diff --git a/include/sendWRcmd.h b/include/sendWRcmd.h index 7e83be6..2620428 100644 --- a/include/sendWRcmd.h +++ b/include/sendWRcmd.h @@ -1,185 +1,12 @@ #ifndef SENDWRCMDS_DEFS_H #define SENDWRCMDS_DEFS_H + +#include #include "tslib.h" #include -// asynch. Commands -// store OUTPUT commands until time to send -// problem: OUT commands are set if a button is pressed or a transaction event happens -// so it's never synchron with sending grid -// but sending must apply the 100ms time grid as we have to wait for the response before sending the next command!!! - -// aug2023: used with setSendCommand0 -//#define SENDDIRCMD_TestSerial 1 -//#define SENDDIRCMD_MakeReset 2 -//#define SENDDIRCMD_setTime 3 -//#define SENDDIRCMD_setWakeFrequ 4 - -//#define SENDDIRCMD_MOVEUP_LOCK 5 -//#define SENDDIRCMD_MOVEDN_LOCK 6 -//#define SENDDIRCMD_OPENUP_DOOR 7 -//#define SENDDIRCMD_OPENDN_DOOR 8 - - -//#define SENDDIRCMD_LEDILLU 9 -//#define SENDDIRCMD_LEDCOIN 10 -//#define SENDDIRCMD_LEDTICKET 11 -//#define SENDDIRCMD_LEDPAD 12 -//#define SENDDIRCMD_LEDSTART 13 -//#define SENDDIRCMD_LEDINSIDE 14 -//#define SENDDIRCMD_LED_ALL 15 -//#define SENDDIRCMD_FAN 16 -//#define SENDDIRCMD_LAERM 17 -//#define SENDDIRCMD_REL1 18 - -//#define SENDDIRCMD_WAKEPTU 20 -//#define SENDDIRCMD_AUXPWR 21 -//#define SENDDIRCMD_AUXDDR 22 -//#define SENDDIRCMD_AUXOUT 23 - - -//#define SENDDIRCMD_UCONTACT_ON 30 -//#define SENDDIRCMD_PRN2_SWONOFF 31 - -//#define SENDDIRCMD_MIF_SWONOFF 32 -//#define SENDDIRCMD_MIF_ATBCREATE 33 - -//#define SENDDIRCMD_MOD_SWONOFF 40 -//#define SENDDIRCMD_MOD_WAKE 41 -//#define SENDDIRCMD_MDB_POWER 42 -//#define SENDDIRCMD_MDB_WAKE 43 -//#define SENDDIRCMD_CRED_ON 44 -//#define SENDDIRCMD_CRED_WAKE 45 - -//#define SENDDIRCMD_SHUT_MOV 50 -//#define SENDDIRCMD_ESCRO_MOV 51 -//#define SENDDIR_OPENVAULT 52 -//#define SENDDIR_REJMOT_ON 53 -//#define SENDDIR_REJMOT_RUN 54 - -// Level 2 (serial from DC to devices) -//#define SEND_REQU_SERCONF 100 -//#define SEND_REQU_HWversion 101 -//#define SEND_REQU_SWversion 102 -//#define SEND_REQU_CONDITION 103 -//#define SEND_REQU_UID 104 -//#define SEND_REQU_TIME 105 - // includes wake frequency -//#define SEND_REQU_ANALOGS 110 -//#define SEND_REQU_DIG_INPUTS 111 -//#define SEND_REQU_DIG_OUTPUTS 112 - -//#define SEND_REQU_PRN_STATE 120 -//#define SEND_REQU_PRN_FONTS 121 -//#define SEND_REQU_PRN_ALL 122 - -//#define SEND_REQU_MIFSTATE 123 - // Type and state of reader - -//#define SEND_REQU_MIFDATA 124 - // Type, UID, Header of card - // read one card sector - // sectors must be addressed by RD_ADD - -//#define SEND_REQU_MIF_ATB_TYPE 125 - -//#define SEND_REQU_MDB_GETSTAT 126 -//#define SEND_REQU_MDB_GETWAK 127 -//#define SEND_REQU_MDB_GETRESP 128 -//#define SEND_REQU_EMP_GETALL 129 -//#define SEND_REQU_EMP_GETCOIN 130 - - -//#define SENDDIRCMD_DEVICE_PARA 131 -//#define SENDDIRCMD_MACHINE_ID 132 -//#define SEND_REQU_DEVICE_PARA 133 -//#define SEND_REQU_MACINE_ID 134 - - - - - -// TODO: -//#define SENDDIRCMD_PRN_SETUP 72 -//#define SENDDIRCMD_MDB_SNDMSG 92 -//#define SENDDIRCMD_EMP_SETT 93 -//#define SENDDIRCMD_PRN_BC 80 - - - -// further: mdb state, coinchecker state, bill state, modem state, credit_state.... -/* -#define SENDDIRCMD_SHUTOPENBYTIME 60 -#define SENDDIRCMD_SHUTOPENBYCOIN 61 -//#define SENDDIRCMD_SHUT_SENDTIME 62 - -#define SENDDIRCMD_ESCRO_TAKE 63 -#define SENDDIRCMD_ESCRO_GIVE 64 - -#define SENDDIRCMD_PRN_SYS_CMD 70 -#define SENDDIRCMD_PRN_ESC_CMD 71 -#define SENDDIRCMD_PRN_MOVE 73 -#define SENDDIRCMD_PRN_SETFONT 