_modem");
 }
 
 

dCArun/CArun.h

@@ -22,7 +22,7 @@ enum class SETUP_STEP {
 };
 
 
-class CCWakelineAbstraction;
+class DigitalOutputAbstraction;
 
 class CArun : public QObject
 {
@@ -45,7 +45,7 @@ private:
 
     void openSerialPort();
 
-    CCWakelineAbstraction* ccWakelineAbstraction;
+    DigitalOutputAbstraction* digitalOutputAbstraction;
 
 signals:
 

dCArun/CCWakelineAbstraction.cpp

@@ -1,51 +0,0 @@
-#include <QFileSystemWatcher>
-#include <QFile>
-
-#include <QDebug>
-
-#include "CCWakelineAbstraction.h"
-#include "plugin.h"
-
-/**
- * this is based on a solution from:
- * https://embeddeduse.com/2018/09/18/monitoring-sys-files-qfilesystemwatcher/
- *
- */
-
-CCWakelineAbstraction::CCWakelineAbstraction(hwinf *dc, QObject *parent)
-    : QObject(parent)
-    , dc(dc)
-{
-    auto ccWakeMonitor = new QFileSystemWatcher(this);
-
-    ccWakeMonitor->addPath("/sys/class/leds/wakeupctrl_cc/brightness");
-    connect(ccWakeMonitor, &QFileSystemWatcher::fileChanged,
-                this, &CCWakelineAbstraction::ccWakeChanged);
-
-    qCritical() << "... init CCWakelineAbstraction";
-}
-
-
-void CCWakelineAbstraction::ccWakeChanged(const QString &path)
-{
-    QFile ccWakeFile(path);
-     if (!ccWakeFile.open(QIODevice::ReadOnly)) {
-         qWarning() << "ERROR: Could not open ccWakeFile file.";
-         return;
-     }
-     auto ccWake = ccWakeFile.readAll();
-     if (!ccWake.isEmpty()) {
-         int state = ccWake.at(0);
-         //qCritical() << "INFO: ccWake = " << state;
-         switch (state) {
-         case 0x30:  // '1'
-             qCritical() << "INFO: ccWake -> sleep";
-             this->dc->credit_switchWake(true); // switch 'sleep'
-             break;
-         case 0x31:  // '0'
-             qCritical() << "INFO: ccWake -> wake";
-             this->dc->credit_switchWake(false); // switch 'wake'
-             break;
-         }
-     }
-}

dCArun/CCWakelineAbstraction.h

@@ -1,25 +0,0 @@
-#ifndef CCWAKELINEABSTRACTION_H
-#define CCWAKELINEABSTRACTION_H
-
-
-#include <QObject>
-
-class hwinf;
-class QFileSystemWatcher;
-
-
-class CCWakelineAbstraction : public QObject
-{
-    Q_OBJECT
-
-public:
-    CCWakelineAbstraction(hwinf *dc, QObject *parent = nullptr);
-
-private:
-    hwinf *dc;
-    QFileSystemWatcher *ccWakeMonitor;
-
-    void ccWakeChanged(const QString &path);
-};
-
-#endif // CCWAKELINEABSTRACTION_H

dCArun/DigitalOutputAbstraction.cpp

@@ -0,0 +1,170 @@
+#include <QFileSystemWatcher>
+#include <QFile>
+#include <QFileInfo>
+#include <QTimer>
+
+#include <QDebug>
+
+#include "DigitalOutputAbstraction.h"
+#include "plugin.h"
+
+/**
+ * this is based on a solution from:
+ * https://embeddeduse.com/2018/09/18/monitoring-sys-files-qfilesystemwatcher/
+ *
+ */
+
+DigitalOutputAbstraction::DigitalOutputAbstraction(hwinf *dc, QObject *parent)
+    : QObject(parent)
+    , dc(dc)
+{
+    this->fileMonitor = new QFileSystemWatcher(this);
+
+    connect(this->fileMonitor, &QFileSystemWatcher::fileChanged,
+                this, &DigitalOutputAbstraction::fileChanged);
+
+    qCritical() << "... init DigitalOutputAbstraction";
+}
+
+
+
+
+bool DigitalOutputAbstraction::addCCWake(const QString file)
+{
+    // on PTU5: "/sys/class/leds/wakeupctrl_cc/brightness"
+    if (!QFileInfo::exists(file)) {
+        qCritical() << "   ... create file: " << file;
+        QFile(file).open(QIODevice::ReadWrite | QIODevice::Text);
+    }
+
+    qCritical() << "   ... add file: " << file;
+
+    this->ccWakePath = file;
+    return this->fileMonitor->addPath(file);
+}
+
+bool DigitalOutputAbstraction::addCCPower(const QString file)
+{
+    if (!QFileInfo::exists(file)) {
+        qCritical() << "   ... create file: " << file;
+        QFile(file).open(QIODevice::ReadWrite | QIODevice::Text);
+    }
+
+    qCritical() << "   ... add file: " << file;
+
+    this->ccPowerPath = file;
+    return this->fileMonitor->addPath(file);
+}
+
+bool DigitalOutputAbstraction::addCCModem(const QString file)
+{
+    if (!QFileInfo::exists(file)) {
+        qCritical() << "   ... create file: " << file;
+        QFile(file).open(QIODevice::ReadWrite | QIODevice::Text);
+    }
+
+    qCritical() << "   ... add file: " << file;
+
+    this->modemPowerPath = file;
+    return this->fileMonitor->addPath(file);
+}
+
+
+void DigitalOutputAbstraction::fileChanged(const QString &path)
+{
+    if (path == this->ccPowerPath)    this->private_ccPowerChanged();
+    if (path == this->ccWakePath)     this->private_ccWakeChanged();
+    if (path == this->modemPowerPath) this->private_modemPowerChanged();
+}
+
+void DigitalOutputAbstraction::private_modemPowerChanged()
+{
+    QFile modemPowerFile(this->modemPowerPath);
+    if (!modemPowerFile.open(QIODevice::ReadOnly)) {
+        qWarning() << "ERROR: Could not open modemPowerFile " << this->modemPowerPath;
+        return;
+    }
+    auto modemPower = modemPowerFile.readAll();
+    if (!modemPower.isEmpty()) {
+        int state = modemPower.at(0);
+        // qCritical() << "INFO: modemPower = " << state;
+        switch (state) {
+        case 0x30:  // '0'
+            qCritical() << "INFO: modemPower -> off";
+            this->dc->mod_switchWake(false);
+            this->dc->mod_switchPower(false);
+            break;
+        case 0x31:  // '1'
+            qCritical() << "INFO: modemPower -> on";
+            this->dc->mod_switchWake(true);
+            this->dc->mod_switchPower(true);
+            break;
+        }
+    }
+}
+
+void DigitalOutputAbstraction::private_ccPowerChanged()
+{
+    QFile ccPowerFile(this->ccPowerPath);
+    if (!ccPowerFile.open(QIODevice::ReadOnly)) {
+        qWarning() << "ERROR: Could not open ccPowerFile file.";
+        return;
+    }
+    auto ccPower = ccPowerFile.readAll();
+    if (!ccPower.isEmpty()) {
+        int state = ccPower.at(0);
+
+        auto lambdaOn = [this]() -> void
+        {
+            this->dc->credit_switchPower(true);
+            this->dc->credit_switchWake(true);
+        };
+        auto lambdaOff = [this]() -> void
+        {
+            this->dc->credit_switchPower(false);
+            this->dc->credit_switchWake(false);
+        };
+
+
+        //qCritical() << "INFO: ccPower = " << state;
+        switch (state) {
+        case 0x30:  // '0'
+            qCritical() << "INFO: ccPower -> off";
+            lambdaOff();
+            break;
+        case 0x31:  // '1'
+            qCritical() << "INFO: ccPower -> on";
+            lambdaOn();
+            break;
+        case 0x32:  // '2'
+            qCritical() << "INFO: ccPower -> on / off";
+            lambdaOff();
+            QTimer::singleShot(500, this, lambdaOn);
+            break;
+        }
+    }
+}
+
+void DigitalOutputAbstraction::private_ccWakeChanged()
+{
+    QFile ccWakeFile(this->ccWakePath);
+    if (!ccWakeFile.open(QIODevice::ReadOnly)) {
+        qWarning() << "ERROR: Could not open ccWakeFile " << this->ccWakePath;
+        return;
+    }
+    auto ccWake = ccWakeFile.readAll();
+    if (!ccWake.isEmpty()) {
+        int state = ccWake.at(0);
+        //qCritical() << "INFO: ccWake = " << state;
+        switch (state) {
+        case 0x30:  // '0'
+            qCritical() << "INFO: ccWake -> sleep";
+            this->dc->credit_switchWake(true); // switch 'sleep'
+            break;
+        case 0x31:  // '1'
+            qCritical() << "INFO: ccWake -> wake";
+            this->dc->credit_switchWake(false); // switch 'wake'
+            break;
+        }
+    }
+}

dCArun/DigitalOutputAbstraction.h

@@ -0,0 +1,37 @@
+#ifndef DIGITALOUTPUTABSTRACTION_H
+#define DIGITALOUTPUTABSTRACTION_H
+
+
+#include <QObject>
+
+class hwinf;
+class QFileSystemWatcher;
+
+
+class DigitalOutputAbstraction : public QObject
+{
+    Q_OBJECT
+
+public:
+    DigitalOutputAbstraction(hwinf *dc, QObject *parent = nullptr);
+    bool addCCWake(const QString file);
+    bool addCCPower(const QString file);
+    bool addCCModem(const QString file);
+
+
+private:
+    hwinf *dc;
+    QFileSystemWatcher *fileMonitor;
+
+    QString modemPowerPath;
+    QString ccPowerPath;
+    QString ccWakePath;
+
+    void fileChanged(const QString &path);
+
+    void private_modemPowerChanged();
+    void private_ccPowerChanged();
+    void private_ccWakeChanged();
+};
+
+#endif // DIGITALOUTPUTABSTRACTION_H

dCArun/dCArun.pro

@@ -40,14 +40,14 @@ DEFINES+=APP_EXTENDED_VERSION=\\\"$$EXTENDED_VERSION\\\"
 
 SOURCES += \
     CArun.cpp \
-    CCWakelineAbstraction.cpp \
+    DigitalOutputAbstraction.cpp \
     main.cpp \
     tslib.cpp \
     datei.cpp
 
