UpdatePTUDevCtrl/include/interfaces.h
Gerhard Hoffmann 8b301a91dc Squashed 'DCPlugin/' changes from 3e3e1ef..652ad9b
652ad9b Included changes of TS for version 3.5.
c85b090 Added ulong2uchar (version 3.5).
87a6ed0 Include changes of Thomas for version 3.5.
99c88c7 Included changes of Thomas for version 3.5. prn_getPrintResult(),
712ea0f Included changes of Thomas for version 3.5 of library: datif_templatePrintFinished_OK(), datif_templatePrintFinished_Err(), datif_gotNewCoin().
86311de Add use of shared memory. Add changes for version 3.4. of library.
cb44127 Added check4freeFDshortCmd.
a95e174 Included some changes of Thomas.
c724b5b Shift several device controller related variables to shared memory.
ef79321 Massive change: using shared memory containing most device controller realted variables.
a7aa75a Massive change: using shared memory containing devcie controller variables.
dc00c69 Added check4freeFDlongCmd.
eeb3519 Adding shared memory containing all variables necessary to check device controller related variables.
30338e2 Changed struct T_moduleCondition. Changed struct T_dynamicCondition. Added struct T_extTime. Added log_chkIfVaultRecordAvailable(). Added sys_getDeviceConditions(). set version to 3.4.
58fdea4 Added m_sharedMem. Added cash_getAmountInVault. Added cash_getNrCoinsInVault. Added sys_getDynMachineConditions() with new interface. Added sys_getDeviceConditions() with new interface. Added log_chkIfVaultRecordAvailable().
df760f1 Added shared_mem_buffer.h/.cpp.

git-subtree-dir: DCPlugin
git-subtree-split: 652ad9b43d24bddbc3c2636c4ff4b5d74e081e46
2023-04-18 13:43:37 +02:00

1642 lines
65 KiB
C++
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#ifndef INTERFACE_H
#define INTERFACE_H
#include <QtPlugin>
struct T_emp
{
// Fixdata from EMP:
uint8_t shaft; // = changer level
uint16_t countryCode;
uint8_t scale;
uint8_t decimals;
uint8_t coinValues[16];
uint16_t routing;
// Master specs:
uint8_t gotSetup; // 1: got specifications from master 0: no specs
uint16_t coinAccept; // bit 0 = coin1 bit H=accept
uint8_t tokenChannel;
uint16_t denomination[16];
// dynamic:
uint8_t state; // step counter of EMP (electronic coin checker) FSM (finite state machine):
// 0=Emp & Bus power off, 1=powered, poll off 2=polling on
// 3=device responded, requesting status
// 4=waiting for status 5=have status,
// 6: IDLE, have paramters from master, polling running, ready for payment
// Master can stop/start polling and acceptance
// 7: end of transaction, polling on, accept off, reporting coins, (wait for last coin)
// 8: transaction running, polling on, acceptance on, reporting coins,
uint8_t pollingRunning;
uint8_t paymentRunning;
};
struct Trtc_DateTime
{
uint8_t rtc_hour;
uint8_t rtc_min;
uint8_t rtc_sec;
uint8_t rtc_dayOfMonth;
uint8_t rtc_month;
uint8_t rtc_year;
uint8_t rtc_dayOfWeek;
};
struct Tprn_hw_state
{
// hardware (IO's)
bool powerRdBk; // prn pwr is on
bool rsSwOk; // serial switch (printer or modem) is set to printer
bool rsDrvOk; // RS232 converter for PTU, Printer and Modem in on
bool ReadyLine; // HW signal from printer showing ready
bool inIdle; // powered and free from errors
bool paperNearEnd; // paper roll runs out
bool noPaper;
bool ErrorTemp;
bool HeadOpen;
bool cutterJam;
bool noResponse; // printer is not connected, cable broken, wrong baudrate
bool badResponse;
};
struct Tprn_currentSettings
{
uint8_t currFont;
uint8_t currSize;
uint8_t currHeigth;
uint8_t currWidth;
bool nowBold;
bool nowInvers;
bool nowUnderlined;
uint8_t currDensity;
uint8_t currSpeed;
bool nowAligned;
};
struct T_dynDat
{
uint8_t licensePlate[8];
uint8_t vendingPrice[8];
uint8_t parkingEnd[8];
uint8_t currentTime[8];
uint8_t currentDate[8];
uint8_t dynDat5[8];
uint8_t dynDat6[8];
uint8_t dynDat7[8];
};
struct T_vaultRecord
{
// Kassenbeleg (Abrechnungsdatensatz = Kassenwechsel-Datensatz)
char startbuffer[4]; // Psa> // never move or change this 1st entry
uint16_t AccountingNumber;
uint16_t CUNU;
uint16_t MANU;
uint16_t resint1;
//uint16_t resint2;
char label1buffer[4]; // tim>
uint8_t year;
uint8_t month;
uint8_t dom;
uint8_t hour;
uint8_t min;
uint8_t sec;
uint8_t DoW;
uint8_t reschar3;
char label2buffer[4]; // abs>
uint32_t AbsIncome1;
uint32_t AbsReserve;
uint32_t AbsNrOfCuts;
//16
char label3buffer[4]; // mw >
// Verkauf, Tür zu:
uint32_t VKcoinsInserted[16]; // nur für Wechsler, soviel wurde eingeworfen
uint32_t VKcoinsReturned[6]; // nur für Wechsler, Anzahl Münzen pro Typ, soviel wurde zurückgegeben
//88
// Service, Tür offen:
uint16_t ServCoinsInserted[16]; // nur für Wechsler, soviel wurde eingeworfen
uint16_t ServCoinsReturned[6]; // nur für Wechsler, Anzahl Münzen pro Typ, soviel wurde zurückgegeben
uint16_t resint3;
uint16_t resint4;
uint16_t currentTubeContent[6]; // nur für Wechsler, aktueller Füllstand
uint16_t resint5;
uint16_t resint6;
// 56
char label4buffer[4]; // box>
uint16_t coinsInVault[16];
uint16_t billsInStacker[8];
// 48
char label5buffer[4]; // val>
// actually constant unless exchange rate is changed
uint16_t coinDenomination[16]; // 5..50000 (z.B. 2? sind in Ungarn 760Ft)
uint16_t billDenom[8];
uint16_t tubeDenom[6];
uint16_t exchangeRate;
uint16_t resint9;
// 64
char endofblock[4]; // end>
// 316 byte Block im Speicher
};
struct T_moduleCondition
{
// store conditon of all system components, hold in RAM
// 0 means unknown, not yet tested/used
// 1 means OK
// 50..99 = HINT / Notification
// 100..150 = WARNING
// 200..250 = ERROR
uint8_t ram;
uint8_t intEe;
uint8_t extEe;
uint8_t rtc; // 1: time/date OK 100: time not plausible 200: hardware error
uint8_t boardHw;
uint8_t printer;
uint8_t modem;
uint8_t signal; // 1...99
uint8_t regist; // 100:not 1:reg 2:ping OK 3:gotTime
uint8_t mdbBus;
uint8_t coinChecker; // EMP, OMP or mei-cashflow
uint8_t coinEscrow;
uint8_t mifareReader;
uint8_t creditTerm;
uint8_t coinReject;
uint8_t coinSafe;
uint8_t billSafe;
uint8_t voltage; // 1:11..14V
uint8_t temper;
uint8_t poweronTest;
uint8_t doorState; // 1: alles zu 200: t?r offen + bit1(S) +bit2(CB) + bit3(CB)
uint8_t doorWasOpened; // 1: all doors are closed 200: any door was just opened
uint8_t changer; // can only be tested by usage
uint8_t coinBlocker; // can only be tested by usage
uint8_t billReader; // can only be tested by usage
uint8_t ResetReason;
uint8_t allModulesChecked;
uint8_t alarmState;
