Add (obsolete?) directory
This commit is contained in:
parent
0b87f44e64
commit
49396c22ee
852
plugins/interfaces.h
Normal file
852
plugins/interfaces.h
Normal file
@ -0,0 +1,852 @@
|
|||||||
|
#ifndef INTERFACE_H
|
||||||
|
#define INTERFACE_H
|
||||||
|
|
||||||
|
#include <QtPlugin>
|
||||||
|
|
||||||
|
|
||||||
|
struct Tprn_hw_state
|
||||||
|
{
|
||||||
|
// hardware (IO's)
|
||||||
|
bool powerRdBk; // prn pwr is on
|
||||||
|
bool rsSwOk; // serial switch (printer or modem) is set to printer
|
||||||
|
bool rsDrvOk; // RS232 converter for PTU, Printer and Modem in on
|
||||||
|
|
||||||
|
bool ReadyLine; // HW signal from printer showing ready
|
||||||
|
bool inIdle; // powered and free from errors
|
||||||
|
bool paperNearEnd; // paper roll runs out
|
||||||
|
bool noPaper;
|
||||||
|
bool ErrorTemp;
|
||||||
|
bool HeadOpen;
|
||||||
|
bool cutterJam;
|
||||||
|
bool noResponse; // printer is not connected, cable broken, wrong baudrate
|
||||||
|
bool badResponse;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct Tprn_currentSettings
|
||||||
|
{
|
||||||
|
uint8_t currFont;
|
||||||
|
uint8_t currSize;
|
||||||
|
uint8_t currHeigth;
|
||||||
|
uint8_t currWidth;
|
||||||
|
bool nowBold;
|
||||||
|
bool nowInvers;
|
||||||
|
bool nowUnderlined;
|
||||||
|
uint8_t currDensity;
|
||||||
|
uint8_t currSpeed;
|
||||||
|
bool nowAligned;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct T_dynDat
|
||||||
|
{
|
||||||
|
uint8_t licensePlate[8];
|
||||||
|
uint8_t vendingPrice[8];
|
||||||
|
uint8_t parkingEnd[8];
|
||||||
|
uint8_t currentTime[8];
|
||||||
|
uint8_t currentDate[8];
|
||||||
|
uint8_t dynDat5[8];
|
||||||
|
uint8_t dynDat6[8];
|
||||||
|
uint8_t dynDat7[8];
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
struct T_emp
|
||||||
|
{
|
||||||
|
|
||||||
|
// Fixdata from EMP:
|
||||||
|
uint8_t shaft; // = changer level
|
||||||
|
uint16_t countryCode;
|
||||||
|
uint8_t scale;
|
||||||
|
uint8_t decimals;
|
||||||
|
uint8_t coinValues[16];
|
||||||
|
uint16_t routing;
|
||||||
|
|
||||||
|
// Master specs:
|
||||||
|
uint8_t gotSetup; // 1: got specifications from master 0: no specs
|
||||||
|
uint16_t coinAccept; // bit 0 = coin1 bit H=accept
|
||||||
|
uint8_t tokenChannel;
|
||||||
|
uint16_t denomination[16];
|
||||||
|
|
||||||
|
// dynamic:
|
||||||
|
uint8_t state; // step counter of EMP (electronic coin checker) FSM (finite state machine):
|
||||||
|
// 0=Emp & Bus power off, 1=powered, poll off 2=polling on
|
||||||
|
// 3=device responded, requesting status
|
||||||
|
// 4=waiting for status 5=have status,
|
||||||
|
// 6: IDLE, have paramters from master, polling running, ready for payment
|
||||||
|
// Master can stop/start polling and acceptance
|
||||||
|
// 7: end of transaction, polling on, accept off, reporting coins, (wait for last coin)
|
||||||
|
// 8: transaction running, polling on, acceptance on, reporting coins,
|
||||||
|
|
||||||
|
uint8_t pollingRunning;
|
||||||
|
uint8_t paymentRunning;
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
class hwinf
|
||||||
|
{
|
||||||
|
|
||||||
|
public:
|
||||||
|
virtual ~hwinf() {}
|
||||||
|
|
||||||
|
virtual void dc_openSerial(int BaudNr, QString BaudStr, QString ComName, uint8_t connect) const =0;
|
||||||
|
|
||||||
|
virtual void dc_closeSerial(void) const =0;
|
||||||
|
|
||||||
|
virtual bool dc_isPortOpen(void) const =0;
|
||||||
|
|
||||||
|
virtual void dc_autoRequest(bool on) const =0;
|
||||||
|
// select if READ-Requests are sent manually one by one or automatically
|
||||||
|
// automatically request ALL digital and analog sensors, get time/date, get status information
|
||||||
|
|
||||||
|
virtual void dc_requTestResponse() const =0;
|
||||||
|
|
||||||
|
|
||||||
|
virtual bool dc_readAnswTestResponse() const =0;
|
||||||
|
// retval: true: test was successful, got right response
|
||||||
|
|
||||||
|
virtual uint8_t dc_isRequestDone(void) const =0;
|
||||||
|
// retval: 0: request is still in progress
|
||||||
|
// 1: answer from DC2 was OK
|
||||||
|
// 2: wrong answer from DC2
|
||||||
|
|
||||||
|
virtual uint16_t dc_getCompletePayLoad(uint16_t plBufSiz, uint8_t *payLoad) const =0;
|
||||||
|
// get data back in *pl, max 64 byte, can be used for diagnosis
|
||||||
|
// retval = nr of bytes received. If host buffer too small then
|
||||||
|
// only plBufSíz bytes are copied to pl
|
||||||
|
// plBufSíz=size of host buffer
|
||||||
|
|
||||||
|
virtual void dc_setWakeFrequency(uint8_t period) const =0;
|
||||||
|
// RTC wakes DC2 (and PTU) by hardware signal every 32seconds
|
||||||
|
// change wake signal period to 1...64s
|
||||||
|
|
||||||
|
virtual void dc_OrderToReset(void) const =0;
|
||||||
|
// want DC2 to reset (in order to start Bootloader)
