set version to 1.3.10: remove timeout on opkg-commands. tested download of DC2C_cash.conf file.

update-process without showing a wrong UPDATE-SUCCESS.

OnDemandUpdatePTU.pro

@@ -15,39 +15,53 @@ DEFINES += QT_DEPRECATED_WARNINGS
 # In order to do so, uncomment the following line.
 # You can also select to disable deprecated APIs only up to a certain version of Qt.
 #DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0x060000    # disables all the APIs deprecated before Qt 6.0.0
-VERSION=1.3.4
+
+# 1.3.6 :   Do not update device-controller/json files, but have the library
+#           (in a later step) do that.
+#           Fixed sending messages to ISMAS.
+#           Always execute contents of opkg_commands-file (even if there are no
+#           changes).
+# 1.3.7 :   Wait forever for git-commands to finish in QProcess executing such
+#           a command.
+# 1.3.8 :   Remove accessing opkg_commands under file-system-path /etc/psa_update.
+#           Activate download of json-configuration files.
+# 1.3.9 :   Fix sendLastVersion: use configured branch and not master branch in
+#               git show origin/master -s --format="c=%h m=%s d=%cI"    ==>
+#               git show origin/zg1/zone1 -s --format="c=%h m=%s d=%cI"
+#           Use dynamic values for os-release and apism-version when sending
+#           last version info.
+# 1.3.10:   Fix premature killing opkg-commands: detected timeout of 100s was
+#           too small when updating apism.
+#           Fix display of UPDATE_SUCCESS when opkg_command fails. Detected when
+#           updating apsim failed.
+
+win32 {
+    BUILD_DATE=$$system("date /t")
+    BUILD_TIME=$$system("time /t")
+} else {
+    BUILD_DATE=$$system("date +%d-%m-%y")
+    BUILD_TIME=$$system("date +%H:%M:%S")
+}
+
+VERSION="1.3.10"
 
 INCLUDEPATH += plugins
 
-CONFIG += c++17 console
+CONFIG += c++17
 # CONFIG -= app_bundle
 
 DEFINES+=APP_VERSION=\\\"$$VERSION\\\"
+DEFINES+=APP_BUILD_DATE=\\\"$$BUILD_DATE\\\"
+DEFINES+=APP_BUILD_TIME=\\\"$$BUILD_TIME\\\"
 
 QMAKE_CXXFLAGS += -g
 QMAKE_CXXFLAGS += -Wno-deprecated-copy
 
-# custom target for 'git subtree'
-# subtree.target = subtree
-# subtree.commands = git subtree add --prefix DCPlugin https://git.mimbach49.de/GerhardHoffmann/DCPlugin.git master --squash
-# subtree.depends =
-# QMAKE_EXTRA_UNIX_TARGETS += subtree
-
-# ! exists(DCPlugin) {
-#     $$system("git subtree add --prefix DCPlugin https://git.mimbach49.de/GerhardHoffmann/DCPlugin.git master --squash")
-# } else {
-    # $$system("git subtree pull --prefix DCPlugin https://git.mimbach49.de/GerhardHoffmann/DCPlugin.git master --squash")
-# }
-
-# You can make your code fail to compile if it uses deprecated APIs.
-# In order to do so, uncomment the following line.
-#DEFINES += QT_DISABLE_DEPRECATED_BEFORE=0x060000    # disables all the APIs deprecated before Qt 6.0.0
-
 contains( CONFIG, PTU5 ) {
     greaterThan(QT_MAJOR_VERSION, 4): QT += serialport
     CONFIG += link_pkgconfig
     lessThan(QT_MAJOR_VERSION, 5):   PKGCONFIG += qextserialport
-    QMAKE_CXXFLAGS += -std=c++17   # for GCC >= 4.7
+    QMAKE_CXXFLAGS += -O2 -std=c++17   # for GCC >= 4.7
     QMAKE_CXXFLAGS += -Wno-deprecated-copy
     ARCH = PTU5
     DEFINES+=PTU5
@@ -107,18 +121,6 @@ HEADERS += \
 FORMS += \
     mainwindow.ui
 
-OTHER_FILES += \
-    /opt/app/tools/atbupdate/update_log.csv \
-    main.cpp.bck \
-    main.cpp.bck2 \
-    main.cpp.bck3
-
-# https://blog.developer.atlassian.com/the-power-of-git-subtree/?_ga=2-71978451-1385799339-1568044055-1068396449-1567112770
-# git subtree add --prefix DCPlugin https://git.mimbach49.de/GerhardHoffmann/DCPlugin.git master --squash
-# git subtree pull --prefix DCPlugin https://git.mimbach49.de/GerhardHoffmann/DCPlugin.git master --squash
-# include(./DCPlugin/DCPlugin.pri)
-
-
 
 ##########################################################################################
 # for running program on target through QtCreator

git/git_client.cpp

@@ -114,16 +114,14 @@ bool GitClient::gitCloneAndCheckoutBranch() {
     return false;
 }
 
-QStringList GitClient::gitShowReason() {
+QStringList GitClient::gitShowReason(QString branchName) {
     QStringList lst;
     if (QDir(m_customerRepository).exists()) {
         // %h: commit (short form)
         // %s: commit message
         // %cI: commit date, strict ISO 8601 format
-        // Note: use master branch. By convention, there is a ChangeLog file
-        // in the root of the repository, which has to be always the last file
-        // to be checked in when the customer repository somehow changed.
-        Command c("git show origin/master -s --format=\"c=%h m=%s d=%cI\"");
+        // Note: branch with branchName has to exist: format zg1/zone1
+        Command c(QString("git show origin/%1 -s --format=\"c=%h m=%s d=%cI\"").arg(branchName));
         if (c.execute(m_customerRepository)) {
             QString const s = c.getCommandResult().trimmed();
             int const c = s.indexOf("c=");
@@ -271,8 +269,8 @@ std::optional<QString> GitClient::gitFetch() {
                     Utils::printCriticalErrorMsg(QString("WRONG FORMAT FOR RESULT OF 'GIT FETCH' ") + s);
                 }
             } else {
-                emit m_worker->showErrorMessage("git fetch", "empty result for 'git fetch'");
-                Utils::printCriticalErrorMsg("EMPTY RESULT FOR 'GIT FETCH'");
+                // emit m_worker->showErrorMessage("git fetch", "empty result for 'git fetch'");
+                Utils::printInfoMsg("EMPTY RESULT FOR 'GIT FETCH'");
             }
         }
     } else {

git/git_client.h

@@ -50,7 +50,7 @@ class GitClient : public QObject {
     std::optional<QStringList> gitMerge();
 
