Merge branch 'proposal_detect_obsolete_data'

Move coinAttached from error-state to normal debug output.

DCLibraries.pri

@@ -1,6 +1,6 @@
 CONFIG += plugin
 QT -= gui
-QT += widgets serialport
+QT += serialport
 
 
 win32 {

dCArun/CArun.cpp

@@ -1,24 +1,26 @@
 #include "CArun.h"
-
 #include "datei.h"
 
-
-#define         UPDATE_PERIOD_MS        100
-    // period to call chain steps
-
-#define         VENDINGTIMEOUT_MS       30000
-
+#include "CCWakelineAbstraction.h"
 
 
 CArun::CArun(QObject *parent)
-    : QObject{parent}
+    : QObject(parent)
+    , setupStep(SETUP_STEP::INIT)
 {
+    this->timerChainCtrl = new QTimer(this);
+    this->connect(timerChainCtrl, SIGNAL(timeout()), this, SLOT(chainControl()));
+    this->timerChainCtrl->setSingleShot(true);
+    this->timerChainCtrl->setInterval(100);
+
     loadPlugIn(1);
 
-    timerChainCtrl = new QTimer(this);
-    connect(timerChainCtrl, SIGNAL(timeout()), this, SLOT(chainControl()));
-    timerChainCtrl->setSingleShot(0);
-    timerChainCtrl->start(UPDATE_PERIOD_MS);     // 1000: call every 1000ms
+    // Start setup-steps:
+    qCritical() << "CArun: start setup...";
+
+    this->timerChainCtrl->start();
+
+    this->ccWakelineAbstraction = new CCWakelineAbstraction(this->HWaccess, this);
 }
 
 
@@ -37,13 +39,13 @@ char CArun::loadPlugIn(char lade1_entlade2)
 
     if (!pluginLoader->load())
     {
-        qDebug()<<"cannot load plugin";
+        qCritical() << "CArun: cannot load plugin";
     } else
-        qDebug() <<"loaded plugin: " << pluginLoader->fileName();
+        qCritical() << "CArun: plugin loaded: " << pluginLoader->fileName();
 
     if (!pluginLoader->isLoaded())
     {
-        qDebug()<<pluginLoader->errorString();
+        qCritical() << "CArun: ERROR loading plugin: " << pluginLoader->errorString();;
         return 0;
     }
 
@@ -52,148 +54,121 @@ char CArun::loadPlugIn(char lade1_entlade2)
     {
         // make instance of the root component (which can hold more then one clases)
         // also loads the lib if not yet done
-        qDebug()<<"cannot start instance";
+        qCritical() << "CArun: ERROR cannot start instance";
         return 0;
     }
 
-    HWaccess= qobject_cast<hwinf *>(plugin);
+    this->HWaccess = qobject_cast<hwinf *>(plugin);
     // make instance to class "hwinf" in dll_HWapi.h over "interfaces.h"
 
-    qDebug()<<"loadPlugIn, HWAccess: " << HWaccess;
     return 0;
 }
 
+void CArun::openSerialPort()
+{
+    #define FILENAME_COMPORT            "../comport.csv"  // TODO: use absolute path
+                                                          // use settings (ini-file)
+            // comport.csv wird mit installiert in: /opt/app/
+            // k.A., ob "../comport.csv" gefunden wird.
 
+    qCritical() << "CArun: open serial port...";
+
+    QString  bs, cn;
+    int br, ci;
+
+    // load and use last settings:  --------------------
+    QByteArray myBA;
+    myBA=datei_readFromFile(FILENAME_COMPORT);
+    if (myBA.length()>0)
+    {
+        bs=csv_getEntryAsString(myBA,0);      // read the 's'     war 2!??
+        br=csv_getEntryAsInt(myBA,1);               // z.B. 5 (5.Eintrag in der Baud-Liste)
+        bs=csv_getEntryAsString(myBA,2);                // z.B 115200
+        cn=csv_getEntryAsString(myBA,3);       // z.B. COM9
+        ci=csv_getEntryAsInt(myBA,4);               // Eintragsnummer in COM-Fenster
+        this->HWaccess->dc_openSerial(br,bs,cn,1);
+    } else
+    {
+        // vermutlich wird dies hier ausgeführt?
+
+        // open with default settings
+        qCritical() << "CArun: open serial with default values";
+
+        bs="115200";
+        br=5;
+        //cn="COM14";     // Windows
+        cn="ttymxc2";   // PTU5
+        ci=2;
+        HWaccess->dc_openSerial(br,bs,cn,1);
+    }
+}
 
 void CArun::chainControl(void)
 {
-        #define FILENAME_COMPORT            "../comport.csv"  // TODO: use absolute path
-                                                              // use settings (ini-file)
-
-        QString  bs, cn;
-        int br, ci;
-
-
-        // load and use last settings:  --------------------
-        QByteArray myBA;
-        myBA=datei_readFromFile(FILENAME_COMPORT);
-        if (myBA.length()>0)
-        {
-            bs=csv_getEntryAsString(myBA,0);      // read the 's'     war 2!??
-            br=csv_getEntryAsInt(myBA,1);               // z.B. 5 (5.Eintrag in der Baud-Liste)
-            bs=csv_getEntryAsString(myBA,2);                // z.B 115200
-            cn=csv_getEntryAsString(myBA,3);       // z.B. COM9
-            ci=csv_getEntryAsInt(myBA,4);               // Eintragsnummer in COM-Fenster
-            HWaccess->dc_openSerial(br,bs,cn,1);
-        } else
-        {
-            // vermutlich wird dies hier ausgeführt, weil eine csv-Datei wird nicht installiert
-
-            // open with default settings
-            qDebug()<<"CArunGui: open serial with default values";
-
-            bs="115200";
-            br=5;
-            //cn="COM14";     // Windows
-            cn="ttymxc2";   // PTU5
-            ci=2;
-            HWaccess->dc_openSerial(br,bs,cn,1);
+    switch (this->setupStep) {
+    case SETUP_STEP::INIT:
+        qCritical() << "CArun: SETUP_STEP::INIT";
+        this->setupStep = SETUP_STEP::OPEN_SERIAL_PORT;
+        this->timerChainCtrl->start();
+        break;
+    case SETUP_STEP::OPEN_SERIAL_PORT:
+        qCritical() << "CArun: SETUP_STEP::OPEN_SERIAL_PORT";
+        this->openSerialPort();
+        this->setupStep = SETUP_STEP::TEST_OPEN_PORT;
+        this->timerChainCtrl->start();
+        break;
+    case SETUP_STEP::TEST_OPEN_PORT:
+        qCritical() << "CArun: SETUP_STEP::TEST_OPEN_PORT";
+        if (this->HWaccess->dc_isPortOpen()) {
+            this->setupStep = SETUP_STEP::TEST_RESPONSE_REQUEST;
         }
-
-        // TIMER myTO: hat keinen timeout-slot!
-        // wird nur verwendet, um isActive() abzufragen, d.h. ~x zu warten
-
-        // pruefen, of Port nach x s open:
-                if (HWaccess->dc_isPortOpen())
-                {
-
-                } else
-                {
-                  // wenn nicht: step 6
-                }
-                myTO->start(100);
-            }
-        } else
-
-        if (myStep==2)
-        {
-            if (!myTO->isActive())
-            {
-                HWaccess->dc_requTestResponse();
-                myStep++;
-                myTO->start(100);
-            }
-        } else
-
-        if (myStep==3)
-        {
-            if (!myTO->isActive())
-            {
-                if (HWaccess->dc_readAnswTestResponse())
-                    myStep++;   // response was correct
-                else
-                {
-                    myStep=6;   // 13.12.23: start Autoconnect cycle
-                    qDebug()<<"CArunGui: got no answer from DC, retry..";
-                }
-                myTO->start(100);
-            }
-
-        } else
-
-        if (myStep==4)
-        {
-            HWaccess->dc_autoRequest(1);
-            AutSendButton->setChecked(true);        // taste "druecken"
-            myStep++;
-            myTO->start(2000);
-        } else
-
-        if (myStep==5)
-        {
-            if (!myTO->isActive())
-            {
-                if (HWaccess->sys_areDCdataValid())
-                {
-                    qDebug()<<"CArunGui: DC is connected";
-                    myStep=7;  // OK, connection is up and running
-                }  else
-                {
-                    qDebug()<<"CArunGui: auto request is not running, retry...";
-                    myStep++;
-                    myTO->start(100);
-                }
-            }
-
-        } else
-
-        if (myStep==6)
-        {
-            // restart autoconnect cycle
-            myTO->start(100);     // restart
-            myStep=0;
-        } else
-
-        if (myStep==7)
-        {
-            // stay here, DC connection is up and running
-
-
-        } else
-        {
-
+        else {
+            qCritical() << "CArun: port is still closed, restarting..";
+            this->setupStep = SETUP_STEP::INIT;
         }
-
-        if (myNextStep)
-        {
-            *nextScreen=myNextStep;
-            myNextStep=0;
+        this->timerChainCtrl->start();
+        break;
+    case SETUP_STEP::TEST_RESPONSE_REQUEST:
+        qCritical() << "CArun: SETUP_STEP::TEST_RESPONSE_REQUEST";
+        this->HWaccess->dc_requTestResponse();
+        this->setupStep = SETUP_STEP::TEST_RESPONSE_CHECK;
+        this->timerChainCtrl->start();
+        break;
+    case SETUP_STEP::TEST_RESPONSE_CHECK:
+        qCritical() << "CArun: SETUP_STEP::TEST_RESPONSE_CHECK";
+        if (this->HWaccess->dc_readAnswTestResponse()) {
+            // response was correct
+            this->setupStep = SETUP_STEP::SETUP_AUTOREQEUST;
         }
-        return false;
-
-
-
+        else {
+            qCritical() << "CArun: got no answer from DC, retry..";
+            this->setupStep = SETUP_STEP::INIT;
+        }
+        this->timerChainCtrl->start();
+        break;
+    case SETUP_STEP::SETUP_AUTOREQEUST:
+        qCritical() << "CArun: SETUP_STEP::SETUP_AUTOREQEUST";
 