|
||||||
|
|
||||||
|
virtual QString dc_getSerialState(void) const =0;
|
||||||
|
virtual void dc_clrSerialStateText(void) const =0;
|
||||||
|
|
||||||
|
virtual void bl_sendDataDirectly(uint8_t length, uint8_t *buf) const =0;
|
||||||
|
// send without protocol frame, needed for the DC bootloader
|
||||||
|
|
||||||
|
virtual uint8_t getRawRecLength(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t getRawReceivedData(uint8_t *receivedData) const =0;
|
||||||
|
|
||||||
|
virtual QString dc_getSerialParams(void) const =0;
|
||||||
|
|
||||||
|
virtual QString dc_getHWversion(void) const =0;
|
||||||
|
|
||||||
|
virtual QString dc_getSWversion(void) const =0;
|
||||||
|
|
||||||
|
virtual QString dc_getState(void) const =0;
|
||||||
|
|
||||||
|
virtual QString dc_getTxt4RsDiagWin(void) const =0;
|
||||||
|
virtual void dc_clrTxt4RsDiagWin(void) const =0;
|
||||||
|
virtual QString dc_get2ndTxt4RsDiagWin(void) const =0;
|
||||||
|
virtual void dc_clr2ndTxt4RsDiagWin(void) const =0;
|
||||||
|
virtual QString dc_getTxt4HsStateLine(void) const =0;
|
||||||
|
virtual void dc_clrTxt4HsStateLine(void) const =0;
|
||||||
|
virtual QString dc_getTxt4masterStateLine(void) const =0;
|
||||||
|
virtual void dc_clrTxt4masterStateLine(void) const =0;
|
||||||
|
virtual QString dc_getTxt4resultStateLine(void) const =0;
|
||||||
|
virtual void dc_clrTxt4resultStateLine(void) const =0;
|
||||||
|
virtual QString dc_getdataStateLine(void) const =0;
|
||||||
|
virtual void dc_clrTxt4dataStateLine(void) const =0;
|
||||||
|
virtual QString dc_getdatifLine(void) const =0;
|
||||||
|
virtual void dc_clrTxt4datifLine(void) const =0;
|
||||||
|
|
||||||
|
// using DC2 Bootloader
|
||||||
|
virtual void bl_iniChain(void) const =0;
|
||||||
|
virtual bool bl_importBinFile(QByteArray readBinFile, uint32_t fileSize, char withDispl) const =0;
|
||||||
|
virtual uint8_t bl_activatBootloader(uint8_t *sendData) const =0;
|
||||||
|
virtual uint8_t bl_startChain(void) const =0;
|
||||||
|
virtual uint8_t bl_readBLversion(uint8_t *sendData) const =0;
|
||||||
|
// minimum size of sendData-buffer: 5byte retval: length
|
||||||
|
virtual uint8_t bl_readFWversion(uint8_t *sendData) const =0;
|
||||||
|
// minimum size of sendData-buffer: 5byte retval: length
|
||||||
|
|
||||||
|
virtual uint8_t bl_prepareDC_BLcmd(uint8_t Cmd, uint8_t SendDataLength, uint8_t *sendData, uint8_t *outBuf) const =0;
|
||||||
|
// make BL protocol, retval = outbuf length (5...133)
|
||||||
|
// bring data in correct form: start always with 0x02 finish with 0x03 and append checksum
|
||||||
|
// 0x02 Cmd < ...sendData ..> CRC CRC 0x03
|
||||||
|
// Data length = 0...64
|
||||||
|
// special conversion: if data contain 2 or 3 (STX, ETX) then write two bytes: 0x1B (=ESC) and data|0x80
|
||||||
|
// so maxlength = 5 + 2 x 64 (if all data are 2 or 3) without 2,3: maxlength = 5 + 64
|
||||||
|
|
||||||
|
virtual uint8_t bl_exitBL(uint8_t *sendData) const =0;
|
||||||
|
// minimum size of sendData-buffer: 5byte retval: length
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
// Level 2 DC2-onboard devices
|
||||||
|
// WR: set time
|
||||||
|
// RD. get time, get measure, get test results
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
// get UID, get time/date test results memory, RTC analog values
|
||||||
|
|
||||||
|
struct Trtc_DateTime
|
||||||
|
{
|
||||||
|
uint8_t rtc_hour;
|
||||||
|
uint8_t rtc_min;
|
||||||
|
uint8_t rtc_sec;
|
||||||
|
uint8_t rtc_dayOfMonth;
|
||||||
|
uint8_t rtc_month;
|
||||||
|
uint8_t rtc_year;
|
||||||
|
uint8_t rtc_dayOfWeek;
|
||||||
|
};
|
||||||
|
|
||||||
|
virtual uint8_t rtc_getDateTime(struct Trtc_DateTime *rtc_DateTime) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t rtc_setDateTime(void) const =0;
|
||||||
|
// synch DC2 with PC or PTU system time and date
|
||||||
|
|
||||||
|
virtual void rtc_getTime(uint8_t *hh, uint8_t *mm, uint8_t *ss) const =0;
|
||||||
|
// get time directly
|
||||||
|
|
||||||
|
virtual void rtc_getDate(uint8_t *yy, uint8_t *mm, uint8_t *dd) const =0;
|
||||||
|
// get date directly
|
||||||
|
|
||||||
|
virtual uint8_t rtc_getToday(uint8_t *dow, uint16_t *minOfToday, uint32_t *secOfToday) const =0;
|
||||||
|
// dow=day of week, 1=monday...7
|
||||||
|
// minOfToday: 0=midnight...1439= 23:59
|
||||||
|
// secOfToday: 0=midnight...86399= 23:59:59
|
||||||
|
|
||||||
|
virtual bool rtc_isLeapYear(uint8_t *lastLeapYear, uint8_t *NextLeapYear) const =0;
|
||||||
|
// retval true: this year is leap year
|
||||||
|
|
||||||
|
virtual bool rtc_isLeapYear() const =0;
|
||||||
|
|
||||||
|
virtual void rtc_getWeek(uint8_t *DayOfWeek, uint8_t *HoursOfWeek, uint16_t *MinutesOfWeek) const =0;
|
||||||
|
// DayOfWeek: 1=monday...7