74 -#define SENDDIRCMD_PRN_SETLETT 75 -#define SENDDIRCMD_PRN_CUT 76 -//#define SENDDIRCMD_PRN_TXT // not needed -#define SENDDIRCMD_PRN_LF 78 -#define SENDDIRCMD_PRN_FONTTAB 79 -#define SENDDIRCMD_PRN_QR 81 -#define SENDDIRCMD_PRN_STOREDQR 82 -#define SENDDIRCMD_PRN_LOGO_FL 83 -//#define SENDDIRCMD_PRN_LOGO_GRAF 84 -//#define SENDDIRCMD_PRN_LOGODAT 85 -//#define SENDDIRCMD_PRN_STORBC 86 -#define SENDDIRCMD_PRN_STORQR 87 -#define SENDDIRCMD_PRN_DOC 88 -#define SENDDIRCMD_PRN_CLEARDOC 89 - -//#define SENDDIRCMD_MDB_POWER 42 -//#define SENDDIRCMD_MDB_WAKE 43 -#define SENDDIRCMD_MDB_RES 90 -#define SENDDIRCMD_MDB_SENDCMD 91 -#define SENDDIRCMD_EMP_POLL 94 -#define SENDDIRCMD_EMP_STARPPAY 95 -#define SENDDIRCMD_EMP_STOPPAY 96 -*/ - - - -// obsolete: -/* -#define SENDDIRCMD_PRN1_SENDTEXT 54 -#define SENDDIRCMD_PRN1_SENDCMD 55 -#define SENDDIRCMD_PRN1_SERPAR 56 -#define SENDDIRCMD_PRN_LEVEL2_4B 58 -#define SENDDIRCMD_PRN_LEVEL2_64 59 -*/ - -// highest priority -//#define CMDSTACKDEPTH 16 -// means: up to 16 cmd can be stored. They are issued one by one every 100ms -//void sendWRcmd_clrCmdStack(void); -//bool sendWRcmd_setSendCommand0(uint16_t nextCmd); - // GUI or app sends a command to DC transfered by serial - -//uint16_t sendWRcmd_getSendCommand0(void); - -// lower priority -//#define CMD4STACKDEPTH 8 -//void sendWRcmd_clrCmd4Stack(void); -//bool sendWRcmd_setSendCommand4(uint16_t nextCmd, uint8_t dat1, uint8_t dat2, uint8_t dat3, uint8_t dat4); -//uint16_t sendWRcmd_getSendCommand4(uint8_t *dat1, uint8_t *dat2, uint8_t *dat3, uint8_t *dat4); - -//#define CMD8STACKDEPTH 4 -//void sendWRcmd_clrCmd8Stack(void); -//bool sendWRcmd_setSendCommand8(uint16_t nextCmd, uint8_t dat1, uint8_t dat2, uint16_t dat3, uint32_t dat4); -//uint16_t sendWRcmd_getSendCommand8(uint8_t *dat1, uint8_t *dat2, uint16_t *dat3, uint32_t *dat4); - - - -// lowest priority // wait for resonse before send next! bool sendWRcmd_setSendBlock160(uint8_t leng, uint8_t *buf); uint8_t sendWRcmd_getSendBlock160(uint8_t *leng, uint8_t *buf); @@ -187,47 +14,6 @@ uint8_t sendWRcmd_getSendBlock160(uint8_t *leng, uint8_t *buf); void sendWRcmd_INI(void); - - -//uint8_t epi_store64ByteSendData(uint8_t length, uint8_t *buf); - // HWapi writes data to be forwarded to DC and further to mdb-device - // not batched! don't use twice within 100ms - -//uint8_t gpi_restore64ByteSendData(uint8_t *length, uint8_t *buf); - // datif reads data to forward to dc - - - -// ONE printer doc consists of 20 x 64 byte -//#define MAXNROF_PRNBYTES 64 -//#define MAXNROF_PRNBLOCKS 20 -/* -void epi_resetPrinterStack(void); - -uint8_t epi_storePrnText(char *buf, uint8_t leng); - // store text and binary data from Gui in next higher free memory 0....9 - -uint8_t gpi_restorePrnText(uint8_t *retbuf); - // read printer text and send to slave, size of retbuf== 64 - -uint8_t gpi_chk4remainingText(void); - // retval: 0: no more textline left (to send) >0: nr of lines -*/ - - -//void epi_storeUserOfSendingTextBuffer(uint8_t user, uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4 ); - // user=1: Text-Print is using this buffer - // 2: QR-code-Printer is using this buffer - -//uint8_t gpi_getUserOfSendingTextBuffer(uint8_t *para1, uint8_t *para2, uint8_t *para3, uint8_t *para4); - // user=1: Text-Print is using this buffer - // 2: QR-code-Printer is using this buffer - - - - - - // #define FDCMD_STACKDEPTH 16 / 32 // short and long commands are queued into the same stack to guaranty right order void sendFDcmd_clrStack(void);