     QString gitLastCommit(QString fileName);
-    QStringList gitShowReason();
+    QStringList gitShowReason(QString branchName);
     static QString gitBlob(QString fileName);
     QString gitCommitForBlob(QString blob);
     bool gitIsFileTracked(QString file2name);

ismas/ismas_client.cpp

@@ -23,6 +23,15 @@
 #include <QJsonObject>
 
 #if 0
+########################
+# Spec vom 27.10.2023:
+# U0010 -> %-Werte
+# U0001 -> 100%
+# U0003 -> "FAIL"
+# U0002 -> "" (OK -> WAIT state reset)
+# ISMAS -> "WAIT"
+########################
+#
 # $1: EVENT: U0001 update finished: 100%
 #            U0002 reset TRG
 #            U0003 error
@@ -857,7 +866,14 @@ QString IsmasClient::jsonParseFailed(int resultCode, QString reason, QString con
                              version.toStdString().c_str());
 }
 
-std::optional<QString> IsmasClient::finalResult(int resultCode, QString reason, QString const &version) {
+std::optional<QString> IsmasClient::finalResult(int resultCode,
+                                                QString reason,
+                                                QString const &version) {
+    Q_UNUSED(resultCode);
+    Q_UNUSED(reason);
+    Q_UNUSED(version);
+
+    /*
     m_progressInPercent = 100;
     if (resultCode == RESULT_CODE::SUCCESS) {
         return updateNewsToIsmas("U0002",
@@ -875,6 +891,7 @@ std::optional<QString> IsmasClient::finalResult(int resultCode, QString reason,
                                  reason.toStdString().c_str(),
                                  version.toStdString().c_str());
     }
+    */
     return std::nullopt;
 }
 

main.cpp

@@ -180,8 +180,7 @@ int main(int argc, char *argv[]) {
     worker.setMainWindow(&mw);
 
     mw.setWindowFlags(Qt::Window | Qt::FramelessWindowHint);
-    mw.setWindowState(Qt::WindowFullScreen);
-    mw.show();
+    mw.showFullScreen();
 
     return a.exec();
 }

mainwindow.cpp

@@ -10,6 +10,7 @@
 #include <QMessageBox>
 #include <QDebug>
 #include <QScrollBar>
+#include <QEvent>
 
 
 
@@ -125,6 +126,7 @@ MainWindow::MainWindow(hwinf *hw, Worker *worker, Update *update, QWidget *paren
     QString start = QDateTime::currentDateTime().toString(Qt::ISODate);
     lst << QString("Start: ") + start.leftJustified(m_width-10);
     lst << QString("").leftJustified(m_width-3, '=');
+    lst << QString("Update tool version: %1 - %2 %3").arg(APP_VERSION).arg(APP_BUILD_DATE).arg(APP_BUILD_TIME).leftJustified(m_width-3);
     lst << QString("Machine number     : %1 ").arg(m_worker->machineNr()).leftJustified(m_width-3);
     lst << QString("Customer number    : %1 ").arg(m_worker->customerNr()).leftJustified(m_width-3);
     lst << QString("Zone number        : %1 (%2)").arg(m_worker->zoneNr()).arg(Utils::zoneName(m_worker->zoneNr())).leftJustified(m_width-3);
@@ -319,7 +321,8 @@ void MainWindow::onRestartExitTimer() {
     m_exitTimer->stop();
     m_exitTimer->start(60 * 1000);
 
-    // ui->updateStatus->blockSignals(true);
+    scrollDownTextEdit();
+    ui->updateStatus->setEnabled(false);
 }
 
 void MainWindow::onQuit() {
@@ -329,8 +332,8 @@ void MainWindow::onQuit() {
 }
 
 void MainWindow::scrollDownTextEdit() {
-    Utils::printInfoMsg(QString("SCROLL-DOWN-TEXT_EDIT CALLED AT ")
-        + QDateTime::currentDateTime().toString(Qt::ISODateWithMs));
+    // Utils::printInfoMsg(QString("SCROLL-DOWN-TEXT_EDIT CALLED AT ")
+    //    + QDateTime::currentDateTime().toString(Qt::ISODateWithMs));
 
     ui->updateStatus->setEnabled(true);
 
@@ -341,10 +344,12 @@ void MainWindow::scrollDownTextEdit() {
 }
 
 void MainWindow::onAppendText(QString text, QString suffix) {
-    Utils::printInfoMsg(QString("ON APPEND CALLED AT ")
-        + QDateTime::currentDateTime().toString(Qt::ISODateWithMs));
+    // Utils::printInfoMsg(QString("ON APPEND CALLED AT ")
+    //    + QDateTime::currentDateTime().toString(Qt::ISODateWithMs));
 
     QString editText = ui->updateStatus->toPlainText();
+    scrollDownTextEdit();
+
     if (!suffix.isNull() && suffix.size() > 0) {
         //qInfo() << "TEXT" << text << "SUFFIX" << suffix;
         if (suffix == Worker::UPDATE_STEP_SUCCESS || suffix == Worker::UPDATE_STEP_FAIL) {
@@ -366,12 +371,12 @@ void MainWindow::onAppendText(QString text, QString suffix) {
     // Utils::printLineEditInfo(editText.split('\n', QString::SplitBehavior::SkipEmptyParts));
     // ui->updateStatus->setText(editText.trimmed());
 
-    scrollDownTextEdit();
+    // scrollDownTextEdit();
 }
 
 void MainWindow::onReplaceLast(QStringList newTextLines, QString suffix) {
-    Utils::printInfoMsg(QString("ON REPLACE LAST (LIST) CALLED AT ")
-        + QDateTime::currentDateTime().toString(Qt::ISODateWithMs));
+    // Utils::printInfoMsg(QString("ON REPLACE LAST (LIST) CALLED AT ")
+    //    + QDateTime::currentDateTime().toString(Qt::ISODateWithMs));
 
     int const s = newTextLines.size();
     if (s > 0) {
@@ -405,8 +410,8 @@ void MainWindow::onReplaceLast(QStringList newTextLines, QString suffix) {
 }
 
 void MainWindow::onReplaceLast(QString text, QString suffix) {
-    Utils::printInfoMsg(QString("ON REPLACE LAST (TEXT) CALLED AT ")
-        + QDateTime::currentDateTime().toString(Qt::ISODateWithMs));
+    // Utils::printInfoMsg(QString("ON REPLACE LAST (TEXT) CALLED AT ")
+    //    + QDateTime::currentDateTime().toString(Qt::ISODateWithMs));
 
     QString editText = ui->updateStatus->toPlainText();
     QStringList lines = editText.split('\n', QString::SplitBehavior::SkipEmptyParts);

plugins/interfaces.h

@@ -193,7 +193,7 @@ struct T_moduleCondition
         uint8_t	coinChecker;		// EMP, OMP or mei-cashflow
 
         uint8_t	coinEscrow;
-        uint8_t	mifareReader;
+        uint8_t	mifareReader;       // 0: unknown  1=OK  200=no response  201=wrong response   202: Reader reports HW-error
         uint8_t	creditTerm;
         uint8_t	coinReject;
 