 HEADERS += \
     CArun.h \
-    CCWakelineAbstraction.h \
+    DigitalOutputAbstraction.h \
     guidefs.h \
     tslib.h \
     versionHistory.txt \

include/com.h

@@ -7,6 +7,7 @@
 //#include <QString>
 #include <QTimer>
 #include <QSerialPort>
+#include <QVector>
 #include "tslib.h"
 #include "controlBus.h"
 #include "interfaces.h"
@@ -32,6 +33,8 @@ class T_com : public QObject        //,  public QPlainTextEdit
 //    QSerialPort *CatSerial = nullptr;
     QSerialPort *CatSerial;
 
+    uint32_t writeCount = 0;
+
     //char oeffneSerialPort();
     char open_Serial_Port();
     void closeSerialPort();
@@ -61,6 +64,7 @@ public:
     bool readFromSerial(QByteArray &data, uint16_t &sendLength);
         // retval: true: data available
 
+    void flushPort(void);
 /*
     uint8_t getAllPortPins(void);
         // rs232pins: all signals bitwise coded in one byte:

include/datIf.h

@@ -168,6 +168,9 @@ class T_datif : public QObject
     QTimer *datif_trigger;
     uint8_t selectedSlaveAddr;
 
+    bool waitForTestResponse = false;
+    uint32_t readCount = 0;
+
 private slots:
     char datif_cycleSend();
     void StoredRecData();

include/dcBL.h

@@ -69,6 +69,8 @@ bool dcBL_sendOneBlockCpl(uint16_t blockNumber);
 
 int8_t dcBL_getBlockResult(void);
 
+void dcBL_cancelSending(void);
+
 char dcBL_cycle(void);
     // to be called cyclic every 100ms
 

include/download_thread.h

@@ -1,37 +0,0 @@
-#ifndef DOWNLOAD_THREAD_H_INCLUDED
-#define DOWNLOAD_THREAD_H_INCLUDED
-
-#include <QThread>
-#include <QString>
-#include <QByteArray>
-
-class hwinf;
-class DownloadThread : public QThread {
-    Q_OBJECT
-
-public:
-    enum class DownloadResult {OK, ERROR, TIMEOUT, NOP};
-
-    DownloadThread(hwinf *hw);
-    ~DownloadThread();
-
-protected:
-    // download thread does not have a running event queue, and therefore
-    // no slots. signals work the usual way.
-    void run() override;
-
-private:
-    DownloadResult sendStatus(int ret) const;
-    DownloadResult sendNextAddress(int bNum) const;
-    DownloadResult sendNextDataBlock(QByteArray const &binary, int bNum) const;
-    bool startBootloader() const;
-    bool stopBootloader() const;
-    QByteArray loadBinaryDCFile(QString dcFileName) const;
-    bool resetDeviceController() const;
-    DownloadResult dcDownloadBinary(QByteArray const &b) const;
-
-    hwinf *m_hw;
-    QString m_fileToDownload;
-};
-
-#endif // DOWNLOAD_THREAD_H_INCLUDED

include/hwapi.h

@@ -41,6 +41,8 @@ V4.0  6.9.2023: activating DC-Bootloader in slve-lib (SM)
         several new functions for "direct ticket print", without the dueway loading jsons to DC and cmd DC to print
         The same rules as before apply to the json, but it can have any arbitrary length
 
+8.10.2024 extension in dc_autoRequest()
+
 */
 
 
@@ -1352,16 +1354,6 @@ public:
     bool dcDownloadReportRunning() const override;
     bool dcDownloadReportFinished() override;
 
-    bool dcDownloadThreadStart() override;
-    bool dcDownloadThreadRunning() const override;
-    void dcDownloadThreadFinalize(DownloadThread *) override;
-    bool dcDownloadThreadFinished() const override;
-    bool dcDownloadReportThreadStart() override;
-    bool dcDownloadReportThreadRunning() const override;
-    void dcDownloadReportThreadFinalize() override;
-    void dcDownloadReportThreadQuit() override;
-    bool dcDownloadReportThreadFinished() const override;
-
     QString dcDownloadFileName() const override;
     bool dcDownloadSetRequested(bool) override;
     bool dcDownloadSetRunning(bool) override;

include/prot.h

@@ -122,6 +122,11 @@ public:
                            uint8_t  *RdDlen, uint8_t *receivedData);
         // retval: data valid, only one time true
 
+    void flushPort(void);
+    
+    uint16_t getReadSource() { return readSource; } // readSource contains last command sent to device controller
+    T_com *getSerialPort() { return mySerialPort; } // utility function
+
 
 signals:
     void framerecieved();   //bool gotINdata);

include/reporting_thread.h

@@ -1,25 +0,0 @@
-#ifndef REPORTING_THREAD_H_INCLUDED
-#define REPORTING_THREAD_H_INCLUDED
-
-#include <QThread>
-#include <QString>
-
-class hwapi;
-class ReportingThread : public QThread {
-    Q_OBJECT
-
-public:
-    ReportingThread(hwapi *hw);
-    ~ReportingThread();
-
-protected:
-    // reporting thread does not have a running event queue, and therefore
-    // no slots. signals work the usual way.
-    void run() override;
-
-private:
-    hwapi *m_hw;
-    QString m_fileToDownload;
-};
-
-#endif // REPORTING_THREAD_H_INCLUDED

include/runProc.h

@@ -52,6 +52,7 @@ class T_runProc : public QObject
 private slots:
     void runProc_slotProcess(void);
     bool bl_performComplStart(void);
+    bool bl_waitForRdyMsg(void);
 
 public:
     T_runProc();
@@ -70,9 +71,11 @@ public:
     void bl_rebootDC(void);
     void bl_startBL(void);
     void bl_checkBL(void);
-    bool bl_isUp(void);
+    //uint8_t bl_isUp(void);  neuere Sax-Version, bisher nicht verwendet
-
+        // return 1: BL is up   2: BL error  0: stopped
-    // new from 21.5.24 ..................................................................
+    bool bl_isUp(void);	    
+        
+    void resetBLvari(void);
 
     uint16_t sys_getCustomerNumber(void);
     uint16_t sys_getMachineNumber(void);

include/shared_mem_buffer.h

@@ -241,6 +241,8 @@ struct SharedMem
     bool    Sdata_coinPaymentNow;
     bool    Sdata_bootloadingNow;
 
+    bool    Sdata_ptuInSleep;
+    bool    Sdata_dcInSleep;
 
     // ------------------ Data OUTPUT --------------------------------
 

include/tslib.h

@@ -115,6 +115,10 @@ long tslib_atol( char *AscString);
     // AscString must be 0-terminated!
     // a leading '-' is ignored, a'.' or a ',' stops calculation
 
+void swl_returnWeekdayStr(char dow, char language, char *buf);
+    // dow=1...7
+    // always returns 10byte
+    // languages: 1=german  2=english
 
 
 

src/com.cpp

@@ -1,5 +1,6 @@
 #include "com.h"
 #include <QDebug>
+#include <QDateTime>
 //#include "controlBus.h"
 
 //////////////////////////////////////////////////////////////////////////////////
@@ -20,13 +21,48 @@ void T_com::writeToSerial(const QByteArray &data, uint16_t sendLength)
 {
     sendBuffer=data;
     sendLen=sendLength;
-    if (CatSerial->isOpen())
-    {
-        //qDebug() << "sending..." << sendBuffer;
-        CatSerial->write(sendBuffer);
-    } else
-        qDebug() << "error sending, port is not open";
 
+    // logic: exactly one command is sent to DC. no other command can be sent
+    // until the respond has been read from the serial line.
+
+    if (CatSerial->isOpen()) {
+        if (CatSerial->error() != QSerialPort::NoError) {
+            qCritical() << __func__ << "" << __LINE__ << "ERROR on serial line" << CatSerial->errorString();
+            CatSerial->clearError();
+            qCritical() << __func__ << "" << __LINE__ << "cleared error on serial line";
+        }
+
+        if (!CatSerial->atEnd()) {
+            qCritical() << QString("ERROR %1 bytes available on serial line before write").arg(CatSerial->bytesAvailable());
+            qCritical() << CatSerial->readAll().toHex(':');
+            CatSerial->clear();
+            qCritical() << __func__ << "" << __LINE__ << "read all data from serial line";
+        }
+
+        CatSerial->clear();
+
+        QByteArray buffer(data);
+        int bytesWritten = CatSerial->write(buffer);
+        if (bytesWritten == -1) {
+            qCritical() << __func__ << ":" << __LINE__
+                        << QString("ERROR %1 for sending %2").arg(CatSerial->errorString()).arg(data.toHex(':').constData());
+            CatSerial->clearError();
+            qCritical() << __func__ << ":" << __LINE__ << "cleared error on serial line. returning ...";
+            return;
+        }
+
+        CatSerial->flush();
+        writeCount += 1;
+
+        // only for debugging
+        // if ((unsigned int)data.constData()[2] == 31) { // request dynamic data
+        //    qCritical() << __func__ << ":" << __LINE__ << QDateTime::currentDateTime().time().toString(Qt::ISODateWithMs)
+        //                << "write cmd" << (unsigned int)data.constData()[2];
+        //}
+    } else {
+        qCritical() << __func__ << ":" << __LINE__
+                    << "ERROR sending" << data.toHex(':') << "port is not open";
+    }
 }
 
 
@@ -82,6 +118,7 @@ T_com::T_com(QObject *parent) : QObject(parent)
     ChkConnectTimer->setSingleShot(false);
     ChkConnectTimer->start(100);     // in ms
     com_want2read=0;
+    writeCount = 0;
 }
 
 
@@ -342,6 +379,11 @@ bool T_com::isPortOpen(void)
     return false;
 }
 
+void T_com::flushPort(void)
+{
+    if (CatSerial->isOpen())
+        CatSerial->clear();
+}
 
 // -------------------------------------------------------------------------------------------------------------
 // -------------------------------------------------------------------------------------------------------------

src/controlBus.cpp

@@ -496,6 +496,31 @@ uint8_t epi_getBatchResult()
 
 
 
+// 8.10.2024 new, control power up/down
+/*
+void gpi_storePowerState(bool ptu_sleep, bool ptu_wake, bool dc_sleep, bool dc_wake)
+{
+    if (ptu_sleep)
+        SharedMem::write()->Sdata_ptuInSleep=true;
+    if (ptu_wake)
+        SharedMem::write()->Sdata_ptuInSleep=false;
+    if (dc_sleep)
+        SharedMem::write()->Sdata_dcInSleep=true;
+    if (dc_wake)
+        SharedMem::write()->Sdata_dcInSleep=false;
+
+}
+
+bool epi_getPowerState_ptu()
+{
+    return SharedMem::read()->Sdata_ptuInSleep;
+}
+
+bool epi_getPowerState_dc()
+{
+    return SharedMem::read()->Sdata_dcInSleep;
+}
+*/
 