uint8_t res11;
uint8_t res12;
uint8_t res13;
};
struct T_dynamicCondition
{
char allDoorsDebounced;
char openedAuthorized;
uint8_t CBinDebounced;
char upperDoor; // 0:fehlt 1:drin
char middleDoor;
char lowerDoor;
char coinBox;
char billBox;
char modeAbrech;
char onAlarm;
char nowCardTest;
char nowPayment;
char lastMifCardType;
uint8_t lastSDoorState;
uint8_t lastVDoorState;
uint8_t lastCBstate;
char paymentInProgress;
char res1;
uint16_t U_Batt;
uint16_t Temperatur;
uint16_t nrCoinsInBox;
uint32_t amountInBox;
uint32_t totalTransVolume;
uint32_t totalNrOfVends;
char jsonValid_config;
char jsonValid_device;
char jsonValid_cash;
char jsonValid_print;
char jsonValid_serial;
char jsonValid_time;
char lastFileType;
// 44
uint8_t MifCardHolder[8];
uint8_t resultOfLastTemplPrint;
// 0: unknown or printing in progress
// 1: OK, doc was printed 2: error, doc was not printed
uint8_t lastPrinterStatus;
// 0: printer OK
// bit0: near paper end bit1: no paper
// bit2: temperature error bit3: error head open
// bit4: paper jam in cutter
// bit6: no response bit7: serial rec. error
// bit5: printer not ready
//54
};
struct T_extTime
{
uint8_t Hours;
uint8_t Min;
uint8_t Sec;
uint8_t Year;
uint8_t Month;
uint8_t Day;
uint8_t DOW;
uint8_t res1;
uint16_t MinOfDay;
uint16_t res2;
uint32_t SecOfDay;
uint8_t isLeapYear;
uint8_t nxtLeapYear;
uint8_t lastLeapYear;
uint8_t hoursOfThisWeek;
uint16_t minutesOfThisWeek;
uint16_t hoursOfThisMonth;
uint16_t daysOfThisYear;
uint16_t GetHoursOfYear;
uint16_t res3;
uint32_t GetMinutesOfYear;
uint8_t getWakeIntvSec;
uint8_t res4;
uint16_t res5;
uint32_t MinutesOfMillenium;
};
class hwinf
{
public:
enum class DownloadResult {OK, ERROR, TIMEOUT, NOP};
enum class FileTypeJson {CONFIG=1, DEVICE, CASH, SERIAL, TIME, PRINTER};
virtual ~hwinf() {}
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// Use serial interface and protocol stack in Cashagent-Library
// Sending Output data to DeviceController DC2b
// Sending input requests to DC2 (single or auto-batch)
// Getting input data as receiver payload
// Furthermore the Cashagent-Library answers with status strings about sending and reading result
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual bool dc_openSerial(int BaudNr, QString BaudStr, QString ComName, uint8_t connect) const = 0;
// Command: open serial interface
// BaudNr: 0:1200 1:9600 2:19200 3:38400 4:57600 5:115200
// BaudStr: for exapmle "19200"
// ComName: for example "COM48"
// connect: 0, 1
virtual bool dc_closeSerial(void) const = 0;
// Command: close serial interface in order to save power while power down
// or if another port must be used
virtual bool dc_isPortOpen(void) const =0;
// returns true if port open (don't send unless open. Sending to closed port will crash program)
virtual uint8_t test_serialState(void) const =0;
// test on-board signals for the serials
// serial drv on/off, Serial mux1, Serial mux2
virtual bool test_serialIsOn(void) const =0;
virtual bool dc_updateDC(QString binFileName,
QString baudrate,
QString comPort) const = 0;
// download binary file down into device controller
virtual bool dc_updatePrinterTemplate(enum FileTypeJson type,
QVector<int> templateIdx,
QVector<QString> fnames,
QString br,
QString serial = QString()) const = 0;
virtual bool dc_printTemplate(enum FileTypeJson type,
QVector<int> templateIdx,
QString br,
QString serial = QString()) const = 0;
virtual void dc_autoRequest(bool on) const =0;
// on = true: select that all READ-Requests are sent automatically
// on = false: select that all READ-Requests are sent manually one by one
// Every input information from DC2 must be requested
// ( digital and analog sensors, get time/date, get status information )
virtual uint8_t dc_isRequestDone(void) const =0;
// retval: 0: request is still in progress
// 1: answer from DC2 was OK
// 2: wrong answer from DC2
virtual uint16_t dc_getCompletePayLoad(uint16_t plBufSiz, uint8_t *payLoad) const =0;
// get data back in "payLoad", max 64 byte, can be used for diagnosis
// retval = nr of bytes received. If host buffer too small then
// only plBufSiz bytes are copied to "payLoad"
// plBufSiz­z=size of host buffer
virtual void dc_requTestResponse() const =0;
// tell DC2 to send a test-string, useful to see if cable and baudrate is OK
virtual bool dc_readAnswTestResponse() const =0;
// retval: true: test was successful, got right response
virtual uint8_t getRawRecLength(void) const =0;
// only needed if protocol stack in Cashagent-Library is bypassed
virtual uint8_t getRawReceivedData(uint8_t *receivedData) const =0;
// only needed if protocol stack in Cashagent-Library is bypassed
virtual QString dc_getSerialState(void) const =0;
// get result of opening-command like "ttyS0 opened with 115200 8N1!
// or error messages like "comport not available..."
// was saved by last opening event, can be passed for 100ms
virtual void dc_clrSerialStateText(void) const =0;
// clear above text to avoid multiple repetive displaying
virtual QString dc_getTxt4HsStateLine(void) const =0;
// return string with status of handshakes
virtual void dc_clrTxt4HsStateLine(void) const =0;
// clear above text to avoid multiple repetive displaying
virtual QString dc_getTxt4masterStateLine(void) const =0;
// returns string telling if the received packet is valid and complies protocol
// if OK: "slave response OK" in case of error: "wrong length received", "wrong start sign received",
// "received datalen to big", "wrong data len received", "wrong crc received"
virtual void dc_clrTxt4masterStateLine(void) const =0;
// clear above text to avoid multiple repetive displaying
virtual QString dc_getTxt4resultStateLine(void) const =0;
// returns string telling response of DC. First question: did DC get a correct request telegram?
// and if: 2nd question did DC perform the contained output and input commands
// if OK: "Slave OUT and IN Result: 0 0"
// in case of error: "slave got wrong start sign" ..length" ...crc" ... address"
// slave does not perform and command!
// 2nd) received telegram was OK, DC tried to perform the master commands. result
// result of writing data (e.g switching leds and motors, sending stuff to printer...)
// OUT = 0: OK 1: unknown command 2: operation not possible
// result of reading data (e.g. switches, voltages, accepted coins, printer status....)