@@ -818,7 +818,7 @@ public:
 // --------------------------------------------- MIFARE -----------------------------------------------------
 // ----------------------------------------------------------------------------------------------------------
 
-
+// obsolete
     virtual uint8_t mif_returnReaderStateAndCardType(uint8_t *buf, uint8_t maxBufferSize) const =0;
         // retval 0=OK 1=error host buffer too small
     /* data description, new fast version:
@@ -840,13 +840,16 @@ public:
     virtual bool mif_readerIsOK(void) const =0;
 
     virtual bool mif_cardAttached(void) const =0;
+        // not working! use mif_cardIsAttached() instead
 
     virtual uint8_t mif_readResult(void) const =0;
         // result: 0: unknown or still in progress
         //         1: card read successful
         //         2: reading error
+        // not working!
 
     virtual QString mif_cardUID(void) const =0;
+        // not working
 
     virtual uint8_t mif_getCardDataDec(uint8_t blkNr, uint8_t *buf, uint8_t maxBufferSize) const =0;
 
@@ -1289,7 +1292,7 @@ public:
         // 1= wrong length    2=wrong start sign           5= wrong crc
         // 6= slave: master cmd was wrong       7: slave: could not write/read data
         // 8=timeout, got no response from slave
-
+        // 0,8 work, 1..6 not yet tested. 8 comes immed. and stays 8 until reconnect
 
     // use for important and extended commands (print several templates, print ticket...)
     virtual void log_startSupervision(void) const =0;
@@ -1299,6 +1302,7 @@ public:
         // 0: started, in progress
         // 1: done and OK
         // 2: done and error
+        // not working properly, always 0
 
     virtual bool log_getVaultData(uint8_t *data) const =0;
         // get vault record in linear 8bit buffer with 384 byte
@@ -1343,6 +1347,37 @@ public:
 
 
 
+    // new functions from 8.9.23
+    virtual QString mif_getReaderType(void) const =0;
+        // return "SL025" if correct reader is connected
+
+    virtual void mif_getCardSize(uint8_t *cardSize, uint8_t *idLeng) const =0;
+        // cardSize=1k or 4kByte
+        // idLeng =4Byte or 7 byte
+
+    virtual char mif_getAtbCardData(uint8_t *buf, uint8_t maxBuffSiz) const =0;
+        // return complete buffer binary, just for test purpose
+
+    virtual bool mif_isValidAtbCard(void) const =0;
+
+    virtual uint32_t mif_getAtbCardCuNu(void) const =0;
+
+    virtual uint8_t mif_getAtbCardTyp(void) const =0;
+        // return 1=upper door card     1=lower door    3=printer-test   4=coin-test
+        //          0: not a valid atb2020 card
+
+    virtual QString mif_getAtbCardPerso(void) const =0;
+        // e.g. "PNsax001" used for personal number, name shortcode, card number
+        // free to use, can be set in AtbMcw23.exe tool
+
+    virtual void mif_getAtbCardExpire(uint8_t *year, uint8_t *month, uint8_t *day, uint8_t *hour, uint8_t *minute) const =0;
+
+
+
+
+
+
+
 signals:
     virtual void hwapi_templatePrintFinished_OK(void) const=0;
     virtual void hwapi_templatePrintFinished_Err(void) const=0;
@@ -1413,9 +1448,15 @@ signals:
 //#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.1"
 //#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.2"
 //#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.3"
-#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.4"
-
+//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.4"
+    // 8.9.2023 two new functions (end of file) for mifare test
+//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.5"
+    // 18.9.2023 major improvements for DC data exchange
+    // verification of door and cash box signals
+    // intensive verification of Json-Programming Master-Slave (PTU to DC), 100% ok
 
+#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.6"
+    // 20.9.2023: speeding up door and cash box signals
 
 
 Q_DECLARE_INTERFACE(hwinf, HWINF_iid)

process/command.cpp

@@ -69,7 +69,14 @@ bool Command::execute(QString workingDirectory, QStringList args) {
         qDebug() << "PROCESS" << m_command << "STARTED IN" << p->workingDirectory();
         if (p->state() == QProcess::ProcessState::Running) {
             qDebug() << "PROCESS" << m_command << "RUNNING IN" << p->workingDirectory();
-            if (p->waitForFinished(m_waitForFinishTimeout)) {
+            // wait forever for git/opkg-commands to finish
+            int wait = m_waitForFinishTimeout;
+            if (m_command.trimmed().startsWith("git", Qt::CaseInsensitive) ||
+                m_command.trimmed().startsWith("opkg", Qt::CaseInsensitive)) {
+                wait = -1;
+            }
+            bool const no_timeout = p->waitForFinished(wait);
+            if (no_timeout) {
                 qDebug() << "PROCESS" << m_command << "FINISHED IN" << p->workingDirectory();
                 if (p->exitStatus() == QProcess::NormalExit) {
                     if ((m_exitCode = p->exitCode()) == 0) {
@@ -89,8 +96,8 @@ bool Command::execute(QString workingDirectory, QStringList args) {
                 }
             } else {
                 qCritical() << "PROCESS" << m_command
-                            << "DID NOT FINISH"
-                            << "IN" << p->workingDirectory();
+                            << "DID NOT FINISH WITH" << wait
+                            << "MS IN" << p->workingDirectory();
             }
         } else {
             qCritical() << "WRONG PROCESS STATE" << p->state()

update.cpp

@@ -29,11 +29,7 @@
 #include <QMap>
 
 #define UPDATE_OPKG                 (1)
-#define UPDATE_DC                   (1)
-#define UPDATE_PRINTER_TEMPLATES    (1)
-#define UPDATE_CASH_TEMPLATE        (1)
-#define UPDATE_CONF_TEMPLATE        (1)
-#define UPDATE_DEVICE_TEMPLATE      (1)
+#define UPDATE_DC                   (0)
 
 static const QMap<QString, int> baudrateMap = {
   {"1200"   ,   0}, {"9600"   ,   1}, {"19200"  ,   2}, {"38400"  ,   3},
@@ -610,9 +606,12 @@ bool Update::downloadJson(enum FileTypeJson type,
                           int templateIdx,
                           QString jsFileToSendToDC) const {
 