 
 

src/datIf.cpp

@@ -6,10 +6,12 @@ History:
 
 */
 #include "datIf.h"
+#include "hwapi.h"
 #include "sendWRcmd.h"
 #include "controlBus.h"
 #include "storeINdata.h"
 #include <QDebug>
+#include <QDateTime>
 #include <datei.h>
 #include <QDir>
 
@@ -43,6 +45,8 @@ static uint8_t datif_repeatCtr;
 static uint8_t datif_kindOfCmd;
 
 static uint8_t datif_pNextCmd, datif_sendSlowCmd;
+static char testSerial;
+static bool autoRequestWasOnBeforePowerDown;
 
 //#define     DATIF_MAXTO_WAIT4RESP       80      //20 erhöht am 17.7 geht viel besser
     // höchster gemessener Wert (bei 20ms): 6
@@ -120,10 +124,11 @@ T_datif::T_datif(QObject *parent) : QObject(parent)
     datei_clearFile(FILENAME_SHAREDDATA);
     datei_writeToFile(FILENAME_SHAREDDATA, myBA);
 */
-    doRepeat=true;
+    doRepeat=false;
     datif_pNextCmd=0;
     datif_sendSlowCmd=0;
-
+    testSerial=99;
+    autoRequestWasOnBeforePowerDown=false;
 }
 
 void T_datif::resetChain(void)
@@ -161,22 +166,23 @@ char T_datif::datif_cycleSend()
 
     // supervise if DC data are valid
     datif_noResponseCtr++;         // inc every 20ms
-    if (datif_noResponseCtr>50)   // no life sign from device controller (DC) for about a sec
+    if (datif_noResponseCtr>250)   // no life sign from device controller (DC) for about a sec
-     {
+     {                              // 10.7.2025: timeout increased 50-->250 (1s-->5s)
         epi_resetDcDataValid(3);    // DC data has not updated for >=5s -> no longer valid!
         datif_nowNewDyns=0;
         datif_nowNewStats=0;
-
+        testSerial=0;               // New, 11.10.20TS
+        datif_noResponseCtr=0;      // New, 11.10.20TS
     }
     // 24.7.24 new, data are valid if dynamic machine conditions AND dyn machine states came in
     if (datif_nowNewDyns && datif_nowNewStats && !epi_areDcDataValid() )
         epi_setDcDataValid();
 
     // Ueberwachung ob ein oder mehrere Commands am Stueck erfolgreich waren
-    if (gpi_wantToResetSupervision())
+    //if (gpi_wantToResetSupervision())
-    {
+    //{
-        gpi_storeOverallResult(0xFF);
+     //   gpi_storeOverallResult(0xFF);
-    }
+    //}
 
 
 
@@ -216,16 +222,7 @@ char T_datif::datif_cycleSend()
             gpi_storeLastResult(8);
             return 0;
         }
-/*
+
- * Unsinn, wird nie durchlaufen
-        if (cycl_running>=(RESPONSEWAITTIME+6))  // 3.7.24: 101-->110
-        {
-            // Antwort ist gekommen, also nach kurzer Luecke naechstes (datif_cmdWasPerformed==1)
-            //      oder nochmal gleiches (datif_cmdWasPerformed==2) Kommando senden
-            //qDebug()<< "datif got any response";
-            cycl_running=0;            
-        }
-*/
         // hier stoppen, weil Antwort des letzten Cmds noch nicht da
         return 0;
     }
@@ -363,19 +360,53 @@ char T_datif::datif_cycleSend()
     }
 
     // if no direct comands need to be sent then send input requests
+
+    // new, 8.10.2024, avoid wrong messages right after wake-up
+    if ( testSerial==1)
+    {
+        myDCIF->setUserWriteData(0, 0,0, data);
+        myDCIF->setUserReadData(CMD2DC_TestSerial);
+        myDCIF->sendUserData(selectedSlaveAddr);
+        // request fixed string from DC and thus wait until DC is ready
+        cycl_running=1;     // 1: start transmission
+        datif_kindOfCmd=0;
+        datif_repeatCtr=0;
+        doRepeat=false;
+    } else
+    if ( testSerial==2)
+    {
+        if (autoRequestWasOnBeforePowerDown)
+            epi_startEmmision(true);
+        testSerial++;
+    } else
+
     if (gpi_isEmmisionOn())     // auto send button is pressed
     {
         //qDebug() << "auto request is on";
         datif_kindOfCmd=0;
-        sendINrequestsAutomatic();        // request all cyclic data sequential
+        if (testSerial==0)
-    }
+        {
-    else
+            // start with test command after wakeup
+            testSerial=1;
+        } else
+        {
+            sendINrequestsAutomatic();        // request all cyclic data sequential
+            autoRequestWasOnBeforePowerDown=true;
+        }
+    } else
     {
+        // new: after stopping auto-request flush com port ONE time, 6.11.24TS
+        // why? to get boot loader response correct at first request
+        // without flushing we got the response of last cyclic data request in buffer
+        if (autoRequestWasOnBeforePowerDown)
+            myDCIF->flushPort();
+
         dif_scanStep=0;         // always start from beginning
         epi_resetDcDataValid(4);
         datif_nowNewDyns=0;
         datif_nowNewStats=0;
-
+        autoRequestWasOnBeforePowerDown=false;
+        testSerial=0;
     }
 
     datif_cmdWasPerformed=0;    // 0: no response by now
@@ -400,8 +431,11 @@ char T_datif::sendINrequestsAutomatic(void)
     uint8_t datif_maxNrCommands=35, datif_sendNow;
 
     // send quicker while transaction is ongoing:
-    uint8_t datif_vendRequCommandList[15]={102,107,108,110,112,115,116,31,32,40,41,42,23,0,0};
+    //uint8_t datif_vendRequCommandList[15]={102,107,108,110,112,115,116,31,32,40,41,42,23,0,0};
-    uint8_t datif_maxVendingCmds=13;
+    //uint8_t datif_maxVendingCmds=13;
+	// 30 muss drin sein um coin attach zu erkennen:
+    uint8_t datif_vendRequCommandList[15]={102,107,108,110,112,115,116, 30, 31,32,40,41,42,23,0};
+    uint8_t datif_maxVendingCmds=14;
 
     // special commands:
     // 102: get IOs run constantly!!!
@@ -480,6 +514,76 @@ void T_datif::StoredRecData()
     gpi_storeLastResult(res);
 }
 
