e5a8cfd copy of include/interfaces.h 5e6e601 Minor change f3d9c69 Added dc_printTemplate. Fixed implementation of dc_updatePrinterTemplate 3f10469 Added dc_printTemplate. Changed interface for updating printer templates. d92bdbf Added dc_printTemplate. Changed interface for updating printer templates. git-subtree-dir: DCPlugin git-subtree-split: e5a8cfd1cd6a0ece3db295669c801b8e2ea9332b
1250 lines
54 KiB
C++
1250 lines
54 KiB
C++
/*
|
|
matching interfaces.h:
|
|
|
|
// History
|
|
// 11.10.2021: V1.0 222 functions
|
|
// 23.12.2021: V1.1 added block-parameter to function "read mifare data"
|
|
// 30.12.2021: V1.2 added function: mif_clearDataBuffer(), mif_isBlockAvailable(uint8_t blkNr) and mif_getAvailableDataBlocks()
|
|
// 1.1.2022: V1.3 Mifare extended. ( background: read 16 x 48byte from card to DC, read 12 x 64byte from DC to CA)
|
|
// new: read full card with 768bytes from HWapi without block borders
|
|
// added: mif_getNrOfAvailableDataBytes mif_getCardData768byteDec(uint8_t *buf, uint16_t bufferSize)
|
|
// mif_getCardDataDec(uint16_t fromAddr, uint16_t toAddr, uint8_t *buf, uint16_t bufferSize)
|
|
// mif_getCardDataStr(bool useHexFormat, char seperator)
|
|
// 29.03.2023: V3.1 some extensions for PSA1256_ptu5,
|
|
// V3.2 Bootloader improvement
|
|
// 12.04.2023: V3.3 new features extended: loading and using Json-files, cash-collection, cash-data-logging
|
|
|
|
//#define HWINF_iid "Atb.Psa2020.software.HWapi/3.1"
|
|
//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.1"
|
|
#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.3"
|
|
|
|
|
|
PSA1259 hardware control using the DeviceController DC2
|
|
|
|
covering enclosure (switches and doors) and money devices,
|
|
controls mifare card to access or program
|
|
optional it can control printer, modem, bar code reader and credit card
|
|
|
|
* API to the PSA1259 Hardware
|
|
* All data come in from device controller via serial interface and will be stored
|
|
* in "PI" = peripheral image
|
|
* PI is updated every 100ms (up to 30ms possible)
|
|
* This api uses stored pi data and returns them in the following functions
|
|
* created: Q1/2020 TS
|
|
*
|
|
|
|
The devices, connected to device controller2 (DC2) can be controlled in different access levels.
|
|
Level 1:
|
|
direct connection to DC2, check versions, state and parameters
|
|
control serial interfaces
|
|
digital/analog IO's
|
|
read and write to connected devices on lowest level, this is a kind of fall-back-level
|
|
in case higher levels fail or do not support the needed (new) function
|
|
Example: send a specific printer command, several bytes that need to be conform to
|
|
printer manual. This command is routed to the printer through the DC2 without
|
|
any action of the DC. You can write your own device driver that way.
|
|
Level 1 is flexible but complicated
|
|
|
|
Level 2:
|
|
The DC controls the connected devices containing a device driver. The DC offers
|
|
usage of the device by simple commands,
|
|
Example: "Printer on", "set Font size 3" "print "hello world"", "cut"
|
|
In opposite to level 1 where you had to send a set of numbers and letters.
|
|
In other words: you "talk" to the device controller, not to the device itself.
|
|
|
|
Level 3:
|
|
start/stop complete processes.
|
|
Example: 1) print (predefined) document nr 3 with Text, letter size, font set, cut.
|
|
Also power up/down the printer, check if paper ok and so on.
|
|
*/
|
|
|
|
/*
|
|
Another access example: control the coin unit
|
|
|
|
Level 1): read digital inputs to detect coin,
|
|
switch digital output which opens coin slot
|
|
communicate with coin checker by certain mdb-commands (manual conform)
|
|
poll coin checker for inserted coins
|
|
close coin slot after 3seconds by setting DO to 0....
|
|
|
|
Level 2): get message of attached coin from DC
|
|
send command "initialize coin checker" to DC
|
|
send command "open slot for 3s"
|
|
poll DC for inserted coins, DC polls coin checker in right way, no need
|
|
to know the data sheet of the coin checker or mdb-bus
|
|
command to DC "open coin escrow's return flap for 1s"
|
|
|
|
Level 3): send command: "start payment process"
|
|
all coin devices are started up
|
|
coin blocker opens for 3s if a coin is attached
|
|
coin checker summarizes inserted value and reports sum
|
|
later send command "stop payment process" (puts coins to vault) or
|
|
send command "cancel payment process" (returns coins to user)
|
|
|
|
*/
|
|
|
|
#ifndef hwapi_H
|
|
#define hwapi_H
|
|
|
|
#include <stdint.h>
|
|
#include <QTabWidget>
|
|
#include <QtPlugin>
|
|
#include <QObject>
|
|
#include "interfaces.h"
|
|
#include "datIf.h"
|
|
|
|
|
|
|
|
class hwapi : public QObject,
|
|
public hwinf
|
|
{
|
|
Q_OBJECT
|
|
Q_PLUGIN_METADATA(IID "Atb.Psa2020.software.HWapi/1.0" ) //FILE "HWapi.json")
|
|
Q_INTERFACES(hwinf)
|
|
|
|
DownloadResult sendNextAddress(int bNum) const;
|
|
DownloadResult sendNextDataBlock(QByteArray const &b, int bNum) const;
|
|
DownloadResult sendStatus(int ret) const;
|
|
DownloadResult dc_downloadBinary(QByteArray const &binary) const;
|
|
|
|
bool startBootloader() const;
|
|
bool stopBootloader() const;
|
|
bool openSerial(int br, QString baudrate, QString comPort) const;
|
|
bool closeSerial(QString comport) const;
|
|
bool resetDeviceController() const;
|
|
QByteArray loadBinaryDCFile(QString filename) const;
|
|
bool downloadBinaryToDC(QString const &bFile) const;
|
|
public:
|
|
explicit hwapi(QWidget *parent = nullptr);
|
|
|
|
T_datif *myDatif;
|
|
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Level 0 commands, interface
|
|
// open, close, change serial interface
|
|
// actually not neccessary as it is opened automatically on program start
|
|
// start automatic READ requests
|
|
// ------------------------------------------------------------------------------
|
|
|
|
bool dc_openSerial(int BaudNr, QString BaudStr, QString ComName, uint8_t connect) const override;
|
|
// BaudNr: 0:1200 1:9600 2:19200 3:38400 4:57600 5:115200
|
|
// BaudStr: for exapmle "19200"
|
|
// ComName: for example "COM48"
|
|
// connect: 0, 1
|
|
|
|
bool dc_closeSerial(void) const override;
|
|
|
|
bool dc_isPortOpen(void) const override ;
|
|
|
|
void dc_autoRequest(bool on) const override ;
|
|
// select if READ-Requests are sent manually one by one or automatically
|
|
// automatically request ALL digital and analog sensors, get time/date, get status information
|
|
|
|
bool dc_updateDC(QString binFileName, QString baudrate,
|
|
QString comPort) const override;
|
|
|
|
bool dc_updatePrinterTemplate(enum FileTypeJson type,
|
|
QVector<int> templateIdx,
|
|
QVector<QString> fnames,
|
|
QString br,
|
|
QString serial) const override;
|
|
|
|
bool dc_printTemplate(enum FileTypeJson type,
|
|
QVector<int> templateIdx,
|
|
QString br,
|
|
QString serial) const override;
|
|
// ------------------------------------------------------------------------------
|
|
// Level 1, control device-controller (functions of µC)
|
|