+        this->HWaccess->dc_autoRequest(1);
+        this->setupStep = SETUP_STEP::CHECK_VALID_DATA;
+        this->timerChainCtrl->start(2000);
+        break;
+    case SETUP_STEP::CHECK_VALID_DATA:
+        qCritical() << "CArun: SETUP_STEP::CHECK_VALID_DATA";
+        if (this->HWaccess->sys_areDCdataValid()) {
+            qCritical() << "CArun: DC is connected";
+            // do not start timer again
+        }
+        else {
+            qCritical() << "CArun: auto request is not running, retry...";
+            this->setupStep = SETUP_STEP::INIT;
+            this->timerChainCtrl->start();
+        }
+        break;
+    default:
+        qCritical() << "CArun: invalid setup step";
+        break;
+    }
 }
 
 

dCArun/CArun.h

@@ -9,10 +9,21 @@
 #include <QPluginLoader>
 #include <QDir>
 #include "plugin.h"
-#include "stepList.h"
-//#include "stepList.h" // define all working chain steps here
 
 
+enum class SETUP_STEP {
+    INIT,
+    OPEN_SERIAL_PORT,
+    TEST_OPEN_PORT,
+    TEST_RESPONSE_REQUEST,
+    TEST_RESPONSE_CHECK,
+    SETUP_AUTOREQEUST,
+    CHECK_VALID_DATA
+};
+
+
+class CCWakelineAbstraction;
+
 class CArun : public QObject
 {
     Q_OBJECT
@@ -20,8 +31,7 @@ class CArun : public QObject
 public:
     explicit CArun(QObject *parent = nullptr);
 
-    QTimer      *timerChainCtrl;
-    QTimer      *timerVendingTimeout;
+    QTimer  *timerChainCtrl;
 
     char loadPlugIn(char lade1_entlade2);
 
@@ -31,11 +41,17 @@ private:
 
     hwinf *HWaccess=nullptr;        // global pointer to plugin-class
 
+    SETUP_STEP setupStep;
 
+    void openSerialPort();
+
+    CCWakelineAbstraction* ccWakelineAbstraction;
 
 signals:
+
+
+private slots:
     void chainControl();
-    void vendingTimeout();
 
 };
 

dCArun/CCWakelineAbstraction.cpp

@@ -0,0 +1,51 @@
+#include <QFileSystemWatcher>
+#include <QFile>
+
+#include <QDebug>
+
+#include "CCWakelineAbstraction.h"
+#include "plugin.h"
+
+/**
+ * this is based on a solution from:
+ * https://embeddeduse.com/2018/09/18/monitoring-sys-files-qfilesystemwatcher/
+ *
+ */
+
+CCWakelineAbstraction::CCWakelineAbstraction(hwinf *dc, QObject *parent)
+    : QObject(parent)
+    , dc(dc)
+{
+    auto ccWakeMonitor = new QFileSystemWatcher(this);
+
+    ccWakeMonitor->addPath("/sys/class/leds/wakeupctrl_cc/brightness");
+    connect(ccWakeMonitor, &QFileSystemWatcher::fileChanged,
+                this, &CCWakelineAbstraction::ccWakeChanged);
+
+    qCritical() << "... init CCWakelineAbstraction";
+}
+
+
+void CCWakelineAbstraction::ccWakeChanged(const QString &path)
+{
+    QFile ccWakeFile(path);
+     if (!ccWakeFile.open(QIODevice::ReadOnly)) {
+         qWarning() << "ERROR: Could not open ccWakeFile file.";
+         return;
+     }
+     auto ccWake = ccWakeFile.readAll();
+     if (!ccWake.isEmpty()) {
+         int state = ccWake.at(0);
+         //qCritical() << "INFO: ccWake = " << state;
+         switch (state) {
+         case 0x30:  // '1'
+             qCritical() << "INFO: ccWake -> sleep";
+             this->dc->credit_switchWake(true); // switch 'sleep'
+             break;
+         case 0x31:  // '0'
+             qCritical() << "INFO: ccWake -> wake";
+             this->dc->credit_switchWake(false); // switch 'wake'
+             break;
+         }
+     }
+}

dCArun/CCWakelineAbstraction.h

@@ -0,0 +1,25 @@
+#ifndef CCWAKELINEABSTRACTION_H
+#define CCWAKELINEABSTRACTION_H
+
+
+#include <QObject>
+
+class hwinf;
+class QFileSystemWatcher;
+
+
+class CCWakelineAbstraction : public QObject
+{
+    Q_OBJECT
+
+public:
+    CCWakelineAbstraction(hwinf *dc, QObject *parent = nullptr);
+
+private:
+    hwinf *dc;
+    QFileSystemWatcher *ccWakeMonitor;
+
+    void ccWakeChanged(const QString &path);
+};
+
+#endif // CCWAKELINEABSTRACTION_H

dCArun/dCArun.pro

@@ -1,5 +1,5 @@
-QT       += core gui
-QT      +=widgets serialport
+QT       += core
+QT      += serialport
 QT      +=network
     # for TCP-IP
 
@@ -11,8 +11,6 @@ VERSION = "1.0.0"
 DESTDIR=$${_PRO_FILE_PWD_}/../build
 
 
-greaterThan(QT_MAJOR_VERSION, 4): QT += widgets
-
 CONFIG += c++11
 CONFIG += PTU5
 
@@ -42,19 +40,16 @@ DEFINES+=APP_EXTENDED_VERSION=\\\"$$EXTENDED_VERSION\\\"
 
 SOURCES += \
     CArun.cpp \
+    CCWakelineAbstraction.cpp \
     main.cpp \
-    mainwindow.cpp \
     tslib.cpp \
-    win01_com.cpp \
     datei.cpp
 
 HEADERS += \
     CArun.h \
+    CCWakelineAbstraction.h \
     guidefs.h \
-    mainwindow.h \
-    stepList.h \
     tslib.h \
     versionHistory.txt \
-    win01_com.h \
     datei.h \
     plugin.h