+static void dump(T_moduleCondition const *modCond) {
+    qCritical() << QString("modCond->ram                %1 (%2)").arg(modCond->ram).arg(modCond->ram, 0, 16);
+    qCritical() << QString("modCond->intEe              %1 (%2)").arg(modCond->intEe).arg(modCond->intEe, 0, 16);
+    qCritical() << QString("modCond->extEe              %1 (%2)").arg(modCond->extEe).arg(modCond->extEe, 0, 16);
+    qCritical() << QString("modCond->rtc                %1 (%2)").arg(modCond->rtc).arg(modCond->rtc, 0, 16);
+    qCritical() << QString("modCond->boardHw            %1 (%2)").arg(modCond->boardHw).arg(modCond->boardHw, 0, 16);
+    qCritical() << QString("modCond->printer            %1 (%2)").arg(modCond->printer).arg(modCond->printer, 0, 16);
+    qCritical() << QString("modCond->modem              %1 (%2)").arg(modCond->modem).arg(modCond->modem, 0, 16);
+    qCritical() << QString("modCond->signal             %1 (%2)").arg(modCond->signal).arg(modCond->signal, 0, 16);
+
+    qCritical() << QString("modCond->regist             %1 (%2)").arg(modCond->regist).arg(modCond->regist, 0, 16);
+    qCritical() << QString("modCond->mdbBus             %1 (%2)").arg(modCond->mdbBus).arg(modCond->mdbBus, 0, 16);
+    qCritical() << QString("modCond->coinChecker        %1 (%2)").arg(modCond->coinChecker).arg(modCond->coinChecker, 0, 16);
+    qCritical() << QString("modCond->coinEscrow         %1 (%2)").arg(modCond->coinEscrow).arg(modCond->coinEscrow, 0, 16);
+
+    qCritical() << QString("modCond->mifareReader       %1 (%2)").arg(modCond->mifareReader).arg(modCond->mifareReader, 0, 16);
+    qCritical() << QString("modCond->creditTerm         %1 (%2)").arg(modCond->creditTerm).arg(modCond->creditTerm, 0, 16);
+    qCritical() << QString("modCond->coinReject         %1 (%2)").arg(modCond->coinReject).arg(modCond->coinReject, 0, 16);
+    qCritical() << QString("modCond->coinSafe           %1 (%2)").arg(modCond->coinSafe).arg(modCond->coinSafe, 0, 16);
+
+    qCritical() << QString("modCond->billSafe           %1 (%2)").arg(modCond->billSafe).arg(modCond->billSafe, 0, 16);
+    qCritical() << QString("modCond->voltage            %1 (%2)").arg(modCond->voltage).arg(modCond->voltage, 0, 16);
+    qCritical() << QString("modCond->temper             %1 (%2)").arg(modCond->temper).arg(modCond->temper, 0, 16);
+    qCritical() << QString("modCond->poweronTest        %1 (%2)").arg(modCond->poweronTest).arg(modCond->poweronTest, 0, 16);
+
+    qCritical() << QString("modCond->doorState          %1 (%2)").arg(modCond->doorState).arg(modCond->doorState, 0, 16);
+    qCritical() << QString("modCond->doorWasOpened      %1 (%2)").arg(modCond->doorWasOpened).arg(modCond->doorWasOpened, 0, 16);
+    qCritical() << QString("modCond->changer            %1 (%2)").arg(modCond->changer).arg(modCond->changer, 0, 16);
+    qCritical() << QString("modCond->coinBlocker        %1 (%2)").arg(modCond->coinBlocker).arg(modCond->coinBlocker, 0, 16);
+
+    qCritical() << QString("modCond->billReader         %1 (%2)").arg(modCond->billReader).arg(modCond->billReader, 0, 16);
+    qCritical() << QString("modCond->ResetReason        %1 (%2)").arg(modCond->ResetReason).arg(modCond->ResetReason, 0, 16);
+    qCritical() << QString("modCond->allModulesChecked  %1 (%2)").arg(modCond->allModulesChecked).arg(modCond->allModulesChecked, 0, 16);
+    qCritical() << QString("modCond->alarmState         %1 (%2)").arg(modCond->alarmState).arg(modCond->alarmState, 0, 16);
+    qCritical() << QString("modCond->fuses              %1 (%2)").arg(modCond->fuses).arg(modCond->fuses, 0, 16);
+}
+
+static void dump(T_dynamicCondition const *dynCond) {
+    qCritical() << QString("dynCond->allDoorsDebounced      %1 (%2)").arg((unsigned char)dynCond->allDoorsDebounced).arg((unsigned char)dynCond->allDoorsDebounced, 0, 16);
+    qCritical() << QString("dynCond->openedAuthorized       %1 (%2)").arg((unsigned char)dynCond->openedAuthorized).arg((unsigned char)dynCond->openedAuthorized, 0, 16);
+    qCritical() << QString("dynCond->CBinDebounced          %1 (%2)").arg((unsigned char)dynCond->CBinDebounced).arg((unsigned char)dynCond->CBinDebounced, 0, 16);
+    qCritical() << QString("dynCond->upperDoor              %1 (%2)").arg((unsigned char)dynCond->upperDoor).arg((unsigned char)dynCond->upperDoor, 0, 16);
+    qCritical() << QString("dynCond->middleDoor             %1 (%2)").arg((unsigned char)dynCond->middleDoor).arg((unsigned char)dynCond->middleDoor, 0, 16);
+    qCritical() << QString("dynCond->lowerDoor              %1 (%2)").arg((unsigned char)dynCond->lowerDoor).arg((unsigned char)dynCond->lowerDoor, 0, 16);
+    qCritical() << QString("dynCond->middleDoor             %1 (%2)").arg((unsigned char)dynCond->middleDoor).arg((unsigned char)dynCond->middleDoor, 0, 16);
+    qCritical() << QString("dynCond->coinAttached           %1 (%2)").arg((unsigned char)dynCond->coinAttached).arg((unsigned char)dynCond->coinAttached, 0, 16);
+    qCritical() << QString("dynCond->billBox                %1 (%2)").arg((unsigned char)dynCond->billBox).arg((unsigned char)dynCond->billBox, 0, 16);
+    qCritical() << QString("dynCond->modeAbrech             %1 (%2)").arg((unsigned char)dynCond->modeAbrech).arg((unsigned char)dynCond->modeAbrech, 0, 16);
+    qCritical() << QString("dynCond->onAlarm                %1 (%2)").arg((unsigned char)dynCond->onAlarm).arg((unsigned char)dynCond->onAlarm, 0, 16);
+    qCritical() << QString("dynCond->nowCardTest            %1 (%2)").arg((unsigned char)dynCond->nowCardTest).arg((unsigned char)dynCond->nowCardTest, 0, 16);
+    qCritical() << QString("dynCond->nowPayment             %1 (%2)").arg((unsigned char)dynCond->nowPayment).arg((unsigned char)dynCond->nowPayment, 0, 16);
+    qCritical() << QString("dynCond->lastMifCardType        %1 (%2)").arg((unsigned char)dynCond->lastMifCardType).arg((unsigned char)dynCond->lastMifCardType, 0, 16);
+    qCritical() << QString("dynCond->lastSDoorState         %1 (%2)").arg(dynCond->lastSDoorState).arg(dynCond->lastSDoorState, 0, 16);
+    qCritical() << QString("dynCond->lastVDoorState         %1 (%2)").arg(dynCond->lastVDoorState).arg(dynCond->lastVDoorState, 0, 16);
+    qCritical() << QString("dynCond->lastCBstate            %1 (%2)").arg(dynCond->lastCBstate).arg(dynCond->lastCBstate, 0, 16);
+    qCritical() << QString("dynCond->paymentInProgress      %1 (%2)").arg((unsigned char)dynCond->paymentInProgress).arg((unsigned char)dynCond->paymentInProgress, 0, 16);
+    qCritical() << QString("dynCond->U_Batt                 %1 (%2)").arg(dynCond->U_Batt).arg(dynCond->U_Batt, 0, 16);
+    qCritical() << QString("dynCond->nrCoinsInBox           %1 (%2)").arg(dynCond->nrCoinsInBox).arg(dynCond->nrCoinsInBox, 0, 16);
+    qCritical() << QString("dynCond->amountInBox            %1 (%2)").arg(dynCond->amountInBox).arg(dynCond->amountInBox, 0, 16);
+    qCritical() << QString("dynCond->totalTransVolume       %1 (%2)").arg(dynCond->totalTransVolume).arg(dynCond->totalTransVolume, 0, 16);
+    qCritical() << QString("dynCond->totalNrOfVends         %1 (%2)").arg(dynCond->totalNrOfVends).arg(dynCond->totalNrOfVends, 0, 16);
+    qCritical() << QString("dynCond->resultOfLastTemplPrint %1 (%2)").arg((unsigned char)dynCond->resultOfLastTemplPrint).arg((unsigned char)dynCond->resultOfLastTemplPrint, 0, 16);
+    qCritical() << QString("dynCond->lastPrinterStatus      %1 (%2)").arg(dynCond->lastPrinterStatus).arg(dynCond->lastPrinterStatus, 0, 16);
+    qCritical() << QString("dynCond->startupTestIsRunning   %1 (%2)").arg(dynCond->startupTestIsRunning).arg(dynCond->startupTestIsRunning, 0, 16);
+    qCritical() << QString("dynCond->totalNrOfCuts          %1 (%2)").arg(dynCond->totalNrOfCuts).arg(dynCond->totalNrOfCuts, 0, 16);
+    qCritical() << QString("dynCond->nextAccountNumber      %1 (%2)").arg(dynCond->nextAccountNumber).arg(dynCond->nextAccountNumber, 0, 16);
+    qCritical() << QString("dynCond->nrOfBillsInBox         %1 (%2)").arg(dynCond->nrOfBillsInBox).arg(dynCond->nrOfBillsInBox, 0, 16);
+    qCritical() << QString("dynCond->UbatAtLastPrint        %1 (%2)").arg(dynCond->UbatAtLastPrint).arg(dynCond->UbatAtLastPrint, 0, 16);
+}
+
 char T_datif::loadRecDataFromFrame()
 {
     // is called even with wrong received data in order to speed up the process (stop waiting for response)
@@ -513,6 +617,8 @@ char T_datif::loadRecDataFromFrame()
         return 0;
     }
 
+    memset(receivedData, 0x00, sizeof(receivedData));
+
     ret=myDCIF->getReceivedInData(&SlaveAdr, &readSource, &readAddress,  &RdDleng, receivedData);
         // nur true wenn CommandState OK und readState OK
 
@@ -545,6 +651,7 @@ char T_datif::loadRecDataFromFrame()
 
     gpi_storeRecPayLoad(RdDleng, receivedData); //  save for host (user of hwapi)
 
+    //sub_gerhardsDiagnose();
     // uint8_t nn;
     //qDebug() << "\n datif: got valid data, rdsrc:" << readSource << "  rdadd:" << readAddress
      //        << "  rdlen:" << RdDleng;
@@ -587,8 +694,11 @@ char T_datif::loadRecDataFromFrame()
             ret=verifyLineTestresponse(RdDleng, receivedData);
             gpi_storeResult_serialTestOK(ret);
             if (ret==true)
+            {
                 gpi_setTxt4datifLine("correct");
-            else
+                if ( testSerial==1) testSerial=2;   // nach wake kam richtige Antwort
+
+            } else
                 gpi_setTxt4datifLine("false");
             break;
 
@@ -1017,7 +1127,10 @@ char T_datif::loadRecDataFromFrame()
             uitmp=0;
             uit2=0;
         }
-        if ((newInsertedAmount != lastInsertedAmount) || uit2>0 )
+        //if ((newInsertedAmount != lastInsertedAmount) || uit2>0 )
+        if ((newInsertedAmount != lastInsertedAmount) || uit2==3
+                || uit2==5  || uit2==10 || uit2==25  || uit2==40
+                || uit2==50 || uit2==100 || uit2==200 || uit2==500 )
         {
             gpi_storeCurrentPayment(newInsertedAmount, uitmp, uit2);
             emit datif_gotNewCoin();    // OR BILL  if (uitmp & 0x8000)>0

src/dcBL.cpp

@@ -242,11 +242,7 @@ uint8_t dcBL_sendFlashStartAddr2BL(uint32_t startAddr, uint8_t *sendData)
     myBuf[2]=ulongTOuchar(startAddr, GETMIDLOWBYTE);
     myBuf[3]=ulongTOuchar(startAddr, GETLOWBYTE);
     myBuf[4]=0;
-
+    //qDebug()<<"dcBL_sendFlashStartAddr2BL "<<myBuf[0]<<" "<<myBuf[1]<<" "<<myBuf[2]<<" "<<myBuf[3];
-
-qDebug()<<"dcBL_sendFlashStartAddr2BL "<<myBuf[0]<<" "<<myBuf[1]<<" "<<myBuf[2]<<" "<<myBuf[3];
-
-
     return dcBL_prepareDC_BLcmd(0x21, 4, myBuf, sendData);
 }
 
@@ -258,9 +254,9 @@ uint8_t dcBL_writeLastPage(uint8_t *sendData)
     strclr(myBuf, 0, 2);
     ret=dcBL_prepareDC_BLcmd(0x22, 0, myBuf, sendData);
 
-qDebug()<<"dcBL just sending last block command, ret: "<<ret<<" "<<sendData[0]
+//qDebug()<<"dcBL just sending last block command, ret: "<<ret<<" "<<sendData[0]
-    <<" "<<sendData[1]<<" "<<sendData[2]<<" "<<sendData[3]<<" "<<sendData[4]
+//    <<" "<<sendData[1]<<" "<<sendData[2]<<" "<<sendData[3]<<" "<<sendData[4]
-    <<" "<<sendData[5]<<" "<<sendData[6]<<" "<<sendData[7];
+//    <<" "<<sendData[5]<<" "<<sendData[6]<<" "<<sendData[7];
 
         return ret;
 }
@@ -332,7 +328,12 @@ uint8_t dcBL_getResponse(uint8_t *respBuff)
         //dcBL_writeText("dcBL gotResponse");
 
     }
-
+    if (recLen>=150)
+    {
+        dcBL_writeText("dcBL rec.buff. overflow");
+        epi_clrRawReceivedString();
+        recLen=0;
+    }
     return recLen;
 }
 
@@ -402,8 +403,8 @@ uint8_t dcBL_sendSuccess(uint8_t lastCommand)
     if (recLen==0)
         return 0;    // no response by now
 
