UpdatePTUDevCtrl/DCPlugin/include/datIf.h

342 lines
11 KiB
C
Raw Permalink Normal View History

// Data Interface between slave (DC) and pi buffer
// determines sending and receiving order of data
// cares for storing input data and restoring output data
#ifndef DIF_H
#define DIF_H
#include <stdint.h>
#include "tslib.h"
#include "prot.h"
#include "dcBL.h"
#include <QMainWindow>
#include <QString>
#include <QTimer>
#include <QDebug>
#include <QDateTime>
#include <QDate>
#include <QTime>
#define CMD2DC_sendTime 20
#define CMD2DC_setWakeFrequ 112
#define CMD2DC_MOV_UPLOCK 113
#define CMD2DC_MOV_DNLOCK 114
#define CMD2DC_UPPER_DOOR 115
#define CMD2DC_LOWER_DOOR 116
#define CMD2DC_VAULT_DOOR 117
#define CMD2DC_REJMOT_ON 118
#define CMD2DC_REJMOT_RUN 119
#define CMD2DC_LED_COIN 100
#define CMD2DC_LED_ILLU 101
#define CMD2DC_LED_TICKET 102
#define CMD2DC_LED_START 104
#define CMD2DC_LED_PIN 103
#define CMD2DC_LED_IN 105
#define CMD2DC_FAN 106
#define CMD2DC_SIREN 107
#define CMD2DC_BARRIER 108
#define CMD2DC_WAKEPTU 109
#define CMD2DC_SWITCHAUXPWR 110
#define CMD2DC_SWITCHAUXDDR 18
#define CMD2DC_SWITCHAUXOUT 19
#define CMD2DC_UCONTACTON 111
#define CMD2DC_DEVICE_PARAM 23
#define CMD2DC_SEND_MACH_ID 11
#define CMD2DC_RDBK_DEV_PARA 14
#define CMD2DC_RDBK_MACH_ID 15
#define CMD2DC_MDB_ON 120
#define CMD2DC_MDB_GET_STATE 107 // REQ
#define CMD2DC_MDB_DORESET 121
#define CMD2DC_MDB_SETWAK 122
//#define CMD2DC_MDB_GETWAK 0x2812 // REQ not nec.
#define CMD2DC_MDB_SENDCMD 123
#define CMD2DC_MDB_SENDMSG 12
#define CMD2DC_MDB_GETRESP 22 // REQ
#define CMD2DC_EMP_SET 24
#define CMD2DC_EMP_GET_ALL 23 // REQ
#define CMD2DC_EMP_STARTPOLL 124
#define CMD2DC_EMP_STARTPAY 125
#define CMD2DC_EMP_STOPPAY 126
#define CMD2DC_EMP_GOTCOIN 108 // REQ
#define CMD2DC_SHUTTER_OPEN 129
#define CMD2DC_ESCR_OPEN 132
#define CMD2DC_ESCR_TAKE 133
#define CMD2DC_ESCR_RETURN 134
#define CMD2DC_MOD_ON 135
#define CMD2DC_MOD_WAK 136
#define CMD2DC_CRED_ON 137
#define CMD2DC_CRED_WAK 138
// READ Commands ((e.g. get input)
#define CMD2DC_TestSerial 10
#define CMD2DC_GetSerialConfig 105
#define CMD2DC_RdBkHWversion 11
#define CMD2DC_RdBkSWversion 12
#define CMD2DC_RdBkDCstate 101
#define CMD2DC_RdBkUID 18
#define CMD2DC_RdBkTime 104
#define CMD2DC_RdBkAnalog 106
#define CMD2DC_GetAllInputs 102