|
||||||
|
// HoursOfWeek: 0=Monday 0:00 o'clock...167=Sunday 23:00
|
||||||
|
// MinutesOfWeek: 0=Monday 0:00 o'clock...10079=Sunday 23:59
|
||||||
|
|
||||||
|
virtual void rtc_getMonth(uint8_t *DayOfMonth, uint16_t *HoursOfMonth, uint16_t *MinutesOfMonth) const =0;
|
||||||
|
// DayOfMonth: 1...31
|
||||||
|
// HoursOfMonth: 0 = 0:00o'clock of 1.day in month up to 743
|
||||||
|
// MinutesOfMonth:0 = 0:00o'clock of 1.day in month up to 44639
|
||||||
|
|
||||||
|
virtual void rtc_getYear(uint16_t *DayOfYear, uint16_t *HoursOfYear, uint32_t *MinutesOfYear) const =0;
|
||||||
|
// DayOfYear: 1...366 1= 1.Jan of this current year
|
||||||
|
// HoursOfYear: 0=1.Jan 0:00o'clock ...8783=31.12 23 o'clock
|
||||||
|
// MinutesOfYear: 0=1.Jan 0:00o'clock ...527039=31.12 23:59 o'clock
|
||||||
|
|
||||||
|
virtual QString rtc_getTimStr(void) const =0;
|
||||||
|
virtual QString rtc_getDatStr(void) const =0;
|
||||||
|
virtual QString rtc_getTimDatStr(void) const =0;
|
||||||
|
|
||||||
|
// UID
|
||||||
|
virtual void dc_getUID8byte(uint8_t *buf8byteUid) const =0;
|
||||||
|
virtual QString dc_getUIDstr() const =0;
|
||||||
|
virtual uint64_t dc_getUIDnumber(void) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
// Analog inputs:
|
||||||
|
virtual uint32_t dc_getTemperature(void) const =0; // in Sax-Format 0...400 (0=-50,0°C 100=0,0°C 141=20,5°C 400=150,0°C)
|
||||||
|
virtual QString dc_getTemperaturStr(void) const =0;
|
||||||
|
|
||||||
|
virtual uint32_t dc_getVoltage(void) const =0; // in mV, 0...65,535V
|
||||||
|
virtual QString dc_getVoltagStr(void) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
// Level 3: digital outputs and simple switching of connected devices
|
||||||
|
// simple processes like flashing a led or open flap for 1s
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
virtual void lock_switchContactPower(bool on) const =0;
|
||||||
|
|
||||||
|
// Locks move until stop cmd (0)
|
||||||
|
virtual uint8_t lock_switchUpperLock(uint8_t dir) const =0;
|
||||||
|
// dir 0=off 1=up 2=down
|
||||||
|
virtual uint8_t lock_switchLowerLock(uint8_t dir) const =0;
|
||||||
|
// dir 0=off 1=up 2=down
|
||||||
|
|
||||||
|
// LEDs
|
||||||
|
virtual void led_switchLedIllumination(uint8_t on) const =0;
|
||||||
|
virtual void led_switchLedService(uint8_t on) const =0;
|
||||||
|
virtual void led_switchLedPaper(uint8_t on, uint8_t ton, uint8_t tof) const =0;
|
||||||
|
virtual void led_switchLedPinPad(uint8_t on, uint8_t ton, uint8_t tof) const =0;
|
||||||
|
virtual void led_switchLedStart(uint8_t on, uint8_t ton, uint8_t tof) const =0;
|
||||||
|
virtual void led_switchLedCoinbassin(uint8_t on, uint8_t ton, uint8_t tof) const =0;
|
||||||
|
|
||||||
|
virtual void fan_switchFan(bool on) const =0;
|
||||||
|
virtual void laerm_switchSiren(bool on) const =0;
|
||||||
|
virtual void bar_OpenBarrier(bool open) const =0;
|
||||||
|
virtual void ptu_switchWake(bool WAKEACTIVE) const =0;
|
||||||
|
|
||||||
|
virtual void prn_switchPower(bool on) const =0;
|
||||||
|
|
||||||
|
virtual void mif_readerOn(bool on) const =0;
|
||||||
|
|
||||||
|
virtual void shut_move(bool open) const =0;
|
||||||
|
virtual void esc_moveFlaps(uint8_t flap ) const =0;
|
||||||
|
// 0: close both 1: open take-flap 2: open return
|
||||||
|
|
||||||
|
virtual void mdb_switchPower(bool on) const =0;
|
||||||
|
virtual void mdb_switchWake(bool WAKEACTIVE) const =0;
|
||||||
|
|
||||||
|
virtual void mod_switchPower(bool on) const =0;
|
||||||
|
virtual void credit_switchPower(bool on) const =0;
|
||||||
|
|
||||||
|
virtual void aux_power(bool on) const =0;
|
||||||
|
virtual void aux_setUsage(uint8_t PinDirection) const =0;
|
||||||
|
virtual void aux_setOutputs(uint8_t PinIsHigh) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
virtual void mod_switchWake(bool WAKEACTIVE) const =0;
|
||||||
|
|
||||||
|
virtual void credit_switchWake(bool WAKEACTIVE) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
// Level 3: digital inputs of connected devices
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
virtual bool door_isContactPowerOn(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t door_getSwitches(void) const =0;
|
||||||
|
// retval: bit0: upper door 1: low door 2:vault door
|
||||||
|
|
||||||
|
virtual bool door_isUpperDoorOpen(void) const =0;
|
||||||
|
|
||||||
|
virtual bool door_isLowerDoorOpen(void) const =0;
|
||||||
|
|
||||||
|
virtual bool vault_isVaultDoorOpen(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t vault_getSwitches(void) const =0;
|
||||||
|
// retval bit0: cash box, bit 1: bill box
|
||||||
|
|
||||||
|
virtual bool vault_isCoinVaultIn(void) const =0;
|
||||||
|
|
||||||
|