// IN = 0: OK 1: unknown command 2: could not read due to hardware error 3: could not read because device is off
virtual void dc_clrTxt4resultStateLine(void) const =0;
// clear above text to avoid multiple repetive displaying
virtual QString dc_getdataStateLine(void) const =0;
// check if recveied input data are ok/valid
// OK-string : "valid INdata...." with protocol details
// not OK: string empty
virtual void dc_clrTxt4dataStateLine(void) const =0;
// clear above text to avoid multiple repetive displaying
virtual QString dc_getdatifLine(void) const =0;
// returns string with result of function dc_requTestResponse()
// "correct" or "false"
virtual void dc_clrTxt4datifLine(void) const =0;
// clear above text to avoid multiple repetive displaying
virtual QString dc_getTxt4RsDiagWin(void) const =0;
// returns string to be displayed in "serial traffic" window
// details about sent and received protocol
virtual void dc_clrTxt4RsDiagWin(void) const =0;
// clear above text to avoid multiple repetive displaying
virtual QString dc_get2ndTxt4RsDiagWin(void) const =0;
// returns string to be displayed in "serial traffic" window
// details about sent and received protocol
virtual void dc_clr2ndTxt4RsDiagWin(void) const =0;
// clear above text to avoid multiple repetive displaying
// 28 functions
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// DC2b internal data
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual QString dc_getSerialParams(void) const =0;
// get DC2 serial settings (not very meaningful as they will not come if different from master settings)
virtual QString dc_getHWversion(void) const =0;
// get DC2 hardware version
virtual QString dc_getSWversion(void) const =0;
// get DC2 software version
virtual QString dc_getState(void) const =0;
// get DC2 status (every OK or any error/warning? )
// UID - unique number, different in every DC
virtual void dc_getUID8byte(uint8_t *buf8byteUid) const =0;
// get 8 single bytes in buffer
virtual QString dc_getUIDstr() const =0;
// get as string
virtual uint64_t dc_getUIDnumber(void) const =0;
// get UID as one long number
// Analog values:
virtual uint32_t dc_getTemperature(void) const =0;
// in Sax-Format 0...400 (0=-50,0°C 100=0,0°C 141=20,5°C 400=150,0°C)
virtual QString dc_getTemperaturStr(void) const =0;
// as string like "-12,5°C"
virtual uint32_t dc_getVoltage(void) const =0;
// as value in mV, 0...65,535V
virtual QString dc_getVoltagStr(void) const =0;
// as string in mV
virtual bool dc_mainFuseIsOk(void) const=0;
// true if 12V fuse is OK
// false: fuse blown, DC will continue working but no 12V device can be used!
virtual void dc_setWakeFrequency(uint8_t period) const =0;
// RTC wakes DC2 (and PTU) by hardware signal every 32seconds
// change wake signal period to 1...64s
virtual void dc_OrderToReset(void) const =0;
// want DC2 to reset (in order to start Bootloader)
// all read-requests can be sent manually by the following functions
// or automatically in background by: void hwapi::dc_autoRequest(bool on)
// in other words:
// if automatic-reading is on, then there's no need to send any of these commands,
// but it's allowed to send them in order to speed up the refreshing of the inputs
virtual void request_DC2serialConfig() const =0;
// read-request can be sent manually by this function, not needed if auto-request is on
virtual void request_DC2_HWversion() const =0;
// read-request can be sent manually by this function, not needed if auto-request is on
virtual void request_DC2_SWversion() const =0;
// read-request can be sent manually by this function, not needed if auto-request is on
virtual void request_DC2_condition() const =0;
// read-request can be sent manually by this function, not needed if auto-request is on
virtual void request_DC2_UID() const =0;
// read-request can be sent manually by this function, not needed if auto-request is on
virtual void request_DC2_analogues() const =0;
// read-request can be sent manually by this function, not needed if auto-request is on
virtual void request_DC2_digitalInputs() const =0;
// read-request can be sent manually by this function, not needed if auto-request is on
virtual void request_DC2_digitalOutputs() const =0;
// read-request can be sent manually by this function, not needed if auto-request is on
// 22
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// using DC2 Bootloader
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void bl_sendDataDirectly(uint8_t length, uint8_t *buf) const =0;
// send without protocol frame, needed for the DC bootloader
virtual void bl_iniChain(void) const =0;
virtual bool bl_importBinFile(QByteArray readBinFile, uint32_t fileSize, char withDispl) const =0;
virtual uint8_t bl_activatBootloader(uint8_t *sendData) const =0;
virtual uint8_t bl_startChain(void) const =0;
virtual uint8_t bl_readBLversion(uint8_t *sendData) const =0;
// minimum size of sendData-buffer: 5byte retval: length
virtual uint8_t bl_readFWversion(uint8_t *sendData) const =0;
// minimum size of sendData-buffer: 5byte retval: length
virtual uint8_t bl_prepareDC_BLcmd(uint8_t Cmd, uint8_t SendDataLength, uint8_t *sendData, uint8_t *outBuf) const =0;
// make BL protocol, retval = outbuf length (5...133)
// bring data in correct form: start always with 0x02 finish with 0x03 and append checksum
// 0x02 Cmd < ...sendData ..> CRC CRC 0x03
// Data length = 0...64
// special conversion: if data contain 2 or 3 (STX, ETX) then write two bytes: 0x1B (=ESC) and data|0x80
// so maxlength = 5 + 2 x 64 (if all data are 2 or 3) without 2,3: maxlength = 5 + 64
virtual uint8_t bl_exitBL(uint8_t *sendData) const =0;
// minimum size of sendData-buffer: 5byte retval: length
// 9
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// get Time and Date from DC2b (contains a buffered real time clock) valid for about three days without power
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual uint8_t rtc_getDateTime(struct Trtc_DateTime *rtc_DateTime) const =0;
virtual uint8_t rtc_setDateTime(void) const =0;
// synch DC2 with PC or PTU system time and date
virtual void rtc_getTime(uint8_t *hh, uint8_t *mm, uint8_t *ss) const =0;
// get time directly
virtual void rtc_getDate(uint8_t *yy, uint8_t *mm, uint8_t *dd) const =0;
// get date directly
virtual uint8_t rtc_getToday(uint8_t *dow, uint16_t *minOfToday, uint32_t *secOfToday) const =0;
// dow=day of week, 1=monday...7
// minOfToday: 0=midnight...1439= 23:59
// secOfToday: 0=midnight...86399= 23:59:59
virtual bool rtc_isLeapYear(uint8_t *lastLeapYear, uint8_t *NextLeapYear) const =0;
// retval true: this year is leap year
virtual bool rtc_isLeapYear() const =0;
virtual void rtc_getWeek(uint8_t *DayOfWeek, uint8_t *HoursOfWeek, uint16_t *MinutesOfWeek) const =0;
// DayOfWeek: 1=monday...7
// HoursOfWeek: 0=Monday 0:00 o'clock...167=Sunday 23:00
// MinutesOfWeek: 0=Monday 0:00 o'clock...10079=Sunday 23:59
virtual void rtc_getMonth(uint8_t *DayOfMonth, uint16_t *HoursOfMonth, uint16_t *MinutesOfMonth) const =0;