dCArun/mainwindow.cpp

@@ -1,439 +0,0 @@
-#include "mainwindow.h"
-
-char MainWindow::loadPlugIn(char lade1_entlade2)
-{
-    plugInDir.cd("plugins");
-    QPluginLoader *pluginLoader = new QPluginLoader();
-
-// select system:
-    //pluginLoader->setFileName("../MasterPlug/libCAmaster.so");   // for suse
-    //pluginLoader->setFileName("../SlavePlug/libCAslave.so");  // for ptu5
-    //pluginLoader->setFileName("../../MasterPlug/CAmaster.dll"); // for windows
-    //pluginLoader->setFileName("CAmaster.dll"); // for windows
-    pluginLoader->setFileName("/usr/lib/libCAmaster.so"); // for ptu5
-
-    if (lade1_entlade2==2)
-    {
-        pluginLoader->unload();
-        return 0;
-    }
-
-    if (!pluginLoader->load())
-    {
-        qDebug()<<"cannot load plugin";
-    } else
-        qDebug() <<"loaded plugin: " << pluginLoader->fileName();
-
-    if (!pluginLoader->isLoaded())
-    {
-        qDebug()<<pluginLoader->errorString();
-        return 0;
-    }
-
-    QObject *plugin = pluginLoader->instance();
-    if ( plugin == nullptr)
-    {
-        // make instance of the root component (which can hold more then one clases)
-        // also loads the lib if not yet done
-        qDebug()<<"cannot start instance";
-        return 0;
-    }
-
-    //int rr=hwapi->giveVal(2);                 funktioniert :))
-    //qDebug()<<"got value from plugin"<<rr;    funktioniert :))
-    // aber besser globaler pointer:
-    // im h-file
-    // hwinf *hwapi=nullptr;     // pointer to plugin-class
-
-    HWaccess= qobject_cast<hwinf *>(plugin);
-    // make instance to class "hwinf" in dll_HWapi.h over "interfaces.h"
-
-    qDebug()<<"loadPlugIn, HWAccess: " << HWaccess;
-    return 0;
-
-}
-
-
-
-
-#define         WINCTRMIN      0
-    // 0 is always the home screen
-
-#define         WINCTRMAX      30
-    // number of needed application screens, up to 255
-    // All screens must be defined below in mainwindow-class first before increasing the nr
-    // numbers must be consecutively from 0 always, 0 is the home screen always
-
-#define        FORMWIDTH        725
-//#define        FORMWIDTH        690
-    // this width is the same for ALL windows
-
-#define        FORMHEIGHT       440
-// this height is the same for ALL windows
-
-#define         NAVIBUTTONHEIGHT        70
-#define         NAVIBUTTONWIDHT        50
-
-#define         HOMEPAGE_BACKGROUND_COLOR   "background-color: lightgrey"
-
-#define         BUTTON_COLOR                "background-color: rgb(160,250,190)"
-
-#define         ACTIVE_NAVI_COLOR                "background-color: rgb(160,250,190)"
-#define         DISABL_NAVI_COLOR                "background-color: grey"
-
-#define         APPPAGE_BACKGROUND_COLOR   "background-color: lightgrey"
-
-#define         UPDATE_PERIOD_MS        100
-    // period to call chain steps
-
-#define         VENDINGTIMEOUT_MS       30000
-    // after this time without any operation the program returns to idle state
-    // time in ms, that means 30.000 gives 30seconds
-
-MainWindow::MainWindow(QWidget *parent) : QMainWindow(parent)
-{
-    loadPlugIn(1);
-
-    // define all working moduls (besides gui) here, call ini and working in chainControl() (~Line 1000)
-    //mifCard = new T_Mifare(HWaccess);   // ganz wichtig: HWaccess an sub-Konstruktor übergeben
-                                        // sonst crash bei HW-Zugriff!!!!
-    //diary = new T_lib_diary(); absturz!!!!!!
-    //conf = new T_lib_config(HWaccess);
-
-    timerChainCtrl = new QTimer(this);
-    connect(timerChainCtrl, SIGNAL(timeout()), this, SLOT(chainControl()));
-    timerChainCtrl->setSingleShot(0);
-    timerChainCtrl->start(UPDATE_PERIOD_MS);     // 1000: call every 1000ms
-
-    timerVendingTimeout = new QTimer(this);
-    connect(timerVendingTimeout, SIGNAL(timeout()), this, SLOT(vendingTimeout()));
-    timerVendingTimeout->setSingleShot(true);
-    timerVendingTimeout->start(VENDINGTIMEOUT_MS);     // in ms
-
-    // ##########################################################################################
-    // für jedes anzuzeigende Fenster eine eigene Groupbox mit eigenem Grid anlegen:
-
-    frame01 = new QGroupBox;
-    frame01->setStyleSheet(APPPAGE_BACKGROUND_COLOR);
-    frame01->setMinimumSize(FORMWIDTH,FORMHEIGHT);
-    QVBoxLayout *smallLay01 = new QVBoxLayout;
-    frame01->setLayout(smallLay01);
-    // Fensterinhalt aus externer Klasse einfügen:
-    myFenster01 = new T_winComPort(HWaccess);        // HWaccess damit auf das HW-Plugin zugegriffen werden kann, sonst crash
-    smallLay01->addWidget(myFenster01);
-
-    // ##########################################################################################
-    // draw Mainwindow:
-    bigGroupbox = new QGroupBox;
-    bigGroupbox->setStyleSheet("background-color: grey");
-    bigGroupbox->setMinimumSize(800,480);
-//    bigLayout = new QVBoxLayout;      // navi buttons on bottom side
-    bigLayout = new QHBoxLayout;        // navi buttons right hand
-
-    // ##########################################################################################
-    // add all windows (but display only one)
-    // display only one: then all windows are shown at the same place
-    // display more then one: the windows are listed in vertical order
-
-    bigLayout->addWidget(frame01);
-
-    bigGroupbox->setLayout(bigLayout);
-    switchScreen(1);
-    //HideAllWindows();
-
-    // ##########################################################################################
-    // Steuer Leiste
-
-    //QHBoxLayout *ButtonLayout = new QHBoxLayout();
-    QVBoxLayout *ButtonLayout = new QVBoxLayout();
-    QFont myTabFont;
-    myTabFont.setPixelSize(26);
-
-    pBback = new QPushButton("<");        //b\na\nc\nk");
-    pBback->setFont(myTabFont);
-    pBback->setStyleSheet(ACTIVE_NAVI_COLOR);    
-    pBback->setMinimumHeight(NAVIBUTTONHEIGHT);
-    pBback->setMaximumWidth(NAVIBUTTONWIDHT);
-    connect(pBback, SIGNAL( clicked() ), myFenster01, SLOT( Nav_back()));
-
-    myTabFont.setPixelSize(22);
-    pBhome = new QPushButton("<<");      //h\no\nm\ne");
-    pBhome->setFont(myTabFont);
-    pBhome->setStyleSheet(ACTIVE_NAVI_COLOR);
-    pBhome->setMinimumHeight(NAVIBUTTONHEIGHT);
-    pBhome->setMaximumWidth(NAVIBUTTONWIDHT);
-    connect(pBhome, SIGNAL( clicked() ), myFenster01, SLOT( Nav_home()));
-
-    myTabFont.setPixelSize(26);
-    pBforward = new QPushButton(">"); //n\ne\nx\nt");
-    pBforward->setFont(myTabFont);
-    pBforward->setStyleSheet(ACTIVE_NAVI_COLOR);
-    pBforward->setMinimumHeight(NAVIBUTTONHEIGHT);
-    pBforward->setMaximumWidth(NAVIBUTTONWIDHT);
-    connect(pBforward, SIGNAL( clicked() ), myFenster01, SLOT( Nav_next()));
-
-    QLabel *buttonSpace = new QLabel(" ");
-    ButtonLayout->addWidget(pBback);
-    ButtonLayout->addWidget(buttonSpace);
-    //ButtonLayout->addWidget(buttonSpace);
-    ButtonLayout->addWidget(pBhome);
-    ButtonLayout->addWidget(buttonSpace);
-    //ButtonLayout->addWidget(buttonSpace);
-    ButtonLayout->addWidget(pBforward);
-    QLabel *bottomSpace = new QLabel(" ");
-    ButtonLayout->addWidget(bottomSpace);
-
-    bigLayout->addLayout(ButtonLayout);
-
-    setCentralWidget(bigGroupbox);
-
-    // AUTOSTART serial transmission
-    //HWaccess->dc_openSerial(5,"115200","ttyS0",1);    // my suse computer
-    //HWaccess->dc_openSerial(1,"9600","COM5",1);    // my suse computer
-    //HWaccess->dc_openSerial(5,"115200","ttymxc2",1);      // ptu5
-    //HWaccess->dc_autoRequest(true);
-    //myFenster01->setButtons4autoStart();
-    //HWaccess->alarm_switchSiren(0);  // test
-
-    enableNaviButtons(BACKBUTTON,true);
-    enableNaviButtons(HOMEBUTTON,true);
-    enableNaviButtons(FORWBUTTON,true); 
-    this->chainIni();
-
-    //connect(myFenster02, SIGNAL(quitMyApp()), this, SLOT(close()));
-
-}
-
-MainWindow::~MainWindow()
-{
-    loadPlugIn(2);
-}
-
-
-void MainWindow::HideAllWindows()
-{
-    // vorsicht: Fenster muss oben definiert sein sonst Programmabsturz ohne Kommentar
-
-    frame01->setEnabled(false);
-    frame01->setVisible(false);
-}
-
-
-// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-//  Call Windows
-// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-void MainWindow::switchScreen(uint16_t winNr)    // 0...30
-{
-
-    HideAllWindows();
-    //qDebug()<<"switch screen to " << winNr;
-
-    switch (winNr)
-    {
-    case 1:
-        frame01->setEnabled(true);
-        frame01->setVisible(true);
-        break;
-    default:
-        break;
-
-    }
-
-}
-
-// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-// Navigation buttons
-// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-void MainWindow::enableNaviButtons(uint8_t switchBitwise)
-{
-    // switchBitwise=0: no change
-    // bit0,1: enable/disable button "next"
-    // bit2,3: enable/disable button "home"
-    // bit4,5: enable/disable button "back"
-
-    if (switchBitwise &1)
-    {
-        pBforward->setStyleSheet(ACTIVE_NAVI_COLOR);
-        //pBforward->setText("next");
-        pBforward->setEnabled(true);
-    } else
-    if (switchBitwise &2)
-    {
-        pBforward->setStyleSheet(DISABL_NAVI_COLOR);
-        //pBforward->setText("    ");
-        pBforward->setEnabled(false);
-    }
-
-    if (switchBitwise &4)
-    {
-        pBhome->setStyleSheet(ACTIVE_NAVI_COLOR);
-        //pBhome->setText("home");
-        pBhome->setEnabled(true);
-    } else
-    if (switchBitwise &8)
-    {
-        pBhome->setStyleSheet(DISABL_NAVI_COLOR);
-        //pBhome->setText("    ");
-        pBhome->setEnabled(false);
-    }
-
-    if (switchBitwise &16)
-    {
-        pBback->setStyleSheet(ACTIVE_NAVI_COLOR);
-        //pBback->setText("back");
-        pBback->setEnabled(true);
-    } else
-    if (switchBitwise &32)
-    {
-        pBback->setStyleSheet(DISABL_NAVI_COLOR);
-        //pBback->setText("    ");
-        pBback->setEnabled(false);
-    }
-
-
-
-}
-
-void MainWindow::enableNaviButtons(uint8_t buttonNr, bool enabled)
-{
-    if (buttonNr==1)
-    {
-        if (enabled)
-        {
-            pBback->setStyleSheet(ACTIVE_NAVI_COLOR);
-            //pBback->setText("back");
-            pBback->setEnabled(true);
-        } else
-        {
-            pBback->setStyleSheet(DISABL_NAVI_COLOR);
-            //pBback->setText("    ");
-            pBback->setEnabled(false);
-        }
-    } else
-    if (buttonNr==2)
-    {
-        if (enabled)
-        {
-            pBhome->setStyleSheet(ACTIVE_NAVI_COLOR);
-            //pBhome->setText("home");
-            pBhome->setEnabled(true);
-        } else
-        {
-            pBhome->setStyleSheet(DISABL_NAVI_COLOR);
-            //pBhome->setText("    ");
-            pBhome->setEnabled(false);
-        }
-    } else
-    if (buttonNr==3)
-    {
-        if (enabled)
-        {
-            pBforward->setStyleSheet(ACTIVE_NAVI_COLOR);
-            //pBforward->setText("next");
-            pBforward->setEnabled(true);
-        } else
-        {
-            pBforward->setStyleSheet(DISABL_NAVI_COLOR);
-            //pBforward->setText("    ");
-            pBforward->setEnabled(false);
-        }
-    }
-
-}
-
-
-
-// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-// control work flow by Finite state machine
-// %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-static uint16_t chainCurrentStep, chainNextStep;
-static bool chain_stepIni;
-
-void MainWindow::chainIni(void)
-{
-    // called once after power-up by constructor
-    chainCurrentStep=WCS_STARTSCREEN;     // start screen
-    chainNextStep=chainCurrentStep;
-    switchScreen(chainCurrentStep);
-    chain_stepIni=true;
-//qDebug()<<"chain ini, call step "<<WCS_STARTUP << " " << chainCurrentStep;
-}
-
-void MainWindow::chainControl(void)
-{
-
-    uint16_t nextScreen=0;
-    uint8_t  useNavi=0;
-    bool busy=false;
-    // working step chain:
-    if (chainCurrentStep != chainNextStep)
-    {
-        if (chainNextStep!=WCS_STARTSCREEN)
-        {
-            timerVendingTimeout->stop();
-            timerVendingTimeout->start(VENDINGTIMEOUT_MS);
-        }
-        //qDebug()<<"found new sreen";
-        chainCurrentStep=chainNextStep;
-        switchScreen(chainCurrentStep);
-        chain_stepIni=true;
-
-    }
-
-    if (chainCurrentStep==1)
-    {
-        if (chain_stepIni)
-            busy=myFenster01->work_ini(&nextScreen, &useNavi);
-        else
-            busy=myFenster01->working(&nextScreen, &useNavi);
-    } else
-
-    {
-        // error undefined step
-        qDebug()<<"error main chain control, wrong step ("<<chainCurrentStep<<") selected";
-        
-    }
-
-    if (chain_stepIni)
-    {
-        chain_stepIni=false;
-        switchScreen(chainCurrentStep);       // the mainWindow frame has always the same number as the working step
-    }
-
-    if (nextScreen>0)
-    {
-        // call next chain step
-        //qDebug()<<"chain control: new step selected: "<< nextScreen;
-
-        chainNextStep=nextScreen;
-    }
-    if (useNavi>0)
-    {
-        //qDebug()<<"chain control: navi buttons "<< useNavi;
-        enableNaviButtons(useNavi);
-    }
-
-    if (busy>0)
-    {
-        // reset time-out
-        timerVendingTimeout->start();
-    }
-
-}
-
-
-
-void MainWindow::vendingTimeout(void)
-{
-    // there was no user operation for 30s so return to start screen
-//    uint16_t nextScreen=WCS_STARTSCREEN;
-//    chainNextStep=nextScreen;             erstmal stilllegen, stört bei IBN
-    //qDebug()<<"chain control: vending TO";
-    timerVendingTimeout->stop();
-}
-
-
-

