Fix: add source-files to project

send signal runProc_coinAttached only if state changes from false true.

DCLibraries.pri

@@ -90,7 +90,9 @@ HEADERS += \
     $${PWD}/include/sendWRcmd.h \
     $${PWD}/include/storeINdata.h \
     $${PWD}/include/tslib.h \
-    $${PWD}/include/shared_mem_buffer.h
+    $${PWD}/include/shared_mem_buffer.h \
+    $${PWD}/include/reporting_thread.h \
+    $${PWD}/include/download_thread.h
 
 SOURCES += \
     $${PWD}/src/datei.cpp \
@@ -101,7 +103,9 @@ SOURCES += \
     $${PWD}/src/sendWRcmd.cpp \
     $${PWD}/src/storeINdata.cpp \
     $${PWD}/src/tslib.cpp \
-    $${PWD}/src/shared_mem_buffer.cpp
+    $${PWD}/src/shared_mem_buffer.cpp \
+    $${PWD}/src/reporting_thread.cpp \
+    $${PWD}/src/download_thread.cpp
 
 
 # INTERFACE = DeviceController

include/datIf.h

@@ -134,8 +134,7 @@
 
 
 
-class DownloadThread;
+
-class hwinf;
 class T_datif : public QObject
 {
     Q_OBJECT    
@@ -166,14 +165,13 @@ class T_datif : public QObject
     T_prot *myDCIF;
     QTimer *datif_trigger;
     uint8_t selectedSlaveAddr;
-    hwinf *m_hw = nullptr;
 
 private slots:
     char datif_cycleSend();
     void StoredRecData();
 
 public:
-    T_datif(hwinf *hw, QObject *parent = nullptr);
+    T_datif(QObject *parent = nullptr);
 
     void resetChain(void);
     char isPortOpen(void);

include/hwapi.h

@@ -93,13 +93,14 @@ private:
     void sub_storeSendingText(QByteArray *buf) const;
     QTimer *hwapi_TimerPayment;
     QSharedMemory *m_sharedMem;
-    ReportingThread *m_reportingThread = nullptr;
+    ReportingThread *m_reportingThread;
-    DownloadThread *m_downloadThread = nullptr;
+    DownloadThread *m_downloadThread;
     //QTimer *hwapi_triggerBL;
 
 public:
     explicit hwapi(QWidget *parent = nullptr);
 
+
     #ifdef  THIS_IS_CA_MASTER
     T_datif *myDatif;
     #endif
@@ -1383,9 +1384,7 @@ signals:
     void hwapi_doorCBinAndAllDoorsClosed(void) const override;
     void hwapi_doorAllDoorsClosed(void) const override;
 
-
+    void hwapi_coinAttached() const override;
-
-
 
  private slots:
     //void hwapi_slotPrintFinished_OK(void);
@@ -1413,8 +1412,7 @@ signals:
     void sub_slotCoin15(void);
     void sub_slotCoin16(void);
 
-
+    void coinAttached();
-
 
 };
 

include/interfaces.h

@@ -2390,6 +2390,7 @@ signals:
     virtual void hwapi_doorCBinAndAllDoorsClosed(void) const=0;
     virtual void hwapi_doorAllDoorsClosed(void) const=0;
 
+    virtual void hwapi_coinAttached() const = 0;
 
     // NOTE: declaring a "pure virtual" "signal" should be an error and thus not valid.
     /* GH Version, bringt Fehler

include/reporting_thread.h

@@ -3,7 +3,6 @@
 
 #include <QThread>
 #include <QString>
-// #include <functional>
 
 class hwapi;
 class ReportingThread : public QThread {
@@ -13,14 +12,6 @@ public:
     ReportingThread(hwapi *hw);
     ~ReportingThread();
 
-    //void setFunction(std::function<void(QString const&)> f) {
-    //    m_f = f;
-    //}
-
-    //std::function<void(QString const&)> function() {
-    //    return m_f;
-    //}
-
 protected:
     // reporting thread does not have a running event queue, and therefore
     // no slots. signals work the usual way.
@@ -29,7 +20,6 @@ protected:
 private:
     hwapi *m_hw;
     QString m_fileToDownload;
-    //std::function<void(QString const&)> m_f;
 };
 