// DayOfMonth: 1...31
// HoursOfMonth: 0 = 0:00o'clock of 1.day in month up to 743
// MinutesOfMonth:0 = 0:00o'clock of 1.day in month up to 44639
virtual void rtc_getYear(uint16_t *DayOfYear, uint16_t *HoursOfYear, uint32_t *MinutesOfYear) const =0;
// DayOfYear: 1...366 1= 1.Jan of this current year
// HoursOfYear: 0=1.Jan 0:00o'clock ...8783=31.12 23 o'clock
// MinutesOfYear: 0=1.Jan 0:00o'clock ...527039=31.12 23:59 o'clock
virtual QString rtc_getTimStr(void) const =0;
virtual QString rtc_getDatStr(void) const =0;
virtual QString rtc_getTimDatStr(void) const =0;
virtual void request_DC2_TimeAndDate() const =0;
// read-request can be sent manually by this function, not needed if auto-request is on
// 14
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// PTU, Master
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void ptu_switchWake(bool WAKEACTIVE) const =0;
virtual bool ptu_WakeINisActive(void) const =0;
virtual bool ptu_WakeOutIsOn(void) const =0;
virtual void sendDeviceSettings(uint8_t kindOfPrinter, uint8_t kindOfCoinChecker,
uint8_t kindOfMifareReader, uint8_t suppressSleep,
uint8_t kindOfModem, uint8_t kindOfCredit ) const =0;
// enable hardware in device controller:
// kindOfPrinter: 0:off 1: GPT4672 (only this one implemented)
// kindOfCoinChecker: 0:off 1:EMP820 2:EMP900 3: C²_changer
// kindOfMifareReader: 0:off 1: SL025 (only this one implemented)
// suppressSleep: 0:sleep allowed 1: sleep surpressed for special reason
// kindOfModem: 0:off 1: ATB_Sunlink_LTE (not yet implemented)
// kindOfCredit: 0:off 1: cVendTopp 2:cVendPin (not yet implemented)
virtual void request_ReadbackDeviceSettings() const =0;
virtual void readback_DeviceSettings(uint8_t *length, uint8_t *data) const =0;
/*
buf66[0]=devPara.kindOfPrinter;
buf66[1]=devPara.kindOfCoinChecker;
buf66[2]=devPara.kindOfMifareReader;
buf66[3]=devPara.suppressSleepMode;
buf66[4]=devPara.kindOfModem;
buf66[5]=devPara.kindOfCreditcard;
buf66[6]=devPara.CoinEscrow;
buf66[7]=devPara.CoinRejectUnit;
buf66[8]=devPara.CoinShutter;
buf66[9]=devPara.BillAcceptor;
buf66[10]=devPara.usevaultLock;
buf66[11]=devPara.autoAlarm;
buf66[12]=devPara.autoOpen;
buf66[13]=devPara.printAccReceipt;
buf66[14]=devPara.printDoorReceipt;
buf66[15]=devPara.printTokenTicket;
uitmp=devPara.VaultFullWarnLevel;
buf66[16]=swl_getOneByteFromUint(uitmp, GETLOWBYT);
buf66[17]=swl_getOneByteFromUint(uitmp, GETHIGHBYT);
uitmp=devPara.VaultFullErrorLevel;
buf66[18]=swl_getOneByteFromUint(uitmp, GETLOWBYT);
buf66[19]=swl_getOneByteFromUint(uitmp, GETHIGHBYT);
*/
virtual void sendMachineID(uint16_t customerNr, uint16_t machineNr,
uint16_t borough, uint16_t zone,
uint16_t alias, char *location) const =0;
virtual void request_ReadbackMachineID() const =0;
virtual void readback_machineIDdata(uint8_t *length, uint8_t *data) const =0;
// state 5.5.21: byte[0,1]=customer number byte[2,3]=machine number
// byte[4,5]=borough byte[6,7]=zone byte[8,9]=alias name
// byte[10...41]=location
// 12.4.23TS still the same
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// Printer
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void prn_switchPower(bool on) const =0;
virtual bool prn_isPrinterPowerOn(void) const =0;
virtual uint8_t prn_PrnFuseIsOk(void) const=0;
//retval: 0: fuse blown 1: fuse OK 2:unknown as printer power is off
virtual bool prn_readyINisActive(void) const =0;
virtual uint8_t cash_getLowPaperSensor(void) const=0;
// 0: Sensor sees paper 1: no paper 99: off
// the following device state requests are deployed only if device is powered up:
virtual void request_PrinterHwState() const =0;
virtual void request_PrinterCurrentFonts() const =0;
virtual void request_PrinterStateComplete() const =0;
virtual bool test_serialMux1isSetToPrinter(void) const =0;
// read printer condition and settings
virtual uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const =0;
// retval: status byte
// byte 0 = 0: prnter OK, >0: error
// bit0: paper low 1: no paper 2: temperature error
// 3: head open 4: paper jam in cutter
// 6: no response 7: bad response from printer
// and return struct "Tprn_hw_state"
virtual bool prn_isUpAndReady(void) const =0;
// true: printer is powered, serial is ok, no error, printer is connected and resonding
virtual void prn_getCurrentFontSetting(struct Tprn_currentSettings *prn_fonts) const =0;
// send Commands to printer:
virtual void prn_sendText(QByteArray *buf) const =0;
// up to 1280 bytes
virtual void prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3) const =0;
// send three byte through to printer, see printers manual
virtual void prn_sendPrnEscCmd(uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4) const =0;
// send four byte through to printer, see printers manual
virtual void prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density, uint8_t alignment, uint8_t orientation) const =0;
// send 5 byte: byte 0,1: speed 5...250 mm/s
// byte2: density 0....(25)....50
// byte3: alignment 'l', 'c', 'r' = left, center, right
// byte4: orientation 0, 90, 180 = 0°, 90°, 180° rotation (by now not supported!)
// not batched! don't use twice within 100ms
virtual void prn_movePaper(uint8_t wayInMm, uint8_t direction) const =0;
//direction: 1=forward 2=backward
//
virtual void prn_setFonts(uint8_t font, uint8_t size, uint8_t width, uint8_t height) const =0;
// font = kind of font 5...11 (0..22)
// size = 6...20, 9..9: too tiny 10: small ...12 = normal size ...20=huge
// width: 0...4 0=1x 1=2x 2=4x (huge!) 3=8x 4=16x (3,4 make no sense)
// heigth: 0...7 = 1x...8x only 0,1,2,(3) make sense
virtual void prn_setLetters(uint8_t bold, uint8_t invers, uint8_t underlined) const =0;
// bold: 0/1
// invers: 0/1
// underlined: 0/1
virtual void prn_cut(uint8_t kindof) const =0;
// kindof: 1=full cut 2=partial cut 3=eject (5xLF + full cut)
virtual void prn_newLine(uint8_t nrOfLines) const =0;
virtual void prn_printCompleteFontTable(void) const =0;
virtual void prn_printBarcode(uint8_t kindOf, uint8_t withText, uint8_t offset, uint8_t rotation, uint8_t dataLeng, uint8_t *data) const =0;
// kind of barcode: 0=Code39 1=Code128 2=EAN13 3= 2/5interleaved 4=UPC-A 5=EAN8
// withText: print readable text below
// offset: move by pixel from left border
// rotation
// dataLeng in byte
virtual void prn_sendQRdata(QByteArray *buf) const =0;
// maximal 150 alphanummeric bytes
virtual void prn_printQRcode(void) const =0;
// QRcode may have 1...150 alphanummeric data, must be transfered in advance
virtual void prn_printLogo(uint8_t nrOfLogo, uint8_t offset ) const =0;
// nrOfLogo: 1..4 in flash 5...8 in Ram
// offset: in mm form left border
// .........................................................
// Parking Ticket (print-out document) designer TD
// .........................................................
// Predefine document Layout (e.g. parking ticket) in advance and stroe it for quick and easy use
// in opposite to the above "single" commands you need only one or a few commands at vending time.