#define CMD2DC_RdBkAllOutputs 103
#define CMD2DC_MIFREADERON 127
#define CMD2DC_ATB_CREATE 128
// Mif read data:
#define CMD2DC_RdBk_MifState 109
#define CMD2DC_RdBk_MifData 24
#define CMD2DC_RdBk_AtbCardType 25
#define CMD2DC_SHUTTER_COIN 131
#define CMD2DC_SHUTTER_OPEN3S 130
#define CMD2DC_SEND_SHUT_TIME 0x2915
#define CMD2DC_ESCR_TAKE 133
#define CMD2DC_ESCR_RETURN 134
#define CMD2DC_PRINTERON 139
#define CMD2DC_RdBk_PrnState 110
#define CMD2DC_RdBk_PrnFonts 26
#define CMD2DC_RdBk_AllPrnData 27
// nr of params:
#define CMD2DC_PRI_SYS_CMD 25 // 3
#define CMD2DC_PRI_ESC_CMD 26 // 4
#define CMD2DC_PRI_SETUP 27 // 5
#define CMD2DC_PRI_MOVE 140 // 2
#define CMD2DC_PRI_SETFONT 141 // 4
#define CMD2DC_PRI_SETLETTER 142 // 3
#define CMD2DC_PRI_CUT 143 // 1
#define CMD2DC_PRI_PRINT_TXT 13 // 64
#define CMD2DC_PRI_LF 144 // 1
#define CMD2DC_PRI_PRIFONTTABLE 145
#define CMD2DC_PRI_BARCODE 14 // ca 15...25
#define CMD2DC_STOR_QR_DATA 15 // 150
#define CMD2DC_PRI_QR_CODE 146 // 0
#define CMD2DC_PRI_LOGOFROMFLASH 147 // 2
#define CMD2DC_PRI_STORE_DOC 16 // 1
#define CMD2DC_PRI_DOCUMENT_NR 17 // 1 + 64
#define CMD2DC_PRI_CLEAR_DOC 148 // 1
/*
// WRITE Commands (e.g. switch relay)
#define CMD2DC_sendTime 0x1310
#define CMD2DC_setWakeFrequ 0x1320
#define CMD2DC_MOV_UPLOCK 0x1801
#define CMD2DC_MOV_DNLOCK 0x1802
#define CMD2DC_UPPER_DOOR 0x1810
#define CMD2DC_LOWER_DOOR 0x1811
#define CMD2DC_VAULT_DOOR 0x1812
// neu 7.10.21:
#define CMD2DC_REJMOT_ON 0x1813
#define CMD2DC_REJMOT_RUN 0x1814
#define CMD2DC_LED_COIN 0x1204
#define CMD2DC_LED_ILLU 0x1205
#define CMD2DC_LED_TICKET 0x1206
#define CMD2DC_LED_START 0x1208
#define CMD2DC_LED_PIN 0x1207
#define CMD2DC_LED_IN 0x1209
#define CMD2DC_FAN 0x1210
#define CMD2DC_SIREN 0x1211
#define CMD2DC_BARRIER 0x1212
#define CMD2DC_WAKEPTU 0x1218
#define CMD2DC_SWITCHAUXPWR 0x1220
#define CMD2DC_SWITCHAUXDDR 0x1222
#define CMD2DC_SWITCHAUXOUT 0x1224
#define CMD2DC_UCONTACTON 0x1226
#define CMD2DC_DEVICE_PARAM 0x2000
#define CMD2DC_SEND_MACH_ID 0x2002
#define CMD2DC_RDBK_DEV_PARA 0x2001
#define CMD2DC_RDBK_MACH_ID 0x2003
// --------------------------- MDB --------------
#define CMD2DC_MDB_ON 0x2800
#define CMD2DC_MDB_GET_STATE 0x2801 // REQ
#define CMD2DC_MDB_DORESET 0x2802
#define CMD2DC_MDB_SETWAK 0x2811
//#define CMD2DC_MDB_GETWAK 0x2812 // REQ not nec.