virtual bool vault_isBillVaultIn(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t door_getLocks(void) const =0;
|
||||||
|
// retval bit0: upper lever is up
|
||||||
|
// bit1: upper lever is down
|
||||||
|
// bit2: lower lever is up
|
||||||
|
// bit3: lower lever is down
|
||||||
|
|
||||||
|
virtual bool door_upperDoorIsLocked(void) const =0;
|
||||||
|
|
||||||
|
virtual bool door_upperDoorIsUnlocked(void) const =0;
|
||||||
|
|
||||||
|
virtual bool door_lowerDoorIsLocked(void) const =0;
|
||||||
|
|
||||||
|
virtual bool door_lowerDoorIsUnlocked(void) const =0;
|
||||||
|
|
||||||
|
virtual bool bar_optoIn1isOn(void) const =0;
|
||||||
|
|
||||||
|
virtual bool bar_optoIn2isOn(void) const =0;
|
||||||
|
|
||||||
|
virtual bool ptu_WakeINisActive(void) const =0;
|
||||||
|
|
||||||
|
virtual bool prn_isPrinterPowerOn(void) const =0;
|
||||||
|
virtual bool prn_readyINisActive(void) const =0;
|
||||||
|
|
||||||
|
virtual bool mif_cardIsAttached(void) const =0;
|
||||||
|
virtual bool mif_isMifarePowerOn(void) const =0;
|
||||||
|
|
||||||
|
virtual bool mdb_WakeINisActive(void) const =0;
|
||||||
|
virtual bool mdb_testIsmdbTxDon(void) const =0;
|
||||||
|
virtual bool mdb_isMdbPowerOn(void) const =0;
|
||||||
|
|
||||||
|
virtual bool coid_isAttached(void) const =0;
|
||||||
|
virtual bool coin_escrowIsOpen(void) const =0;
|
||||||
|
|
||||||
|
virtual bool aux_isAuxPowerOn(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t aux_getAuxInputs(void) const =0;
|
||||||
|
|
||||||
|
virtual bool mod_isGsmPowerOn(void) const =0;
|
||||||
|
|
||||||
|
virtual bool cred_isCreditPowerOn(void) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
// Level1,2,3 RD request commands
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
// all read-requests can be sent manually by the following functions
|
||||||
|
// or automatically in background by: void hwapi::dc_autoRequest(bool on)
|
||||||
|
// in other words:
|
||||||
|
// if automatic-reading is on, then there's no need to send any of these commands,
|
||||||
|
// but it's allowed to send them in order to speed up the refreshing of the inputs
|
||||||
|
|
||||||
|
virtual void request_DC2serialConfig() const =0;
|
||||||
|
virtual void request_DC2_HWversion() const =0;
|
||||||
|
virtual void request_DC2_SWversion() const =0;
|
||||||
|
virtual void request_DC2_condition() const =0;
|
||||||
|
virtual void request_DC2_UID() const =0;
|
||||||
|
virtual void request_DC2_TimeAndDate() const =0;
|
||||||
|
virtual void request_DC2_analogues() const =0;
|
||||||
|
virtual void request_DC2_digitalInputs() const =0;
|
||||||
|
virtual void request_DC2_digitalOutputs() const =0;
|
||||||
|
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
// the folowing device state requests are deploed only if device is powered up:
|
||||||
|
virtual void request_PrinterHwState() const =0;
|
||||||
|
virtual void request_PrinterCurrentFonts() const =0;
|
||||||
|
virtual void request_PrinterStateComplete() const =0;
|
||||||
|
|
||||||
|
virtual void request_MifareReaderState() const =0;
|
||||||
|
virtual void request_MifareCardType() const =0;
|
||||||
|
virtual void request_MifareAtbType() const =0;
|
||||||
|
virtual void request_MifareData() const =0;
|
||||||
|
|
||||||
|
virtual void request_MDB_Status() const =0;
|
||||||
|
virtual void request_MDB_lastResponse() const =0;
|
||||||
|
virtual void request_EMP_allParameters() const =0;
|
||||||
|
virtual void request_EMP_lastCoin() const =0;
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
// Level 3: readback digital outputs of connected devices
|
||||||
|
// these functions are not needed for normal operation
|
||||||
|
// but can be used to test and verify conditions
|
||||||
|
|
||||||
|
// There are two options:
|
||||||
|
// 1) the important things like power-outputs and wake lines are
|
||||||
|
// measured at DC2-terminals (after transistors) and come as input to DC-board
|
||||||
|
// 2) others like Leds are read from µC-pins by DC-board
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
virtual bool test_getDO_mdbRXtst(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t lock_getDO_motors(void) const =0;
|
||||||
|
// bit0: upper lock forward bit 1 backward
|
||||||
|
// bit2: lower lock forward bit 3 backward
|
||||||
|
|
||||||
|
virtual uint8_t test_serialState(void) const =0;
|
||||||
|
// test on-board signals for the serials
|
||||||
|
// serial drv on/off, Serial mux1, Serial mux2
|
||||||
|
virtual bool test_serialIsOn(void) const =0;
|
||||||
|
virtual bool test_serialMux1isSetToPrinter(void) const =0;
|
||||||
|
virtual bool test_serialMux1isSetToModem(void) const =0;
|
||||||
|
virtual bool test_serialMux2isSetToCredit(void) const =0;
|
||||||
|