// Stored text is just send to printer once the printing command is issued
// stored commands within the text are interpreted and executed right at the place (in ticket) they are
// example: start bold, <text in bold>, stop bold
// Predefinition of up to 16 ticket Layouts is possible, 0...1280 byte each
// Number 0..15, al keept non-volatile
// up to 8 dynamic values can be defined in the template ("print val3 here") and will be sent with printing command
// example: print current time at this point (the time of printing not the storage time!!)
virtual void pri_startTicketDesign(void) const =0;
// start for every new printer document, reseting collecting buffer
// all further functions write/append text, numbers and command to the ticket-buffer, up to 1278 bytes allowed
// return val of the appending functions: true=ok false=too long, buffer full
virtual int pri_TD_getCurrentSize(void) const =0;
// retval: 0...1278
virtual bool pri_TD_addText(QByteArray text) const =0;
// example: pri_TD_addText("Hello") const =0;
// example: pri_TD_addText(tempStr) const =0;
// retval: true=ok false=too long, buffer full
virtual bool pri_TD_addValue(int val) const =0;
// +/- 0...2^(31)
virtual bool pri_TD_addNewLine(void) const =0;
virtual bool pri_TD_addSign(char sign) const =0;
// example: '.' ' ' 0x20 'W' '$'
virtual bool pri_TD_addCommand(char group, char attribute, char p1, char p2, char p3, char p4, char p5) const =0;
// always add 8 byte to the ticket layout: ESC & group & attribute & parameter1...5
/* complete list of possible commands:
group 50 : paper
attribute 10 : move forward
p1: wayInMm p2: direction
attribute 11 : cut
p1: kind of, 1=full 2=partial, 3=eject
attribute 12 : new line(s)
p1: nr of lines 1...100
group 51 : fonts
attribute 10 : kind of font see description above
p1: 0...8
attribute 11 : font size
p1: 6...20
attribute 12 : font width
p1: 0...4
attribute 13 : font heigth
p1: 0...7
attribute 14 : switch bold print on/off
p1: 0=off 1=on
attribute 15 : switch invers print on/off
p1: 0=off 1=on
attribute 16 : switch underlined print on/off
p1: 0=off 1=on
group 52 : print graphics
attribute 10 : print barcode with dynamic data 6 and 7
p1...p5 = kindOf, withText, offset, rotation, dataLeng, see description above
attribute 11 : print QRcode with preset data
attribute 12 : print Logo
p1=nrOfLogo, p2=offset
group 53 : print dynamics
attribute 10 :
p1: 1...8 = print dynData 0..7 at this place
*/
virtual char prn_clearDocument(uint8_t documentNumber) const =0;
// clear memory buffer for ONE document
// function takes a second! don't send right before "store doc"
virtual bool prn_store_Document(uint8_t documentNumber ) const =0;
// send the predefined Layout (generated with above TD functions) to DeviceController to save
// documentNumber=0...15
// maximal 1280 bytes each
// allowed: 0x20...0xFF, 0x0A, 0x0C, 0x1B (LF, CR, Esc)
// 0x1B=start of embedded command (next 7bytes = command)
// with a print command a set of 8 dynamic strings can be sent
// the place in the ticket layout is predefined (already in DC memory)
// the dynamics are first calculated at printing time
virtual bool prn_printDocument(uint8_t documentNumber, struct T_dynDat *dynTicketData) const =0;
// 36
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// Mifare Card Reader
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void mif_readerOn(bool on) const =0;
virtual bool mif_cardIsAttached(void) const =0;
virtual bool mif_isMifarePowerOn(void) const =0;
virtual void request_MifareReaderState() const =0;
virtual void request_MifareCardType() const =0;
virtual void request_MifareAtbType() const =0;
virtual void request_MifareID() const =0;
virtual void request_MifareData(uint8_t dataBlockNumber) const =0;
//virtual void request_MifareData() const =0;
// dataBlockNumber must be 0....11, returns 64byte of data
virtual bool test_serialMux2isSetToMifare(void) const =0;
virtual void mif_creatAtbCard(uint8_t cardType) const =0;
/* data description:
byte 0: current read state: 0=power off 1=reader-fault 2=ready
3=just reading 4=read complete
5=read partial, removed too early
6=state unknown
byte 1,2: read data length from card
3: 1=reader is OK (reported serial nr is OK) 0=wrong or no reader
4...15: reader version, expected "ATB25-1.8"
byte16: 1=card is present 0:not
17: 0
18: card type reported from reader
19: 1=allowed card type 0=not
20: card size: 1 or 4 (dec) = card size
21: LengthOfUID: 4 or 7 (dec) (byte)
22: UID 8 byte in hex
byte 30: sector logged: 0
byte 31: current sector: 0
byte 32: result, always 0
*/
virtual uint8_t mif_returnReaderStateAndCardType(uint8_t *buf, uint8_t maxBufferSize) const =0;
// retval 0=OK 1=error host buffer too small
virtual bool mif_readerIsOK(void) const =0;
virtual bool mif_cardAttached(void) const =0;
virtual uint8_t mif_readResult(void) const =0;
// result: 0: unknown or still in progress
// 1: card read successful
// 2: reading error
//virtual void mif_clearDataBuffer(void) const =0;
virtual QString mif_cardUID(void) const =0;
// returns string with 8 byte
//virtual bool mif_isBlockAvailable(uint8_t blkNr) const =0;
//blkNr=0...11
//virtual uint32_t mif_getAvailableDataBlocks(void) const =0;
// bit0=1 if block 0 = valid ...up to ... bit 11=1 if block 11=read
virtual uint8_t mif_getCardDataDec(uint8_t blkNr, uint8_t *buf, uint8_t maxBufferSize) const =0;
virtual QString mif_getCardDataStr(uint8_t blockNumber) const =0;
// with blockNumber=0...11
// read mifare data independant from blocks
//virtual uint16_t mif_getNrOfAvailableDataBytes(void) const =0;
//virtual bool mif_getCardData768byteDec(uint8_t *buf, uint16_t bufferSize) const =0;
//virtual bool mif_getCardDataDec(uint16_t fromAddr, uint16_t toAddr, uint8_t *buf, uint16_t bufferSize) const =0;
//virtual QString mif_getCardDataStr(bool useHexFormat, char seperator) const =0;
// 16
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// Credit Card Terminal
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void credit_switchPower(bool on) const =0;
// the same as modem power
virtual bool cred_isCreditPowerOn(void) const =0;
virtual bool test_serialMux2isSetToCredit(void) const =0;
virtual void credit_switchWake(bool WAKEACTIVE) const =0;
// 4
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// Modem
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void mod_switchPower(bool on) const=0;
virtual bool mod_isGsmPowerOn(void) const =0;
virtual bool test_serialMux1isSetToModem(void) const =0;
virtual void mod_switchWake(bool WAKEACTIVE) const=0;
// 2
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// MDB Bus
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void mdb_switchPower(bool on) const =0;
virtual void mdb_switchWake(bool WAKEACTIVE) const =0;
virtual bool mdb_WakeINisActive(void) const =0;
virtual bool mdb_testIsmdbTxDon(void) const =0;
virtual bool mdb_isMdbPowerOn(void) const =0;
virtual void request_MDB_Status() const =0;
virtual void request_MDB_lastResponse() const =0;
virtual bool test_getDO_mdbRXtst(void) const =0;
// readback digital outputs of connected devices
// these functions are not needed for normal operation
// but can be used to test and verify conditions
virtual void mdb_sendBusReset(void) const =0;
virtual void mdb_sendCommand(uint8_t toMdbDevice, uint8_t mdbCommand) const =0;
// send one bus command directly over mdb bus, refer to mdb manual for commands
// this command is not needed in normal operation, just for new or special things
virtual void mdb_sendMessage(uint8_t toMdbDevice, uint8_t mdbCommand, uint8_t nrOfData, uint8_t *dataBuffer) const =0;
// nrOfData = sizeOf(dataBuffer) maximal 34 byte according mdb specs
// same as mdb_sendCommand, just with data
virtual bool mdb_busIsReadyToWork() const =0;
virtual bool mdb_deviceVoltageOK() const =0;
virtual bool mdb_busVoltageOk() const =0;
virtual uint8_t mdb_getLastDeviceResponse(uint8_t *fromDevice, uint8_t *lastRequest,
uint8_t *responseLength, uint8_t *responseBuffer) const =0;
// fromDevice: device nr from which data was requested 0,1,2,3
// lastRequest: sent mdb command
// responseLength: nr of payload data (after mdb-ack) 0...34
// responseBuffer holds payload data (answer from mdb device)
// return val: mdb result of this request: 1=got ACK 2=got 3xNAK 3=no or bad response 4:got Data (after ACK)
// 15
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// Coin Changer, Checker (EMP)
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void request_EMP_allParameters() const =0;
virtual void request_EMP_lastCoin() const =0;
virtual uint8_t emp_returnLastCoin(uint16_t *value, uint8_t *signal) const =0;
// use for changer
// ---------------------------------- Electronic Coin Validator EMP -----------------------------------------
virtual void emp_sendSettings(uint16_t coinAcceptance, uint8_t tokenChannel, uint16_t *coinDenomination ) const =0;
// coinAcceptance: bit0=coin1 (lowest donomination) bit15=coin16 bitH=accept bit L = deny coin (no validation)
// tokenChannel 0...31: if this signal comes from emp then a token was inserted
// coinDenomination = array of 16 coin values (e.g. 5, 10, 20...)
