UpdatePTUDevCtrl/DCPlugin/include/sendWRcmd.h

218 lines
7.5 KiB
C

#ifndef SENDWRCMDS_DEFS_H
#define SENDWRCMDS_DEFS_H
#include <stdint.h>
#include "tslib.h"
#include <QString>
// asynch. Commands
// store OUTPUT commands until time to send
// problem: OUT commands are set if a button is pressed or a transaction event happens
// so it's never synchron with sending grid
// but sending must apply the 100ms time grid as we have to wait for the response before sending the next command!!!
// Level 0 (DC direct)
#define SENDDIRCMD_TestSerial 1
#define SENDDIRCMD_MakeReset 2
#define SENDDIRCMD_setTime 3
#define SENDDIRCMD_setWakeFrequ 4
// Level 1 (DC DO's switching connected parts)
#define SENDDIRCMD_MOVEUP_LOCK 5
#define SENDDIRCMD_MOVEDN_LOCK 6
#define SENDDIRCMD_OPENUP_DOOR 7
#define SENDDIRCMD_OPENDN_DOOR 8
#define SENDDIRCMD_LEDILLU 9
#define SENDDIRCMD_LEDCOIN 10
#define SENDDIRCMD_LEDTICKET 11
#define SENDDIRCMD_LEDPAD 12
#define SENDDIRCMD_LEDSTART 13
#define SENDDIRCMD_LEDINSIDE 14
//#define SENDDIRCMD_LED_ALL 15
#define SENDDIRCMD_FAN 16
#define SENDDIRCMD_LAERM 17
#define SENDDIRCMD_REL1 18
#define SENDDIRCMD_WAKEPTU 20
#define SENDDIRCMD_AUXPWR 21
#define SENDDIRCMD_AUXDDR 22
#define SENDDIRCMD_AUXOUT 23
#define SENDDIRCMD_UCONTACT_ON 30
#define SENDDIRCMD_PRN2_SWONOFF 31
#define SENDDIRCMD_MIF_SWONOFF 32 // 0x2900
#define SENDDIRCMD_MIF_ATBCREATE 33 // 0x2907
#define SENDDIRCMD_MOD_SWONOFF 40
#define SENDDIRCMD_MOD_WAKE 41
#define SENDDIRCMD_MDB_POWER 42
#define SENDDIRCMD_MDB_WAKE 43
#define SENDDIRCMD_CRED_ON 44
#define SENDDIRCMD_CRED_WAKE 45
#define SENDDIRCMD_SHUT_MOV 50
#define SENDDIRCMD_ESCRO_MOV 51
#define SENDDIR_OPENVAULT 52
#define SENDDIR_REJMOT_ON 53
#define SENDDIR_REJMOT_RUN 54
// Level 2 (serial from DC to devices)
#define SEND_REQU_SERCONF 100
#define SEND_REQU_HWversion 101
#define SEND_REQU_SWversion 102
#define SEND_REQU_CONDITION 103
#define SEND_REQU_UID 104
#define SEND_REQU_TIME 105
// includes wake frequency
#define SEND_REQU_ANALOGS 110
#define SEND_REQU_DIG_INPUTS 111
#define SEND_REQU_DIG_OUTPUTS 112
#define SEND_REQU_PRN_STATE 120
#define SEND_REQU_PRN_FONTS 121
#define SEND_REQU_PRN_ALL 122
#define SEND_REQU_MIFSTATE 123
// Type and state of reader
#define SEND_REQU_MIFDATA 124
// Type, UID, Header of card
// read one card sector
// sectors must be addressed by RD_ADD
#define SEND_REQU_MIF_ATB_TYPE 125
#define SEND_REQU_MDB_GETSTAT 126
//#define SEND_REQU_MDB_GETWAK 127
#define SEND_REQU_MDB_GETRESP 128
#define SEND_REQU_EMP_GETALL 129
#define SEND_REQU_EMP_GETCOIN 130
#define SENDDIRCMD_DEVICE_PARA 131
#define SENDDIRCMD_MACHINE_ID 132
#define SEND_REQU_DEVICE_PARA 133
#define SEND_REQU_MACINE_ID 134
// further: mdb state, coinchecker state, bill state, modem state, credit_state....