// check serial connection to deviceController
|
|
// read response from DC2 (input data)
|
|
// some test function for serial communication
|
|
// also Bootloader is here
|
|
// ------------------------------------------------------------------------------
|
|
|
|
void dc_requTestResponse() const override;
|
|
// tell DC2 to return his TestString in order
|
|
// to test the serial and the baudrate
|
|
// must always be triggered manually, is never sent automatically
|
|
|
|
bool dc_readAnswTestResponse() const override;
|
|
// retval: true: test was successful, got right response
|
|
|
|
uint8_t dc_isRequestDone(void) const override;
|
|
// retval: 0: request is still in progress
|
|
// 1: answer from DC2 was OK
|
|
// 2: wrong answer from DC2
|
|
|
|
uint16_t dc_getCompletePayLoad(uint16_t plBufSiz, uint8_t *payLoad) const override;
|
|
// get data back in *pl, max 64 byte, can be used for diagnosis
|
|
// retval = nr of bytes received. If host buffer too small then
|
|
// only plBufSíz bytes are copied to pl
|
|
// plBufSíz=size of host buffer
|
|
|
|
void dc_setWakeFrequency(uint8_t period) const override;
|
|
// RTC wakes DC2 (and PTU) by hardware signal every 32seconds
|
|
// change wake signal period to 1...64s
|
|
|
|
void dc_OrderToReset(void) const override;
|
|
// want DC2 to reset (in order to start Bootloader)
|
|
|
|
QString dc_getSerialState(void) const override;
|
|
void dc_clrSerialStateText(void) const override;
|
|
|
|
void bl_sendDataDirectly(uint8_t length, uint8_t *buf) const override;
|
|
// send without protocol frame, needed for the DC bootloader
|
|
|
|
uint8_t getRawRecLength(void) const override;
|
|
|
|
uint8_t getRawReceivedData(uint8_t *receivedData) const override;
|
|
|
|
QString dc_getSerialParams(void) const override;
|
|
|
|
QString dc_getHWversion(void) const override;
|
|
|
|
QString dc_getSWversion(void) const override;
|
|
|
|
QString dc_getState(void) const override;
|
|
|
|
QString dc_getTxt4RsDiagWin(void) const override;
|
|
void dc_clrTxt4RsDiagWin(void) const override;
|
|
QString dc_get2ndTxt4RsDiagWin(void) const override;
|
|
void dc_clr2ndTxt4RsDiagWin(void) const override;
|
|
QString dc_getTxt4HsStateLine(void) const override;
|
|
void dc_clrTxt4HsStateLine(void) const override;
|
|
QString dc_getTxt4masterStateLine(void) const override;
|
|
void dc_clrTxt4masterStateLine(void) const override;
|
|
QString dc_getTxt4resultStateLine(void) const override;
|
|
void dc_clrTxt4resultStateLine(void) const override;
|
|
QString dc_getdataStateLine(void) const override;
|
|
void dc_clrTxt4dataStateLine(void) const override;
|
|
QString dc_getdatifLine(void) const override;
|
|
void dc_clrTxt4datifLine(void) const override;
|
|
|
|
// using DC2 Bootloader
|
|
void bl_iniChain(void) const override;
|
|
bool bl_importBinFile(QByteArray readBinFile, uint32_t fileSize, char withDispl) const override;
|
|
uint8_t bl_activatBootloader(uint8_t *sendData) const override;
|
|
uint8_t bl_startChain(void) const override;
|
|
uint8_t bl_readBLversion(uint8_t *sendData) const override;
|
|
// minimum size of sendData-buffer: 5byte retval: length
|
|
uint8_t bl_readFWversion(uint8_t *sendData) const override;
|
|
// minimum size of sendData-buffer: 5byte retval: length
|
|
|
|
uint8_t bl_prepareDC_BLcmd(uint8_t Cmd, uint8_t SendDataLength, uint8_t *sendData, uint8_t *outBuf) const override;
|
|
// make BL protocol, retval = outbuf length (5...133)
|
|
// bring data in correct form: start always with 0x02 finish with 0x03 and append checksum
|
|
// 0x02 Cmd < ...sendData ..> CRC CRC 0x03
|
|
// Data length = 0...64
|
|
// special conversion: if data contain 2 or 3 (STX, ETX) then write two bytes: 0x1B (=ESC) and data|0x80
|
|
// so maxlength = 5 + 2 x 64 (if all data are 2 or 3) without 2,3: maxlength = 5 + 64
|
|
|
|
uint8_t bl_exitBL(uint8_t *sendData) const override;
|
|
// minimum size of sendData-buffer: 5byte retval: length
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Level 2 DC2-onboard devices
|
|
// WR: set time
|
|
// RD. get time, get measure, get test results
|
|
// ------------------------------------------------------------------------------
|
|
|
|
// get UID, get time/date test results memory, RTC analog values
|
|
/*
|
|
struct Trtc_DateTime
|
|
{
|
|
uint8_t rtc_hour;
|
|
uint8_t rtc_min;
|
|
uint8_t rtc_sec;
|
|
uint8_t rtc_dayOfMonth;
|
|
uint8_t rtc_month;
|
|
uint8_t rtc_year;
|
|
uint8_t rtc_dayOfWeek;
|
|
};
|
|
*/
|
|
uint8_t rtc_getDateTime(struct Trtc_DateTime *rtc_DateTime) const override;
|
|
|
|
uint8_t rtc_setDateTime(void) const override;
|
|
// synch DC2 with PC or PTU system time and date
|
|
|
|
void rtc_getTime(uint8_t *hh, uint8_t *mm, uint8_t *ss) const override;
|
|
// get time directly
|
|
|
|
void rtc_getDate(uint8_t *yy, uint8_t *mm, uint8_t *dd) const override;
|
|
// get date directly
|
|
|
|
uint8_t rtc_getToday(uint8_t *dow, uint16_t *minOfToday, uint32_t *secOfToday) const override;
|
|
// dow=day of week, 1=monday...7
|
|
// minOfToday: 0=midnight...1439= 23:59
|
|
// secOfToday: 0=midnight...86399= 23:59:59
|
|
|
|
bool rtc_isLeapYear(uint8_t *lastLeapYear, uint8_t *NextLeapYear) const override;
|
|
// retval true: this year is leap year
|
|
|
|
bool rtc_isLeapYear() const override;
|
|
|
|
void rtc_getWeek(uint8_t *DayOfWeek, uint8_t *HoursOfWeek, uint16_t *MinutesOfWeek) const override;
|
|
// DayOfWeek: 1=monday...7
|
|
// HoursOfWeek: 0=Monday 0:00 o'clock...167=Sunday 23:00
|
|
// MinutesOfWeek: 0=Monday 0:00 o'clock...10079=Sunday 23:59
|
|
|
|
void rtc_getMonth(uint8_t *DayOfMonth, uint16_t *HoursOfMonth, uint16_t *MinutesOfMonth) const override;
|
|
// DayOfMonth: 1...31
|
|
// HoursOfMonth: 0 = 0:00o'clock of 1.day in month up to 743
|
|
// MinutesOfMonth:0 = 0:00o'clock of 1.day in month up to 44639
|
|
|
|
void rtc_getYear(uint16_t *DayOfYear, uint16_t *HoursOfYear, uint32_t *MinutesOfYear) const override;
|
|
// DayOfYear: 1...366 1= 1.Jan of this current year
|
|
// HoursOfYear: 0=1.Jan 0:00o'clock ...8783=31.12 23 o'clock
|
|
// MinutesOfYear: 0=1.Jan 0:00o'clock ...527039=31.12 23:59 o'clock
|
|
|
|
QString rtc_getTimStr(void) const override;
|
|
QString rtc_getDatStr(void) const override;
|
|
QString rtc_getTimDatStr(void) const override;
|
|
|
|
// UID
|
|
void dc_getUID8byte(uint8_t *buf8byteUid) const override;
|
|
QString dc_getUIDstr() const override;
|
|
uint64_t dc_getUIDnumber(void) const override;
|
|
|
|
|
|
// Analog inputs:
|
|
uint32_t dc_getTemperature(void) const override; // in Sax-Format 0...400 (0=-50,0°C 100=0,0°C 141=20,5°C 400=150,0°C)
|
|
QString dc_getTemperaturStr(void) const override;
|
|
|
|
uint32_t dc_getVoltage(void) const override; // in mV, 0...65,535V
|
|
QString dc_getVoltagStr(void) const override;
|
|
|
|
bool dc_mainFuseIsOk(void) const override;
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Level 3: digital outputs and simple switching of connected devices
|
|
// simple processes like flashing a led or open flap for 1s
|
|