virtual void emp_pollingOnOff(uint8_t on) const =0;
virtual void emp_startCoinAcceptance(void) const =0;
virtual void emp_stopCoinAcceptance(void) const =0;
virtual void emp_getAllParameters(struct T_emp *emp) const =0;
// see struct in hwapi.h
// usage example:
// hwapi *HWaccess const =0;
// HWaccess = new hwapi() const =0;
// struct T_emp myEmp const =0;
// HWaccess->emp_getAllParameters(&myEmp) const =0;
// readval=myEmp.pollingRunning const =0;
virtual uint8_t emp_chkIfCoinInserted(void) const =0;
// retval: 0...16 coins left in FIFO
virtual void emp_getNewCoinRecord(uint8_t *valid, uint8_t *signal, uint8_t *error, uint16_t *value) const =0;
// with every call ONE coin is taken out of FIFO and pointer decremented
// valid: should be 1
// signal: comes right from coin checker, 0...15 (0=first programmed coin type) 0xFF=no signal
// error: was reported from EMP as dynamic signal right after coin insertion (instead of
// coin signal), example: 3=unknown coin 4=coin is blocked by host. 0xFF=no error
// value: of the coin. Depends on parameter "coinDenomination" in function "emp_sendSettings"
// if coinDenomination[coin 0..15] = 0 then the value programmed in coin checker is taken
// if coinDenomination > 0 then this value is taken.
// Useful in case of two currencies (adapt to local currency) or for token.
// function gives more details as "emp getLastCoin()" but "emp getLastCoin()" is easier to use
// alternativ to emp_getNewCoinRecord( ):
virtual uint8_t emp_giveLastCoin(uint16_t *value, uint8_t *signal) const =0;
// retval: 0: NO coin stored 1: valid coin 2: got wrong coin or coin denied
// value: if retval1: value of the coin if reval=2: error number
// 0xFF means NO error or NO signal (as 0 is a valid error/signal)
// signal: channel nr reported from checker 0...15
// 11
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// Coin blocker, Coin Escrow, Coin reject
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void shut_move(bool open) const =0;
virtual void esc_moveFlaps(uint8_t flap ) const =0;
// 0: close both 1: open take-flap 2: open return
virtual void coin_switchRejectMotor(uint8_t dir) const =0;
virtual bool coid_isAttached(void) const =0;
virtual bool coin_escrowIsOpen(void) const =0;
virtual bool cash_getRejectMotorHomePos(void) const=0;
virtual bool coin_shutterIsOpen(void) const =0;
virtual bool coin_shutterTestOutput(void) const =0;
virtual uint8_t coin_escrowFlapOpened(void) const =0;
// retval: 1:return flap is open 2:take flap is open 0:closed
virtual void shut_openOnce(void) const =0;
// and close automatic after shutter time
virtual void shut_openForCoin(bool start) const =0;
// open flap if coin is attached
// once process is started it runs until stop command
virtual void shut_sendOpeningTime(uint16_t timeIn_ms ) const =0;
// after this time without retrigger the flap is closed
virtual void esc_takeMoney(void) const =0;
// and close automatically after escrow time (1s)
virtual void esc_returnMoney(void) const =0;
// and close automatically after escrow time (1s)
virtual void coin_rejectCoins(void) const =0;
// 15
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// MDB Bill evaluator
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// doors, locks, cashboxes
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void lock_switchContactPower(bool on) const =0;
virtual bool door_isContactPowerOn(void) const =0;
virtual uint8_t door_getLocks(void) const =0;
// retval bit0: upper lever is up (=open)
// bit1: upper lever is down (=locked)
// bit2: lower lever is up
// bit3: lower lever is down (=locked)
virtual bool door_upperDoorIsLocked(void) const =0;
virtual bool door_upperDoorIsUnlocked(void) const =0;
virtual uint8_t lock_switchUpperLock(uint8_t dir) const =0;
// dir 0=off 1=up 2=down
// move lock until stop cmd (0)
virtual uint8_t lock_openUpperDoor(void) const =0;
// Locks stops automatically at end switch or by timeout
virtual uint8_t lock_closeUpperDoor(void) const =0;
// Locks stops automatically at end switch or by timeout
virtual uint8_t door_getSwitches(void) const =0;
// retval: bit0: upper door 1: low door 2:vault door
virtual bool door_isUpperDoorOpen(void) const =0;
virtual bool door_lowerDoorIsLocked(void) const =0;
virtual bool door_lowerDoorIsUnlocked(void) const =0;
virtual uint8_t lock_switchLowerLock(uint8_t dir) const =0;
// dir 0=off 1=up 2=down
// move lock until stop cmd (0)
virtual uint8_t lock_getDO_motors(void) const =0;
// bit0: upper lock forward bit 1 backward
// bit2: lower lock forward bit 3 backward
virtual uint8_t lock_openLowerDoor(void) const =0;
// there's no closing function as Lock always makes one complete cycle and can be locked again immed.