-//    qDebug()<<"dcBL_sendSuccess: got BL data"<< recLen <<
+    qDebug()<<"dcBL_sendSuccess: got BL data"<< recLen <<
-//        Indata[0]<< Indata[1]<<  Indata[2]<<  Indata[3] << Indata[4]<< Indata[5]<< Indata[6]<< Indata[7];
+        Indata[0]<< Indata[1]<<  Indata[2]<<  Indata[3] << Indata[4]<< Indata[5]<< Indata[6]<< Indata[7];
 
     if (Indata[0]==2 && Indata[1]==(lastCommand | 0x80) )
         return 10;    //  OK
@@ -663,8 +664,8 @@ void dcBL_sendAddress(uint16_t blockNumber)
         dcBL_BlkCtr*=64;
         len=dcBL_sendFlashStartAddr2BL(dcBL_BlkCtr, buf);   // make command string
 
-//qDebug()<<"dcBL_bl_sendAddress "<<buf[0]<<" "<<buf[1]<<" "<<buf[2]<<" "<<buf[3]<<" "
+        qDebug()<<"dcBL_bl_sendAddress "<<buf[0]<<" "<<buf[1]<<" "<<buf[2]<<" "<<buf[3]<<" "
-//         <<buf[4]<<" "<<buf[5]<<" "<<buf[6]<<" ";
+         <<buf[4]<<" "<<buf[5]<<" "<<buf[6]<<" ";
 
         sendWRcmd_setSendBlock160(len, buf);        // send command to BL
     }
@@ -695,7 +696,7 @@ uint8_t dcBL_getFileBlock(uint16_t blockPointer, uint8_t *buf)
 }
 
 static uint16_t block2beSentNow, blTimeOutCounter;
-static uint8_t  blChainStep, blChainResult, blRepeatCounter;
+static uint8_t  blChainStep, blChainResult, blRepeatCounter, blRepeatOnErrorCtr;
 
 bool dcBL_sendOneBlockCpl(uint16_t blockNumber)
 {
@@ -712,6 +713,7 @@ bool dcBL_sendOneBlockCpl(uint16_t blockNumber)
     blChainResult=0;
     blTimeOutCounter=0;
     blRepeatCounter=0;
+    blRepeatOnErrorCtr=0;
     return true;
 }
 
@@ -725,10 +727,17 @@ int8_t dcBL_getBlockResult(void)
 
 }
 
+void dcBL_cancelSending(void)
+{
+    blChainStep=99;
+}
 
 char dcBL_cycle(void)
 {
-    // to be called cyclic every 100ms
+    // to be called cyclic every 10ms
+    // this step chain sends ONE data block (64byte) and repeats if neccesary
+    // stop on timeout, 3xerror or success
+
     uint8_t buf[70], sendBuf[160], ret, sendLen;
 
     if (blChainStep==1)
@@ -737,9 +746,10 @@ char dcBL_cycle(void)
         if (block2beSentNow==0 || block2beSentNow==1024 || block2beSentNow==2048
                                || block2beSentNow==3072 || block2beSentNow==4096 )
         {
-
+            epi_clrRawReceivedString();
             dcBL_sendAddress(block2beSentNow);
             blChainStep++;
+            blTimeOutCounter=0;
             //qDebug()<<"dcBL_cycle sending address and wait for response";
             return 0;   // continue in 100ms
         } else
@@ -757,7 +767,8 @@ char dcBL_cycle(void)
 
             blChainStep=10;     // OK, continue with data
             blTimeOutCounter=0;
-            return 0;   // continue in 100ms
+            blRepeatOnErrorCtr=0;
+            return 0;   // continue in 10ms
         }
         if (ret==1)
         {
@@ -770,28 +781,32 @@ char dcBL_cycle(void)
                 blChainStep=1;      // repeat
             else
             {
+                qDebug()<<"dcBL cancel, wrong resp. to addr";
                 blChainResult=3;    // error timeout, no response from DC-BL
                 blChainStep=99;
                 return 0;
             }
             return 0;   // continue in 100ms
         }
+        // noch keine Antwort:
         blTimeOutCounter++;
-        if (blTimeOutCounter>=3)    // wait 3 cycles (3x100ms) for response
+        if (blTimeOutCounter>=20)    // wait 5 cycles (5x10ms) for response
         {
-            //qDebug()<<"dcBL_cycle TO";
+            blRepeatOnErrorCtr++;
-
+            if (blRepeatOnErrorCtr<5)
-            blChainResult=3;    // error timeout, no response from DC-BL
+            {
-            blChainStep=99;
+                // keine Antwort, nochmal senden
-            return 0;
+                blChainStep=1;      // repeat
-        } else
+                //qDebug()<<"dcBL_cycle no response";
-        {
+                return 0;   // continue in 100ms
-            // ein oder zweimal keine Antwort
+            } else
-            blChainStep=1;      // repeat
+            {
-
+                // 5x keine Antwort, Abbruch
-            //qDebug()<<"dcBL_cycle no response";
+                qDebug()<<"dcBL cancel, no resp. to addr";
-
+                blChainResult=3;    // error timeout, no response from DC-BL
-            return 0;   // continue in 100ms
+                blChainStep=99;
+                return 0;
+            }
         }
     }
 
@@ -799,6 +814,7 @@ char dcBL_cycle(void)
     if (blChainStep==10)
     {
         // send data block or conclusion
+        epi_clrRawReceivedString();
         if (block2beSentNow == dcBL_nrOfBlocks)
         {
             // very last blocknumber, send conclusion
@@ -808,14 +824,28 @@ char dcBL_cycle(void)
         {
             // send data...
             dcBL_getFileBlock(block2beSentNow, buf);
-
             //qDebug()<<"dcBL sending data block"<<block2beSentNow;
-
             sendLen=dcBL_prepareDC_BLcmd(0x22, 64, buf, sendBuf);   // pack into protocol frame
+
+            //sendBuf[sendLen-1]=0;   // testweise ETX verbiegen um Fehlerreaktion zu testen
+            // tested 2024.11.11: send without ETX, got no response, sending is repeated 4x, correct
+
+            //   sendBuf[sendLen-2]=0;   // testweise crc verbiegen
+            // tested 2024.11.11: send with wrong crc, got error-response, repeat 4x, OK
+
+            //if (blRepeatCounter<3)
+             //   sendBuf[sendLen-2]=0;   // testweise crc 3x verbiegen, bei 4. mal richtig senden
+            // tested 2024.11.11: send with wrong crc, got error-response,  OK
+
+            //sendBuf[50]=0;   // testweise nur die Haelft senden
+            // tested 2024.11.11: send incomplete, is repeated 4x then stop, everything correct
+
             sendWRcmd_setSendBlock160(sendLen, sendBuf);            // send up to 140 bytes
+
         }
 
         blChainStep++;
+        blTimeOutCounter=0;
     } else
 
     if (blChainStep==11)
@@ -829,36 +859,44 @@ char dcBL_cycle(void)
             blChainResult=1;        // block sent succesful
             if (block2beSentNow == dcBL_nrOfBlocks)
                 blChainResult=2;    // transfer complete
-
             blTimeOutCounter=0;
-            return 0;   // continue in 100ms
+            blRepeatOnErrorCtr=0;
+        return 0;   // continue in 10ms
         }
         if (ret==1)
         {
             // we got response but BL reports an error
             blTimeOutCounter=0;
             blRepeatCounter++;
-            if (blRepeatCounter<3)
+            if (blRepeatCounter<5)
                 blChainStep=10;      // repeat
             else
             {
+                qDebug()<<"dcBL cancel, wrong resp to datablock";
                 blChainResult=3;    // error timeout, no response from DC-BL
                 blChainStep=99;
                 return 0;
             }
-            return 0;   // continue in 100ms
+            return 0;   // continue in 10ms
         }
+
+        // noch keine Antwort:
         blTimeOutCounter++;
-        if (blTimeOutCounter>=3)    // wait 3 cycles (3x100ms) for response
+        if (blTimeOutCounter>=20)    // wait 200ms for response, normal value=40...70ms
-        {
+        {        
-            blChainResult=3;    // error timeout, no response from DC-BL
+            // no response after 50ms
-            blChainStep=99;
+           blRepeatOnErrorCtr++;
-            return 0;
+            if (blRepeatOnErrorCtr<5)
-        } else
+            {
-        {
+                blChainStep=10;      // repeat
-            // ein oder zweimal keine Antwort
+                return 0;           // continue in 10ms
-            blChainStep=10;      // repeat
+            } else
-            return 0;   // continue in 100ms
+            {
+                qDebug()<<"dcBL cancel, no resp to datablock";
+               blChainResult=3;    // error timeout, no response from DC-BL
+               blChainStep=99;
+               return 0;
+            }
         }
     }
 