-    qDebug() << "updating json-file:" << jsFileToSendToDC << "...";
-    qDebug() << "    template-index:" << templateIdx;
-    qDebug() << "         json-type:" << jsonType(type);
+
+    Utils::printInfoMsg(
+        QString("UPDATING JSON-FILE=%1, TEMPLATE-INDEX=%2, JSON-TYPE=%3")
+            .arg(jsFileToSendToDC)
+            .arg(templateIdx)
+            .arg(jsonType(type)));
 
     m_hw->dc_autoRequest(true); // downloading Json needs the AutoEmission flag
     qDebug() << "SET AUTO-REQUEST=TRUE";
@@ -623,7 +622,7 @@ bool Update::downloadJson(enum FileTypeJson type,
     while ((ready = m_hw->sys_ready4sending()) == false) {
         QThread::msleep(200);
         if (--nTry <= 0) {
-            qCritical() << "SYS NOT READY FOR SENDING AFTER 5 SECONDS";
+            Utils::printCriticalErrorMsg("SYS NOT READY FOR SENDING AFTER 5 SECONDS");
             break;
         }
     }
@@ -636,22 +635,27 @@ bool Update::downloadJson(enum FileTypeJson type,
             if (file.open(QIODevice::ReadOnly)) {
                 if (fi.size() <= 800) {
                     QByteArray ba = file.readAll();
+                    // kindOfFile: 1=config, 2=device, 3=cash, 4=serial, 5=time, 6=printer
+                    //      nrOfTemplate=1...32 if kindOfFile==6
+                    //      content = content of the Json file, max 800byte ascii signs
                     if (m_hw->sys_sendJsonFileToDc((uint8_t)(type),
                                                    templateIdx,
                                                    (uint8_t *)ba.data())) {
                         QThread::sleep(1);
-                        qDebug() << "SENT" << jsFileToSendToDC;
                         ret = true;
                     }
                 } else {
-                    qCritical() << "SIZE OF" << jsFileToSendToDC
-                                << "TOO BIG (" << fi.size() << "BYTES)";
+                    Utils::printCriticalErrorMsg(
+                        QString("SIZE OF %1 TOO BIG (%2 BYTES)")
+                            .arg(jsFileToSendToDC).arg(fi.size()));
                 }
             } else {
-                qCritical() << "CANNOT OPEN" << jsFileToSendToDC << "FOR READING";
+                Utils::printCriticalErrorMsg(
+                    QString("CAN NOT OPEN ") + jsFileToSendToDC + " FOR READING");
             }
         } else {
-            qCritical() << jsFileToSendToDC << "DOES NOT EXIST";
+            Utils::printCriticalErrorMsg(
+                QString(jsFileToSendToDC) + " DOES NOT EXIST");
         }
     }
 
@@ -738,64 +742,13 @@ QStringList Update::getDcSoftAndHardWareVersion() {
 }
 
 bool Update::doUpdate(int &displayIndex, QStringList const &filesToWorkOn) {
-    bool serialOpened = false;
-
-    QString const &parentName = Utils::getParentName();
-
-    Utils::printInfoMsg(
-        QString("PARENT OF ATB-UPDATE-TOOL (ppid=%1) ").arg(getppid()) + parentName);
-
-    if (parentName == "ATBQT" || parentName == "systemd") {
-        // the tool was not called during 'service' ot during an automatic
-        // update procedure. and it was called explicitly with libCAmaster.so
-        if (m_pluginName.contains("master", Qt::CaseInsensitive)) {
-            Utils::printCriticalErrorMsg(parentName
-                + " IS MASTER, BUT ATB-UPDATE-TOOL CALLED WITH libCAmaster.so");
-            return false;
-        }
-        Utils::printInfoMsg(
-            QString("ATB-UPDATE-TOOL STARTED AS SLAVE OF ") + parentName);
-    } else
-    if (Utils::isATBQTRunning()) {  // manual testing
-        if (m_pluginName.contains("master", Qt::CaseInsensitive)) {
-            Utils::printCriticalErrorMsg(
-                "ATBQT IS MASTER, BUT ATB-UPDATE-TOOL CALLED WITH libCAmaster.so");
-            return false;
-        }
-        Utils::printInfoMsg(
-            "ATB-UPDATE-TOOL STARTED AS SLAVE-SIBLING OF ATBQT-MASTER");
-    } else {
-        if (m_pluginName.contains("slave", Qt::CaseInsensitive)) {
-            Utils::printCriticalErrorMsg(
-                "ATB-UPDATE-TOOL CALLED WITH libCAslave.so ALTHOUGH MASTER");
-            return false;
-        }
-        Utils::printInfoMsg("ATB-UPDATE-TOOL STARTED AS MASTER");
-
-        if ((serialOpened = openSerial(baudrateMap.value(m_baudrate),
-                                       m_baudrate,
-                                       m_serialInterface)) == false) {
-                Utils::printCriticalErrorMsg(
-                    QString("CANNOT OPEN ")
-                          + m_serialInterface
-                          + "( BAUDRATE=" + m_baudrate + ")");
-                return false;
-        }
-
-        m_hw->dc_autoRequest(false);
-
-        Utils::printInfoMsg(
-            QString("SERIAL OPEN ") + m_serialInterface
-                + " (BAUDRATE=" + m_baudrate + ")");
-    }
-
+    // always assume that serial line is open
     bool res = false;
     QList<QString>::const_iterator it;
     for (it = filesToWorkOn.cbegin(); it != filesToWorkOn.cend(); ++it) {
         m_worker->startProgressLoop();
-        QString fToWorkOn = (*it).trimmed();
-        fToWorkOn = QDir::cleanPath(m_customerRepository + QDir::separator() + fToWorkOn);
-
+        QString const &fToWorkOn = QDir::cleanPath(m_customerRepository + QDir::separator() + it->trimmed());
+#if UPDATE_DC == 1
         static const QRegularExpression version("^.*dc2c[.][0-9]{1,2}[.][0-9]{1,2}[.]bin.*$");
         if (fToWorkOn.contains(version)) {
             Utils::printInfoMsg("DO-UPDATE FILE-TO-WORK-ON " + fToWorkOn);
@@ -810,7 +763,6 @@ bool Update::doUpdate(int &displayIndex, QStringList const &filesToWorkOn) {
                 bool updateBinaryRes = true;
 