// ------------------------------------------------------------------------------
|
|
|
|
void lock_switchContactPower(bool on) const override;
|
|
|
|
// Locks move until stop cmd (0)
|
|
uint8_t lock_switchUpperLock(uint8_t dir) const override;
|
|
// dir 0=off 1=up 2=down
|
|
uint8_t lock_switchLowerLock(uint8_t dir) const override;
|
|
// dir 0=off 1=up 2=down
|
|
void lock_switchVaultDoor(void) const override;
|
|
|
|
void coin_switchRejectMotor(uint8_t dir) const override;
|
|
|
|
void coin_rejectCoins(void) const override;
|
|
|
|
// LEDs
|
|
void led_switchLedIllumination(uint8_t on) const override;
|
|
void led_switchLedService(uint8_t on) const override;
|
|
void led_switchLedPaper(uint8_t on, uint8_t ton, uint8_t tof) const override;
|
|
void led_switchLedPinPad(uint8_t on, uint8_t ton, uint8_t tof) const override;
|
|
void led_switchLedStart(uint8_t on, uint8_t ton, uint8_t tof) const override;
|
|
void led_switchLedCoinbassin(uint8_t on, uint8_t ton, uint8_t tof) const override;
|
|
|
|
void fan_switchFan(bool on) const override;
|
|
void alarm_switchSiren(bool on) const override;
|
|
void bar_OpenBarrier(bool open) const override;
|
|
void ptu_switchWake(bool WAKEACTIVE) const override;
|
|
|
|
void prn_switchPower(bool on) const override;
|
|
|
|
void mif_readerOn(bool on) const override;
|
|
void shut_move(bool open) const override;
|
|
void esc_moveFlaps(uint8_t flap ) const override;
|
|
// 0: close both 1: open take-flap 2: open return
|
|
|
|
void mdb_switchPower(bool on) const override;
|
|
void mdb_switchWake(bool WAKEACTIVE) const override;
|
|
|
|
void mod_switchPower(bool on) const override;
|
|
void credit_switchPower(bool on) const override;
|
|
|
|
void aux_power(bool on) const override;
|
|
void aux_setUsage(uint8_t PinDirection) const override;
|
|
void aux_setOutputs(uint8_t PinIsHigh) const override;
|
|
|
|
|
|
void mod_switchWake(bool WAKEACTIVE) const override;
|
|
|
|
void credit_switchWake(bool WAKEACTIVE) const override;
|
|
|
|
|
|
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Level 3: digital inputs of connected devices
|
|
// ------------------------------------------------------------------------------
|
|
|
|
bool door_isContactPowerOn(void) const override;
|
|
|
|
uint8_t door_getSwitches(void) const override;
|
|
// retval: bit0: upper door 1: low door 2:vault door
|
|
|
|
bool door_isUpperDoorOpen(void) const override;
|
|
|
|
bool door_isLowerDoorOpen(void) const override;
|
|
|
|
bool vault_isVaultDoorOpen(void) const override;
|
|
|
|
uint8_t vault_getSwitches(void) const override;
|
|
// retval bit0: cash box, bit 1: bill box
|
|
|
|
bool vault_isCoinVaultIn(void) const override;
|
|
|
|
bool vault_isBillVaultIn(void) const override;
|
|
|
|
uint8_t door_getLocks(void) const override;
|
|
// retval bit0: upper lever is up
|
|
// bit1: upper lever is down
|
|
// bit2: lower lever is up
|
|
// bit3: lower lever is down
|
|
|
|
bool door_upperDoorIsLocked(void) const override;
|
|
|
|
bool door_upperDoorIsUnlocked(void) const override;
|
|
|
|
bool door_lowerDoorIsLocked(void) const override;
|
|
|
|
bool door_lowerDoorIsUnlocked(void) const override;
|
|
|
|
bool bar_optoIn1isOn(void) const override;
|
|
|
|
bool bar_optoIn2isOn(void) const override;
|
|
|
|
bool ptu_WakeINisActive(void) const override;
|
|
|
|
bool prn_isPrinterPowerOn(void) const override;
|
|
uint8_t prn_PrnFuseIsOk(void) const override;
|
|
//retval: 0: fuse blown 1: fuse OK 2:unknown as printer power is off
|
|
|
|
bool prn_readyINisActive(void) const override;
|
|
|
|
bool mif_cardIsAttached(void) const override;
|
|
bool mif_isMifarePowerOn(void) const override;
|
|
|
|
bool mdb_WakeINisActive(void) const override;
|
|
bool mdb_testIsmdbTxDon(void) const override;
|
|
bool mdb_isMdbPowerOn(void) const override;
|
|
|
|
bool coid_isAttached(void) const override;
|
|
bool coin_escrowIsOpen(void) const override;
|
|
|
|
bool aux_isAuxPowerOn(void) const override;
|
|
|
|
uint8_t aux_getAuxInputs(void) const override;
|
|
|
|
bool mod_isGsmPowerOn(void) const override;
|
|
|
|
bool cred_isCreditPowerOn(void) const override;
|
|
|
|
bool cash_getRejectMotorHomePos(void) const override;
|
|
|
|
uint8_t cash_getLowPaperSensor(void) const override;
|
|
// 0: Sensor sees paper 1: no paper 99: off
|
|
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Level1,2,3 RD request commands
|
|
// ------------------------------------------------------------------------------
|
|
|
|
// all read-requests can be sent manually by the following functions
|
|
// or automatically in background by: void hwapi::dc_autoRequest(bool on)
|
|
// in other words:
|
|
// if automatic-reading is on, then there's no need to send any of these commands,
|
|
// but it's allowed to send them in order to speed up the refreshing of the inputs
|
|
|
|
void request_DC2serialConfig() const override;
|
|
void request_DC2_HWversion() const override;
|
|
void request_DC2_SWversion() const override;
|
|
void request_DC2_condition() const override;
|
|
void request_DC2_UID() const override;
|
|
void request_DC2_TimeAndDate() const override;
|
|
void request_DC2_analogues() const override;
|
|
void request_DC2_digitalInputs() const override;
|
|
void request_DC2_digitalOutputs() const override;
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// the folowing device state requests are deploed only if device is powered up:
|
|
void request_PrinterHwState() const override;
|
|
void request_PrinterCurrentFonts() const override;
|
|
void request_PrinterStateComplete() const override;
|
|
|
|
void request_MifareReaderState() const override;
|
|
void request_MifareCardType() const override;
|
|
void request_MifareAtbType() const override;
|
|
void request_MifareID() const override;
|
|
void request_MifareData(uint8_t dataBlockNumber) const override;
|
|
// dataBlockNumber must be 0....11, returns 64byte of data
|
|
|
|
void request_MDB_Status() const override;
|
|
void request_MDB_lastResponse() const override;
|
|
void request_EMP_allParameters() const override;
|
|
void request_EMP_lastCoin() const override;
|
|
|
|
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Level 3: readback digital outputs of connected devices
|
|
// these functions are not needed for normal operation
|
|
// but can be used to test and verify conditions
|
|
|
|
// There are two options:
|
|
// 1) the important things like power-outputs and wake lines are
|
|
// measured at DC2-terminals (after transistors) and come as input to DC-board
|
|
// 2) others like Leds are read from µC-pins by DC-board
|
|
// ------------------------------------------------------------------------------
|
|
|
|
bool test_getDO_mdbRXtst(void) const override;
|
|
|
|
uint8_t lock_getDO_motors(void) const override;
|
|
// bit0: upper lock forward bit 1 backward
|
|
// bit2: lower lock forward bit 3 backward
|
|
|
|
uint8_t test_serialState(void) const override;
|
|
// test on-board signals for the serials
|
|
// serial drv on/off, Serial mux1, Serial mux2