virtual uint8_t lock_closeLowerDoor(void) const =0;
virtual bool door_isLowerDoorOpen(void) const =0;
virtual uint8_t vault_getSwitches(void) const =0;
// retval bit0: cash box, bit 1: bill box
virtual bool vault_isVaultDoorOpen(void) const =0;
virtual void lock_switchVaultDoor(void) const =0;
virtual bool vault_isCoinVaultIn(void) const =0;
virtual bool vault_isBillVaultIn(void) const =0;
// 21
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
// LEDs, Barrier, Alarm, Relais, Aux
// $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
virtual void led_switchLedIllumination(uint8_t on) const = 0;
virtual void led_switchLedCoinbassin(uint8_t on, uint8_t ton, uint8_t tof) const =0;
virtual bool led_coinIsOn(void) const =0;
// read back digital output from DC-uC-Port
virtual bool led_frontIsOn(void) const =0;
virtual void led_switchLedService(uint8_t on) const =0;
// on=1 off=0
virtual bool led_insideIsOn(void) const =0;
virtual void led_switchLedPaper(uint8_t on, uint8_t ton, uint8_t tof) const =0;
virtual bool led_ticketIsOn(void) const =0;
virtual void led_switchLedStart(uint8_t on, uint8_t ton, uint8_t tof) const =0;
virtual bool led_StartIsOn(void) const =0;
virtual void led_switchLedPinPad(uint8_t on, uint8_t ton, uint8_t tof) const =0;
virtual bool led_pinIsOn(void) const =0;
virtual void fan_switchFan(bool on) const =0;
virtual void alarm_switchSiren(bool on) const =0;
virtual bool fan_isOn(void) const =0;
virtual bool siren_isOn(void) const =0;
virtual void bar_OpenBarrier(bool open) const =0;
virtual bool bar_relayIsOn(void) const =0;
virtual bool bar_optoIn1isOn(void) const =0;
virtual bool bar_optoIn2isOn(void) const =0;
virtual void aux_power(bool on) const =0;
virtual bool aux_powerIsOn(void) const =0;
virtual void aux_setUsage(uint8_t PinDirection) const =0;
virtual void aux_setOutputs(uint8_t PinIsHigh) const =0;
virtual bool aux_isAuxPowerOn(void) const =0;
virtual uint8_t aux_getAuxInputs(void) const =0;
// ------------------------------------------------------------------------------------
// 27.3.2023: Use Device-Controller's Bootloader to send hex-file
// ------------------------------------------------------------------------------------
virtual void bl_rebootDC(void) const =0;
virtual void bl_startBL(void) const = 0;
// send command within 4s after DC power-on, otherwise bl is left
virtual bool bl_checkBL(void) const = 0;
// send command to verify if bl is up
virtual bool bl_isUp(void) const =0;
// return true is bl is up and running
// also initializes "sendFile"
virtual void bl_sendAddress(uint16_t blockNumber) const=0;
// send start address, nr of 64byte-block, start with 0
// will be sent only for following block-numbers:
// 0, 1024, 2048, 3072 and 4096, so basically every 64kByte
// for other addresses nothing happens
virtual uint8_t bl_wasSendingAddOK(void) const=0;
// return val: 0: no response by now 1:error 10: OK
virtual void bl_openBinary(void) const=0;
// to be used within CashAgent, momentary not processed
virtual void bl_sendDataBlock(uint8_t length, uint8_t *buffer) const=0;
// send 64 byte from bin file
virtual void bl_sendLastBlock(void) const=0;
// send this command after all data are transfered
virtual uint8_t bl_wasSendingDataOK(void) const=0;
// return val: 0: no response by now 1:error 10: OK
virtual void bl_stopBL(void) const=0;
// leave BL and start (the new) application
//virtual bool bl_isDiagAvailable(void) const=0;
//virtual QString dc_getDiagText(void) const=0;
// Komplett-schreib Funktion, noch nicht getestet
// Nachteil: keine Rückmeldung wie lang's noch dauert
//virtual void bl_startSending(void) const=0;
// call once after BL is working and file is loaded
//virtual void bl_sendFile(void) const=0;
// call cyclic while loading bin-file to bootloader
// ------------------------------------------------------------------------------------
// 6.4.2023: new functions for coin collection and printing
// some new system functions
// ------------------------------------------------------------------------------------
virtual bool rtc_setTimeDateDirect(struct Trtc_DateTime *DateTime) const=0;
// return true if sending, false if cmd-stack is full
virtual bool rtc_getExtendedTime(uint8_t *leng, uint8_t *data) const=0;
/*
buf[0]=GlobTime.Hours;
buf[1]=GlobTime.Min;
buf[2]=GlobTime.Sec;
buf[3]=GlobTime.Year;
buf[4]=GlobTime.Month;
buf[5]=GlobTime.Day;
buf[6]=GlobTime.DOW;
buf[7]=' '; // immer auf 32bit auffüllen sonst Speicherproblem beim Master!
uitmp=GlobTime.MinOfDay;
buf[8]=swl_getOneByteFromUint(uitmp, 0);
buf[9]=swl_getOneByteFromUint(uitmp, 1);
buf[10]=' ';
buf[11]=' ';
ultmp=GlobTime.SecOfDay;
buf[12]=swl_getOneByteFromUlong(ultmp, 0);
buf[13]=swl_getOneByteFromUlong(ultmp, 1);
buf[14]=swl_getOneByteFromUlong(ultmp, 2);
buf[15]=swl_getOneByteFromUlong(ultmp, 3);
buf[16]=swl_isLeap(GlobTime.Year);
buf[17]=swl_getNextLeapYear(GlobTime.Year);
buf[18]=swl_getLastLeapYear(GlobTime.Year);
buf[19]=swl_hoursOfThisWeek(GlobTime.DOW, GlobTime.Hours);
uitmp=swl_minutesOfThisWeek(GlobTime.DOW, GlobTime.Hours, GlobTime.Min);
buf[20]=swl_getOneByteFromUint(uitmp, 0); // 0=low byte 1=high byte
buf[21]=swl_getOneByteFromUint(uitmp, 1);
uitmp=swl_hoursOfThisMonth(GlobTime.Day, GlobTime.Hours);
buf[22]=swl_getOneByteFromUint(uitmp, 0);
buf[23]=swl_getOneByteFromUint(uitmp, 1);
uitmp=swl_minutesOfThisMonth(GlobTime.Day, GlobTime.Hours, GlobTime.Min);
buf[24]=swl_getOneByteFromUint(uitmp, 0);
buf[25]=swl_getOneByteFromUint(uitmp, 1);
uitmp=swl_GetDaysOfYear(GlobTime.Year, GlobTime.Month, GlobTime.Day);
buf[26]=swl_getOneByteFromUint(uitmp, 0);
buf[27]=swl_getOneByteFromUint(uitmp, 1);
uitmp=swl_GetHoursOfYear(GlobTime.Year, GlobTime.Month, GlobTime.Day, GlobTime.Hours);
buf[28]=swl_getOneByteFromUint(uitmp, 0);
buf[29]=swl_getOneByteFromUint(uitmp, 1);
buf[30]=0;
buf[31]=0;
ultmp= swl_GetMinutesOfYear(GlobTime.Year, GlobTime.Month, GlobTime.Day,
GlobTime.Hours, GlobTime.Min);
buf[32]=swl_getOneByteFromUlong(ultmp, 0);
buf[33]=swl_getOneByteFromUlong(ultmp, 1);
buf[34]=swl_getOneByteFromUlong(ultmp, 2);
buf[35]=swl_getOneByteFromUlong(ultmp, 3);
buf[36]=rtc_getSqwaveSettings();
buf[37]=0;
buf[38]=0;
buf[39]=0;
ultmp= 0; // Minutes of the Millenium
buf[40]=swl_getOneByteFromUlong(ultmp, 0);
buf[41]=swl_getOneByteFromUlong(ultmp, 1);
buf[42]=swl_getOneByteFromUlong(ultmp, 2);
buf[43]=swl_getOneByteFromUlong(ultmp, 3);
dc2prot_setReadData(44, buf);
*/
virtual bool rtc_getExtendedTime(struct T_extTime *exTime) const=0;
virtual bool sys_runCompleteTest(void) const=0;
// warning: lasts 20s in one pace
// return true if sending, false if cmd-stack is full
virtual bool sys_ready4sending(void) const=0;
// return true if a Json-file can be sent
virtual bool sys_sendJsonFileToDc(uint8_t kindOfFile, uint8_t nrOfTemplate, uint8_t *content ) const=0;
// kindOfFile: 1=config, 2=device, 3=cash, 4=serial, 5=time, 6=printer
// nrOfTemplate=1...32 if kindOfFile==6
// content = content of the Json file, max 800byte ascii signs
// file is 0-terminated
// return true if sending, false if cmd-stack is full
virtual bool prn_sendDynamicPrnValues(uint8_t *dynPrnVal ) const=0;
// dynPrnVal = array of 8 Variables with 8 byte each, come as ascii string
// like: char prn_dynPrnVal[8][8];
// return true if sending, false if cmd-stack is full
virtual bool prn_printTemplate(uint8_t nrOftemplate) const=0;
// print one of the templates loaded by Json prior
// nr = 1..32
// return true if sending, false if cmd-stack is full