src/download_thread.cpp

@@ -1,320 +0,0 @@
-#include "download_thread.h"
-#include "shared_mem_buffer.h"
-#include "hwapi.h"
-
-#include <QDebug>
-#include <QDateTime>
-
-
-DownloadThread::DownloadThread(hwinf *hw)
-  : m_hw(hw)
-  , m_fileToDownload(m_hw->dcDownloadFileName()) {
-    // connect(this, &QThread::finished,
-    //        dynamic_cast<QObject const *>(m_hw), &QThread::deleteLater);
-}
-
-DownloadThread::~DownloadThread() {
-}
-
-/*
- ///////////////////////////////////////////////////////////////////////////////
- //
- //                        USING THE DC BOOTLOADER
- //
- ///////////////////////////////////////////////////////////////////////////////
-
- 1  :   bl_reboot()     // send to application, want DC2 to reset (in order to
-                        // start the bootloader)
-                        //
-                        // NOTE: this function is NOT reliable !!! Sometimes it
-                        // simply does not work, in which case bl_startBL,
-                        // bl_checkBL and bl_isUp do not work as well.
-                        // Alas, there is no feedback if bl_reboot worked!
-                        //
-                        // NOTE: this function can be called only once per
-                        // minute, because once called again, the controller
-                        // performs some self-checks consuming some time.
-                        //
-                        // NOTE: after a successful bl_reboot(), the device is
-                        // waiting about 4 seconds in the bootloader. To stay in
-                        // the bootloader, we have to send the command
-                        // bl_startBL(), which is kind of a misnomer, as it
-                        // should be bl_doNotLeaveBL().
-                        //
- 2  :   bl_startBL():   // send within 4s after DC power-on, otherwise
-                        // bootloader is left.
-                        //
-                        // NOTE: a running bootloader is a MUST for the download
-                        // process of a device controller firmware as it does
-                        // the actual writing of the memory (the bl_reboot()
-                        // from above erases the available memory).
-                        //
- 3  :   bl_check():     // send command to verify if bl is up
-                        //
-                        // NOTE: this command is kind of a request that we want
-                        // to check if the bootloader is up. The device
-                        // (actually the bootloader) responds with its version.
-                        //
- 4  :   bl_isUp():      // returns true if bl is up and running
-                        //
-                        // NOTE: we know what the bootloader version actually is
-                        // as the bootloader does not change. By comparing the
-                        // string received in the previous step with this known
-                        // version string we know if the bootloader is up.
-                        //
-                        // NOTE FOR ALL PREVIOUS STEPS: execute them in their
-                        // own slots each to be sure to receive any possible
-                        // responds from the device.
-                        //
- 5  :   bl_sendAddress(blockNumber)
-                        // send start address, nr of 64-byte block, start with 0
-                        // will be sent only for following block-numbers:
-                        // 0, 1024, 2048, 3072 and 4096, so basically every
-                        // 64kByte.
-                        // for other addresses nothing happens
-
- 6  :   bl_wasSendingAddOK()
-                        // return val:  0: no response by now
-                        //              1: error
-                        //             10: OK
-
- 7  :   bl_sendDataBlock()
-                        // send 64 byte from bin file
-
- 8  :   bl_sendLastBlock()
-                        // send this command after all data are transferred
-
- 9  :   bl_wasSendingDataOK()
-                        // return val:  0: no response by now
-                        //              1: error
-                        //             10: OK
-
- 10 :   bl_stopBL()     // leave bl and start (the new) application
-                        //
-                        // NOTE: this function MUST work under all conditions.
-                        // Alas, there is no direct result for this command, so
-                        // the only way of knowing it was successful is to ask
-                        // the device if the bootloader is still running.
-                        // There is no problem to repeat this command until the
-                        // bootloader is really not running anymore.
- */
-void DownloadThread::run() {
-    // download thread running in ca-master sends the dc-file down to firmware
-    // TODO: send the json files as well
-
-    m_hw->dcDownloadRequestAck();
-
-    qCritical() << "DownloadThread::run(): DOWNLOAD THREAD STARTED";
-
-    // load binary device controller file into memory
-    QByteArray ba = loadBinaryDCFile(m_hw->dcDownloadFileName());
-    if (ba.size() > 0) {
-        uint16_t const totalBlocks = (((ba.size())%64)==0) ? (ba.size()/64) : (ba.size()/64)+1;
-        m_hw->dcDownloadSetTotalBlockNumber(totalBlocks);
-
-        // fill last block of data to be sent with 0xFF
-        ba = ba.leftJustified(totalBlocks*64, (char)(0xFF));
-
-        resetDeviceController();
-        if (startBootloader()) {
-
-            qCritical() << "DownloadThread::run(): TOTAL NUMBER OF BYTES TO SEND TO DC" << ba.size();
-            qCritical() << "DownloadThread::run(): TOTAL NUMBER OF BLOCKS" << totalBlocks;
-
-            int currentBlock = 0;
-            DownloadResult res = DownloadResult::OK;
-            qCritical() << "64-byte block " << currentBlock;
-            while (res != DownloadResult::ERROR &&  currentBlock < totalBlocks) {
-                if ((res = sendNextAddress(currentBlock)) != DownloadResult::ERROR) {
-                    if ((res = sendNextDataBlock(ba, currentBlock)) != DownloadResult::ERROR) {
-                        m_hw->dcDownloadSetCurrentBlockNumber(currentBlock);
-                        currentBlock += 1;
-                    }
-                }
-            }
-
-            qCritical() << "DownloadThread::run(): last 64-byte block %04d" << currentBlock;
-
-            int const rest = ba.size() % 64;
-            int const offset = ba.size() - rest;
-            char const *startAddress = ba.constData() + offset;
-
-            if (rest > 0) {
-                // SHOULD NEVER HAPPEN !!!
-                uint8_t local[66];
-                memset(local, 0xFF, sizeof(local));
-                memcpy(local, startAddress, rest);
-                qCritical() << "DownloadThread::run(): ERROR SEND REMAINING" << rest << "BYTES";
-                m_hw->bl_sendDataBlock(64, local);
-            } else {
-                m_hw->bl_sendLastBlock();
-                m_hw->dcDownloadSetCurrentBlockNumber(currentBlock);
-            }
-            qCritical() << "DownloadThread::run(): last result" << (int)sendStatus(m_hw->bl_wasSendingDataOK());
-        }
-        stopBootloader();   // there is no harm in stopping the bootloader even
-    }                       // if it was not started at all
-
-#if 0
-    // test code:
-    uint16_t const totalBlocks = 100;
-    m_hw->dcDownloadSetTotalBlockNumber(totalBlocks);
-
-    for (uint16_t currentBlock = 0; currentBlock <= totalBlocks; ++currentBlock) {
-        m_hw->dcDownloadSetCurrentBlockNumber(currentBlock);
-        QThread::msleep(100);
-    }
-#endif
-
-    m_hw->dcDownloadSetRunning(false);
-    m_hw->dcDownloadSetFinished(true);
-
-    qCritical() << QDateTime::currentDateTime().toString(Qt::ISODate) + "DOWNLOAD THREAD FINISHED";
-
-    // the object deletes itself ! This is the last line in run().
-    // Never touch the object after this statement
-    // m_hw->dcDownloadThreadFinalize(this);
-}
-
-DownloadThread::DownloadResult DownloadThread::sendStatus(int ret) const {
-    switch (ret) {                  // return values of dc are:
-    case 0:                         // 0: no answer by now
-        return DownloadResult::NOP; // 1: error
-    case 10:                        // 10: success
-        return DownloadResult::OK;
-    default:;
-    }
-    return DownloadResult::ERROR;
-}
-
-DownloadThread::DownloadResult
-DownloadThread::sendNextAddress(int bNum) const {
-    // sends address only if blockNumber is one of 0, 1024, 2048, 3072, 4096
-    int noAnswerCount = 0;
-    int errorCount = 0;
-    if ( bNum==0 || bNum==1024 || bNum==2048 || bNum==3072 || bNum==4096 ) {
-        // qDebug() << "addr-block" << bNum << "...";
-        while (noAnswerCount <= 250) {
-            m_hw->bl_sendAddress(bNum);
-            QThread::msleep(100);
-            DownloadResult const res = sendStatus(m_hw->bl_wasSendingAddOK());
-            if (res != DownloadResult::NOP) {
-                if (res == DownloadResult::ERROR) {
-                    if (++errorCount >= 10) {
-                        qCritical() << "addr-block" << bNum << "...FAILED";
-                        return res;
-                    }
-                } else { // res == DownloadResult::OK
-                    // qInfo() << "addr-block" << bNum << "...OK";
-
-                        // TODO: hier ins shared-mem schreiben
-
-                    return res;
-                }
-            } else {
-                noAnswerCount += 1; // no answer by now
-            }
-        }
-        // wait max. about 3 seconds
-        return DownloadResult::TIMEOUT;
-    }
-    // blockNumber is not one of 0, 1024, 2048, 3072, 4096 -> do nothing
-    return DownloadResult::NOP;
-}
-
-DownloadThread::DownloadResult
-DownloadThread::sendNextDataBlock(QByteArray const &binary, int bNum) const {
-    uint8_t local[66];
-    int const bAddr = bNum * 64;
-    int noAnswerCount = 0;
-    int errorCount = 0;
-
-    memcpy(local, binary.constData() + bAddr, 64);
-    local[64] = local[65] = 0x00;
-
-    // QByteArray b((const char *)(&local[0]), 64);
-    // qCritical() << "SNDB" << bNum << b.size() << b.toHex();
-
-    while (noAnswerCount <= 250) {
-        m_hw->bl_sendDataBlock(64, local);
-        QThread::msleep(10);
-        DownloadResult const res = sendStatus(m_hw->bl_wasSendingDataOK());
-        if (res != DownloadResult::NOP) {
-            if (res == DownloadResult::ERROR) {
-                if (++errorCount >= 10) {
-                    qCritical() << "data for block" << bNum << "...FAILED";
-                    return res;
-                }
-            } else {
-                // qInfo() << "data for block" << bNum << "OK";
-
-                    // TODO: hier ins shared mem schreiben
-
-                return res;
-            }
-        } else {
-            noAnswerCount += 1; // no answer by now
-        }
-    }
-    // wait max. about 3 seconds
-    return DownloadResult::TIMEOUT;
-}
-
-bool DownloadThread::startBootloader() const {
-    qDebug() << "starting bootloader...";
-    int nTry = 5;
-    while (--nTry >= 0) {
-        m_hw->bl_startBL();
-        QThread::msleep(5000);
-        m_hw->bl_checkBL();
-        if (m_hw->bl_isUp()) {
-            qInfo() << "starting bootloader...OK";
-            QThread::msleep(5000);
-            return true;
-        } else {
-            qCritical() << "bootloader not up (" << nTry << ")";
-        }
-    }
-    qCritical() << "starting bootloader...FAILED";
-    return false;
-}
-
-bool DownloadThread::stopBootloader() const {
-    qDebug() << "stopping bootloader...";
-    int nTry = 5;
-    while (--nTry >= 0) {
-        m_hw->bl_stopBL();
-        QThread::msleep(500);
-        if (!m_hw->bl_isUp()) {
-            qInfo() << "stopping bootloader...OK";
-            return true;
-        }
-    }
-    qCritical() << "stopping bootloader...FAILED";
-    return false;
-}
-
-bool DownloadThread::resetDeviceController() const {
-    qDebug() << "resetting device controller...";
-    m_hw->bl_rebootDC();
-    // wait maximally 3 seconds, before starting bootloader
-    QThread::sleep(1);
-    qInfo() << "resetting device controller...OK";
-    return true;
-}
-
-QByteArray DownloadThread::loadBinaryDCFile(QString filename) const {
-    qDebug() << "loading dc binary" << filename << "...";
-
-    QFile file(filename); // closed in destructor call
-    if (!file.exists()) {
-        qCritical() << file.fileName() << "does not exist";
-        return QByteArray();
-    }
-    if (!file.open(QIODevice::ReadOnly)) {
-        qCritical() << "cannot open file" << file.fileName();
-        return QByteArray();
-    }
-    qInfo() << "loading dc binary" << filename << "...OK";
-    return file.readAll();
-}

src/hwapi.cpp

@@ -9,8 +9,6 @@
 */
 
 #include "hwapi.h"
-#include "download_thread.h"
-#include "reporting_thread.h"
 
 #include <cstring>
 #include <QThread>
@@ -56,7 +54,7 @@ hwapi::hwapi(QObject *parent) : QObject(parent)
 #error "SLAVE LIB COMPILED INTO MASTER"
 #endif
 
-        myDatif = new T_datif();    // für die  CAslave-Lib auskommentieren!
+        myDatif = new T_datif(this);    // für die  CAslave-Lib auskommentieren!
 