                 qInfo() << "DOWNLOADING" << finfo.completeBaseName() << "TO DC";
-#if UPDATE_DC == 1
                 m_hw->dc_autoRequest(false);// default: turn auto-request setting off
                 QThread::sleep(1);          // wait to be sure that there are no more
                                             // commands sent to dc-hardware
@@ -837,13 +789,12 @@ bool Update::doUpdate(int &displayIndex, QStringList const &filesToWorkOn) {
                         qInfo() << "dc-firmware-version (NOT UPDATED)" << versions[1];
                     }
                 }
-#endif
                 res = updateBinaryRes;
             }
-        } else if (fToWorkOn.contains("DC2C_print", Qt::CaseInsensitive)
+#endif
+        if (fToWorkOn.contains("DC2C_print", Qt::CaseInsensitive)
          && fToWorkOn.endsWith(".json", Qt::CaseInsensitive)) {
             res = true;
-#if UPDATE_PRINTER_TEMPLATES == 1
             int i = fToWorkOn.indexOf("DC2C_print", Qt::CaseInsensitive);
             int const templateIdx = fToWorkOn.mid(i).midRef(10, 2).toInt();
             if ((templateIdx < 1) || (templateIdx > 32)) {
@@ -851,50 +802,46 @@ bool Update::doUpdate(int &displayIndex, QStringList const &filesToWorkOn) {
                 res = false;
             } else {
                 if ((res = updatePrinterTemplate(templateIdx, fToWorkOn))) {
-                    qInfo() << "downloaded printer template"<< fToWorkOn;
+                    Utils::printInfoMsg(
+                        QString("DOWNLOADED PRINTER TEMPLATE %1 WITH INDEX=%2")
+                            .arg(fToWorkOn)
+                            .arg(templateIdx));
                     ++displayIndex;
-                    emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(2, ' ') + QString(")")
+                    emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(3, ' ') + QString(")")
                           + QString(" Update ") + QFileInfo(fToWorkOn).fileName(),
                             Worker::UPDATE_STEP_DONE);
                 }
             }
-#endif
         } else if (fToWorkOn.contains("DC2C_cash", Qt::CaseInsensitive)
                 && fToWorkOn.endsWith(".json", Qt::CaseInsensitive)) {
             res = true;
-#if UPDATE_CASH_TEMPLATE == 1
             if ((res = updateCashConf(fToWorkOn))) {
-                qInfo() << "downloaded cash template"<< fToWorkOn;
+                Utils::printInfoMsg(QString("DOWNLOADED CASH TEMPLATE %1").arg(fToWorkOn));
                 ++displayIndex;
-                emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(2, ' ') + QString(")")
+                emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(3, ' ') + QString(")")
                       + QString(" Update ") + QFileInfo(fToWorkOn).fileName(),
                         Worker::UPDATE_STEP_DONE);
             }
-#endif
         } else if (fToWorkOn.contains("DC2C_conf", Qt::CaseInsensitive)
                 && fToWorkOn.endsWith(".json", Qt::CaseInsensitive)) {
             res = true;
-#if UPDATE_CONF_TEMPLATE == 1
             if ((res= updateConfig(fToWorkOn))) {
-                qInfo() << "downloaded config template"<< fToWorkOn;
+                Utils::printInfoMsg(QString("DOWNLOADED CONFIG TEMPLATE %1").arg(fToWorkOn));
                 ++displayIndex;
-                emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(2, ' ') + QString(")")
+                emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(3, ' ') + QString(")")
                       + QString(" Update ") + QFileInfo(fToWorkOn).fileName(),
                         Worker::UPDATE_STEP_DONE);
             }
-#endif
         } else if (fToWorkOn.contains("DC2C_device", Qt::CaseInsensitive)
                 && fToWorkOn.endsWith(".json", Qt::CaseInsensitive)) {
             res = true;
-#if UPDATE_DEVICE_TEMPLATE == 1
             if ((res = updateDeviceConf(fToWorkOn))) {
-                qInfo() << "downloaded device template"<< fToWorkOn;
+                Utils::printInfoMsg(QString("DOWNLOADED DEVICE TEMPLATE %1").arg(fToWorkOn));
                 ++displayIndex;
-                emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(2, ' ') + QString(")")
+                emit m_worker->appendText(QString("\n(") + QString("%1").arg(displayIndex).rightJustified(3, ' ') + QString(")")
                       + QString(" Update ") + QFileInfo(fToWorkOn).fileName(),
                         Worker::UPDATE_STEP_DONE);
             }
-#endif
         } else {
             qCritical() << "UNKNOWN JSON FILE NAME" << fToWorkOn;
             res = false;
@@ -907,12 +854,8 @@ bool Update::doUpdate(int &displayIndex, QStringList const &filesToWorkOn) {
         }
     } // for (it = openLines.cbegin(); it != openLines.end(); ++it) {
 
-    //m_hw->dc_autoRequest(true);  // ALWAYS turn autoRequest ON
-    //qDebug() << "SET AUTO-REQUEST=TRUE";
-
-    if (serialOpened) {
-        m_hw->dc_closeSerial();
-    }
+    m_hw->dc_autoRequest(true);  // ALWAYS turn autoRequest ON
+    qDebug() << "SET AUTO-REQUEST=TRUE";
 
     return res;
 }

worker.cpp

@@ -88,6 +88,7 @@ Worker::Worker(int customerNr,
         m_apismVersion = v.value();
     }
 
+    Utils::printInfoMsg("STARTING PTU-UPDATE");
     qInfo() << "CURRENT TIME ..............." << QDateTime::currentDateTime().toString(Qt::ISODate);
     qInfo() << "OS VERSION ................." << m_osVersion;
     qInfo() << "ATBQT VERSION .............." << m_atbqtVersion;
@@ -170,8 +171,7 @@ void Worker::privateUpdate() {
             stopProgressLoop();
             emit replaceLast("Initializing customer environment", UPDATE_STEP_DONE);
 
-            int progress = (m_mainWindow->progressValue()/10) + 10;
-            setProgress(progress);
+            setProgress(5);
 
             m_updateStatus = UpdateStatus(UPDATE_STATUS::GIT_CLONE_AND_CHECKOUT_SUCCESS,
                                   QString("CLONED AND CHECKED OUT: ") + m_customerRepository);
@@ -181,7 +181,7 @@ void Worker::privateUpdate() {
                         m_ismasClient.cloneAndCheckoutCustomerRepository(
                             m_updateStatus.m_statusDescription));
 
-            setProgress(progress + 10);
+            setProgress(10);
 
             IsmasClient::sendRequestReceiveResponse(IsmasClient::APISM::DB_PORT,
                     QString("#M=APISM#C=CMD_EVENT#J=") +
@@ -195,9 +195,7 @@ void Worker::privateUpdate() {
             m_returnCode = 0;
         } else {
             stopProgressLoop();
-
-            int progress = (m_mainWindow->progressValue()/10) + 10;
-            setProgress(progress);
+            setProgress(0);
 
             emit replaceLast("Initializing customer environment", UPDATE_STEP_FAIL);
 