virtual void log_getHoldAccountNumbers(uint8_t *nrOfVals, uint16_t *accNr ) const=0;
// returns all acc nrs of the backuped vault records
// use: uint16_t backupedAccNumbers[8]
virtual bool log_selectVaultRecord(uint16_t accountNr ) const=0;
// return true if sending, false if cmd-stack is full
// and trigger transfer
virtual bool log_chkIfVaultRecordAvailable(void) const=0;
// return true if completly received
virtual bool log_getVaultRecord(struct T_vaultRecord *retVR) const=0;
// which was selected by: log_selectVaultRecord()
// to be forwarded to Ismas
virtual bool prn_printAccountReceipt(void) const=0;
// return true if sending to DC OK, false if cmd-stack is full
virtual bool prn_printTestTicket(void) const=0;
// return true if sending to DC OK, false if cmd-stack is full
virtual bool cash_startPayment(uint32_t amount) const=0;
// 17.4.23TS: extended to 32bit
virtual uint32_t getInsertedAmount(void) const=0;
virtual uint16_t getLastInsertedCoin(void) const=0;
virtual bool getAllInsertedCoins(uint16_t *types, uint16_t *values) const=0;
// all inserted coins (max 64) since "cash_startPayment"
virtual bool cash_cancelPayment(void) const=0;
// and return coins
virtual bool cash_stopPayment(void) const=0;
// and keep coins in escrow
// after ticket/goods issue:
virtual bool vend_success(void) const=0;
// conclude payment process, encash all inserted coins to vault. Printing was successful
// if possible return change
virtual bool vend_failed(void) const=0;
// conclude payment process and return all inserted coins
virtual uint8_t mif_getCardType(QString *cardholder) const=0;
// return 1,2,3,4 = upper, lower access card, printer test, coin test
// cardholder: 7byte Name-String
virtual uint64_t sys_getWakeSource(void) const =0;
// retval: 6 bytes, bit coded, 1=event keeps DC awake
virtual void sys_getDeviceConditions(uint8_t *leng, uint8_t *data) const=0;
/*
outBuf[0]=modCond.ram;
outBuf[1]=modCond.intEe;
outBuf[2]=modCond.extEe;
outBuf[3]=modCond.rtc;
outBuf[4]=modCond.boardHw;
outBuf[5]=modCond.printer;
outBuf[6]=modCond.modem;
outBuf[7]=modCond.signal;
outBuf[8]=modCond.regist;
outBuf[9]=modCond.mdbBus;
outBuf[10]=modCond.coinChecker;
outBuf[11]=modCond.coinEscrow;
outBuf[12]=modCond.mifareReader;
outBuf[13]=modCond.creditTerm;
outBuf[14]=modCond.coinReject;
outBuf[15]=modCond.coinSafe;
outBuf[16]=modCond.billSafe;
outBuf[17]=modCond.voltage;
outBuf[18]=modCond.temper;
outBuf[19]=modCond.poweronTest;
outBuf[20]=modCond.doorState;
outBuf[21]=modCond.doorWasOpened;
outBuf[22]=modCond.changer;
outBuf[23]=modCond.coinBlocker;
outBuf[24]=modCond.billReader;
outBuf[25]=modCond.ResetReason;
outBuf[26]=modCond.allModulesChecked;
outBuf[27]=modCond.alarmState;
outBuf[28]=0;
outBuf[29]=0;
*/
virtual void sys_getDeviceConditions(struct T_moduleCondition *devCond) const=0;
virtual void sys_getDynMachineConditions(uint8_t *leng, uint8_t *data) const=0;
/*
outBuf[pBuf++]=dynCond.allDoorsDebounced;
outBuf[pBuf++]=dynCond.openedAuthorized;
outBuf[pBuf++]=dynCond.CBinDebounced;
outBuf[pBuf++]=dynCond.upperDoor;
outBuf[pBuf++]=dynCond.middleDoor;
outBuf[pBuf++]=dynCond.lowerDoor;
outBuf[pBuf++]=dynCond.coinBox;
outBuf[pBuf++]=dynCond.billBox;
outBuf[pBuf++]=dynCond.modeAbrech;
outBuf[pBuf++]=dynCond.onAlarm;
outBuf[pBuf++]=dynCond.nowCardTest;
outBuf[pBuf++]=dynCond.nowPayment;
outBuf[pBuf++]=dynCond.lastMifCardType;
outBuf[pBuf++]=dynCond.lastSDoorState;
outBuf[pBuf++]=dynCond.lastVDoorState;
outBuf[pBuf++]=dynCond.lastCBstate;
outBuf[pBuf++]=dynCond.paymentInProgress;
outBuf[pBuf++]=0;
uitmp=dynCond.U_Batt;
outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETLOWBYT);
outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETHIGHBYT);
uitmp=dynCond.Temperatur;
outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETLOWBYT);
outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETHIGHBYT);
uitmp=dynCond.nrCoinsInBox; // send seperate also
outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETLOWBYT);
outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETHIGHBYT);
ultmp=dynCond.amountInBox; // send seperate also
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWESTBYT);
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWMID);
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHMID);
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHESTBYT);
ultmp=dynCond.totalTransVolume;
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWESTBYT);
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWMID);
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHMID);
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHESTBYT);
ultmp=dynCond.totalNrOfVends;
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWESTBYT);
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWMID);
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHMID);
outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHESTBYT);
// 36
outBuf[pBuf++]=dynCond.jsonValid_config;
outBuf[pBuf++]=dynCond.jsonValid_device;
outBuf[pBuf++]=dynCond.jsonValid_cash;
outBuf[pBuf++]=dynCond.jsonValid_print;
outBuf[pBuf++]=dynCond.jsonValid_serial;
outBuf[pBuf++]=dynCond.jsonValid_time;
outBuf[pBuf++]=dynCond.lastFileType;
outBuf[pBuf++]=0;
*/
virtual void sys_getDynMachineConditions(struct T_dynamicCondition *dynMachCond) const=0;
// content of Cashbox
virtual uint32_t cash_getAmountInVault(void) const=0;
virtual uint16_t cash_getNrCoinsInVault(void) const=0;
virtual uint8_t prn_getPrintResult() const=0;
// in case of print-error get detailed error:
virtual uint8_t prn_getCurrentPrinterState() const=0;
// 0: printer OK
// bit0: near paper end bit1: no paper
// bit2: temperature error bit3: error head open
// bit4: paper jam in cutter
// bit6: no response bit7: serial rec. error
// bit5: printer not ready
signals:
virtual void hwapi_templatePrintFinished_OK(void) const=0;
virtual void hwapi_templatePrintFinished_Err(void) const=0;
virtual void hwapi_gotNewCoin(void) const=0;
virtual void hwapi_vendStopByMax(void) const=0;
virtual void hwapi_vendStopByPushbutton(void) const=0;
};
// History
// 11.10.2021: V1.0 222 functions
// 23.12.2021: V1.1 added block-parameter to function "read mifare data"
// 30.12.2021: V1.2 added function: mif_clearDataBuffer(), mif_isBlockAvailable(uint8_t blkNr) and mif_getAvailableDataBlocks()
// 1.1.2022: V1.3 Mifare extended. ( background: read 16 x 48byte from card to DC, read 12 x 64byte from DC to CA)
// new: read full card with 768bytes from HWapi without block borders
// added: mif_getNrOfAvailableDataBytes mif_getCardData768byteDec(uint8_t *buf, uint16_t bufferSize)
// mif_getCardDataDec(uint16_t fromAddr, uint16_t toAddr, uint8_t *buf, uint16_t bufferSize)
// mif_getCardDataStr(bool useHexFormat, char seperator)
// 29.03.2023: V3.1 some extensions for PSA1256_ptu5,
// V3.2 Bootloader improvement
// 12.04.2023: V3.3 new features extended: loading and using Json-files, cash-collection, cash-data-logging
// 14.04.2023: V3.4 new features extended: sys_getDynMachineConditions, sys_getDeviceConditions and
// rtc_getExtendedTime return struct in addition. New function to select and get VaultRecord
//
//#define HWINF_iid "Atb.Psa2020.software.HWapi/3.1"
//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.1"
//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.3"
//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.4"
#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.5"
Q_DECLARE_INTERFACE(hwinf, HWINF_iid)
#endif