virtual bool test_serialMux2isSetToMifare(void) const =0;
|
||||||
|
|
||||||
|
virtual bool led_coinIsOn(void) const =0;
|
||||||
|
virtual bool led_frontIsOn(void) const =0;
|
||||||
|
virtual bool led_ticketIsOn(void) const =0;
|
||||||
|
virtual bool led_pinIsOn(void) const =0;
|
||||||
|
virtual bool led_StartIsOn(void) const =0;
|
||||||
|
virtual bool led_insideIsOn(void) const =0;
|
||||||
|
|
||||||
|
virtual bool fan_isOn(void) const =0;
|
||||||
|
virtual bool siren_isOn(void) const =0;
|
||||||
|
virtual bool bar_relayIsOn(void) const =0;
|
||||||
|
virtual bool ptu_WakeOutIsOn(void) const =0;
|
||||||
|
|
||||||
|
virtual bool aux_powerIsOn(void) const =0;
|
||||||
|
|
||||||
|
virtual bool coin_shutterIsOpen(void) const =0;
|
||||||
|
virtual bool coin_shutterTestOutput(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t coin_escrowFlapOpened(void) const =0;
|
||||||
|
// retval: 1:return flap is open 2:take flap is open 0:closed
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
// Level4 ( Timer processes, device supervision by DC, processes with more then one devices
|
||||||
|
// WRITE
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
|
||||||
|
virtual void sendDeviceSettings(uint8_t kindOfPrinter, uint8_t kindOfCoinChecker,
|
||||||
|
uint8_t kindOfMifareReader, uint8_t suppressSleep,
|
||||||
|
uint8_t kindOfModem, uint8_t kindOfCredit ) const =0;
|
||||||
|
|
||||||
|
virtual void request_ReadbackDeviceSettings() const =0;
|
||||||
|
|
||||||
|
virtual void readback_DeviceSettings(uint8_t *length, uint8_t *data) const =0;
|
||||||
|
// refer to DC2 manual for exact content
|
||||||
|
// state 5.5.21: byte[0]=kindOfPrinter byte[1]=kindOfCoinChecker
|
||||||
|
// byte[2]=kindOfMifarereadr byte[3]=suppress sleep mode
|
||||||
|
// byte[4]=kindOfModem byte[5]=kind of cc terminal
|
||||||
|
|
||||||
|
virtual uint8_t emp_returnLastCoin(uint16_t *value, uint8_t *signal) const =0;
|
||||||
|
// use for changer
|
||||||
|
|
||||||
|
virtual void sendMachineID(uint16_t customerNr, uint16_t machineNr,
|
||||||
|
uint16_t borough, uint16_t zone,
|
||||||
|
uint16_t alias, char *location) const =0;
|
||||||
|
|
||||||
|
virtual void request_ReadbackMachineID() const =0;
|
||||||
|
|
||||||
|
virtual void readback_machineIDdata(uint8_t *length, uint8_t *data) const =0;
|
||||||
|
// state 5.5.21: byte[0,1]=customer number byte[2,3]=machine number
|
||||||
|
// byte[4,5]=borough byte[6,7]=zone byte[8,9]=alias name
|
||||||
|
// byte[10...41]=location
|
||||||
|
|
||||||
|
|
||||||
|
// Locks stops automatically at end switch or by timeout
|
||||||
|
virtual uint8_t lock_openUpperDoor(void) const =0;
|
||||||
|
virtual uint8_t lock_closeUpperDoor(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t lock_openLowerDoor(void) const =0;
|
||||||
|
virtual uint8_t lock_closeLowerDoor(void) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
virtual void shut_openOnce(void) const =0;
|
||||||
|
// and close automatic after shutter time
|
||||||
|
|
||||||
|
virtual void shut_openForCoin(bool start) const =0;
|
||||||
|
// open flap if coin is attached
|
||||||
|
// once process is started it runs until stop command
|
||||||
|
|
||||||
|
virtual void shut_sendOpeningTime(uint16_t timeIn_ms ) const =0;
|
||||||
|
// after this time without retrigger the flap is closed
|
||||||
|
|
||||||
|
virtual void esc_takeMoney(void) const =0;
|
||||||
|
// and close automatically after escrow time (1s)
|
||||||
|
|
||||||
|
virtual void esc_returnMoney(void) const =0;
|
||||||
|
// and close automatically after escrow time (1s)
|
||||||
|
|
||||||
|
virtual void mif_creatAtbCard(uint8_t cardType) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
// read response from DC2 (input data)
|
||||||
|
// ------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* data description:
|
||||||
|
byte 0: current read state: 0=power off 1=reader-fault 2=ready
|
||||||
|
3=just reading 4=read complete
|
||||||
|
5=read partial, removed too early
|
||||||
|
6=state unknown
|
||||||
|
byte 1,2: read data length from card
|
||||||
|
3: 1=reader is OK (reported serial nr is OK) 0=wrong or no reader
|
||||||
|
4...15: reader version, expected "ATB25-1.8"
|
||||||
|
byte16: 1=card is present 0:not
|
||||||
|
17: 0
|
||||||
|
18: card type reported from reader
|
||||||
|
19: 1=allowed card type 0=not
|
||||||
|
20: card size: 1 or 4 (dec) = card size
|
||||||
|
21: LengthOfUID: 4 or 7 (dec) (byte)
|
||||||
|
22: UID 8 byte in hex
|
||||||
|
byte 30: sector logged: 0
|
||||||
|
byte 31: current sector: 0
|
||||||
|
byte 32: result, always 0
|
||||||
|
*/
|
||||||
|
virtual uint8_t mif_returnReaderStateAndCardType(uint8_t *buf, uint8_t maxBufferSize) const =0;
|
||||||
|
// retval 0=OK 1=error host buffer too small