@@ -210,11 +208,9 @@ void Worker::privateUpdate() {
             m_returnCode = -3;
         }
     } else {
-        m_ismasClient.setProgressInPercent(10);
-        if (updateTriggerSet()) {
-            m_ismasClient.setProgressInPercent(20);
-            if (customerEnvironment()) {
-                m_ismasClient.setProgressInPercent(30);
+        if (updateTriggerSet(5)) {
+            if (customerEnvironment(30)) {
+                m_ismasClient.setProgressInPercent(50);
                 if (filesToUpdate()) {
                     // send message to ISMAS about files which have been
                     // checked in into git repository
@@ -224,23 +220,19 @@ void Worker::privateUpdate() {
                         QString("#M=APISM#C=CMD_EVENT#J=") +
                             m_ismasClient.updateOfPSAContinues("CHECK-FILES-TO-UPDATE",
                                                                m_updateStatus.m_statusDescription));
-                    m_ismasClient.setProgressInPercent(40);
-                    if (updateFiles(50)) {
-                        m_ismasClient.setProgressInPercent(50);
-                        if (syncCustomerRepositoryAndFS()) {
-                            m_ismasClient.setProgressInPercent(60);
-                            if (sendIsmasLastVersionNotification()) {
+                    if (updateFiles(60)) {
                         m_ismasClient.setProgressInPercent(70);
+                        if (syncCustomerRepositoryAndFS()) {
+                            m_ismasClient.setProgressInPercent(80);
+                            if (sendIsmasLastVersionNotification()) {
+                                m_ismasClient.setProgressInPercent(90);
                                 sentIsmasLastVersionNotification = true;
                                 if (saveLogFile()) {
-                                    m_ismasClient.setProgressInPercent(80);
-
                                     IsmasClient::sendRequestReceiveResponse(IsmasClient::APISM::DB_PORT,
                                         QString("#M=APISM#C=CMD_EVENT#J=") +
                                             m_ismasClient.updateOfPSASucceeded(""));
 
                                     // mark update as activated -> this resets the WAIT button
-                                    m_ismasClient.setProgressInPercent(95);
                                     IsmasClient::sendRequestReceiveResponse(IsmasClient::APISM::DB_PORT,
                                         QString("#M=APISM#C=CMD_EVENT#J=") +
                                             m_ismasClient.updateOfPSAActivated());
@@ -325,13 +317,14 @@ void Worker::privateUpdate() {
         stopProgressLoop();
         emit appendText(QString("UPDATE "), UPDATE_STEP_FAIL);
 
-        m_updateStatus = UpdateStatus(UPDATE_STATUS::UPDATE_PROCESS_FAILURE,
-                                      QString("Update process failed"));
-        if (std::optional<QString> s = m_ismasClient.finalResult(IsmasClient::RESULT_CODE::INSTALL_ERROR,
-                                                                 m_updateStatus.m_statusDescription)) {
-            IsmasClient::sendRequestReceiveResponse(IsmasClient::APISM::DB_PORT,
-                QString("#M=APISM#C=CMD_EVENT#J=") + s.value());
-        }
+        // m_updateStatus = UpdateStatus(UPDATE_STATUS::UPDATE_PROCESS_FAILURE,
+        //                               QString("Update process failed"));
+        // if (std::optional<QString> s = m_ismasClient.finalResult(IsmasClient::RESULT_CODE::INSTALL_ERROR,
+        //                                                         m_updateStatus.m_statusDescription)) {
+        //    IsmasClient::sendRequestReceiveResponse(IsmasClient::APISM::DB_PORT,
+        //        QString("#M=APISM#C=CMD_EVENT#J=") + s.value());
+        // }
+
     } else {
         emit appendText(QString("UPDATE "), UPDATE_STEP_SUCCESS);
 
@@ -414,7 +407,7 @@ std::optional<QString> Worker::getApismVersion() {
 
 #define CHECK_UPDATE_TRIGGER_SET "Check update trigger ..."
 
-bool Worker::updateTriggerSet() {
+bool Worker::updateTriggerSet(int progress) {
     if (m_withoutIsmasDirectPort) { // useful for testing
         return true;
     }
@@ -450,8 +443,7 @@ bool Worker::updateTriggerSet() {
                 = IsmasClient::sendRequestReceiveResponse(
                     IsmasClient::APISM::DIRECT_PORT, "#M=APISM#C=REQ_ISMASPARAMETER#J={}")) {
             stopProgressLoop();
-            int progress = (m_mainWindow->progressValue()/10) + 10;
-            setProgress(progress);
+            setProgress(m_mainWindow->progressValue()/10 + 11);
 
             QString msg = result.value();
 
@@ -490,15 +482,13 @@ bool Worker::updateTriggerSet() {
                 emit replaceLast(CHECK_UPDATE_TRIGGER_SET, UPDATE_STEP_FAIL);
                 return false;
             }
-            progress += 1;
-            setProgress(progress);
+            setProgress(m_mainWindow->progressValue()/10 + 11);
 
             QJsonObject obj = document.object();
 
             // always look for an 'error' first
             if (obj.contains("error")) {
-                progress += 1;
-                setProgress(progress);
+                setProgress(m_mainWindow->progressValue()/10 + 11);
                 QString value = obj.value("error").toString();
                 emit showErrorMessage("check update trigger", QString("REPEAT %1 error=<").arg(repeat) + value + ">");
                 qInfo() << "REPEAT" << repeat << "In updateTriggerSet() error=<"
@@ -583,8 +573,7 @@ bool Worker::updateTriggerSet() {
                 emit replaceLast(CHECK_UPDATE_TRIGGER_SET, UPDATE_STEP_FAIL);
                 return false;
             }
-            progress += 1;
-            setProgress(progress);
+            setProgress(m_mainWindow->progressValue()/10 + 11);
 
             if (obj.contains("Fileupload")) {
                 QJsonValue v = obj.value("Fileupload");
@@ -602,11 +591,17 @@ bool Worker::updateTriggerSet() {
                             m_updateStatus = UpdateStatus(UPDATE_STATUS::ISMAS_SANITY_CHECK_OK,
                                                           QString("MACHINE-NR (%1) AND CUST-NR (%2) OK")
                                                             .arg(m_machineNr).arg(m_customerNr));
+
+                            m_ismasClient.setProgressInPercent(progress);
+
                             IsmasClient::sendRequestReceiveResponse(IsmasClient::APISM::DB_PORT,
                                 QString("#M=APISM#C=CMD_EVENT#J=") +
                                     m_ismasClient.updateOfPSAContinues("MACHINE-AND-CUSTOMER-CHECK",
                                                                    m_updateStatus.m_statusDescription));
 
+                            progress += 5;
+                            m_ismasClient.setProgressInPercent(progress);
+
                             m_updateStatus = UpdateStatus(UPDATE_STATUS::ISMAS_UPDATE_TRIGGER_SET,
                                 QString("UPDATE TRIGGER SET. CONTINUE. "));
                             IsmasClient::sendRequestReceiveResponse(IsmasClient::APISM::DB_PORT,
@@ -618,9 +613,7 @@ bool Worker::updateTriggerSet() {
                         } else
                         if (QRegExp("\\s*").exactMatch(triggerValue)) { // check for whitespace
                             stopProgressLoop();
-                            int progress = (m_mainWindow->progressValue()/10) + 10;
-                            progress += 1;
-                            setProgress(progress);
+                            setProgress(m_mainWindow->progressValue()/10 + 11);
                             emit showErrorMessage("check update trigger", "empty update-trigger");
                             QThread::sleep(6);
                             continue;
@@ -675,9 +668,7 @@ bool Worker::updateTriggerSet() {
             }
         } else {
             stopProgressLoop();
-            int progress = (m_mainWindow->progressValue()/10) + 10;
-            progress += 1;
-            setProgress(progress);
+            setProgress(m_mainWindow->progressValue()/10 + 11);
             emit showErrorMessage("check update trigger", "no ISMAS response");
             QThread::sleep(6);
         }
@@ -695,14 +686,14 @@ bool Worker::updateTriggerSet() {
     return false;
 }
 