dCArun/mainwindow.h

@@ -1,72 +0,0 @@
-#ifndef MAINWINDOW_H
-#define MAINWINDOW_H
-
-#include <QMainWindow>
-#include <QTimer>
-#include <QGroupBox>
-#include <QStyle>
-#include <QVBoxLayout>
-#include <QHBoxLayout>
-#include <QGridLayout>
-#include <QLabel>
-#include <QDebug>
-#include <QPushButton>
-#include <QDialog>
-#include <QWidget>
-#include <QApplication>
-#include <QObject>
-#include <QDateTime>
-#include <QDate>
-#include <QTime>
-
-#include <QPluginLoader>
-#include <QDir>
-#include "plugin.h"
-#include "stepList.h"
-//#include "stepList.h" // define all working chain steps here
-#include "win01_com.h"
-
-
-class MainWindow : public QMainWindow
-{
-    Q_OBJECT
-
-    QPushButton *pBback;
-    QPushButton *pBhome;
-    QPushButton *pBforward;
-    QGroupBox   *bigGroupbox;
-    QHBoxLayout *bigLayout;
-    QTimer      *timerChainCtrl;
-    QTimer      *timerVendingTimeout;
-
-    QGroupBox   *frame01;
-    T_winComPort    *myFenster01;
-
-    void HideAllWindows();
-    void switchScreen(uint16_t winNr);
-    char loadPlugIn(char lade1_entlade2);
-    QDir plugInDir;
-    void chainIni(void);
-
-public:
-    hwinf *HWaccess=nullptr;        // global pointer to plugin-class
-
-    MainWindow(QWidget *parent = nullptr);
-    ~MainWindow();
-
-#define BACKBUTTON  1
-#define HOMEBUTTON  2
-#define FORWBUTTON  3
-    void enableNaviButtons(uint8_t buttonNr, bool enabled);
-    void enableNaviButtons(uint8_t switchBitwise);
-
-private slots:
-    void chainControl();
-    void vendingTimeout();
-
-};
-
-
-
-
-#endif // MAINWINDOW_H

dCArun/stepList.h

@@ -1,210 +0,0 @@
-#ifndef STEPLIST_H
-#define STEPLIST_H
-
-
-// define all working chain steps
-// every FSM-Step get's a frame in MainWindow with the same number and a self-designed GUI
-// labels are used for switchScreen( label=nr );
-// numbers are important: e.g. number 3 calls frame3 and frame3 includes subClass "T_fenster03"
-// so best solution: label = same name like class (in example: Fenster03). Label is fixed bound to number, never change!
-
-// numbers are fixed assosiated with the function (e.g. ComPort), can't be changed.
-// but screen order can be called in step chain randomly
-
-
-// Windownumbers for certain function, never change
-#define     PAGE_COMPORT            1
-#define     PAGE_SERVICEMAIN        2
-#define     PAGE_TIMEDATEVERSION    3
-#define     PAGE_MACHINESTATUS      4
-#define     PAGE_CHECKDOORS         5
-#define     PAGE_PRINTER            6
-#define     PAGE_COINMECHANIC       7
-#define     PAGE_MIFARE             8
-#define     PAGE_MODEM              9
-#define     PAGE_COINPAYMENT        10
-#define     PAGE_VAULTRECORD        11
-#define     PAGE_BOOTLOADER         12
-#define     PAGE_PROG_JSON          13
-#define     PAGE_COINCHANGER        14
-#define     PAGE_BILLREADER         15
-#define     PAGE_NEXT16             16
-#define     PAGE_NEXT17             17
-#define     PAGE_NEXT18             18
-#define     PAGE_NEXT19             19
-#define     PAGE_NEXT20             20
-
-//          fix:                customize:
-#define     WCS_STARTSCREEN     PAGE_COMPORT
-
-// PAGE_COMPORT:
-#define     WCS_WIN01BAK    PAGE_COMPORT
-#define     WCS_WIN01MID    PAGE_SERVICEMAIN
-#define     WCS_WIN01FWD    PAGE_SERVICEMAIN
-
-// PAGE_SERVICEMAIN:
-#define     WCS_WIN02BAK    PAGE_COMPORT
-#define     WCS_WIN02MID    PAGE_SERVICEMAIN
-#define     WCS_WIN02FWD    PAGE_TIMEDATEVERSION
-
-// PAGE_TIMEDATEVERSION:
-#define     WCS_WIN03BAK    PAGE_SERVICEMAIN
-#define     WCS_WIN03MID    PAGE_SERVICEMAIN
-#define     WCS_WIN03FWD    PAGE_MACHINESTATUS
-
-// PAGE_MACHINESTATUS:
-#define     WCS_WIN04BAK    PAGE_TIMEDATEVERSION
-#define     WCS_WIN04MID    PAGE_SERVICEMAIN
-#define     WCS_WIN04FWD    PAGE_CHECKDOORS
-
-
-// PAGE_CHECKDOORS:
-#define     WCS_WIN05BAK    PAGE_MACHINESTATUS
-#define     WCS_WIN05MID    PAGE_SERVICEMAIN
-#define     WCS_WIN05FWD    PAGE_COINMECHANIC
-
-// PAGE_COINMECHANIC:
-#define     WCS_WIN07BAK    PAGE_CHECKDOORS
-#define     WCS_WIN07MID    PAGE_SERVICEMAIN
-#define     WCS_WIN07FWD    PAGE_COINPAYMENT
-
-// PAGE_COINPAYMENT:
-#define     WCS_WIN10BAK    PAGE_COINMECHANIC
-#define     WCS_WIN10MID    PAGE_SERVICEMAIN
-#define     WCS_WIN10FWD    PAGE_COINCHANGER
-
-// PAGE_COINCHANGER:
-#define     WCS_WIN14BAK    PAGE_COINPAYMENT
-#define     WCS_WIN14MID    PAGE_SERVICEMAIN
-#define     WCS_WIN14FWD    PAGE_BILLREADER
-
-
-// PAGE_BILLREADER:
-#define     WCS_WIN15BAK    PAGE_COINCHANGER
-#define     WCS_WIN15MID    PAGE_SERVICEMAIN
-#define     WCS_WIN15FWD    PAGE_PRINTER
-
-// PAGE_PRINTER:
-#define     WCS_WIN06BAK    PAGE_BILLREADER
-#define     WCS_WIN06MID    PAGE_SERVICEMAIN
-#define     WCS_WIN06FWD    PAGE_MIFARE
-
-// PAGE_MIFARE:
-#define     WCS_WIN08BAK    PAGE_PRINTER
-#define     WCS_WIN08MID    PAGE_SERVICEMAIN
-#define     WCS_WIN08FWD    PAGE_MODEM
-
-// PAGE_MODEM:
-#define     WCS_WIN09BAK    PAGE_MIFARE
-#define     WCS_WIN09MID    PAGE_SERVICEMAIN
-#define     WCS_WIN09FWD    PAGE_VAULTRECORD
-
-
-// PAGE_VAULTRECORD:
-#define     WCS_WIN11BAK    PAGE_MODEM
-#define     WCS_WIN11MID    PAGE_SERVICEMAIN
-#define     WCS_WIN11FWD    PAGE_PROG_JSON
-
-// PAGE_PROG_JSON:
-#define     WCS_WIN13BAK    PAGE_VAULTRECORD
-#define     WCS_WIN13MID    PAGE_SERVICEMAIN
-#define     WCS_WIN13FWD    PAGE_BOOTLOADER
-
-// PAGE_BOOTLOADER:
-#define     WCS_WIN12BAK    PAGE_PROG_JSON
-#define     WCS_WIN12MID    PAGE_SERVICEMAIN
-#define     WCS_WIN12FWD    PAGE_NEXT16
-
-
-// PAGE_NEXT16
-#define     WCS_WIN16BAK    PAGE_BOOTLOADER
-#define     WCS_WIN16MID    PAGE_SERVICEMAIN
-#define     WCS_WIN16FWD    PAGE_NEXT17
-
-// PAGE_NEXT17
-#define     WCS_WIN17BAK    PAGE_NEXT16
-#define     WCS_WIN17MID    PAGE_SERVICEMAIN
-#define     WCS_WIN17FWD    PAGE_NEXT18
-
-// PAGE_NEXT18
-#define     WCS_WIN18BAK    PAGE_NEXT17
-#define     WCS_WIN18MID    PAGE_SERVICEMAIN
-#define     WCS_WIN18FWD    PAGE_NEXT19
-
-// PAGE_NEXT19
-#define     WCS_WIN19BAK    PAGE_NEXT18
-#define     WCS_WIN19MID    PAGE_SERVICEMAIN
-#define     WCS_WIN19FWD    PAGE_NEXT20
-
-// PAGE_NEXT20
-#define     WCS_WIN20BAK    PAGE_NEXT19
-#define     WCS_WIN20MID    PAGE_SERVICEMAIN
-#define     WCS_WIN20FWD    PAGE_SERVICEMAIN
-
-// just for Template
-#define     WCS_WIN99BAK    PAGE_SERVICEMAIN
-#define     WCS_WIN99MID    PAGE_SERVICEMAIN
-#define     WCS_WIN99FWD    PAGE_SERVICEMAIN
-
-
-
-#define     WIN02_LABEL_SHORT01     " Status"
-#define     WCS_WIN02SHORT01    PAGE_MACHINESTATUS
-#define     WIN02_LABEL_SHORT02     " Doors "
-#define     WCS_WIN02SHORT02    PAGE_CHECKDOORS
-#define     WIN02_LABEL_SHORT03     "Coin mech"
-#define     WCS_WIN02SHORT03    PAGE_COINMECHANIC
-#define     WIN02_LABEL_SHORT04     "Payment"
-#define     WCS_WIN02SHORT04    PAGE_COINPAYMENT
-
-#define     WIN02_LABEL_SHORT05     "Changer"
-#define     WCS_WIN02SHORT05    PAGE_COINCHANGER
-#define     WIN02_LABEL_SHORT06     " Bill  "
-#define     WCS_WIN02SHORT06    PAGE_BILLREADER
-#define     WIN02_LABEL_SHORT07     "Printer"
-#define     WCS_WIN02SHORT07    PAGE_PRINTER
-
-#define     WIN02_LABEL_SHORT08     "Program"
-#define     WCS_WIN02SHORT08    PAGE_VAULTRECORD
-#define     WIN02_LABEL_SHORT09     "      "
-#define     WCS_WIN02SHORT09    PAGE_SERVICEMAIN
-#define     WIN02_LABEL_SHORT10     "      "
-#define     WCS_WIN02SHORT10    PAGE_SERVICEMAIN
-
-
-
-
-
-
-
-// set needed navigation buttons, use | to combine more then one:
-#define     SWITCH_NEXT_ON      1
-#define     SWITCH_NEXT_OFF     2
-#define     SWITCH_HOME_ON      4
-#define     SWITCH_HOME_OFF     8
-#define     SWITCH_BACK_ON      16
-#define     SWITCH_BACK_OFF     32
-// example: *useNavi=SWITCH_BACK_ON;   // change only this one, or set all:
-//          *useNavi=SWITCH_BACK_OFF | SWITCH_HOME_OFF | SWITCH_NEXT_ON;
-
-
-
-// some defines for Widget design:
-
-#define     TS_VALUEBOX_FRAMESTYLE      0x0032
-#define     TS_VALUEBOX_LINEWIDTH       3
-
-//genDatPort->setFrameStyle(QFrame::Panel |  QFrame::Sunken ); funktioniert aber gibt unverständliche Warnung
-// QFrame::Panel = 0x0002    QFrame::Sunken=0x0030
-//genDatPort->setFrameStyle(0x0032);      //  funktioniert und gibt keine Warnung
-//genDatPort->setFrameStyle(TS_VALUEBOX_FRAMESTYLE);      //  funktioniert und gibt keine Warnung
-
-#define     TS_LED_FRAMESTYLE      0x0031
-// QFrame::Box | QFrame::Sunken
-
-
-
-
-
-
-#endif // STEPLIST_H

