#ifndef DCBL_H
#define DCBL_H
#include <stdint.h>
#include "qbytearray.h"
#include "qstring.h"
#include <QFile>

uint8_t dcBL_prepareDC_BLcmd(uint8_t Cmd, uint8_t SendDataLength, uint8_t *sendData, uint8_t *outBuf);
// make BL protocol, retval = outbuf length (5...133)
// bring data in correct form: start always with 0x02   finish with 0x03 and append checksum
// 0x02 Cmd < ...sendData ..>  CRC  CRC 0x03
// Data length = 0...64
// special conversion: if data contain 2 or 3 (STX, ETX) then write two bytes:  0x1B (=ESC) and data|0x80
// so maxlength = 5 + 2 x 64 (if all data are 2 or 3)  without 2,3: maxlength = 5 + 64

uint8_t dcBL_readBLversion(uint8_t *sendData);
    // minimum size of sendData-buffer: 5byte  retval: length

uint8_t dcBL_readFWversion(uint8_t *sendData);
    // minimum size of sendData-buffer: 5byte  retval: length

uint8_t dcBL_exitBL(uint8_t *sendData);
    // minimum size of sendData-buffer: 5byte  retval: length

uint8_t dcBL_sendFlashStartAddr2BL(uint32_t startAddr, uint8_t *sendData);
    // minimum size of sendData-buffer: 13byte    retval: length (9...13)

uint8_t dcBL_writeLastPage(uint8_t *sendData);
    // minimum size of sendData-buffer: 5byte  retval: length

uint8_t dcBL_restartDC(uint8_t *sendData);
    // minimum size of sendData-buffer: 20 byte  retval: length

uint8_t dcBL_activatBootloader(uint8_t *sendData);
    // minimum size of sendData-buffer: 20 byte  retval: length

uint8_t dcBL_getResponse(uint8_t *respBuff);
    // retval: nr of received bytes

bool dcBL_responseOK();
    // retval: 0: response OK (cmd |0x80)    1: response error (cmd or "0xe0")

bool dcBL_importBinFile(QByteArray readBinFile, uint32_t fileSize, char withDispl);



bool dcBL_isTextMemFree(void);

void dcBL_writeText(QString newTxt);

bool dcBL_checkForText(void);
    // if pointer at 0 then no more content

QString dcBL_readText(void);
    // read from 0...9 (oldest first)



void dcBL_iniChain(void);

uint8_t dcBL_startChain(void);

uint8_t dcBL_runChain(void);

void dcBL_iniLoading(void);

void dcBL_startLoading(void);

uint8_t dcBL_sendHexfile(void);


uint8_t dcBL_getResult(void);
// call after every step to what's going on....
//  1: connected to BL
//  2: transmission started
//  3: transmission successful



#define RAW_BL_DATALEN      150
void gpi_storeRawReceivedData(uint8_t  RdDlen, uint8_t *receivedData);

uint8_t epi_getRawReceivedData(uint8_t *receivedData);
    // retval=length, will be zeroed after first reading

uint8_t epi_getRawRecLength(void);
    // retval=length

QString epi_getRawReceivedString();

void epi_clrRawReceivedString();


uint8_t dcBL_sendSuccess(uint8_t lastCommand);
    // return val: 0: no response by now  1:error  10: OK
    // lastCommand=0x21 for sendAddr or 0x22 for send data

char dcBL_loadBinary(char withDisplay);



#endif // DCBL_H