-bool Worker::customerEnvironment() {
+bool Worker::customerEnvironment(int progress) {
     emit appendText("\nPrepare customer environment ...");
     if (QDir(m_customerRepository).exists()) {
         startProgressLoop();
+        setProgress(m_mainWindow->progressValue()/10 + 11);
         if (m_gc.gitCheckoutBranch()) {
             stopProgressLoop();
-            int progress = (m_mainWindow->progressValue()/10) + 10;
-            setProgress(progress);
+            m_ismasClient.setProgressInPercent(progress);
 
             m_updateStatus = UpdateStatus(UPDATE_STATUS::GIT_CHECKOUT_BRANCH,
                                     QString("CHECKED-OUT BRANCH ") + m_gc.branchName());
@@ -717,8 +708,8 @@ bool Worker::customerEnvironment() {
             return true;
         } else {
             stopProgressLoop();
-            int progress = (m_mainWindow->progressValue()/10) + 10;
-            setProgress(progress);
+            m_ismasClient.setProgressInPercent(0);
+
             emit showErrorMessage("cust-env",
                                   QString("Checkout ") + m_customerRepository + " failed");
             Utils::printCriticalErrorMsg(QString("CHECKOUT OF " + m_customerRepository + "FAILED"));
@@ -736,6 +727,10 @@ bool Worker::customerEnvironment() {
 bool Worker::filesToUpdate() {
     emit appendText("\nFetch changes files ...");
     startProgressLoop();
+
+    // always execute contents of opkg_commands-file
+    m_filesToUpdate << "etc/psa_update/opkg_commands";
+
     if (std::optional<QString> changes = m_gc.gitFetch()) {
         stopProgressLoop();
         int progress = (m_mainWindow->progressValue()/10) + 10;
@@ -750,10 +745,23 @@ bool Worker::filesToUpdate() {
             setProgress(progress + 20);
             if (m_gc.gitPull()) {
                 emit replaceLast(QString("Fetch changes files ..."), UPDATE_STEP_DONE);
-                m_filesToUpdate = changedFileNames.value();
+                m_filesToUpdate << changedFileNames.value();
+            } else {
+                emit showErrorMessage("files to update", "pulling files failed");
+                Utils::printCriticalErrorMsg("PULLING FILES FAILED");
+
+                emit replaceLast(QString("Fetch changes files ..."), UPDATE_STEP_FAIL);
+
+                stopProgressLoop();
+                setProgress(100);
+
+                return false;
+            }
+        }
 
         Utils::printInfoMsg("FILES-TO-UPDATE " + m_filesToUpdate.join(','));
 
+        m_filesToUpdate.removeDuplicates();
         int const size = m_filesToUpdate.size();
         if (size > 1) {
             emit appendText(QString("Found %1 files to update :").arg(size), UPDATE_STEP_DONE);
@@ -764,34 +772,12 @@ bool Worker::filesToUpdate() {
             emit appendText("Found 1 file to update :", UPDATE_STEP_DONE);
             emit appendText(QString("\n ") + m_filesToUpdate.at(0));
         }
+
+        setProgress(progress + 30);
+    }
+
     return true;
 }
-            emit showErrorMessage("files to update", "pulling files failed");
-            Utils::printCriticalErrorMsg("PULLING FILES FAILED");
-
-        } else {
-            emit showErrorMessage("files to update", "no files to update (checked-in any files?)");
-            Utils::printCriticalErrorMsg("NO FILES TO UPDATE (CHECKED IN ANY FILES?)");
-        }
-        setProgress(progress + 30);
-    } else {
-        stopProgressLoop();
-        int progress = (m_mainWindow->progressValue()/10) + 10;
-        setProgress(progress + 30);
-
-        emit showErrorMessage("files to update",
-                              QString("no changes in ") + m_customerRepository +
-                              " (checked-in any files?)");
-
-        Utils::printCriticalErrorMsg("NO CHANGES IN "
-                                     + m_customerRepository
-                                     + " (CHECKED IN ANY FILES?)");
-    }
-
-    emit replaceLast(QString("Fetch changes files ..."), UPDATE_STEP_FAIL);
-    setProgress(100);
-    return false;
-}
 