dCArun/win01_com.cpp

@@ -1,609 +0,0 @@
-#include "win01_com.h"
-#include "stepList.h"       // define all working chain steps here
-#include "datei.h"
-//#include "globVars.h"
-
-
-
-// %%%%%%%%%%%%%%%%%%%%   TabComPort
-
-Console::Console(QWidget *parent) : QPlainTextEdit(parent)
-{
-    document()->setMaximumBlockCount(100);
-    QPalette p = palette();
-    p.setColor(QPalette::Base, Qt::black);  //geht nicht weil untergrund schon farbig
-    p.setColor(QPalette::Text, Qt::blue);
-    setPalette(p);
-
-}
-
-void Console::putData(const QByteArray &data)
-{
-    insertPlainText(data);
-    insertPlainText("\n");
-    QScrollBar *bar = verticalScrollBar();
-    bar->setValue(bar->maximum());
-}
-
-void Console::putText(QString text)
-{
-    insertPlainText(text);
-    insertPlainText("\n");
-    QScrollBar *bar = verticalScrollBar();
-    bar->setValue(bar->maximum());
-}
-
-void T_winComPort::subPortInfo()
-{
-
-    // Port Info Anzeige Feld, 2. Zeile links
-    QStringList myStringList;
-    QStringList comboPortList;
-
-    const auto infos = QSerialPortInfo::availablePorts();
-    for (const QSerialPortInfo &info : infos)
-    {
-        myStringList.append(QObject::tr(" \n Port: ") + info.portName() );
-        myStringList.append(QObject::tr("Location: ") + info.systemLocation()); // + "\n");
-        myStringList.append(QObject::tr("Description: ") + info.description() );
-        myStringList.append(QObject::tr("Manufacturer: ") + info.manufacturer());
-        myStringList.append(QObject::tr("Serial number: ") + info.serialNumber());
-        myStringList.append (QObject::tr("Vendor Id: ") + QString::number(info.vendorIdentifier(), 16));
-        myStringList.append(QObject::tr("Product Id: ") +QString::number(info.productIdentifier(), 16));
-        //myStringList.append(QObject::tr("Busy: ") + (info.isBusy() ? QObject::tr("Yes") : QObject::tr("No")));
-        comboPortList.append(info.portName());  // wenn Comport im System vorhanden dann in die Liste eintragen
-    }
-    QListWidget *myListWidget = new QListWidget;
-    myListWidget->insertItems(0, myStringList);
-    myListWidget->setMaximumWidth(250);
-    myTabComLayout->addWidget(myListWidget,1,0);
-
-
-    // ComboBox Comport Nr:
-    CB_portSel = new QComboBox();
-    CB_portSel->addItems(comboPortList);       //  string Liste mit addItems (s am Schluss) !
-    CB_portSel->setMinimumHeight(30);
-    CB_portSel->setMaximumWidth(150);
-    QFont myCBfont;
-    //myCBfont.setBold(true);
-    myCBfont.setPixelSize(15);
-    CB_portSel->setFont(myCBfont);
-    CB_portSel->setCurrentIndex(2);     // default 3. Comport in der Liste = ttymxc2 in PTU5
-    myTabComLayout->addWidget(CB_portSel, 4,0);
-
-}
-
-void T_winComPort::callOpenSerial()
-{
-    // Taste Connect wurde gedrückt, eine Klasse/einen Slot aus einer übergeordneten Klasse:
-    // openSerialPort();
-    // kann man nicht aufrufen. deshalb: speichere ComPort, Baudrate und Startbefehl global.
-    // Von dort wird mit einem zyklischen Timer ausgelesen
-
-    int br, ci;
-    QString bs, cn;
-    //br=CB_baudSel->currentIndex();
-    //bs=CB_baudSel->currentText();
-    br=5;
-    bs="115200";
-    cn=CB_portSel->currentText();
-    ci=CB_portSel->currentIndex();
-
-    // aktuell: br=5  bs=115200 cn=0 (=Com5)
-    //epi_setSerial(5,"115200","COM5",1);
-    //  epi_setSerial(br, bs, cn, 1);
-
-    // new: save values for next time
-    QByteArray myBA, tmpBA;
-    myBA.clear(); tmpBA.clear();
-    myBA.append('s');   // start sign, not used
-    myBA.append(FILESEPERATOR);
-    tmpBA.setNum(br,10);
-    myBA.append(tmpBA);
-    myBA.append(FILESEPERATOR); 
-    myBA.append(bs.toLatin1());
-    myBA.append(FILESEPERATOR);
-    myBA.append(cn.toLatin1());
-    myBA.append(FILESEPERATOR);
-    tmpBA.clear();
-    tmpBA.setNum(ci,10);
-    myBA.append(tmpBA);
-    myBA.append(FILESEPERATOR);
-
-    datei_clearFile(FILENAME_COMPORT);
-    datei_writeToFile(FILENAME_COMPORT, myBA);
-    qDebug() << "winComPort opening serial with: " << br << " " << bs << " " << cn;
-    HWaccess->dc_openSerial(br, bs, cn, 1);// same function with hwapi
-    // void dc_openSerial(int BaudNr, QString BaudStr, QString ComName, uint8_t connect)
-            // BaudNr:  0:1200   1:9600   2:19200   3:38400   4:57600   5:115200
-            // BaudStr: for exapmle "19200"
-            // ComName: for example "COM48"
-            // connect: 0, 1
-
-    emit connectButtonPressed();
-}
-
-void T_winComPort::callCloseSerial()
-{
-    HWaccess->dc_closeSerial();
-    // epi_closeSerial();   // same function without hwapi
-    emit closeButtonPressed();
-}
-
-void T_winComPort::callAutoSend()
-{
-    if (AutSendButton->isChecked())
-    {
-        HWaccess->dc_autoRequest(1);
-        emit autoSendButtonIsOn();
-    } else
-    {
-        HWaccess->dc_autoRequest(0);
-
-        emit autoSendButtonIsOff();
-    }
-
-}
-
-void T_winComPort::callRefresh(void)
-{
-    subPortInfo();
-}
-
-void T_winComPort::callConnectToggle()
-{
-   if (connectButton->isChecked())
-    {
-        //qDebug() << "down";
-
-        callOpenSerial();
-    } else
-    {
-        //qDebug() << "released";
-        callCloseSerial();
-    }
-
-}
-
-void T_winComPort::getDcTestRS232()
-{
-    //qDebug() << "request test response...";
-   HWaccess->dc_requTestResponse();
-
-
-}
-
-
-void T_winComPort::newBaud(void)
-{
-
-    qDebug() << "new baud selected...";
-
-}
-
-void T_winComPort::setButtons4autoStart()
-{
-    connectButton->setEnabled(true);
-    connectButton->setDown(true);
-    connectButton->setChecked(true);
-
-    AutSendButton->setEnabled(true);
-    AutSendButton->setDown(true);
-    AutSendButton->setChecked(true);
-
-
-}
-
-
-T_winComPort::T_winComPort(hwinf *HWaccess, QWidget *parent) : QWidget(parent)
-{
-    this->HWaccess = HWaccess;
-
-    myTabComLayout = new QGridLayout;
-    //QGridLayout *myGridLayout = new QGridLayout();
-
-    // Überschrift linke Spalte
-    QLabel *portListLabel2 = new QLabel(tr("in System available Ports:"));
-    myTabComLayout->addWidget(portListLabel2, 0,0);
-
-    // Überschrift rechte Spalte
-    QLabel *lab_headlineR = new QLabel(tr("Serial traffic:"));
-    myTabComLayout->addWidget(lab_headlineR, 0, 1);
-
-    subPortInfo();
-    // sende-empfangs-Rohdaten-Fenster, 2. Zeile rechts
-    myDiagWindow = new Console();
-    myDiagWindow->setReadOnly(true);
-    myDiagWindow->setEnabled(true);
-    //myDiagWindow->setLocalEchoEnabled(p.localEchoEnabled);
-    //myDiagWindow->setMinimumWidth(300);
-    //myDiagWindow->putData("ongoing serial traffic: ");
-    myTabComLayout->addWidget(myDiagWindow, 1,1);
-
-// links:
-    // refresh button:
-    refreshButton = new QPushButton(tr("&refresh"));
-    refreshButton->setCheckable(false);      // true = toggle button
-    refreshButton->setAutoDefault(false);   // beim start aus
-    //refreshButton->setMaximumWidth(90);
-    myTabComLayout->addWidget(refreshButton, 2,0);
-    //connect(refreshButton, &QAbstractButton::clicked, this, &T_fenster01::callRefresh);
-    connect(refreshButton, SIGNAL(clicked()), this, SLOT(callRefresh()));
-
-
-    QLabel *Label3 = new QLabel(tr("Port:"));
-    myTabComLayout->addWidget(Label3, 3,0);
-
-
-
-    QLabel *Label4 = new QLabel(tr("Baud:"));
-    myTabComLayout->addWidget(Label4, 5,0);
-
-    // ComboBox Baudrate:
-    QFont my2CBfont;
-    //my2CBfont.setBold(true);
-    my2CBfont.setPixelSize(15);
-/*
-    CB_baudSel = new QComboBox();
-    CB_baudSel->addItem(tr("1200"));
-    CB_baudSel->addItem(tr("9600"));
-    CB_baudSel->addItem(tr("19200"));
-    CB_baudSel->addItem(tr("38400"));
-    CB_baudSel->addItem(tr("57600"));
-    CB_baudSel->addItem(tr("115200"));
-    CB_baudSel->setMinimumHeight(30);
-    CB_baudSel->setMaximumWidth(150);
-    CB_baudSel->setFont(my2CBfont);
-    CB_baudSel->setCurrentIndex(5);     // default 115k baud
-    //CB_baudSel->setCurrentIndex(1);     // default 9600 baud
-    myTabComLayout->addWidget(CB_baudSel, 6,0);
-    //connect(CB_baudSel, SIGNAL(currentIndexChanged(int)), this, SLOT(newBaud()));
-    connect(CB_baudSel, SIGNAL(currentIndexChanged(int)), this, SLOT(newBaud()));
-*/
-    // Statuszeile COM Port  (serial Port)
-    LabelComState = new QLabel(tr("not connected"));
-    myTabComLayout->addWidget(LabelComState, 7,0);
-
-    // Connect button:
-    connectButton = new QPushButton(tr("&Connect"));
-    connectButton->setCheckable(true);      // true = toggle button
-    connectButton->setAutoDefault(true);   // beim start ein
-    connectButton->setMaximumWidth(90);
-    connectButton->setMinimumHeight(50);
-    myTabComLayout->addWidget(connectButton, 8,0);
-    //connect(connectButton, &QAbstractButton::clicked, this, &T_fenster01::callConnectToggle);
-    connect(connectButton, SIGNAL(clicked()), this, SLOT(callConnectToggle()));
-
-
-// rechts:
-
-    // test serial line:
-    TestButton = new QPushButton(tr("test Connection"));
-    TestButton->setMaximumWidth(150);
-    myTabComLayout->addWidget(TestButton,2,1);
-    TestButton->setCheckable(false);      // true = toggle button
-    TestButton->setAutoDefault(false);   // beim start aus
-//    connect(TestButton, &QAbstractButton::clicked, this, &T_fenster01::getDcTestRS232);
-    connect(TestButton, SIGNAL(clicked()), this, SLOT(getDcTestRS232()));