 #endif // REPORTING_THREAD_H_INCLUDED

include/runProc.h

@@ -15,6 +15,7 @@
 #include <QDebug>
 #include "datIf.h"
 #include <QSharedMemory>
+#include <atomic>
 #include "sendWRcmd.h"
 #include "controlBus.h"
 #include "storeINdata.h"
@@ -35,6 +36,10 @@ class T_runProc : public QObject
 
     void restoreDeviceParameter(struct T_devices *deviceSettings);
 
+#ifndef THIS_IS_CA_MASTER
+    std::atomic_bool m_coinAttached{false};
+#endif
+
 private slots:
     void runProc_slotProcess(void);
     bool bl_performComplStart(void);
@@ -80,6 +85,7 @@ signals:
     void runProc_doorCBinAndAllDoorsClosed(void);
     void runProc_doorAllDoorsClosed(void);
 
+    void runProc_coinAttached();
 };
 
 

lib_ca_master/lib_ca_master.pro

@@ -5,14 +5,12 @@ VERSION="1.0.1"
 HEADERS += \
     ../include/com.h \
     ../include/datIf.h \
-    ../include/prot.h \
+    ../include/prot.h
-    ../include/download_thread.h
 
 SOURCES += \
     ../src/com.cpp \
     ../src/datIf.cpp \
-    ../src/prot.cpp \
+    ../src/prot.cpp
-    ../src/download_thread.cpp
 
 include(../DCLibraries.pri)
 

lib_ca_slave/lib_ca_slave.pro

@@ -2,12 +2,6 @@ TEMPLATE = lib
 TARGET = CAslave
 VERSION="1.0.1"
 
-HEADERS += \
-    ../include/reporting_thread.h
-
-SOURCES += \
-    ../src/reporting_thread.cpp
-
 include(../DCLibraries.pri)
 
 win32 {

src/hwapi.cpp

@@ -128,8 +128,7 @@ hwapi::hwapi(QWidget *parent) : QObject(parent)
     connect(runProcess, SIGNAL(runProc_doorCoinBoxInserted()),          this, SLOT(sub_slotCoin14())); // hwapi_doorCoinBoxInserted()));
     connect(runProcess, SIGNAL(runProc_doorCBinAndAllDoorsClosed()),    this, SLOT(sub_slotCoin15())); // hwapi_doorCBinAndAllDoorsClosed()));
     connect(runProcess, SIGNAL(runProc_doorAllDoorsClosed()),           this, SLOT(sub_slotCoin16())); // hwapi_doorAllDoorsClosed()));
-
+    connect(runProcess, SIGNAL(runProc_coinAttached()),                 this, SLOT(coinAttached()));
-
 }
 
 void hwapi::hwapi_slotPayProc(void)
@@ -227,6 +226,9 @@ void hwapi::sub_slotCoin16(void)
     emit hwapi_doorAllDoorsClosed();
 }
 
+void hwapi::coinAttached() {
+    emit hwapi_coinAttached();
+}
 
 
 /*
@@ -3332,22 +3334,15 @@ void hwapi::sys_restoreDeviceParameter(struct T_devices *deviceSettings) const
     // attention: only applies if function "sys_sendDeviceParameter()" was used to send this settings before
     //          cannot be used to see settings programmed by JsonFile
     uint8_t buf[64];
-    uint8_t LL, nn;
+    uint8_t LL;
     tslib_strclr(buf,0,64);
-    uint8_t *start;
 
     //runProcess->epi_restore64BdevParameter(&LL, buf); // wozu die???
     epi_restoreRbDeviceSettings(&LL, buf);      // viel besser, stimmt immer
 
-    // Puffer in struct eintragen:
+    Q_STATIC_ASSERT(sizeof(*deviceSettings) <= sizeof(buf));
-    start = &deviceSettings->kindOfPrinter;
-    nn=0;
-    do
-    {
-        *start = buf[nn];
-        start++;
-    } while(++nn<LL);
 
+    memcpy(deviceSettings, buf, sizeof(*deviceSettings));
 }
 
 bool hwapi::sys_areDCdataValid(void) const

src/reporting_thread.cpp

@@ -4,15 +4,10 @@
 
 #include <QDateTime>
 #include <QDebug>
-#include <QApplication>
-#include <QCoreApplication>
-
-#include <cmath>
 