|
|
bool test_serialIsOn(void) const override;
|
|
bool test_serialMux1isSetToPrinter(void) const override;
|
|
bool test_serialMux1isSetToModem(void) const override;
|
|
bool test_serialMux2isSetToCredit(void) const override;
|
|
bool test_serialMux2isSetToMifare(void) const override;
|
|
|
|
bool led_coinIsOn(void) const override;
|
|
bool led_frontIsOn(void) const override;
|
|
bool led_ticketIsOn(void) const override;
|
|
bool led_pinIsOn(void) const override;
|
|
bool led_StartIsOn(void) const override;
|
|
bool led_insideIsOn(void) const override;
|
|
|
|
bool fan_isOn(void) const override;
|
|
bool siren_isOn(void) const override;
|
|
bool bar_relayIsOn(void) const override;
|
|
bool ptu_WakeOutIsOn(void) const override;
|
|
|
|
bool aux_powerIsOn(void) const override;
|
|
|
|
bool coin_shutterIsOpen(void) const override;
|
|
bool coin_shutterTestOutput(void) const override;
|
|
|
|
uint8_t coin_escrowFlapOpened(void) const override;
|
|
// retval: 1:return flap is open 2:take flap is open 0:closed
|
|
|
|
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// Level4 ( Timer processes, device supervision by DC, processes with more then one devices
|
|
// WRITE
|
|
// ------------------------------------------------------------------------------
|
|
|
|
|
|
void sendDeviceSettings(uint8_t kindOfPrinter, uint8_t kindOfCoinChecker,
|
|
uint8_t kindOfMifareReader, uint8_t suppressSleep,
|
|
uint8_t kindOfModem, uint8_t kindOfCredit ) const override;
|
|
// enable hardware in device controller:
|
|
// kindOfPrinter: 0:off 1: GPT4672 (only this one implemented)
|
|
// kindOfCoinChecker: 0:off 1:EMP820 2:EMP900 3: C²_changer
|
|
// kindOfMifareReader: 0:off 1: SL025 (only this one implemented)
|
|
// suppressSleep: 0:sleep allowed 1: sleep surpressed for special reason
|
|
// kindOfModem: 0:off 1: ATB_Sunlink_LTE (not yet implemented)
|
|
// kindOfCredit: 0:off 1: cVendTopp 2:cVendPin (not yet implemented)
|
|
|
|
void request_ReadbackDeviceSettings() const override;
|
|
|
|
void readback_DeviceSettings(uint8_t *length, uint8_t *data) const override;
|
|
// refer to DC2 manual for exact content
|
|
// state 5.5.21: byte[0]=kindOfPrinter byte[1]=kindOfCoinChecker
|
|
// byte[2]=kindOfMifarereadr byte[3]=suppress sleep mode
|
|
// byte[4]=kindOfModem byte[5]=kind of cc terminal
|
|
|
|
uint8_t emp_returnLastCoin(uint16_t *value, uint8_t *signal) const override;
|
|
// use for changer
|
|
|
|
void sendMachineID(uint16_t customerNr, uint16_t machineNr,
|
|
uint16_t borough, uint16_t zone,
|
|
uint16_t alias, char *location) const override;
|
|
|
|
void request_ReadbackMachineID() const override;
|
|
|
|
void readback_machineIDdata(uint8_t *length, uint8_t *data) const override;
|
|
// state 5.5.21: byte[0,1]=customer number byte[2,3]=machine number
|
|
// byte[4,5]=borough byte[6,7]=zone byte[8,9]=alias name
|
|
// byte[10...41]=location
|
|
|
|
|
|
// Locks stops automatically at end switch or by timeout
|
|
uint8_t lock_openUpperDoor(void) const override;
|
|
uint8_t lock_closeUpperDoor(void) const override;
|
|
|
|
uint8_t lock_openLowerDoor(void) const override;
|
|
uint8_t lock_closeLowerDoor(void) const override;
|
|
|
|
|
|
void shut_openOnce(void) const override;
|
|
// and close automatic after shutter time
|
|
|
|
void shut_openForCoin(bool start) const override;
|
|
// open flap if coin is attached
|
|
// once process is started it runs until stop command
|
|
|
|
void shut_sendOpeningTime(uint16_t timeIn_ms ) const override;
|
|
// after this time without retrigger the flap is closed
|
|
|
|
void esc_takeMoney(void) const override;
|
|
// and close automatically after escrow time (1s)
|
|
|
|
void esc_returnMoney(void) const override;
|
|
// and close automatically after escrow time (1s)
|
|
|
|
void mif_creatAtbCard(uint8_t cardType) const override;
|
|
|
|
|
|
// ------------------------------------------------------------------------------
|
|
// read response from DC2 (input data)
|
|
// ------------------------------------------------------------------------------
|
|
|
|
uint8_t mif_returnReaderStateAndCardType(uint8_t *buf, uint8_t maxBufferSize) const override;
|
|
// retval 0=OK 1=error host buffer too small
|
|
/* data description, new fast version:
|
|
byte 0= still the same: current read state:
|
|
0=power off 1=reader-fault 2=ready
|
|
3=just reading 4=read complete
|
|
5=read partial, removed too early
|
|
6=state unknown
|
|
|
|
byte 1: reader state 1=ok 0=nok
|
|
byte 2: card preent (0,1)
|
|
byte 3: card selected (0)
|
|
byte 4: card type: 0...5
|
|
byte 5: card allowed (0=no 1=MifareClassic 1k or 4k)
|
|
byte 6: CardSize: 1 or 4 (kB)
|
|
byte 7: length of UID 4 or 7 (byte)
|
|
*/
|
|
|
|
bool mif_readerIsOK(void) const override;
|
|
|
|
bool mif_cardAttached(void) const override;
|
|
|
|
uint8_t mif_readResult(void) const override;
|
|
// result: 0: unknown or still in progress
|
|
// 1: card read successful
|
|
// 2: reading error
|
|
|
|
QString mif_cardUID(void) const override;
|
|
|
|
uint8_t mif_getCardDataDec(uint8_t blkNr, uint8_t *buf, uint8_t maxBufferSize) const override;
|
|
|
|
QString mif_getCardDataStr(uint8_t blockNumber) const override;
|
|
// with blockNumber=0...11
|
|
|
|
|
|
|
|
|
|
// ----------------------------------------------------------------------------------------------------------
|
|
// --------------------------------------------- PRINTER ----------------------------------------------------
|
|
// ----------------------------------------------------------------------------------------------------------
|
|
|
|
// read printer condition and settings
|
|
|
|
uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const override;
|
|
// retval: status byte
|
|
// byte 0 = 0: prnter OK, >0: error
|
|
// bit0: paper low 1: no paper 2: temperature error
|
|
// 3: head open 4: paper jam in cutter
|
|
// 6: no response 7: bad response from printer
|
|
// and return struct "Tprn_hw_state"
|
|
|
|
bool prn_isUpAndReady(void) const override;
|
|
// true: printer is powered, serial is ok, no error, printer is connected and resonding
|
|
|
|
void prn_getCurrentFontSetting(struct Tprn_currentSettings *prn_fonts) const override;
|
|
|
|
|
|
// send Commands to printer:
|
|
|
|
void prn_sendText(QByteArray *buf) const override;
|
|
// up to 1280 bytes
|
|
|
|
void prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3) const override;
|
|
// send three byte through to printer, see printers manual
|
|
|
|
void prn_sendPrnEscCmd(uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4) const override;
|
|
// send four byte through to printer, see printers manual
|
|
|
|
|
|
void prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density, uint8_t alignment, uint8_t orientation) const override;
|
|
// send 5 byte: byte 0,1: speed 5...250 mm/s
|
|
// byte2: density 0....(25)....50
|
|
// byte3: alignment 'l', 'c', 'r' = left, center, right
|
|
// byte4: orientation 0, 90, 180 = 0°, 90°, 180° rotation (by now not supported!)