#define CMD2DC_MDB_SENDCMD 0x2820
#define CMD2DC_MDB_SENDMSG 0x2821
#define CMD2DC_MDB_GETRESP 0x2822 // REQ
// --------------------------- EMP --------------
#define CMD2DC_EMP_SET 0x2830
#define CMD2DC_EMP_GET_ALL 0x2831 // REQ
#define CMD2DC_EMP_STARTPOLL 0x2832
#define CMD2DC_EMP_STARTPAY 0x2834
#define CMD2DC_EMP_STOPPAY 0x2836
#define CMD2DC_EMP_GOTCOIN 0x2837 // REQ
#define CMD2DC_SHUTTER_OPEN 0x2911
#define CMD2DC_ESCR_OPEN 0x2920
#define CMD2DC_ESCR_TAKE 0x2921
#define CMD2DC_ESCR_RETURN 0x2922
#define CMD2DC_MOD_ON 0x2940
#define CMD2DC_MOD_WAK 0x2941
#define CMD2DC_CRED_ON 0x2960
#define CMD2DC_CRED_WAK 0x2961
// READ Commands ((e.g. get input)
#define CMD2DC_TestSerial 0x1101
#define CMD2DC_GetSerialConfig 0x1107
#define CMD2DC_RdBkHWversion 0x110A
#define CMD2DC_RdBkSWversion 0x110B
#define CMD2DC_RdBkDCstate 0x110C
#define CMD2DC_RdBkUID 0x1305
#define CMD2DC_RdBkTime 0x1313
#define CMD2DC_RdBkAnalog 0x1550
#define CMD2DC_GetAllInputs 0x1201
#define CMD2DC_RdBkAllOutputs 0x1202
#define CMD2DC_MIFREADERON 0x2900
#define CMD2DC_ATB_CREATE 0x2907
// Mif read data:
#define CMD2DC_RdBk_MifState 0x2902
#define CMD2DC_RdBk_MifData 0x2903
#define CMD2DC_RdBk_AtbCardType 0x2905
//#define CMD2DC_RdBk_CardData 0x2906
// higher Level operation commands
//#define CMD2DC_SHUTTER_ONE 0x2912
#define CMD2DC_SHUTTER_COIN 0x2913
#define CMD2DC_SHUTTER_OPEN3S 0x2912
#define CMD2DC_SEND_SHUT_TIME 0x2915
#define CMD2DC_ESCR_TAKE 0x2921
#define CMD2DC_ESCR_RETURN 0x2922
#define CMD2DC_PRINTERON 0x2A01
#define CMD2DC_RdBk_PrnState 0x2A02
#define CMD2DC_RdBk_PrnFonts 0x2A12
#define CMD2DC_RdBk_AllPrnData 0x2A40
// nr of params:
#define CMD2DC_PRI_SYS_CMD 0x2A03 // 3
#define CMD2DC_PRI_ESC_CMD 0x2A04 // 4
#define CMD2DC_PRI_SETUP 0x2A05 // 5
#define CMD2DC_PRI_MOVE 0x2A06 // 2
#define CMD2DC_PRI_SETFONT 0x2A10 // 4
#define CMD2DC_PRI_SETLETTER 0x2A11 // 3
#define CMD2DC_PRI_CUT 0x2A13 // 1
#define CMD2DC_PRI_PRINT_TXT 0x2A14 // 64
#define CMD2DC_PRI_LF 0x2A15 // 1
#define CMD2DC_PRI_PRIFONTTABLE 0x2A16
#define CMD2DC_PRI_BARCODE 0x2A17 // ca 15...25
#define CMD2DC_STOR_QR_DATA 0x2A18 // 150
#define CMD2DC_PRI_QR_CODE 0x2A19 // 0
#define CMD2DC_PRI_LOGOFROMFLASH 0x2A1A // 2
#define CMD2DC_PRI_STORE_DOC 0x2A41 // 1
#define CMD2DC_PRI_DOCUMENT_NR 0x2A42 // 1 + 64
#define CMD2DC_PRI_CLEAR_DOC 0x2A43 // 1
*/
#define FIX_SLAVE_ADDR 0
#define SEND_ATONCE 1
#define SENDCOMBINED 0
class T_datif : public QMainWindow
{
Q_OBJECT
char sendINrequestsAutomatic(void);
// sende alle Befehle um die Eingangsdaten abzufragen der Reihe nach
char loadRecDataFromFrame();
void datif_startSending(void);
void datif_sendIOrequest(uint16_t WRcmd, uint16_t RDcmd, uint8_t nrOfWrData);
void datif_send8byteOutCmd(uint16_t WRcmd, uint16_t RDcmd);
bool verifyLineTestresponse(uint8_t RdDlen, uint8_t *receivedData);