 bool Worker::updateFiles(quint8 percent) {
     QStringList filesToDownload;
@@ -809,16 +795,17 @@ bool Worker::updateFiles(quint8 percent) {
                 if (f.exists()) {
                     if (f.open(QIODevice::ReadOnly)) {
                         QTextStream in(&f);
-                        int cmdCount = 0;
                         QStringList opkgCommands;
+                        bool executeOpkgCommandFailed = false;
                         while (!in.atEnd()) {
                             QString line = in.readLine();
                             static const QRegularExpression comment("^\\s*#.*$");
                             if (line.indexOf(comment, 0) == -1) {
                                 // found opkg command
                                 QString opkgCommand = line.trimmed();
-                                ++cmdCount;
-                                executeOpkgCommand(opkgCommand);
+                                if (!executeOpkgCommand(opkgCommand)) {
+                                    executeOpkgCommandFailed = true;
+                                } else {
                                     QString cmd = "\n  " + opkgCommand;
                                     emit appendText(cmd);
                                     opkgCommands << cmd;
@@ -831,23 +818,33 @@ bool Worker::updateFiles(quint8 percent) {
                                                 m_ismasClient.execOpkgCommand(m_updateStatus.m_statusDescription, ""));
                                 }
                             }
+                        }
                         f.close();
-                        if (cmdCount > 0) {
+                        if (!executeOpkgCommandFailed) {
+                            if (opkgCommands.size() > 0) {
                                 m_displayIndex = 1;
-                            QString prepend = QString("(") + QString("%1").arg(m_displayIndex).rightJustified(2, ' ') + QString(")")
+                                QString prepend = QString("(") + QString("%1").arg(m_displayIndex).rightJustified(3, ' ') + QString(")")
                                                     + QString(" Update opkg pakets ... ");
                                 opkgCommands.prepend(prepend);
                                 emit replaceLast(opkgCommands, UPDATE_STEP_DONE);
+                            }
                         } else {
                             m_displayIndex = 1;
-                            emit replaceLast(QString("(") + QString("%1").arg(m_displayIndex).rightJustified(2, ' ') + QString(")")
+                            emit replaceLast(QString("(") + QString("%1").arg(m_displayIndex).rightJustified(3, ' ') + QString(")")
                                           + QString(" Update opkg pakets ... "), UPDATE_STEP_FAIL);
+
+                            stopProgressLoop();
+                            setProgress(100);
+                            return false;
                         }
                     }
                 }
             }
         } else
-        if (fName.contains("print", Qt::CaseInsensitive)) {
+        if (fName.contains("DC2C_print", Qt::CaseInsensitive) ||
+            fName.contains("DC2C_device", Qt::CaseInsensitive) ||
+            fName.contains("DC2C_conf", Qt::CaseInsensitive) ||
+            fName.contains("DC2C_cash", Qt::CaseInsensitive)) {
             filesToDownload << fName;  // download printer-config-files
         } else {
             static const QRegularExpression version("^.*dc2c[.][0-9]{1,2}[.][0-9]{1,2}[.]bin.*$");
@@ -866,6 +863,8 @@ bool Worker::updateFiles(quint8 percent) {
         Update *update = m_mainWindow->getUpdate();
         if (update) {
             return update->doUpdate(m_displayIndex, filesToDownload);
+        } else {
+            Utils::printCriticalErrorMsg("UPDATE NOT SET");
         }
     } else {
         Utils::printCriticalErrorMsg("NO FILES_TO_DOWNLOAD_TO_PSA_HW");
@@ -882,7 +881,7 @@ bool Worker::syncCustomerRepositoryAndFS() {
         if (QDir::setCurrent(m_customerRepository)) {
             Command md("bash");
             if (!md.execute(m_customerRepository,
-                            QStringList() << "-c" << "mkdir -p /etc/psa_config /etc/psa_update /etc/dc /etc/psa_tariff")) {
+                            QStringList() << "-c" << "mkdir -p /etc/psa_config /etc/dc /etc/psa_tariff")) {
                 qCritical() << "COULD NOT EXECUTE '" << md.command() << "' exitCode=(" << md.exitCode() << ")";
             }
             int progress = 10;
@@ -894,11 +893,17 @@ bool Worker::syncCustomerRepositoryAndFS() {
                                  "--exclude=.*            "
                                  "--include=*.bin         "
                                  "--include=*.json        "
-                                 "--include=opkg_commands "
                                  "--include=*.ini");
             QStringList cmds;
+
+            if (QDir(QDir::cleanPath(m_customerRepository + QDir::separator() + "etc/")).exists()) {
                 cmds << QString("rsync ") + params.simplified() + " etc/ /etc";
+                Utils::printInfoMsg(QString("CONFIGURED SYNCING TO /ETC"));
+            }
+            if (QDir(QDir::cleanPath(m_customerRepository + QDir::separator() + "opt/")).exists()) {
                 cmds << QString("rsync ") + params.simplified() + " opt/ /opt";
+                Utils::printInfoMsg(QString("CONFIGURED SYNCING TO /OPT"));
+            }
 
             QString cmd;
             bool error = false;
@@ -908,6 +913,7 @@ bool Worker::syncCustomerRepositoryAndFS() {
                 if (!error) {
                     Command c("bash");
                     qInfo() << "EXECUTING CMD..." << cmd;
+                    Utils::printInfoMsg(QString("EXECUTING CMD %1...").arg(cmd));
                     if (c.execute(m_customerRepository, QStringList() << "-c" << cmd)) {
                         QStringList result = c.getCommandResult().split('\n');
                         QString const &p1 = "send_files mapped ";
@@ -1082,9 +1088,7 @@ PSAInstalled Worker::getPSAInstalled() {
     QString printSysDir("/etc/psa_config");
     QString tariffSysDir("/etc/psa_tariff");
     QString tariffRepoDir("etc/psa_tariff");
-    QString opkgSysDir("/etc/psa_update");
     QString opkgRepoDir("etc/psa_update");
-    QString const &absPathNameOpkg = QDir::cleanPath(opkgSysDir + QDir::separator() + "opkg_commands");
     QString const &absPathNameRepositoryOpkg = QDir::cleanPath(opkgRepoDir + QDir::separator() + "opkg_commands");
     QString absPathName;
     QString absPathNameRepository;
@@ -1093,7 +1097,7 @@ PSAInstalled Worker::getPSAInstalled() {
     psaInstalled.versionInfo.reason = "";
     psaInstalled.versionInfo.created = "";
 
-    QStringList versionInfo = m_gc.gitShowReason();
+    QStringList versionInfo = m_gc.gitShowReason(m_branchName);
     if (versionInfo.size() == 3) {
         psaInstalled.versionInfo.lastCommit = versionInfo.at(0);
         psaInstalled.versionInfo.reason = versionInfo.at(1);
@@ -1115,12 +1119,12 @@ PSAInstalled Worker::getPSAInstalled() {
     psaInstalled.tariff.info = "N/A";
     psaInstalled.tariff.version = "N/A";
 
-    psaInstalled.hw.linuxVersion = m_osVersion;
+    psaInstalled.hw.linuxVersion = getOsVersion();
     psaInstalled.hw.cpuSerial = m_cpuSerial;
 
-    psaInstalled.opkg.blob = m_gc.gitBlob(absPathNameOpkg);
-    psaInstalled.opkg.size = getFileSize(absPathNameOpkg);
-    psaInstalled.opkg.loadTime = Utils::getTariffLoadTime(absPathNameOpkg);
+    psaInstalled.opkg.blob = m_gc.gitBlob(absPathNameRepositoryOpkg);
+    psaInstalled.opkg.size = getFileSize(absPathNameRepositoryOpkg);
+    psaInstalled.opkg.loadTime = Utils::getTariffLoadTime(absPathNameRepositoryOpkg);
     psaInstalled.opkg.lastCommit = m_gc.gitLastCommit(absPathNameRepositoryOpkg);
 
     psaInstalled.dc.versionHW = deviceControllerVersionHW;
@@ -1129,7 +1133,9 @@ PSAInstalled Worker::getPSAInstalled() {
     psaInstalled.dc.gitLastCommit = "N/A";
     psaInstalled.dc.size = -1;
 
-    psaInstalled.sw.apismVersion = m_apismVersion;
+    if (std::optional<QString> v = getApismVersion()) {
+        psaInstalled.sw.apismVersion = v.value();
+    }
     psaInstalled.sw.atbQTVersion = m_atbqtVersion;
 
     psaInstalled.pluginVersion.deviceController = m_pluginVersionATBDeciceController;

worker.h

@@ -190,8 +190,8 @@ public slots:
     void update();
 
 private slots:
-    bool updateTriggerSet();
-    bool customerEnvironment();
+    bool updateTriggerSet(int progress);
+    bool customerEnvironment(int progress);
     bool filesToUpdate();
     bool updateFiles(quint8 percent);
     bool syncCustomerRepositoryAndFS();