-
-    // I Statuszeile Handshakes (serial Control)   flow.cpp
-    // geht überhaupt was raus? kommt überhaupt was zurück?
-    //LabelHandshakes = new QLabel(tr("control line"));
-    LabelHandshakes = new QLabel("HS");       // not used
-    myTabComLayout->addWidget(LabelHandshakes, 3,1);
-
-    // II Statuszeile Auswertung der SlaveResponse (serial Frame, CRC usw)  (prot.cpp)
-    LabelRecieveFrame = new QLabel(tr("slave receive"));
-    myTabComLayout->addWidget(LabelRecieveFrame, 4,1);
-
-    // III Anzeige der Slave-Results (Datif)
-    LabelResults = new QLabel(tr("results line"));
-    myTabComLayout->addWidget(LabelResults, 5,1);
-
-    // IV Statuszeile Sende- und Empfangsdaten brauchbar? (Datif)
-    LabelDataState = new QLabel(tr("datif line"));
-    myTabComLayout->addWidget(LabelDataState, 6,1);
-
-    // V
-    LabelDatif = new QLabel(tr("datif line"));
-    myTabComLayout->addWidget(LabelDatif, 7,1);
-
-    // Autosend:
-    AutSendButton = new QPushButton(tr("&Automatic reading"));       // &A --> also keycode Alt-A possible
-    //AutSendButton->setMaximumWidth(90);
-    myTabComLayout->addWidget(AutSendButton,8,1);
-    AutSendButton->setCheckable(true);      // true = toggle button
-    AutSendButton->setAutoDefault(true);   // beim start aus
-    AutSendButton->setMinimumHeight(50);
-//    connect(AutSendButton, &QAbstractButton::clicked, this, &T_fenster01::callAutoSend);
-    connect(AutSendButton, SIGNAL(clicked()), this, SLOT(callAutoSend()));
-
-    setLayout(myTabComLayout);
-    myNextStep=0;
-    myStep=0;
-    callConnectToggle();
-    callAutoSend();
-
-    myTO = new QTimer();
-    myTO->setSingleShot(true);
-    myTO->start(2000);
-
-
-}
-
-// not needed:
-T_winComPort::~T_winComPort()
-{
-    close();
-}
-
-void T_winComPort::Nav_back(void)
-{
-    myNextStep=WCS_WIN01BAK;
-}
-void T_winComPort::Nav_home(void)
-{
-    myNextStep=WCS_WIN01MID;
-}
-void T_winComPort::Nav_next(void)
-{
-    myNextStep=WCS_WIN01FWD;
-}
-
-bool T_winComPort::work_ini(uint16_t *nextScreen, uint8_t *useNavi)
-{
-    // one state of the vending/operating FSM
-    // called ONE time after selecting this state (initialization)
-    // useNavi=0: no change
-    // bit0,1: enable/disable button "next"
-    // bit2,3: enable/disable button "home"
-    // bit4,5: enable/disable button "back"
-
-    *nextScreen=0;   // needed  0=no change
-//    *useNavi=SWITCH_BACK_OFF | SWITCH_HOME_OFF | SWITCH_NEXT_ON;
-    *useNavi=SWITCH_BACK_OFF | SWITCH_HOME_OFF | SWITCH_NEXT_OFF;   // bei CArun alle aus
-    return false;
-}
-
-bool T_winComPort::working(uint16_t *nextScreen, uint8_t *useNavi)
-{
-    // one state of the vending/operating FSM
-    // called cyclic until this state changes intentionally to another state
-    // display informations for human operator, react on operators inputs or wait for payment media
-
-    // useNavi=0: no change
-    // bit0,1: enable/disable button "next"
-    // bit2,3: enable/disable button "home"
-    // bit4,5: enable/disable button "back"
-    QString  bs, cn;
-    int br, ci;
-
-
-    this->updateGui();
-    *nextScreen=0;   // 0=no change
-    *useNavi=0;
-
-    if (myStep==0)
-    {
-        // load and use last settings:  --------------------
-        QByteArray myBA;
-        myBA=datei_readFromFile(FILENAME_COMPORT);
-        if (myBA.length()>0)
-        {
-            bs=csv_getEntryAsString(myBA,0);      // read the 's'     war 2!??
-            br=csv_getEntryAsInt(myBA,1);               // z.B. 5 (5.Eintrag in der Baud-Liste)
-            bs=csv_getEntryAsString(myBA,2);                // z.B 115200
-            cn=csv_getEntryAsString(myBA,3);       // z.B. COM9
-            ci=csv_getEntryAsInt(myBA,4);               // Eintragsnummer in COM-Fenster
-            HWaccess->dc_openSerial(br,bs,cn,1);
-            CB_portSel->setCurrentIndex(ci);    // den Port aus der Datei hier vorgeben
-            connectButton->setChecked(true);    // connect Taste "druecken"
-        } else
-        {
-            // open with default settings
-            qDebug()<<"CArunGui: open serial with default values";
-
-            bs="115200";
-            br=5;
-            //cn="COM14";     // Windows
-            cn="ttymxc2";   // PTU5
-            ci=2;
-            HWaccess->dc_openSerial(br,bs,cn,1);
-
-        }
-        myTO->start(100);     // restart
-        myStep++;
-    } else
-
-    if (myStep==1)
-    {
-        if (!myTO->isActive())
-        {
-            if (HWaccess->dc_isPortOpen())
-            {
-                myStep++;
-            } else
-            {
-                myStep=6;   // 13.12.23: start Autoconnect cycle
-                qDebug()<<"CArunGui: port is still closed, restarting..";
-            }
-            myTO->start(100);
-        }
-    } else
-
-    if (myStep==2)
-    {
-        if (!myTO->isActive())
-        {
-            HWaccess->dc_requTestResponse();
-            myStep++;
-            myTO->start(100);
-        }
-    } else
-
-    if (myStep==3)
-    {
-        if (!myTO->isActive())
-        {
-            if (HWaccess->dc_readAnswTestResponse())
-                myStep++;   // response was correct
-            else
-            {
-                myStep=6;   // 13.12.23: start Autoconnect cycle
-                qDebug()<<"CArunGui: got no answer from DC, retry..";
-            }
-            myTO->start(100);
-        }
-
-    } else
-
-    if (myStep==4)
-    {
-        HWaccess->dc_autoRequest(1);
-        AutSendButton->setChecked(true);        // taste "druecken"
-        myStep++;
-        myTO->start(2000);
-    } else
-
-    if (myStep==5)
-    {
-        if (!myTO->isActive())
-        {
-            if (HWaccess->sys_areDCdataValid())
-            {
-                qDebug()<<"CArunGui: DC is connected";
-                myStep=7;  // OK, connection is up and running
-            }  else
-            {
-                qDebug()<<"CArunGui: auto request is not running, retry...";
-                myStep++;
-                myTO->start(100);
-            }
-        }
-
-    } else
-
-    if (myStep==6)
-    {
-        // restart autoconnect cycle
-        myTO->start(100);     // restart
-        myStep=0;
-    } else
-
-    if (myStep==7)
-    {
-        // stay here, DC connection is up and running
-
-
-    } else
-    {
-
-    }
-
-    if (myNextStep)
-    {
-        *nextScreen=myNextStep;
-        myNextStep=0;
-    }
-    return false;
-}
-
-
-void T_winComPort::updateGui(void)
-{
-    QByteArray myBA;
-    QString ms;
-
-     ms=HWaccess->dc_getTxt4RsDiagWin();
-    if (ms.length()>1)  // sonst ständig scrolling
-    {
-       myDiagWindow->putText(ms);
-       HWaccess->dc_clrTxt4RsDiagWin();
-    }
-
-     ms=HWaccess->dc_get2ndTxt4RsDiagWin();
-    if (ms.length()>1)  // sonst ständig scrolling
-    {
-        myDiagWindow->putText(ms);
-        HWaccess->dc_clr2ndTxt4RsDiagWin();
-    }
-
-    // state of the COM Port (open, closed)
-    ms=HWaccess->dc_getSerialState();
-    if (ms.length()>1)  // sonst ständig scrolling
-    {
-        LabelComState->setText(ms);
-    }
-
-    // --------------------------------------------------------------------------
-    // I  Statuszeile Handshakes (serial Control)
-
-    ms=HWaccess->dc_getTxt4HsStateLine();
-    if (!connectButton->isChecked())
-        ms="";
-    if (ms.length()>1)  // sonst ständig scrolling
-    {
-        LabelHandshakes->setText(ms);
-        HWaccess->dc_clrTxt4HsStateLine();
-        // clear to avoid multiple displaying
-    }
-
-
-    // II  Master receive state (empfangenes Telgramm OK? crc? length?  )
-    // Statuszeile Auswertung der SlaveResponse (serial Frame, CRC usw)  (prot.cpp)
-
-    ms=HWaccess->dc_getTxt4masterStateLine();
-    if (!connectButton->isChecked())
-        ms="---";
-    if (ms.length()>1)  // sonst ständig scrolling
-    {
-        LabelRecieveFrame->setText(ms);
-        HWaccess->dc_clrTxt4masterStateLine();
-    }
-
-
-
-    // III   Slave receive (from Master) OK? if then show results, if not then show errors
-    // entweder Empfangsfehler anzeigen (crc? length?) oder result OUT-OK, OUT_ERR, IN_OK, IN_ERR
-    // Hintergrund: wenn der Slave Fehler im Master-Telegramm gefunden hat, dann kann er es auch
-    // nicht verwenden und nichts ausgeben oder einlesen
-
-    ms=HWaccess->dc_getTxt4resultStateLine();
-    if (!connectButton->isChecked())
-        ms="---";
-    if (ms.length()>1)  // sonst ständig scrolling
-    {
-        LabelResults->setText(ms);
-        HWaccess->dc_clrTxt4resultStateLine();
-    }
-
-
-    // IV  Statuszeile Empfangsdaten
-
-    ms=HWaccess->dc_getdataStateLine();
-    if (!connectButton->isChecked())
-        ms="---";
-    if (ms.length()>1)  // sonst ständig scrolling
-    {
-        LabelDataState->setText(ms);
-        HWaccess->dc_clrTxt4dataStateLine();
-        // clear to avoid multiple displaying
-    }
-
-
-    // 5. Zeile: Datif Ergebnis, Daten brauchbar?
-
-    ms=HWaccess->dc_getdatifLine();
-    if (!connectButton->isChecked())
-        ms="---";
-    if (ms.length()>1)  // sonst ständig scrolling
-    {
-        LabelDatif->setText(ms);
-        HWaccess->dc_clrTxt4datifLine();
-    }
-
-    // -----------------------------------------------------------------------------
-
-}
-
-