|
|
// not batched! don't use twice within 100ms
|
|
|
|
void prn_movePaper(uint8_t wayInMm, uint8_t direction) const override;
|
|
//direction: 1=forward 2=backward
|
|
//
|
|
void prn_setFonts(uint8_t font, uint8_t size, uint8_t width, uint8_t height) const override;
|
|
// font = kind of font 5...11 (0..22)
|
|
// size = 6...20, 9..9: too tiny 10: small ...12 = normal size ...20=huge
|
|
// width: 0...4 0=1x 1=2x 2=4x (huge!) 3=8x 4=16x (3,4 make no sense)
|
|
// heigth: 0...7 = 1x...8x only 0,1,2,(3) make sense
|
|
|
|
void prn_setLetters(uint8_t bold, uint8_t invers, uint8_t underlined) const override;
|
|
// bold: 0/1
|
|
// invers: 0/1
|
|
// underlined: 0/1
|
|
|
|
void prn_cut(uint8_t kindof) const override;
|
|
// kindof: 1=full cut 2=partial cut 3=eject (5xLF + full cut)
|
|
|
|
void prn_newLine(uint8_t nrOfLines) const override;
|
|
|
|
void prn_printCompleteFontTable(void) const override;
|
|
|
|
|
|
void prn_printBarcode(uint8_t kindOf, uint8_t withText, uint8_t offset, uint8_t rotation, uint8_t dataLeng, uint8_t *data) const override;
|
|
// kind of barcode: 0=Code39 1=Code128 2=EAN13 3= 2/5interleaved 4=UPC-A 5=EAN8
|
|
// withText: print readable text below
|
|
// offset: move by pixel from left border
|
|
// rotation
|
|
// dataLeng in byte
|
|
|
|
void prn_sendQRdata(QByteArray *buf) const override;
|
|
// maximal 150 alphanummeric bytes
|
|
|
|
void prn_printQRcode(void) const override;
|
|
// QRcode may have 1...150 alphanummeric data, must be transfered in advance
|
|
|
|
|
|
void prn_printLogo(uint8_t nrOfLogo, uint8_t offset ) const override;
|
|
// nrOfLogo: 1..4 in flash 5...8 in Ram
|
|
// offset: in mm form left border
|
|
|
|
|
|
|
|
// .........................................................
|
|
// Parking Ticket (print-out document) designer TD
|
|
// .........................................................
|
|
|
|
// Predefine document Layout (e.g. parking ticket) in advance and stroe it for quick and easy use
|
|
// in opposite to the above "single" commands you need only one or a few commands at vending time.
|
|
// Stored text is just send to printer once the printing command is issued
|
|
// stored commands within the text are interpreted and executed right at the place (in ticket) they are
|
|
// example: start bold, <text in bold>, stop bold
|
|
// Predefinition of up to 16 ticket Layouts is possible, 0...1280 byte each
|
|
// Number 0..15, al keept non-volatile
|
|
// up to 8 dynamic values can be defined in the template ("print val3 here") and will be sent with printing command
|
|
// example: print current time at this point (the time of printing not the storage time!!)
|
|
|
|
void pri_startTicketDesign(void) const override;
|
|
// start for every new printer document, reseting collecting buffer
|
|
|
|
// all further functions write/append text, numbers and command to the ticket-buffer, up to 1278 bytes allowed
|
|
// return val of the appending functions: true=ok false=too long, buffer full
|
|
|
|
int pri_TD_getCurrentSize(void) const override;
|
|
// retval: 0...1278
|
|
|
|
bool pri_TD_addText(QByteArray text) const override;
|
|
// example: pri_TD_addText("Hello") const override;
|
|
// example: pri_TD_addText(tempStr) const override;
|
|
// retval: true=ok false=too long, buffer full
|
|
|
|
bool pri_TD_addValue(int val) const override;
|
|
// +/- 0...2^(31)
|
|
|
|
bool pri_TD_addNewLine(void) const override;
|
|
|
|
bool pri_TD_addSign(char sign) const override;
|
|
// example: '.' ' ' 0x20 'W' '$'
|
|
|
|
bool pri_TD_addCommand(char group, char attribute, char p1, char p2, char p3, char p4, char p5) const override;
|
|
// always add 8 byte to the ticket layout: ESC & group & attribute & parameter1...5
|
|
/* complete list of possible commands:
|
|
group 50 : paper
|
|
attribute 10 : move forward
|
|
p1: wayInMm p2: direction
|
|
attribute 11 : cut
|
|
p1: kind of, 1=full 2=partial, 3=eject
|
|
attribute 12 : new line(s)
|
|
p1: nr of lines 1...100
|
|
|
|
group 51 : fonts
|
|
attribute 10 : kind of font see description above
|
|
p1: 0...8
|
|
attribute 11 : font size
|
|
p1: 6...20
|
|
attribute 12 : font width
|
|
p1: 0...4
|
|
attribute 13 : font heigth
|
|
p1: 0...7
|
|
attribute 14 : switch bold print on/off
|
|
p1: 0=off 1=on
|
|
attribute 15 : switch invers print on/off
|
|
p1: 0=off 1=on
|
|
attribute 16 : switch underlined print on/off
|
|
p1: 0=off 1=on
|
|
|
|
group 52 : print graphics
|
|
attribute 10 : print barcode with dynamic data 6 and 7
|
|
p1...p5 = kindOf, withText, offset, rotation, dataLeng, see description above
|
|
attribute 11 : print QRcode with preset data
|
|
|
|
attribute 12 : print Logo
|
|
p1=nrOfLogo, p2=offset
|
|
|
|
group 53 : print dynamics
|
|
attribute 10 :
|
|
p1: 1...8 = print dynData 0..7 at this place
|
|
|
|
*/
|
|
|
|
char prn_clearDocument(uint8_t documentNumber) const override;
|
|
// clear memory buffer for ONE document
|
|