 ReportingThread::ReportingThread(hwapi *hw)
   : m_hw(hw)
   , m_fileToDownload(m_hw->dcDownloadFileName()) {
-  // , m_f([](QString const&){}) {
 }
 
 ReportingThread::~ReportingThread() {
@@ -22,9 +17,7 @@ ReportingThread::~ReportingThread() {
 // each component which has connects for the corresponding signals.
 void ReportingThread::run() {
 
-    qCritical()
+    qCritical() << QDateTime::currentDateTime() << "START DOWNLOAD THREAD";
-        << QDateTime::currentDateTime() << "START REPORT THREAD"
-        << "(PART OF APPLICATION" << QCoreApplication::applicationName() << ")";
 
     static QString report("");
 
@@ -103,37 +96,28 @@ void ReportingThread::run() {
     qCritical() << QDateTime::currentDateTime() << "TOTAL BLOCKS" << totalBlocks;
 
     if (totalBlocks) {
-        QDateTime const start = QDateTime::currentDateTime();
+        qint64 const start = QDateTime::currentMSecsSinceEpoch();
+        double durationMillis = 0;
         uint16_t currentBlockNumber = 0;
-        uint16_t prevBlockNumber = ~0;
 
         while (m_hw->dcDownloadGetRunning()) {
             currentBlockNumber = m_hw->dcDownloadGetCurrentBlockNumber();
-            if (prevBlockNumber != currentBlockNumber) {
-                double durationSecs = start.secsTo(QDateTime::currentDateTime());
 
-                double const timeAveragePerBlock = (currentBlockNumber > 0) ? (durationSecs / currentBlockNumber) : durationSecs;
+            durationMillis += QDateTime::currentMSecsSinceEpoch() - start;
-                long estimatedSecondsLeft = lround((timeAveragePerBlock * (totalBlocks - currentBlockNumber)));
+
-                long estimatedMinutesLeft =
+            double const timeAveragePerBlock = (currentBlockNumber > 0) ? (durationMillis / currentBlockNumber) : durationMillis;
-                    ((estimatedSecondsLeft % 60) == 0) ?
+            double const estimatedSecondsLeft = (timeAveragePerBlock * (totalBlocks - currentBlockNumber)) / 1000.0;
-                        (estimatedSecondsLeft / 60) :
-                            ((estimatedSecondsLeft + 60) / 60);
-                estimatedSecondsLeft = (estimatedSecondsLeft % 60);
 
             double percent = ((double)currentBlockNumber / (double)totalBlocks) * 100.0;
-                report = QString(": total blocks %1, current block %2 [%3] (est. time left: %4min %5s)")
+            report = QString(": total blocks %1, current block %2 [%3] (est. time left: %4s)")
                         .arg(totalBlocks)
                         .arg(currentBlockNumber)
                         .arg(percent, 0, 'f', 2)
-                            .arg(estimatedMinutesLeft)
+                        .arg(estimatedSecondsLeft, 0, 'f', 2);
-                            .arg(estimatedSecondsLeft, 2);
 
-                qCritical() << m_hw << "RT report" << report;
+            qCritical() << "RT report" << report;
 
             emit m_hw->hwapi_reportDCDownloadStatus(report);
-
-                prevBlockNumber = currentBlockNumber;
-            }
             QThread::msleep(100);
         }
 

src/runProc.cpp

@@ -48,6 +48,16 @@ T_runProc::T_runProc()
 void T_runProc::runProc_slotProcess(void)
 {
 #ifndef THIS_IS_CA_MASTER
+    bool const coinAttached = epi_getDI_CoinAttach();
+    // exchange: (atomically) replaces the underlying value of m_coinAttached
+    // with the value of coinAttached, returns the value of m_coinAttached
+    // before the call
+    if (m_coinAttached.exchange(coinAttached) == false) {
+        if (coinAttached) {
+            // old value was false, and new value is true
+            emit runProc_coinAttached();
+        }
+    }
     cash_paymentProcessing();
     doors_supervise();
     bl_performComplStart();     // neu 1.12.23