dCArun/win01_com.h

@@ -1,107 +0,0 @@
-#ifndef WINCOMPORT_H
-#define WINCOMPORT_H
-
-#include <QVBoxLayout>
-#include <QHBoxLayout>
-#include <QGridLayout>
-#include <QObject>
-#include <QTimer>
-#include <QDebug>
-#include <QTabWidget>
-#include <QScrollBar>
-#include <QPlainTextEdit>
-#include <QComboBox>
-#include <QLabel>
-#include <QScrollArea>
-#include <QSerialPortInfo>
-#include <QWidget>
-#include <QListWidget>
-#include <QGroupBox>
-#include <QPushButton>
-#include <QRadioButton>
-//#include "tslib.h"
-//#include "stepList.h"       // define all working chain steps here
-//#include "datei.h"
-#include "plugin.h"
-//#include "globVars.h"
-
-class Console : public QPlainTextEdit
-{
-    Q_OBJECT
-
-public:
-    explicit Console(QWidget *parent = nullptr);
-
-    void putData(const QByteArray &data);
-    void putText(QString text);
-};
-
-class T_winComPort : public QWidget      // former TabComport
-{
-    Q_OBJECT
-    Console *myDiagWindow;      // Ausgabefenster
-    QComboBox *CB_portSel;
-    //QComboBox *CB_baudSel;
-    QPushButton *connectButton;
-    QPushButton *AutSendButton;
-    QPushButton *TestButton;
-    QPushButton *refreshButton;
-
-    QLabel *LabelComState;      // Statusanzeige
-    QLabel *LabelPort;
-    QLabel *LabelHandshakes;
-    QLabel *LabelRecieveFrame;
-    QLabel *LabelResults;
-    QLabel *LabelDataState;
-    QLabel *LabelDatif;
-
-    QGridLayout *myTabComLayout;
-    void subPortInfo();
-    hwinf *HWaccess;
-    void updateGui(void);
-    uint16_t myNextStep;
-    uint8_t myStep;
-    QTimer *myTO;
-
-private slots:
-    void callOpenSerial();
-    void callCloseSerial();
-    void callAutoSend();
-    //void tabComTime100ms();
-    void callConnectToggle();
-    void getDcTestRS232();
-    void callRefresh(void);
-
-public:
-    explicit T_winComPort(hwinf *HWaccess = nullptr, QWidget *parent = nullptr);
-    bool work_ini(uint16_t *nextScreen, uint8_t *useNavi);
-        // useNavi=0: no change
-        // bit0,1: enable/disable button "next"
-        // bit2,3: enable/disable button "home"
-        // bit4,5: enable/disable button "back"
-    bool working (uint16_t *nextScreen, uint8_t *useNavi);
-    ~T_winComPort();
-
-    void writeRSdiagBytes(const QByteArray &bytarray);
-    void writeRSdiagText(QString text);
-    void writeComState(const QString text);
-    void writeDataState(const QString text);
-    void setButtons4autoStart();
-
-signals:
-    void connectButtonPressed();
-    void closeButtonPressed();
-    void autoSendButtonIsOn();
-    void autoSendButtonIsOff();
-
-private slots:
-    void newBaud(void); // just for test
-
-public slots:
-    void Nav_back(void);
-    void Nav_home(void);
-    void Nav_next(void);
-
-};
-
-#endif

include/com.h

@@ -3,10 +3,11 @@
 #ifndef SER_H
 #define SER_H
 #include <stdint.h>
-#include <QMainWindow>
+#include <QObject>
 //#include <QString>
 #include <QTimer>
 #include <QSerialPort>
+#include <QVector>
 #include "tslib.h"
 #include "controlBus.h"
 #include "interfaces.h"
@@ -32,6 +33,8 @@ class T_com : public QObject        //,  public QPlainTextEdit
 //    QSerialPort *CatSerial = nullptr;
     QSerialPort *CatSerial;
 
+    uint32_t writeCount = 0;
+
     //char oeffneSerialPort();
     char open_Serial_Port();
     void closeSerialPort();
@@ -61,6 +64,8 @@ public:
     bool readFromSerial(QByteArray &data, uint16_t &sendLength);
         // retval: true: data available
 
+    uint32_t getWriteCount() { return writeCount; }
+
 /*
     uint8_t getAllPortPins(void);
         // rs232pins: all signals bitwise coded in one byte:

include/datIf.h

@@ -161,11 +161,16 @@ class T_datif : public QObject
         // blockNr=transmitted in WRITEADDRESS low byte
 
     int     datif_noResponseCtr;
+    int     datif_nowNewDyns;
+    int     datif_nowNewStats;
 
     T_prot *myDCIF;
     QTimer *datif_trigger;
     uint8_t selectedSlaveAddr;
 