void datif_OUT_setTime(void);
uint8_t datif_OUT_SendRandomData(uint8_t *buf, uint8_t Length);
void datif_send64byteOutCmd(uint16_t WRcmd, uint16_t addr, uint16_t RDcmd);
void datif_sendToMemory(uint16_t WRcmd, uint16_t docNr, uint16_t blockNr, uint8_t *data64);
// send printer documents to DC2 memory
// docNr: 0...15(31) with 1280 byte each (20 blocks a 64byte)
// blockNr=0...19 with 64byte each
// docNr =transmitted in WRITEADDRESS high byte
// blockNr=transmitted in WRITEADDRESS low byte
T_prot *myDCIF;
QTimer *datif_trigger;
uint8_t selectedSlaveAddr;
private slots:
char datif_cycleSend();
void StoredRecData();
public:
T_datif(QWidget *parent = nullptr);
T_prot *getProt() { return myDCIF; }
T_prot const *getProt() const { return myDCIF; }
void resetChain(void);
char isPortOpen(void);
void sendWRcommand(uint16_t nxtAsCmd);
// Sende Schreibbefehle die bereits vorher asynchron gespeichert wurden
void send_requests(uint16_t nextWrCmd);
void sendHighLevel(uint16_t nxtHLCmd);
bool areDataValid(void);
signals:
void ResponseRecieved();
//the requested data are stored in peripheral image
// can be loaded with epi
Squashed 'DCPlugin/' changes from 3e3e1ef..652ad9b 652ad9b Included changes of TS for version 3.5. c85b090 Added ulong2uchar (version 3.5). 87a6ed0 Include changes of Thomas for version 3.5. 99c88c7 Included changes of Thomas for version 3.5. prn_getPrintResult(), 712ea0f Included changes of Thomas for version 3.5 of library: datif_templatePrintFinished_OK(), datif_templatePrintFinished_Err(), datif_gotNewCoin(). 86311de Add use of shared memory. Add changes for version 3.4. of library. cb44127 Added check4freeFDshortCmd. a95e174 Included some changes of Thomas. c724b5b Shift several device controller related variables to shared memory. ef79321 Massive change: using shared memory containing most device controller realted variables. a7aa75a Massive change: using shared memory containing devcie controller variables. dc00c69 Added check4freeFDlongCmd. eeb3519 Adding shared memory containing all variables necessary to check device controller related variables. 30338e2 Changed struct T_moduleCondition. Changed struct T_dynamicCondition. Added struct T_extTime. Added log_chkIfVaultRecordAvailable(). Added sys_getDeviceConditions(). set version to 3.4. 58fdea4 Added m_sharedMem. Added cash_getAmountInVault. Added cash_getNrCoinsInVault. Added sys_getDynMachineConditions() with new interface. Added sys_getDeviceConditions() with new interface. Added log_chkIfVaultRecordAvailable(). df760f1 Added shared_mem_buffer.h/.cpp. git-subtree-dir: DCPlugin git-subtree-split: 652ad9b43d24bddbc3c2636c4ff4b5d74e081e46
2023-04-18 13:43:37 +02:00
void datif_templatePrintFinished_OK();
void datif_templatePrintFinished_Err();
void datif_gotNewCoin();
};
#endif // CI_H