|
||||||
|
|
||||||
|
virtual bool mif_readerIsOK(void) const =0;
|
||||||
|
|
||||||
|
virtual bool mif_cardAttached(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t mif_readResult(void) const =0;
|
||||||
|
// result: 0: unknown or still in progress
|
||||||
|
// 1: card read successful
|
||||||
|
// 2: reading error
|
||||||
|
|
||||||
|
virtual QString mif_cardUID(void) const =0;
|
||||||
|
|
||||||
|
virtual uint8_t mif_getCardDataDec(uint8_t blkNr, uint8_t *buf, uint8_t maxBufferSize) const =0;
|
||||||
|
|
||||||
|
virtual QString mif_getCardDataStr(uint8_t blockNumber) const =0;
|
||||||
|
// with blockNumber=0...11
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------------------------------------
|
||||||
|
// --------------------------------------------- PRINTER ----------------------------------------------------
|
||||||
|
// ----------------------------------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
// read printer condition and settings
|
||||||
|
|
||||||
|
virtual uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const =0;
|
||||||
|
// retval: status byte
|
||||||
|
// byte 0 = 0: prnter OK, >0: error
|
||||||
|
// bit0: paper low 1: no paper 2: temperature error
|
||||||
|
// 3: head open 4: paper jam in cutter
|
||||||
|
// 6: no response 7: bad response from printer
|
||||||
|
// and return struct "Tprn_hw_state"
|
||||||
|
|
||||||
|
virtual bool prn_isUpAndReady(void) const =0;
|
||||||
|
// true: printer is powered, serial is ok, no error, printer is connected and resonding
|
||||||
|
|
||||||
|
virtual void prn_getCurrentFontSetting(struct Tprn_currentSettings *prn_fonts) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
// send Commands to printer:
|
||||||
|
|
||||||
|
virtual void prn_sendText(QByteArray *buf) const =0;
|
||||||
|
// up to 1280 bytes
|
||||||
|
|
||||||
|
virtual void prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3) const =0;
|
||||||
|
// send three byte through to printer, see printers manual
|
||||||
|
|
||||||
|
virtual void prn_sendPrnEscCmd(uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4) const =0;
|
||||||
|
// send four byte through to printer, see printers manual
|
||||||
|
|
||||||
|
|
||||||
|
virtual void prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density, uint8_t alignment, uint8_t orientation) const =0;
|
||||||
|
// send 5 byte: byte 0,1: speed 5...250 mm/s
|
||||||
|
// byte2: density 0....(25)....50
|
||||||
|
// byte3: alignment 'l', 'c', 'r' = left, center, right
|
||||||
|
// byte4: orientation 0, 90, 180 = 0°, 90°, 180° rotation (by now not supported!)
|
||||||
|
// not batched! don't use twice within 100ms
|
||||||
|
|
||||||
|
virtual void prn_movePaper(uint8_t wayInMm, uint8_t direction) const =0;
|
||||||
|
//direction: 1=forward 2=backward
|
||||||
|
//
|
||||||
|
virtual void prn_setFonts(uint8_t font, uint8_t size, uint8_t width, uint8_t height) const =0;
|
||||||
|
// font = kind of font 5...11 (0..22)
|
||||||
|
// size = 6...20, 9..9: too tiny 10: small ...12 = normal size ...20=huge
|
||||||
|
// width: 0...4 0=1x 1=2x 2=4x (huge!) 3=8x 4=16x (3,4 make no sense)
|
||||||
|
// heigth: 0...7 = 1x...8x only 0,1,2,(3) make sense
|
||||||
|
|
||||||
|
virtual void prn_setLetters(uint8_t bold, uint8_t invers, uint8_t underlined) const =0;
|
||||||
|
// bold: 0/1
|
||||||
|
// invers: 0/1
|
||||||
|
// underlined: 0/1
|
||||||
|
|
||||||
|
virtual void prn_cut(uint8_t kindof) const =0;
|
||||||
|
// kindof: 1=full cut 2=partial cut 3=eject (5xLF + full cut)
|
||||||
|
|
||||||
|
virtual void prn_newLine(uint8_t nrOfLines) const =0;
|
||||||
|
|
||||||
|
virtual void prn_printCompleteFontTable(void) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
virtual void prn_printBarcode(uint8_t kindOf, uint8_t withText, uint8_t offset, uint8_t rotation, uint8_t dataLeng, uint8_t *data) const =0;
|
||||||
|
// kind of barcode: 0=Code39 1=Code128 2=EAN13 3= 2/5interleaved 4=UPC-A 5=EAN8
|
||||||
|
// withText: print readable text below
|
||||||
|
// offset: move by pixel from left border
|
||||||
|
// rotation
|
||||||
|
// dataLeng in byte
|
||||||
|
|
||||||
|
virtual void prn_sendQRdata(QByteArray *buf) const =0;
|
||||||
|
// maximal 150 alphanummeric bytes
|
||||||
|
|
||||||
|
virtual void prn_printQRcode(void) const =0;
|
||||||
|
// QRcode may have 1...150 alphanummeric data, must be transfered in advance
|
||||||
|
|
||||||
|
|
||||||
|
virtual void prn_printLogo(uint8_t nrOfLogo, uint8_t offset ) const =0;
|
||||||
|
// nrOfLogo: 1..4 in flash 5...8 in Ram
|
||||||
|
// offset: in mm form left border
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// .........................................................