 #endif
 
@@ -325,7 +323,14 @@ bool hwapi::dc_isPortOpen(void) const
 void hwapi::dc_autoRequest(bool on) const
 {
     // automatically request ALL digital and analog sensors, get time/date, get status information
+
+    // call this with on=false before power down !!   new, 8.10.2024TS
+
     epi_startEmmision(on);
+
+    if (!on)
+         gpi_storeDcDataValid(0);   // new, 8.10.2024TS
+    // right after wake-up from power down the DC data are not yet valid
 }
 
 
@@ -2625,6 +2630,8 @@ void hwapi::bl_stopBL(void) const     // tested 26.09.2023
     len=dcBL_exitBL(buf);
     sendWRcmd_setSendBlock160(len, buf);
     epi_setNowIsBootload(false);
+    runProcess->resetBLvari();
+    dcBL_cancelSending();
 }
 
 
@@ -4441,11 +4448,6 @@ bool hwapi::dcDownloadRunning() const {
     return false;
 }
 
-void hwapi::dcDownloadThreadFinalize(DownloadThread *dthread) {
-    delete dthread;
-    m_downloadThread = nullptr;
-}
-
 bool hwapi::dcDownloadFinished() {
     SharedMem const *data = SharedMem::getDataConst();
     if (data) {
@@ -4465,73 +4467,6 @@ bool hwapi::dcDownloadFinished() {
     return false;
 }
 
-// download thread
-
-bool hwapi::dcDownloadThreadStart() {
-    m_downloadThread = new DownloadThread(this);
-    if (m_downloadThread) {
-        m_downloadThread->start();
-        int cnt  = 10;
-        while (--cnt > 0 && !dcDownloadThreadRunning()) {
-            QThread::msleep(200);
-        }
-        return (cnt > 0);
-    }
-    return false;
-}
-
-bool hwapi::dcDownloadThreadRunning() const {
-    return (dcDownloadGetRunning() == true)
-        && (dcDownloadGetFinished() == false);
-}
-
-bool hwapi::dcDownloadThreadFinished() const {
-    return (dcDownloadThreadRunning() == false);
-}
-
-
-// report thread
-bool hwapi::dcDownloadReportThreadStart() { // only start reporting thread
-    int cnt = 10;                           // if download thread is running
-    while (--cnt > 0 && !dcDownloadRunning()) {
-        QThread::msleep(500);
-    }
-    if (cnt > 0) {
-        m_reportingThread = new ReportingThread(this);
-        if (m_reportingThread) {
-            m_reportingThread->start();
-            cnt  = 10;
-            while (--cnt > 0 && !dcDownloadReportThreadRunning()) {
-                QThread::msleep(200);
-            }
-            return (cnt > 0);
-        }
-    }
-    return false;
-}
-
-bool hwapi::dcDownloadReportThreadRunning() const {
-    return m_reportingThread ? m_reportingThread->isRunning() : false;
-}
-
-void hwapi::dcDownloadReportThreadFinalize() {
-    if (m_reportingThread) {
-        if (m_reportingThread->isFinished()) {
-            delete m_reportingThread;
-            m_reportingThread = nullptr;
-        }
-    }
-}
-
-void hwapi::dcDownloadReportThreadQuit() {
-    if (m_reportingThread) {
-        m_reportingThread->quit();
-    }
-}
-
-bool hwapi::dcDownloadReportThreadFinished() const {
-    return m_reportingThread ? m_reportingThread->isFinished() : false;
-}
 
 bool hwapi::dcDownloadReportStart() const {
     int cnt = 10;

src/prot.cpp

@@ -368,6 +368,9 @@ uint8_t recBuffer[FRAME_MAXLEN];
     // read from "VCP":
     mySerialPort->readFromSerial(Indata, recLength);
 //qDebug()<<"prot: got data " << recLength;
+
+    memset(recBuffer, 0x00, sizeof(recBuffer));
+
     if (recLength>FRAME_MAXLEN)
         recLength=FRAME_MAXLEN;
     for (int nn=0; nn<recLength; nn++)
@@ -615,8 +618,10 @@ bool T_prot::getReceivedInData(uint8_t  *SlavAddr, uint16_t *readSrc, uint16_t *
     return INdataValid;           // nur true wenn CommandState OK und readState OK
 }
 
-
+void T_prot::flushPort(void)
-
+{
+    mySerialPort->flushPort();
+}
 
 
 

src/reporting_thread.cpp

@@ -1,155 +0,0 @@
-#include "reporting_thread.h"
-#include "shared_mem_buffer.h"
-#include "hwapi.h"
-
-#include <QDateTime>
-#include <QDebug>
-
-ReportingThread::ReportingThread(hwapi *hw)
-  : m_hw(hw)
-  , m_fileToDownload(m_hw->dcDownloadFileName()) {
-}
-
-ReportingThread::~ReportingThread() {
-}
-
-// download thread running in ca-slave sends reports of download process to
-// each component which has connects for the corresponding signals.
-void ReportingThread::run() {
-
-    qCritical() << QDateTime::currentDateTime() << "START DOWNLOAD THREAD";
-
-    static QString report("");
-
-    int cnt = 5;
-    while (!m_hw->dcDownloadGetRunning()) {
-        if (--cnt > 0) {
-            report =  QString("%1 waiting for download to start %2")
-                            .arg(QDateTime::currentDateTime().toString(Qt::ISODate))
-                            .arg(cnt);
-            qCritical() << __LINE__ << "STATUS" << report;
-            emit m_hw->hwapi_reportDCDownloadStatus(report);
-            QThread::sleep(1);
-        } else break;
-    }
-
-#if 0
-    if (cnt == 0) {
-        m_hw->dcDownloadResetRequest();
-        status = QString("%1 reset download request")
-                        .arg(QDateTime::currentDateTime().toString(Qt::ISODate));
-        qCritical() << __LINE__ << "STATUS" << status;
-        emit m_hw->hwapi_reportDCDownloadStatus(status);
-
-        cnt = 5;
-        while (!m_hw->dcDownloadRunning()) {
-            if (--cnt > 0) {
-                QThread::sleep(1);
-            } else break;
-        }
-
-        if (cnt == 0) {
-            status = QString("%1 download request failure")
-                            .arg(QDateTime::currentDateTime().toString(Qt::ISODate));
-            qCritical() << __LINE__ << "STATUS" << status;
-            emit m_hw->hwapi_reportDCDownloadFailure(status);
-            return;
-        }
-    }
-
-    uint16_t const tnr = 1750;
-    uint16_t cnr = 0;
-
-    while (cnr <= tnr) {
-        QThread::msleep(100);
-        QString report("");
-
-        if (cnr > 0) {
-            double percent = ((double)cnr / (double)tnr) * 100.0;
-            report = QString(": total blocks %1, current block %2 [%3]")
-                    .arg(tnr).arg(cnr).arg(percent, 0, 'f', 2);
-        } else {
-            report = QString(": total blocks %1, current block %2 [0]")
-                    .arg(tnr).arg(cnr);
-        }
-        status = QDateTime::currentDateTime().toString(Qt::ISODate) + report;
-
-        qCritical() << "STATUS" << status;
-
-        emit m_hw->hwapi_reportDCDownloadStatus(status);
-        cnr += 1;
-    }
-
-    if (tnr == cnr) {
-        m_hw->hwapi_reportDCDownloadSuccess(
-            QString("SUCCESS DOWNLOADING") + m_fileToDownload);
-    } else {
-        m_hw->hwapi_reportDCDownloadFailure(
-            QString("ERROR DOWNLOADING %1 (total blocks=%2, sent blocks=%3)")
-                .arg(m_fileToDownload).arg(tnr).arg(cnr));
-    }
-
-#endif
-
-    uint16_t const totalBlocks = m_hw->dcDownloadGetTotalBlockNumber();
-
-    qCritical() << QDateTime::currentDateTime() << "TOTAL BLOCKS" << totalBlocks;
-
-    if (totalBlocks) {
-        qint64 const start = QDateTime::currentMSecsSinceEpoch();
-        double durationMillis = 0;
-        uint16_t currentBlockNumber = 0;
-
-        while (m_hw->dcDownloadGetRunning()) {
-            currentBlockNumber = m_hw->dcDownloadGetCurrentBlockNumber();
-
-            durationMillis += QDateTime::currentMSecsSinceEpoch() - start;
-
-            double const timeAveragePerBlock = (currentBlockNumber > 0) ? (durationMillis / currentBlockNumber) : durationMillis;
-            double const estimatedSecondsLeft = (timeAveragePerBlock * (totalBlocks - currentBlockNumber)) / 1000.0;
-
-            double percent = ((double)currentBlockNumber / (double)totalBlocks) * 100.0;
-            report = QString(": total blocks %1, current block %2 [%3] (est. time left: %4s)")
-                        .arg(totalBlocks)
-                        .arg(currentBlockNumber)
-                        .arg(percent, 0, 'f', 2)
-                        .arg(estimatedSecondsLeft, 0, 'f', 2);
-
-            qCritical() << "RT report" << report;
-
-            emit m_hw->hwapi_reportDCDownloadStatus(report);
-            QThread::msleep(100);
-        }
-
-        QThread::msleep(100);
-
-        if (totalBlocks == currentBlockNumber) {
-            m_hw->hwapi_reportDCDownloadSuccess(
-                QString("SUCCESS DOWNLOADING") + m_fileToDownload);
-        } else {
-            m_hw->hwapi_reportDCDownloadFailure(
-                QString("ERROR DOWNLOADING %1 (total blocks=%2, sent blocks=%3)")
-                    .arg(m_fileToDownload).arg(totalBlocks).arg(currentBlockNumber));
-        }
-    }
-
-    qCritical() << QDateTime::currentDateTime() << __PRETTY_FUNCTION__
-                << QString("line=%1 REPORT THREAD ABOUT TO FINISH").arg(__LINE__);
-
-    cnt = 10;
-
-    bool running = m_hw->dcDownloadGetRunning();
-    bool finished = m_hw->dcDownloadGetFinished();
-
-    while (--cnt > 0 && (running && !finished)) {
-        qCritical() << QDateTime::currentDateTime() << __PRETTY_FUNCTION__
-                    << QString("line=%1 REPORT THREAD: WAIT FOR END OF DOWNLOAD THREAD %2 %3 (%4)")
-            .arg(__LINE__).arg(running).arg(finished).arg(cnt);
-        QThread::sleep(1);
-        running = m_hw->dcDownloadGetRunning();
-        finished = m_hw->dcDownloadGetFinished();
-    }
-
-    qCritical() << QDateTime::currentDateTime() << __PRETTY_FUNCTION__
-                << QString("line=%1 FINISH REPORT THREAD").arg(__LINE__);
-}

src/runProc.cpp

@@ -9,7 +9,7 @@ static uint8_t  hwapi_cash_lastCollectionState;
 static uint8_t  hwapi_paymentStarted;
 static uint8_t  hwapi_lastDoorState;
 static uint8_t  bl_startupStep;
-
+static uint8_t  runProc_BLisStarted;
 