// function takes a second! don't send right before "store doc"
|
|
|
|
bool prn_store_Document(uint8_t documentNumber ) const override;
|
|
|
|
// send the predefined Layout (generated with above TD functions) to DeviceController to save
|
|
// documentNumber=0...15
|
|
// maximal 1280 bytes each
|
|
// allowed: 0x20...0xFF, 0x0A, 0x0C, 0x1B (LF, CR, Esc)
|
|
// 0x1B=start of embedded command (next 7bytes = command)
|
|
|
|
// with a print command a set of 8 dynamic strings can be sent
|
|
// the place in the ticket layout is predefined (already in DC memory)
|
|
// the dynamics are first calculated at printing time
|
|
|
|
bool prn_printDocument(uint8_t documentNumber, struct T_dynDat *dynTicketData) const override;
|
|
|
|
|
|
|
|
|
|
|
|
// ----------------------------------------------------------------------------------------------------------
|
|
// --------------------------------------------- MDB Bus ----------------------------------------------------
|
|
// ----------------------------------------------------------------------------------------------------------
|
|
|
|
//void mdb_switchPower(bool on) const override; defined above
|
|
//void mdb_switchWake(bool WAKEACTIVE) const override; defined above
|
|
// bool mdb_WakeINisActive(void) const override;
|
|
// bool mdb_testIsmdbTxDon(void) const override;
|
|
// bool mdb_isMdbPowerOn(void) const override;
|
|
// void request_MDB_Status() const override;
|
|
// void request_MDB_lastResponse() const override;
|
|
|
|
|
|
void mdb_sendBusReset(void) const override;
|
|
|
|
void mdb_sendCommand(uint8_t toMdbDevice, uint8_t mdbCommand) const override;
|
|
// send one bus command directly over mdb bus, refer to mdb manual for commands
|
|
// this command is not needed in normal operation, just for new or special things
|
|
|
|
void mdb_sendMessage(uint8_t toMdbDevice, uint8_t mdbCommand, uint8_t nrOfData, uint8_t *dataBuffer) const override;
|
|
// nrOfData = sizeOf(dataBuffer) maximal 34 byte according mdb specs
|
|
// same as mdb_sendCommand, just with data
|
|
|
|
bool mdb_busIsReadyToWork() const override;
|
|
|
|
bool mdb_deviceVoltageOK() const override;
|
|
|
|
bool mdb_busVoltageOk() const override;
|
|
|
|
uint8_t mdb_getLastDeviceResponse(uint8_t *fromDevice, uint8_t *lastRequest,
|
|
uint8_t *responseLength, uint8_t *responseBuffer) const override;
|
|
// fromDevice: device nr from which data was requested 0,1,2,3
|
|
// lastRequest: sent mdb command
|
|
// responseLength: nr of payload data (after mdb-ack) 0...34
|
|
// responseBuffer holds payload data (answer from mdb device)
|
|
// return val: mdb result of this request: 1=got ACK 2=got 3xNAK 3=no or bad response 4:got Data (after ACK)
|
|
|
|
|
|
|
|
|
|
|
|
// ----------------------------------------------------------------------------------------------------------
|
|
// ---------------------------------- Electronic Coin Validator EMP -----------------------------------------
|
|
// ----------------------------------------------------------------------------------------------------------
|
|
|
|
|
|
void emp_sendSettings(uint16_t coinAcceptance, uint8_t tokenChannel, uint16_t *coinDenomination ) const override;
|
|
// coinAcceptance: bit0=coin1 (lowest donomination) bit15=coin16 bitH=accept bit L = deny coin (no validation)
|
|
// tokenChannel 0...31: if this signal comes from emp then a token was inserted
|
|
// coinDenomination = array of 16 coin values (e.g. 5, 10, 20...)
|
|
|
|
void emp_pollingOnOff(uint8_t on) const override;
|
|
|
|
void emp_startCoinAcceptance(void) const override;
|
|
|
|
void emp_stopCoinAcceptance(void) const override;
|
|
|
|
void emp_getAllParameters(struct T_emp *emp) const override;
|
|
// see struct in hwapi.h
|
|
// usage example:
|
|
// hwapi *HWaccess const override;
|
|
// HWaccess = new hwapi() const override;
|
|
// struct T_emp myEmp const override;
|
|
// HWaccess->emp_getAllParameters(&myEmp) const override;
|
|
// readval=myEmp.pollingRunning const override;
|
|
|
|
uint8_t emp_chkIfCoinInserted(void) const override;
|
|
// retval: 0...16 coins left in FIFO
|
|
|
|
void emp_getNewCoinRecord(uint8_t *valid, uint8_t *signal, uint8_t *error, uint16_t *value) const override;
|
|
// with every call ONE coin is taken out of FIFO and pointer decremented
|
|
// valid: should be 1
|
|
// signal: comes right from coin checker, 0...15 (0=first programmed coin type) 0xFF=no signal
|
|
// error: was reported from EMP as dynamic signal right after coin insertion (instead of
|
|
// coin signal), example: 3=unknown coin 4=coin is blocked by host. 0xFF=no error
|
|
// value: of the coin. Depends on parameter "coinDenomination" in function "emp_sendSettings"
|
|
// if coinDenomination[coin 0..15] = 0 then the value programmed in coin checker is taken
|
|
// if coinDenomination > 0 then this value is taken.
|
|
// Useful in case of two currencies (adapt to local currency) or for token.