|
||||||
|
// Parking Ticket (print-out document) designer TD
|
||||||
|
// .........................................................
|
||||||
|
|
||||||
|
// Predefine document Layout (e.g. parking ticket) in advance and stroe it for quick and easy use
|
||||||
|
// in opposite to the above "single" commands you need only one or a few commands at vending time.
|
||||||
|
// Stored text is just send to printer once the printing command is issued
|
||||||
|
// stored commands within the text are interpreted and executed right at the place (in ticket) they are
|
||||||
|
// example: start bold, <text in bold>, stop bold
|
||||||
|
// Predefinition of up to 16 ticket Layouts is possible, 0...1280 byte each
|
||||||
|
// Number 0..15, al keept non-volatile
|
||||||
|
// up to 8 dynamic values can be defined in the template ("print val3 here") and will be sent with printing command
|
||||||
|
// example: print current time at this point (the time of printing not the storage time!!)
|
||||||
|
|
||||||
|
virtual void pri_startTicketDesign(void) const =0;
|
||||||
|
// start for every new printer document, reseting collecting buffer
|
||||||
|
|
||||||
|
// all further functions write/append text, numbers and command to the ticket-buffer, up to 1278 bytes allowed
|
||||||
|
// return val of the appending functions: true=ok false=too long, buffer full
|
||||||
|
|
||||||
|
virtual int pri_TD_getCurrentSize(void) const =0;
|
||||||
|
// retval: 0...1278
|
||||||
|
|
||||||
|
virtual bool pri_TD_addText(QByteArray text) const =0;
|
||||||
|
// example: pri_TD_addText("Hello") const =0;
|
||||||
|
// example: pri_TD_addText(tempStr) const =0;
|
||||||
|
// retval: true=ok false=too long, buffer full
|
||||||
|
|
||||||
|
virtual bool pri_TD_addValue(int val) const =0;
|
||||||
|
// +/- 0...2^(31)
|
||||||
|
|
||||||
|
virtual bool pri_TD_addNewLine(void) const =0;
|
||||||
|
|
||||||
|
virtual bool pri_TD_addSign(char sign) const =0;
|
||||||
|
// example: '.' ' ' 0x20 'W' '$'
|
||||||
|
|
||||||
|
virtual bool pri_TD_addCommand(char group, char attribute, char p1, char p2, char p3, char p4, char p5) const =0;
|
||||||
|
// always add 8 byte to the ticket layout: ESC & group & attribute & parameter1...5
|
||||||
|
/* complete list of possible commands:
|
||||||
|
group 50 : paper
|
||||||
|
attribute 10 : move forward
|
||||||
|
p1: wayInMm p2: direction
|
||||||
|
attribute 11 : cut
|
||||||
|
p1: kind of, 1=full 2=partial, 3=eject
|
||||||
|
attribute 12 : new line(s)
|
||||||
|
p1: nr of lines 1...100
|
||||||
|
|
||||||
|
group 51 : fonts
|
||||||
|
attribute 10 : kind of font see description above
|
||||||
|
p1: 0...8
|
||||||
|
attribute 11 : font size
|
||||||
|
p1: 6...20
|
||||||
|
attribute 12 : font width
|
||||||
|
p1: 0...4
|
||||||
|
attribute 13 : font heigth
|
||||||
|
p1: 0...7
|
||||||
|
attribute 14 : switch bold print on/off
|
||||||
|
p1: 0=off 1=on
|
||||||
|
attribute 15 : switch invers print on/off
|
||||||
|
p1: 0=off 1=on
|
||||||
|
attribute 16 : switch underlined print on/off
|
||||||
|
p1: 0=off 1=on
|
||||||
|
|
||||||
|
group 52 : print graphics
|
||||||
|
attribute 10 : print barcode with dynamic data 6 and 7
|
||||||
|
p1...p5 = kindOf, withText, offset, rotation, dataLeng, see description above
|
||||||
|
attribute 11 : print QRcode with preset data
|
||||||
|
|
||||||
|
attribute 12 : print Logo
|
||||||
|
p1=nrOfLogo, p2=offset
|
||||||
|
|
||||||
|
group 53 : print dynamics
|
||||||
|
attribute 10 :
|
||||||
|
p1: 1...8 = print dynData 0..7 at this place
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
virtual char prn_clearDocument(uint8_t documentNumber) const =0;
|
||||||
|
// clear memory buffer for ONE document
|
||||||
|
// function takes a second! don't send right before "store doc"
|
||||||
|
|
||||||
|
virtual bool prn_store_Document(uint8_t documentNumber ) const =0;
|
||||||
|
// send the predefined Layout (generated with above TD functions) to DeviceController to save
|
||||||
|
// documentNumber=0...15
|
||||||
|
// maximal 1280 bytes each
|
||||||
|
// allowed: 0x20...0xFF, 0x0A, 0x0C, 0x1B (LF, CR, Esc)
|
||||||
|
// 0x1B=start of embedded command (next 7bytes = command)
|
||||||
|
|
||||||
|
// with a print command a set of 8 dynamic strings can be sent
|
||||||
|
// the place in the ticket layout is predefined (already in DC memory)
|
||||||
|
// the dynamics are first calculated at printing time
|
||||||
|
|
||||||
|
virtual bool prn_printDocument(uint8_t documentNumber, struct T_dynDat *dynTicketData) const =0;
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------------------------------------
|
||||||
|
// --------------------------------------------- MDB Bus ----------------------------------------------------
|
||||||
|
// ----------------------------------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
//void mdb_switchPower(bool on) const =0; defined above
|
||||||
|