 
 T_runProc::T_runProc()
@@ -643,6 +643,7 @@ void T_runProc::bl_completeStart(void)
     bl_startupStep=1;
 }
 
+
 bool T_runProc::bl_performComplStart(void)
 {
     bool result;
@@ -727,7 +728,12 @@ bool T_runProc::bl_performComplStart(void)
 }
 
 
+void T_runProc::resetBLvari(void)
+{
+    // reset with BL-stop command
+    runProc_BLisStarted=0;
 
+}
 
 
 // new from 21.5.24 ..................................................................
@@ -1328,6 +1334,7 @@ void T_runProc::sub_changeStyle(char *valueStr)
                 // 10th:height  1th=width
     "styl":"align c"	// 'l' 'c' 'r'    // left  center  right
     "styl":"density25";	//  0....[25]...50   0=blass
+    "styl":"csiz 12"    // character size 6..20, new 26.7.2024
     */
 
     uint8_t val;
@@ -1397,7 +1404,16 @@ void T_runProc::sub_changeStyle(char *valueStr)
         val=uint8_t(tslib_atol(&valueStr[7]));
         runProc_prnCmdSeq[runProc_pointPrnCmd]=19;
         runProc_prnCmdPara[runProc_pointPrnCmd++]=val;
+    } else
+
+    if ( memcmp(valueStr, "csiz ", 5) ==0 )
+    {
+        valueStr[7]=0;
+        val=uint8_t(tslib_atol(&valueStr[5]));
+        runProc_prnCmdSeq[runProc_pointPrnCmd]=20;
+        runProc_prnCmdPara[runProc_pointPrnCmd++]=val;
     }
+
     // "prn_papSped" comes with feed-cmd, not with "styl" !!
 
 }
@@ -1619,51 +1635,25 @@ bool T_runProc::subGetVariStr(char *valueStr, char *returnStr)
 
     if ( memcmp(valueStr, "wday eng shor", 13) ==0 )
     {
-        switch (dow)
+        swl_returnWeekdayStr(dow, 2, returnStr);
-        {
-
-        case 1:
-            returnStr[0]='m'; returnStr[1]='o';
-            break;
-        case 2:
-            returnStr[0]='t'; returnStr[1]='u';
-            break;
-        case 3:
-            returnStr[0]='w'; returnStr[1]='e';
-            break;
-        case 4:
-            returnStr[0]='t'; returnStr[1]='h';
-            break;
-        case 5:
-            returnStr[0]='f'; returnStr[1]='r';
-            break;
-        case 6:
-            returnStr[0]='s'; returnStr[1]='a';
-            break;
-        case 7:
-            returnStr[0]='s'; returnStr[1]='u';
-            break;
-        default:
-            returnStr[0]='-'; returnStr[1]='-';
-            break;
-        }
         returnStr[2]=0;
         return true;
     }
     if ( memcmp(valueStr, "wday eng long", 13) ==0 )
     {
-
+        swl_returnWeekdayStr(dow, 2, returnStr);
         return true;
     }
     if ( memcmp(valueStr, "wday deu shor", 13) ==0 )
     {
-
+        swl_returnWeekdayStr(dow, 1, returnStr);
+        returnStr[2]=0;
         return true;
     }
 
     if ( memcmp(valueStr, "wday deu long", 13) ==0 )
     {
-
+        swl_returnWeekdayStr(dow, 1, returnStr);
         return true;
     }
 
@@ -1987,7 +1977,6 @@ void T_runProc::runProc_subPerformPrintCmds(uint8_t nextCmd, uint8_t nextPara)
             prn_fontInv=0;
             sendFDcmd_set(CMD2DC_PRI_SETLETTER, 0, 0, prn_fontBold, prn_fontInv, prn_underLine, 0);
             break;
-
         case 16:
             prn_fontTyp=nextPara;      // kind of font 5...11 (0..22)
             sendFDcmd_set(CMD2DC_PRI_SETFONT, 0,0, prn_fontTyp, prn_fontSiz, prn_width, prn_hei);
@@ -2008,12 +1997,14 @@ void T_runProc::runProc_subPerformPrintCmds(uint8_t nextCmd, uint8_t nextPara)
             prn_density=nextPara;
             prn_sendPrnSetup(prn_papSped, prn_density,  prn_alignment, prn_orient);
             break;
-
+        case 20:
+            prn_fontSiz=nextPara;
+            sendFDcmd_set(CMD2DC_PRI_SETFONT, 0,0, prn_fontTyp, prn_fontSiz, prn_width, prn_hei);
+            break;
         case 30:    // cut
             // kindof = 1: full cut  2: partial cut   3=eject (5xLF + full cut)
             sendFDcmd_set(CMD2DC_PRI_CUT, 0,0, 1,0,0,0);
             break;
-
         case 31:    // part
             // kindof = 1: full cut  2: partial cut   3=eject (5xLF + full cut)
             sendFDcmd_set(CMD2DC_PRI_CUT, 0,0, 2,0,0,0);
@@ -2333,3 +2324,133 @@ char T_runProc::prn_directTicket_cycle(void)
 }
 
 
+
+
+// neuere TS Version, wurde aber von Gerhard nicht verwendet:
+/*
+bool T_runProc::bl_waitForRdyMsg(void)		// vorher:   bl_isUp()
+{
+    uint8_t receivedData[160];
+    uint8_t LL, nn;
+
+    for (nn=0; nn<160; nn++) receivedData[nn]=0;
+    LL=epi_getRawRecLength();
+    if (LL>0)
+    {
+        epi_getRawReceivedData(receivedData);
+
+        // response to "readFWversion"
+        if (receivedData[0]==2 && receivedData[1]==146 && receivedData[2]==45 &&
+            receivedData[3]==45 && receivedData[4] ==95 && receivedData[5]==176)
+        {
+            //qDebug() << "*** runProc, got BL response to readFWversion";
+            //epi_clrRawReceivedString();
+            return true;
+        }
+        // response to "start BL"
+        if (receivedData[0]==2 && receivedData[1]==101 && receivedData[2]==48 &&
+            receivedData[3]==223 && receivedData[4] ==131 )
+        {
+            //qDebug() << "runProc, got BL response to start";
+            //epi_clrRawReceivedString();
+            return true;
+        }
+        //qDebug() << "runProc, got "<<LL<<" wrong bytes"<<receivedData[0]<<" "
+        //    <<receivedData[1]<<" "<<receivedData[2]<<" "<<receivedData[3]<<" "
+         //   <<receivedData[4]<<" "<<receivedData[5]<<" "<<receivedData[6];
+    }
+    return false;
+}
+
+uint8_t T_runProc::bl_isUp(void)
+{
+    // return 1: BL is up   2: BL error  0: unknown
+    return runProc_BLisStarted;
+
+}
+
+
+bool T_runProc::bl_performComplStart(void)
+{
+    bool result;
+
+    static uint8_t retryCtr;
+
+    if ((bl_startupStep<1) || (bl_startupStep>10))
+        return false;
+
+    if (bl_startupStep==1)
+    {
+        dc_autoRequest(false);  // and clear serial input buffer
+        runProc_BLisStarted=0;
+        bl_startupStep++;
+    } else
+
+    if (bl_startupStep==2)
+    {
+        qDebug()<<"rebooting";
+        bl_rebootDC();
+        myTO->stop();
+        myTO->start(500);
+        retryCtr=0;
+        bl_startupStep++;
+    } else
+
+    if (bl_startupStep==3)
+    {
+        if (!myTO->isActive())
+        {
+            qDebug()<<"starting BL";
+            epi_clrRawReceivedString();
+            bl_startBL();
+            myTO->stop();
+            myTO->start(500);
+            bl_startupStep++;
+        }
+    } else
+
+    if (bl_startupStep==4)
+    {
+        if (!myTO->isActive())
+        {
+            qDebug()<<"checking BL";
+            bl_checkBL();
+            myTO->stop();
+            myTO->start(1000);
+            bl_startupStep++;
+        }
+    } else
+
+    if (bl_startupStep==5)
+    {
+        result = bl_waitForRdyMsg();
+        if (result==true)
+        {
+            bl_startupStep++;
+            qDebug()<<"BL is working now...";       //  BL is up and running
+            runProc_BLisStarted=1;      // ok
+            return true;
+        }
+
+        if (!myTO->isActive())
+        {
+            qDebug()<<"no resp. from BL"<< result;
+            retryCtr++;    // start again
+            if (retryCtr>=3)
+            {
+                bl_startupStep=99;
+                qDebug()<<"BL error!!!";
+            } else
+            {
+                bl_startupStep=3;
+                runProc_BLisStarted=2;      // error
+                myTO->stop();
+                myTO->start(1);
+            }
+        }
+
+
+    }
+    return false;
+}
+*/

src/tslib.cpp

@@ -981,3 +981,62 @@ unsigned int tslib_ah2ui( char *AscString)
     return(uitmp);
 
 }
+
+// *****************************************************************************************
+
+void swl_returnWeekdayStr(char dow, char language, char *buf)
+{
+    // dow=1...7
+    // always returns 10byte
+    // languages: 1=german  2=english
+
+    memset(buf,0,10);
+    switch (dow)
+    {
+        case 1: // monday
+                if (language==1) tslib_text2array("Montag", buf,10);
+                else if (language==2) tslib_text2array("Monday", buf,10);
+                break;
+        case 2:
+                if (language==1) tslib_text2array("Dienstag", buf,10);
+                else if (language==2) tslib_text2array("Tuesday", buf,10);
+                break;
+        case 3:
+                if (language==1) tslib_text2array("Mittwoch", buf,10);
+                else if (language==2) tslib_text2array("Wednesday", buf,10);
+                break;
+        case 4:
+                if (language==1) tslib_text2array("Donnerstag", buf,10);
+                else if (language==2) tslib_text2array("Thursday", buf,10);
+                break;
+        case 5:
+                if (language==1) tslib_text2array("Freitag", buf,10);
+                else if (language==2) tslib_text2array("Friday", buf,10);
+                break;
+        case 6:
+                if (language==1) tslib_text2array("Samstag", buf,10);
+                else if (language==2) tslib_text2array("Saturday", buf,10);
+                break;
+        case 7:
+                if (language==1) tslib_text2array("Sonntag", buf,10);
+                else if (language==2) tslib_text2array("Sunday", buf,10);
+                break;
+        default:   tslib_text2array("----", buf,10);
+    }
+
+}
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+