#define SENDDIRCMD_SHUTOPENBYTIME 60
#define SENDDIRCMD_SHUTOPENBYCOIN 61
//#define SENDDIRCMD_SHUT_SENDTIME 62
#define SENDDIRCMD_ESCRO_TAKE 63
#define SENDDIRCMD_ESCRO_GIVE 64
#define SENDDIRCMD_PRN_SYS_CMD 70
#define SENDDIRCMD_PRN_ESC_CMD 71
#define SENDDIRCMD_PRN_SETUP 72
#define SENDDIRCMD_PRN_MOVE 73
#define SENDDIRCMD_PRN_SETFONT 74
#define SENDDIRCMD_PRN_SETLETT 75
#define SENDDIRCMD_PRN_CUT 76
//#define SENDDIRCMD_PRN_TXT // not needed
#define SENDDIRCMD_PRN_LF 78
#define SENDDIRCMD_PRN_FONTTAB 79
#define SENDDIRCMD_PRN_BC 80
#define SENDDIRCMD_PRN_QR 81
#define SENDDIRCMD_PRN_STOREDQR 82
#define SENDDIRCMD_PRN_LOGO_FL 83
//#define SENDDIRCMD_PRN_LOGO_GRAF 84
//#define SENDDIRCMD_PRN_LOGODAT 85
//#define SENDDIRCMD_PRN_STORBC 86
#define SENDDIRCMD_PRN_STORQR 87
#define SENDDIRCMD_PRN_DOC 88
#define SENDDIRCMD_PRN_CLEARDOC 89
//#define SENDDIRCMD_MDB_POWER 42
//#define SENDDIRCMD_MDB_WAKE 43
#define SENDDIRCMD_MDB_RES 90
#define SENDDIRCMD_MDB_SENDCMD 91
#define SENDDIRCMD_MDB_SNDMSG 92
#define SENDDIRCMD_EMP_SETT 93
#define SENDDIRCMD_EMP_POLL 94
#define SENDDIRCMD_EMP_STARPPAY 95
#define SENDDIRCMD_EMP_STOPPAY 96
// obsolete:
#define SENDDIRCMD_PRN1_SENDTEXT 54
#define SENDDIRCMD_PRN1_SENDCMD 55
#define SENDDIRCMD_PRN1_SERPAR 56
#define SENDDIRCMD_PRN_LEVEL2_4B 58
#define SENDDIRCMD_PRN_LEVEL2_64 59
// highest priority
#define CMDSTACKDEPTH 16
// means: up to 16 cmd can be stored. They are issued one by one every 100ms
void sendWRcmd_clrCmdStack(void);
bool sendWRcmd_setSendCommand0(uint16_t nextCmd);
// GUI or app sends a command to DC transfered by serial
uint16_t sendWRcmd_getSendCommand0(void);
// lower priority
#define CMD4STACKDEPTH 8
void sendWRcmd_clrCmd4Stack(void);
bool sendWRcmd_setSendCommand4(uint16_t nextCmd, uint8_t dat1, uint8_t dat2, uint8_t dat3, uint8_t dat4);
uint16_t sendWRcmd_getSendCommand4(uint8_t *dat1, uint8_t *dat2, uint8_t *dat3, uint8_t *dat4);
#define CMD8STACKDEPTH 4
void sendWRcmd_clrCmd8Stack(void);
bool sendWRcmd_setSendCommand8(uint16_t nextCmd, uint8_t dat1, uint8_t dat2, uint16_t dat3, uint32_t dat4);
uint16_t sendWRcmd_getSendCommand8(uint8_t *dat1, uint8_t *dat2, uint16_t *dat3, uint32_t *dat4);
// lowest priority
// wait for resonse before send next!
bool sendWRcmd_setSendBlock160(uint8_t leng, uint8_t *buf);
uint8_t sendWRcmd_getSendBlock160(uint8_t *leng, uint8_t *buf);
// retval = *leng
void sendWRcmd_INI(void);
uint8_t epi_store64ByteSendData(uint8_t length, uint8_t *buf);
// HWapi writes data to be forwarded to DC and further to mdb-device
// not batched! don't use twice within 100ms
uint8_t gpi_restore64ByteSendData(uint8_t *length, uint8_t *buf);
// datif reads data to forward to dc
// ONE printer doc consists of 20 x 64 byte
#define MAXNROF_PRNBYTES 64
#define MAXNROF_PRNBLOCKS 20
void epi_resetPrinterStack(void);
uint8_t epi_storePrnText(char *buf, uint8_t leng);
// store text and binary data from Gui in next higher free memory 0....9
uint8_t gpi_restorePrnText(uint8_t *retbuf);
// read printer text and send to slave, size of retbuf== 64
uint8_t gpi_chk4remainingText(void);
// retval: 0: no more textline left (to send) >0: nr of lines
void epi_storeUserOfSendingTextBuffer(uint8_t user, uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4 );
// user=1: Text-Print is using this buffer
// 2: QR-code-Printer is using this buffer
uint8_t gpi_getUserOfSendingTextBuffer(uint8_t *para1, uint8_t *para2, uint8_t *para3, uint8_t *para4);
// user=1: Text-Print is using this buffer
// 2: QR-code-Printer is using this buffer
#endif