//void mdb_switchWake(bool WAKEACTIVE) const =0; defined above
|
||||||
|
// bool mdb_WakeINisActive(void) const =0;
|
||||||
|
// bool mdb_testIsmdbTxDon(void) const =0;
|
||||||
|
// bool mdb_isMdbPowerOn(void) const =0;
|
||||||
|
// void request_MDB_Status() const =0;
|
||||||
|
// void request_MDB_lastResponse() const =0;
|
||||||
|
|
||||||
|
|
||||||
|
virtual void mdb_sendBusReset(void) const =0;
|
||||||
|
|
||||||
|
virtual void mdb_sendCommand(uint8_t toMdbDevice, uint8_t mdbCommand) const =0;
|
||||||
|
// send one bus command directly over mdb bus, refer to mdb manual for commands
|
||||||
|
// this command is not needed in normal operation, just for new or special things
|
||||||
|
|
||||||
|
virtual void mdb_sendMessage(uint8_t toMdbDevice, uint8_t mdbCommand, uint8_t nrOfData, uint8_t *dataBuffer) const =0;
|
||||||
|
// nrOfData = sizeOf(dataBuffer) maximal 34 byte according mdb specs
|
||||||
|
// same as mdb_sendCommand, just with data
|
||||||
|
|
||||||
|
virtual bool mdb_busIsReadyToWork() const =0;
|
||||||
|
|
||||||
|
virtual bool mdb_deviceVoltageOK() const =0;
|
||||||
|
|
||||||
|
virtual bool mdb_busVoltageOk() const =0;
|
||||||
|
|
||||||
|
virtual uint8_t mdb_getLastDeviceResponse(uint8_t *fromDevice, uint8_t *lastRequest,
|
||||||
|
uint8_t *responseLength, uint8_t *responseBuffer) const =0;
|
||||||
|
// fromDevice: device nr from which data was requested 0,1,2,3
|
||||||
|
// lastRequest: sent mdb command
|
||||||
|
// responseLength: nr of payload data (after mdb-ack) 0...34
|
||||||
|
// responseBuffer holds payload data (answer from mdb device)
|
||||||
|
// return val: mdb result of this request: 1=got ACK 2=got 3xNAK 3=no or bad response 4:got Data (after ACK)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------------------------------------
|
||||||
|
// ---------------------------------- Electronic Coin Validator EMP -----------------------------------------
|
||||||
|
// ----------------------------------------------------------------------------------------------------------
|
||||||
|
|
||||||
|
|
||||||
|
virtual void emp_sendSettings(uint16_t coinAcceptance, uint8_t tokenChannel, uint16_t *coinDenomination ) const =0;
|
||||||
|
// coinAcceptance: bit0=coin1 (lowest donomination) bit15=coin16 bitH=accept bit L = deny coin (no validation)
|
||||||
|
// tokenChannel 0...31: if this signal comes from emp then a token was inserted
|
||||||
|
// coinDenomination = array of 16 coin values (e.g. 5, 10, 20...)
|
||||||
|
|
||||||
|
virtual void emp_pollingOnOff(uint8_t on) const =0;
|
||||||
|
|
||||||
|
virtual void emp_startCoinAcceptance(void) const =0;
|
||||||
|
|
||||||
|
virtual void emp_stopCoinAcceptance(void) const =0;
|
||||||
|
|
||||||
|
virtual void emp_getAllParameters(struct T_emp *emp) const =0;
|
||||||
|
// see struct in hwapi.h
|
||||||
|
// usage example:
|
||||||
|
// hwapi *HWaccess const =0;
|
||||||
|
// HWaccess = new hwapi() const =0;
|
||||||
|
// struct T_emp myEmp const =0;
|
||||||
|
// HWaccess->emp_getAllParameters(&myEmp) const =0;
|
||||||
|
// readval=myEmp.pollingRunning const =0;
|
||||||
|
|
||||||
|
virtual uint8_t emp_chkIfCoinInserted(void) const =0;
|
||||||
|
// retval: 0...16 coins left in FIFO
|
||||||
|
|
||||||
|
virtual void emp_getNewCoinRecord(uint8_t *valid, uint8_t *signal, uint8_t *error, uint16_t *value) const =0;
|
||||||
|
// with every call ONE coin is taken out of FIFO and pointer decremented
|
||||||
|
// valid: should be 1
|
||||||
|
// signal: comes right from coin checker, 0...15 (0=first programmed coin type) 0xFF=no signal
|
||||||
|
// error: was reported from EMP as dynamic signal right after coin insertion (instead of
|
||||||
|
// coin signal), example: 3=unknown coin 4=coin is blocked by host. 0xFF=no error
|
||||||
|
// value: of the coin. Depends on parameter "coinDenomination" in function "emp_sendSettings"
|
||||||
|
// if coinDenomination[coin 0..15] = 0 then the value programmed in coin checker is taken
|
||||||
|
// if coinDenomination > 0 then this value is taken.
|
||||||
|
// Useful in case of two currencies (adapt to local currency) or for token.
|
||||||
|
|
||||||
|
// function gives more details as "emp getLastCoin()" but "emp getLastCoin()" is easier to use
|
||||||
|
|
||||||
|
// alternativ to emp_getNewCoinRecord( ):
|
||||||
|
virtual uint8_t emp_giveLastCoin(uint16_t *value, uint8_t *signal) const =0;
|
||||||
|
// retval: 0: NO coin stored 1: valid coin 2: got wrong coin or coin denied
|
||||||
|
// value: if retval1: value of the coin if reval=2: error number
|
||||||
|
// 0xFF means NO error or NO signal (as 0 is a valid error/signal)
|
||||||
|
// signal: channel nr reported from checker 0...15
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
Q_DECLARE_INTERFACE(hwinf, "eu.atb.ptu.plugin.hwinf/1.0.0")
|
||||||
|
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
Loading…
Reference in New Issue
Block a user