|
|
|
|
// function gives more details as "emp getLastCoin()" but "emp getLastCoin()" is easier to use
|
|
|
|
// alternativ to emp_getNewCoinRecord( ):
|
|
uint8_t emp_giveLastCoin(uint16_t *value, uint8_t *signal) const override;
|
|
// retval: 0: NO coin stored 1: valid coin 2: got wrong coin or coin denied
|
|
// value: if retval1: value of the coin if reval=2: error number
|
|
// 0xFF means NO error or NO signal (as 0 is a valid error/signal)
|
|
// signal: channel nr reported from checker 0...15
|
|
|
|
|
|
|
|
|
|
|
|
// neu, 25.3.23
|
|
|
|
void bl_rebootDC(void) const override;
|
|
|
|
void bl_startBL(void) const override;
|
|
bool bl_checkBL(void) const override;
|
|
bool bl_isUp(void) const override;
|
|
// return true is bl is up and running
|
|
// also initializes "sendFile"
|
|
|
|
void bl_sendAddress(uint16_t blockNumber) const override;
|
|
// send start address, nr of 64byte-block, start with 0
|
|
// will be sent only for folling block-numbers:
|
|
// 0, 1024, 2048, 3072 and 4096, so basically every 64kByte
|
|
|
|
uint8_t bl_wasSendingAddOK(void) const override;
|
|
// return val: 0: no response by now 1:error 10: OK
|
|
|
|
void bl_openBinary(void) const override;
|
|
|
|
void bl_sendDataBlock(uint8_t length, uint8_t *buffer) const override;
|
|
// send 64 byte from bin file
|
|
|
|
void bl_sendLastBlock(void) const override;
|
|
|
|
uint8_t bl_wasSendingDataOK(void) const override;
|
|
// return val: 0: no response by now 1:error 10: OK
|
|
|
|
void bl_stopBL(void) const override;
|
|
|
|
|
|
// Bootlader, not used or obsolete
|
|
//bool bl_isDiagAvailable(void) const override;
|
|
//QString dc_getDiagText(void) const override;
|
|
//void bl_startSending(void) const override;
|
|
//void bl_sendFile(void) const override;
|
|
|
|
|
|
|
|
// neu, ab 6.4.23
|
|
// bereits vorhanden, nochmal getestet/verbessert:
|
|
// void led_switchLedPaper(uint8_t on, uint8_t ton, uint8_t tof) const override;
|
|
// void alarm_switchSiren(bool on) const override;
|
|
|
|
// void mif_readerOn(bool on) const override;
|
|
// bool mif_cardIsAttached(void) const override;
|
|
|
|
// void shut_move(bool open) const override;
|
|
// void esc_moveFlaps(uint8_t flap ) const override;
|
|
// 0: close both 1: open take-flap 2: open return
|
|
// void shut_openOnce(void) const override;
|
|
// and close automatic after shutter time
|
|
// void shut_openForCoin(bool start) const override;
|
|
// open flap if coin is attached
|
|
// once process is started it runs until stop command
|
|
// void shut_sendOpeningTime(uint16_t timeIn_ms ) const override;
|
|
// after this time without retrigger the flap is closed
|
|
// void esc_takeMoney(void) const override;
|
|
// and close automatically after escrow time (1s)
|
|
// void esc_returnMoney(void) const override;
|
|
// and close automatically after escrow time (1s)
|
|
|
|
// void prn_switchPower(bool on) const override;
|
|
// void prn_sendText(QByteArray *buf) const override;
|
|
// up to 1280 bytes
|
|
|
|
// uint8_t rtc_setDateTime(void) const override;
|
|
// send system time
|
|
|
|
//void sendDeviceSettings(uint8_t kindOfPrinter, uint8_t kindOfCoinChecker,
|
|
// uint8_t kindOfMifareReader, uint8_t suppressSleep,
|
|
// uint8_t kindOfModem, uint8_t kindOfCredit ) const override;
|
|
|
|
//void sendMachineID(uint16_t customerNr, uint16_t machineNr,
|
|
// uint16_t borough, uint16_t zone,
|
|
// uint16_t alias, char *location) const override;
|
|
|
|
/*
|
|
uint8_t emp_getInsertedCoinSignal(void) const override;
|
|
// can be called one time after each coin
|
|
// emp_chkIfCoinInserted() must be called before!
|
|
|
|
uint16_t emp_getInsertedCoinValue(void) const override;
|
|
// can be called one time after each coin
|
|
// emp_chkIfCoinInserted() must be called before!
|
|
|
|
uint8_t emp_getCoinError(void) const override;
|
|
// can be called one time after each coin
|
|
// emp_chkIfCoinInserted() must be called before!
|
|
*/
|
|
|
|
bool rtc_setTimeDateDirect(struct Trtc_DateTime *DateTime) const override;
|
|
// return true if successful. could fail if more the 8 commands are waiting
|
|
|
|
bool rtc_getExtendedTime(uint8_t *leng, uint8_t *data) const override;
|
|
|
|
bool sys_runCompleteTest(void) const override;
|
|
// warning: lasts 20s in one pace
|
|
|
|
bool sys_ready4sending(void) const override;
|
|
// return true if a Json-file can be sent
|
|
|
|
bool sys_sendJsonFileToDc(uint8_t kindOfFile, uint8_t nrOfTemplate, uint8_t *content ) const override;
|
|
// kindOfFile: 1=config, 2=device, 3=cash, 4=serial, 5=time, 6=printer
|
|
// nrOfTemplate=1...32 if kindOfFile==6
|
|
// content = content of the Json file, max 800byte ascii signs
|
|
// file is 0-terminated!
|
|
// return false if sending is not possible, wait a second
|
|
|
|
bool prn_sendDynamicPrnValues(uint8_t *dynPrnVal ) const override;
|
|
// dynPrnVal = array of 8 Variables with 8 byte each, come as ascii string
|
|
// like: char prn_dynPrnVal[8][8];
|
|
// return true if sending, false if cmd-stack is full
|
|
|
|
bool prn_printTemplate(uint8_t nrOftemplate) const override;
|
|
// print one of the templates loaded by Json prior
|
|
// nr = 1..32
|
|
// return true if sending, false if cmd-stack is full
|
|
|
|
void log_getHoldAccountNumbers(uint32_t *accNr ) const override;
|
|
// returns all acc nrs of the backuped vault records
|
|
// use: uint32_t backupedAccNumbers[8]
|
|
|
|
bool log_selectVaultRecord(uint16_t accountNr ) const override;
|
|
// return true if sending, false if cmd-stack is full
|
|
|
|
//request, isAvailable
|
|
void log_getVaultRecord(struct T_vaultRecord *retVR) const override;
|
|
// which was selected by: log_selectVaultRecord()
|
|
// to be forwarded to Ismas
|
|
|
|
bool prn_printAccountReceipt(void) const override;
|
|
// return true if sending to DC OK, false if cmd-stack is full
|
|
|
|
bool prn_printTestTicket(void) const override;
|
|
// return true if sending to DC OK, false if cmd-stack is full
|
|
|
|
bool cash_startPayment(uint16_t amount) const override;
|
|
|
|
bool cash_cancelPayment(void) const override;
|
|
// and return coins
|
|
|
|
bool cash_stopPayment(void) const override;
|
|
// and keep coins in escrow
|
|
|
|
uint32_t getInsertedAmount(void) const override;
|
|
|
|
uint16_t getLastInsertedCoin(void) const override;
|
|
|
|
bool getAllInsertedCoins(uint16_t *types, uint16_t *values) const override;
|
|
// alle bei diesem Verkauf eingeworfenen Münzen sind gespeichert, max 64
|
|
|
|
|
|
// after ticket/goods issue:
|
|
bool vend_success(void) const override;
|
|
// conclude payment process, encash all inserted coins to vault. Printing was successful
|
|
// if possible return change
|
|
|
|
bool vend_failed(void) const override;
|
|
// conclude payment process and return all inserted coins
|
|
|
|
|
|
|
|
|
|
|
|
uint8_t mif_getCardType(QString cardholder) const override;
|
|
// return 1,2,3,4 = upper, lower access card, printer test, coin test
|
|
// cardholder: 7byte Name-String
|
|
|
|
uint64_t sys_getWakeSource(void) const override;
|
|
// retval: 6 bytes, bit coded, 1=event keeps DC awake
|
|
|
|
//void sys_getDeviceConditions(struct T_moduleCondition *devCond) const override;
|
|
void sys_getDeviceConditions(uint8_t *leng, uint8_t *data) const override;
|
|
|
|
//void sys_getDynMachineConditions(struct T_dynamicCondition *dynMachCond) const override;
|
|
void sys_getDynMachineConditions(uint8_t *leng, uint8_t *data) const override;
|
|
|
|
|
|
|
|
|
|
|
|
private:
|
|
void sub_storeSendingText(QByteArray *buf) const;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
};
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
// Coin checker and changer mdb4.2 / section 5
|
|
// Level 2 Commands (predefined device msg acc. mdb manual and auto-poll)
|
|
uint8_t mdb_coin_startPolling(bool on) const override; // send ether one command (from list below)
|
|
// or a poll command in the proper polling grid (e.g. every 100ms)
|
|
uint8_t mdb_coin_reset() const override;
|
|
uint8_t mdb_coin_setup() const override;
|
|
uint8_t mdb_coin_tubestatus() const override;
|
|
uint8_t mdb_coin_pollManually(void) const override;
|
|
uint8_t mdb_coin_type(uint16_t coinEnable, uint16_t dispenseEnable) const override;
|
|
uint8_t mdb_coin_dispense(uint8_t disp) const override;
|
|
uint8_t mdb_coin_expansion(uint8_t subCmd, uint8_t send[32]) const override;
|
|
uint8_t mdb_coin_getResponse(void) const override;
|
|
// 0: no response 1: got ACK 2: got NAK 3 got ACK with additional data
|
|
uint8_t mdb_coin_getDataLen(void) const override;
|
|
// return nr of byte received from any mdb device
|
|
uint8_t mdb_coin_getData(uint8_t *mdb_data, uint8_t maxBufferSize) const override;
|
|
|
|
|
|
|
|
// Bill validator // section 6
|
|
uint8_t mdb_bill_startPolling(bool on) const override;
|
|
uint8_t mdb_bill_reset() const override;
|
|
uint8_t mdb_bill_setup() const override;
|
|
uint8_t mdb_bill_security(uint16_t secLevel) const override;
|
|
uint8_t mdb_bill_pollManually(void) const override;
|
|
uint8_t mdb_bill_billType(uint16_t billEnable, uint16_t escrowEnable) const override;
|
|
uint8_t mdb_bill_escrow(uint8_t action) const override;
|
|
uint16_t mdb_bill_stacker(void) const override;
|
|
uint8_t mdb_bill_expansion(uint8_t subCmd, uint8_t send[32]) const override;
|
|
uint8_t mdb_bill_gotPollResponse(void) const override;
|
|
// 0: no response 1: got ACK 2: got NAK 3 got ACK with additional data
|
|
uint8_t mdb_bill_getDataLen(void) const override;
|
|
uint8_t mdb_bill_getPollData(uint8_t *mdb_data, uint8_t maxBufferSize) const override;
|
|
|
|
|
|
|
|
// Level 3 Commands - all cash devices are used together and automatically
|
|
// -->easiest way to use
|
|
|
|
// setting up payment:
|
|
uint8_t cash_getAcceptance(struct Tcash_state *cash_state) const override;
|
|
// return device specific parameters, (e.g. which tubes are installed)
|
|
// to be requested before/after payment
|
|
uint8_t cash_setMaxReturn(uint32_t amount) const override; // Security Limit
|
|
uint8_t cash_setMaxAcceptance(uint32_t amount) const override; // can pay up to this amount
|
|
// example: set to 12€ (=max price step), then the 3rd 5€ bill would be kept in escrow
|
|
// or with coins: max. insertable = 13,95€ (11,95€ is still <12€, plus a 2€-coin)
|
|
uint8_t cash_setCoinsToBeAccepted(uint16_t coinVal[2][16]) const override;
|
|
// up to 16 coins per currency in one or two currencies
|
|
// [0]=first currency, e.g. Huf [1]=2nd, like euros
|
|
uint8_t cash_setBillsToBeAccepted(uint32_t billVal[2][16]) const override;
|
|
uint8_t cash_setOpeningTime(uint16_t opentime_100ms) const override; // coin slot is opening/closing automatically
|
|
uint8_t cash_setWaitForLastCoinTime(uint16_t lastCoinTime_100ms) const override;
|
|
// while this time coin/bill aceptance is still active after "disable payment" command
|
|
uint8_t cash_getAllsettings(struct TcashSettings cashSettings) const override;
|
|
// return all above set own parameters
|
|
|
|
// starting payment
|
|
uint8_t cash_powerUp(bool on) const override; // power up/down devices (bill takes up to 3s)
|
|
uint8_t cash_enablePayment(bool start) const override; // start/stop accepting bills and coins
|
|
|
|
// running payment
|
|
bool gotNewCoinBill(void) const override; // true on every insertion, only once
|
|
uint8_t cash_getInserted(struct Tcash_pay *payment_state) const override;
|
|
|
|
// finishing payment
|
|
uint8_t cash_coinEscrowTake(void) const override;
|
|
uint8_t cash_coinEscrowReturn(void) const override;
|
|
uint8_t cash_return(uint32_t amount) const override;
|
|
*/
|
|
|
|
|
|
/*
|
|
uint8_t cc_setCondition(uint16_t chgCmd) const override; // e.g. change to state registered, sleep, open, off....
|
|
uint16_t cc_getCondition(void) const override; // e.g. now socket open
|
|
bool cc_sendBufferFree(void) const override; // sending allowed (before writing) and sending finished (after writing)
|
|
uint8_t cc_sendDataBlk(uint16_t len, uint8_t *buf) const override;
|
|
void cc_wantReadData(uint16_t nrOfData) const override; // start reading
|
|
uint16_t cc_gotData(void) const override; // return nr of received bytes
|
|
uint8_t cc_loadDataBlk(uint16_t len, uint8_t *buf) const override;
|
|
uint8_t cc_getWorkFlow(void) const override;
|
|
// off, activated, gotStart_wait4card, wait4pin, gotPin, callingBank, CardAccepted.....
|
|
uint8_t cc_setupSerial(struct TserialParams serialParameter) const override;
|
|
uint8_t cc_getCurrentSerialSettings(struct TserialParams *serialParameter) const override;
|
|
*/
|
|
|
|
|
|
/*
|
|
|
|
struct TcashSettings
|
|
{
|
|
uint32_t MaxReturnAmount const override;
|
|
uint32_t MaxAcceptAmount const override;
|
|
uint32_t CoinsAcceptedCur[2][16] const override;
|
|
uint32_t BillsAcceptedCur[2][16] const override;
|
|
uint32_t availableReturnAmount const override;
|
|
|
|
} const override;
|
|
|
|
|
|
struct Tcc_hw_state
|
|
{
|
|
bool powerRdBk const override; // prn pwr is on
|
|
bool rsSwOk const override; // serial switch (printer or modem) is set to CreditCard (iUC)
|
|
bool rsDrvOk const override; // RS232 converter for PTU, Printer and Modem in on
|
|
uint8_t HwState const override; // idle, off, on, ready
|
|
bool gotAnswer const override; // cable OK?
|
|
uint8_t moduleType const override;
|
|
uint8_t protocolType const override;
|
|
|
|
} const override;
|
|
|
|
|
|
*/
|
|
|
|
|
|
/*
|
|
// not yet implemented
|
|
uint8_t mod_power(bool on) const override;
|
|
uint8_t mod_getHwState(struct Tmod_hw_state *mod_hw_state) const override;
|
|
uint8_t mod_setCondition(uint16_t chgCmd) const override; // e.g. change to state registered, sleep, open, off....
|
|
uint16_t mod_getCondition(void) const override; // e.g. now socket open
|
|
bool mod_sendBufferFree(void) const override; // sending allowed (before writing) and sending finished (after writing)
|
|
uint8_t mod_sendDataBlk(uint16_t len, uint8_t *buf) const override;
|
|
void mod_wantReadData(uint16_t nrOfData) const override; // start reading
|
|
uint16_t mod_gotData(void) const override; // return nr of received bytes
|
|
uint8_t mod_loadDataBlk(uint16_t len, uint8_t *buf) const override;
|
|
uint8_t mod_setupSerial(struct TserialParams serialParameter) const override;
|
|
uint8_t mod_getCurrentSerialSettings(struct TserialParams *serialParameter) const override;
|
|
|
|
// Credit Card Terminal:
|
|
uint8_t cc_power(bool on) const override;
|
|
uint8_t cc_getHwState(struct Tcc_hw_state *cc_hw_state) const override;
|
|
|
|
*/
|
|
|