+    bool waitForTestResponse = false;
+    uint32_t readCount = 0;
+
 private slots:
     char datif_cycleSend();
     void StoredRecData();

include/dump.txt

@@ -0,0 +1,92 @@
+/*
+void incTextBuffer(void)
+{
+    runProc_prnSeqNr++;
+    runProc_pointPrnTxt=0;
+    if (runProc_prnSeqNr>127)
+        runProc_prnSeqNr=127;
+    runProc_prnCmdSeq[runProc_pointPrnCmd]=1;
+    runProc_prnCmdPara[runProc_pointPrnCmd++]=runProc_prnSeqNr;
+}*/
+/*
+void T_runProc::subAppendNxtTxt(char *textLine)
+{
+    // append given text to current sequence, respect max. sequ.length
+
+    // also send a command "print text buffer nn" ==1  once for each buffer
+    //static uint8_t runProc_prnCmdSeq[512];
+    //static uint8_t runProc_prnCmdPara[512];
+    //static uint16_t runProc_pointPrnCmd;
+
+    int sl=strlen(textLine);
+    if (sl>1024) sl=1024;
+    textLine[sl]=0;
+    if (runProc_prnSeqNr==0 && runProc_pointPrnTxt<3)
+    {
+        // then this is the very first text entry
+        // store command to print this buffer
+        runProc_prnCmdSeq[runProc_pointPrnCmd]=1;
+        runProc_prnCmdPara[runProc_pointPrnCmd++]=runProc_prnSeqNr;
+    }
+    if ( (runProc_pointPrnTxt + sl) > 1023)
+    {
+        incTextBuffer();
+
+    }
+    runProc_prnTextSeq[runProc_prnSeqNr].append(textLine);
+
+    //for (nn=0; nn<sl; nn++)
+    //{
+        //runProc_prnTextSeq[runProc_prnSeqNr][runProc_pointPrnTxt+nn]=textLine[nn];
+    //}
+}*/
+
+//    qCritical() << "emitting signal payCancelled";
+//    emit runProc_payCancelled();
+    /*
+     // gabs bei Szeged, jetzt nicht mehr:
+    if (payInProg==8)
+    {
+        // coin checker faulty, cannot start
+        if (hwapi_paymentStarted==1)
+        {
+            hwapi_paymentStarted=90;    // stop due to error
+            qCritical() << "emitting signal coinCollectionAborted 1";
+            emit runProc_coinCollectionAborted();
+            //sendFDcmd_set(156, 0,0, 2,0,0,0);       // cancel payment
+        }
+        return 10;    // error cannot start
+    }*/
+
+
+
+/*
+static uint8_t Sdata_DeviceParameter[64];
+static uint8_t Sdata_DevParaLen;
+
+uint8_t T_runProc::epi_store64BdevParameter(uint8_t length, uint8_t *buf)
+{
+    // HWapi writes data to be stored
+    uint8_t nn;
+    for (nn=0; nn<length; nn++)
+        Sdata_DeviceParameter[nn]=buf[nn];
+    for (nn=length; nn<64; nn++)
+        Sdata_DeviceParameter[nn]=0;
+
+    Sdata_DevParaLen=length;
+    return 0;
+}
+
+uint8_t T_runProc::epi_restore64BdevParameter(uint8_t *length, uint8_t *buf)
+{
+
+    for (uint8_t nn=0; nn<Sdata_DevParaLen; nn++)
+        buf[nn]=Sdata_DeviceParameter[nn];
+    *length=Sdata_DevParaLen;
+
+    return 0;
+}
+*/
+
+
+

include/hwapi.h

@@ -2,6 +2,7 @@
 matching interfaces.h:
 
 // History
+
 // 11.10.2021: V1.0  222 functions
 // 23.12.2021: V1.1  added block-parameter to function "read mifare data"
 // 30.12.2021: V1.2  added function: mif_clearDataBuffer(), mif_isBlockAvailable(uint8_t blkNr) and mif_getAvailableDataBlocks()
@@ -14,12 +15,32 @@ matching interfaces.h:
 //             V3.2 Bootloader improvement
 // 12.04.2023: V3.3 new features extended: loading and using Json-files, cash-collection, cash-data-logging
 
+
+14.7.23TS: patch for correct printer state in line 3364 in sys_getDeviceConditions(struct T_moduleCondition *devCond) const
+
+8.9.2023 two new functions (end of file) for mifare test. Interface version 4.4   DC4.40...4.43
+
+14.09.2023: Verriegelung eingebaut, nur noch gültige Abr.Daten zurückgeben, Suchbegriff: <epi_restoreVaultRecord>
+            alle Mifare-Funktionen ueberprueft und ggf verbessert
+    18.09.2023: Signal "Kasse entnommen" und Signale "Tuer auf/zu" ueberprueft
+
+20.9.2023: in datif die Abfrage der DynMachineData massiv beschleunigt
+            und hier in hwapi die entprellten Werte fuer Tueren und Kasse verwenden.
+            Problem war: Signal "Kasse entnommen" war zu langsam -> manchmal abr nicht gesendet
+
+14.3.24     new function bool hwapi::cash_isCollectionStarted(void) const
+            padding three struct to 64 byte to avoid stack overflow when using
+
 //#define HWINF_iid "Atb.Psa2020.software.HWapi/3.1"
 //#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.1"
 #define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.3"
 
 V4.0  6.9.2023: activating DC-Bootloader in slve-lib (SM)
 
+23.5.2024: prn_getHwState() fixed and moved down to runProc with a wrapper in hwapi, current version: 5.5
+        several new functions for "direct ticket print", without the dueway loading jsons to DC and cmd DC to print
+        The same rules as before apply to the json, but it can have any arbitrary length
+
 */
 
 
@@ -27,7 +48,6 @@ V4.0  6.9.2023: activating DC-Bootloader in slve-lib (SM)
 #define hwapi_H
 
 #include <stdint.h>
-//#include <QTabWidget>
 #include <QtPlugin>
 #include <QTimer>
 #include <QObject>
@@ -98,7 +118,7 @@ private:
     //QTimer *hwapi_triggerBL;
 
 public:
-    explicit hwapi(QWidget *parent = nullptr);
+    explicit hwapi(QObject *parent = nullptr);
 
 
     #ifdef  THIS_IS_CA_MASTER
@@ -570,12 +590,10 @@ public:
     // read printer condition and settings
 
     uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const override;
-        // retval: status byte
-            // byte 0 = 0: prnter OK,  >0: error
-            // bit0: paper low  1: no paper    2: temperature error
-            // 3: head open     4: paper jam in cutter
-            // 6: no response   7: bad response from printer
-        // and return struct "Tprn_hw_state"
+        // return value:  =prn_hw_state[0]
+        //       0:unknown   1: printer OK     100: printer OK but paper near end
+        //       200: not connected      201: printer on error     202: no paper
+
 
     bool prn_isUpAndReady(void) const override;
         // true: printer is powered, serial is ok, no error, printer is connected and resonding
@@ -604,7 +622,7 @@ public:
 
     void prn_movePaper(uint8_t wayInMm, uint8_t direction) const override;
         //direction: 1=forward 2=backward
-        //
+
     void prn_setFonts(uint8_t font, uint8_t size, uint8_t width, uint8_t height) const override;
         // font = kind of font 5...11 (0..22)
         // size = 6...20, 9..9: too tiny 10: small ...12 = normal size ...20=huge
@@ -1038,7 +1056,6 @@ public:
 
     void sys_getDynMachineConditions(struct T_dynamicCondition *dynMachCond) const override;
 
-
     uint32_t cash_getAmountInVault(void) const override;
 
     uint16_t cash_getNrCoinsInVault(void) const override;
@@ -1319,6 +1336,10 @@ public:
         // countOfBills: array of up to 16 sums,    countOfBills[0]=nr of 5€-bills in stacker
         //                                          countOfBills[1] for 10€   and so on
 
+    bool cash_isCollectionStarted(void) const override;
+
+
+
     // download device controller
     bool dcDownloadRequest(QString const &fileToDownload) const override;
     bool dcDownloadRequested() const override;
@@ -1355,10 +1376,34 @@ public:
 
     virtual QObject const *getAPI() override;
 
+    void mod_switchResetline(void) override;
+
+
+
+
+    // 22.5.2024 direct ticket printing
+
+    void prn_translateLocalPrinterJson(QByteArray jsonFile2print) const override;
+    // load, parse, translate and save the file
+
+    void prnStoreDynamics(char *bufferDynPrintVars[], uint8_t nrOfDyns) const override;
+        // store nrOfDyns (up to 16) dynamics before printing
+        // max length = 16 byte per dynamic
+        // 16 strings with up to 16bytes each
+
+    void prn_printTranslatedTicket(void) const override;
+
+    uint8_t prn_waitForDirectTicket(void) const override;
+
+
+
+
+
+
 signals:
-    void hwapi_reportDCDownloadStatus(QString const&) const;
-    void hwapi_reportDCDownloadSuccess(QString const&) const;
-    void hwapi_reportDCDownloadFailure(QString const&) const;
+    void hwapi_reportDCDownloadStatus(QString const&) const override;
+    void hwapi_reportDCDownloadSuccess(QString const&) const override;
+    void hwapi_reportDCDownloadFailure(QString const&) const override;
 
     void hwapi_templatePrintFinished_OK(void) const override;
     void hwapi_templatePrintFinished_Err(void) const override;
@@ -1386,6 +1431,8 @@ signals:
 
     void hwapi_coinAttached() const override;
 
+
+
  private slots:
     //void hwapi_slotPrintFinished_OK(void);
     //void hwapi_slotPrintFinished_Err(void);

include/interfaces.h

@@ -170,6 +170,7 @@ struct T_vaultRecord
 
 };
 
+// ATTENTION: struct length must be 64 exactly!!!
 struct T_moduleCondition
 {
         // store conditon of all system components, hold in RAM
@@ -178,48 +179,64 @@ struct T_moduleCondition
         // 50..99	= HINT / Notification
         // 100..150	= WARNING
         // 200..250	= ERROR
-
         uint8_t	ram;
         uint8_t	intEe;
         uint8_t	extEe;
-
         uint8_t	rtc;				// 1: time/date OK   100: time not plausible  200: hardware error
+
         uint8_t	boardHw;
         uint8_t	printer;
         uint8_t	modem;
-
         uint8_t	signal;				//		1...99
+
         uint8_t	regist;				// 100:not  1:reg  2:ping OK   3:gotTime
         uint8_t	mdbBus;
         uint8_t	coinChecker;		// EMP, OMP or mei-cashflow
-
         uint8_t	coinEscrow;
+
         uint8_t	mifareReader;       // 0: unknown  1=OK  200=no response  201=wrong response   202: Reader reports HW-error
         uint8_t	creditTerm;
         uint8_t	coinReject;
-
         uint8_t	coinSafe;
+
         uint8_t   billSafe;
         uint8_t	voltage;			// 1:11..14V
         uint8_t   temper;
-
         uint8_t	poweronTest;
-        uint8_t   doorState;			// 1: alles zu  200: tuer offen + bit1(S) +bit2(CB) + bit3(CB)
-        uint8_t	doorWasOpened;		// 1: all doors are closed   200: any door was just opened
-        uint8_t	changer;			// can only be tested by usage
 
-        uint8_t   coinBlocker;		// can only be tested by usage
-        uint8_t   billReader;			// can only be tested by usage
+        uint8_t   doorState;			// 1: alles zu  200: tuer offen + bit1(S) +bit2(CB) + bit3(CB)
+        uint8_t	doorWasOpened;          // 1: all doors are closed   200: any door was just opened
+        uint8_t	changer;
+        uint8_t   coinBlocker;
+
+        uint8_t   billReader;
         uint8_t   ResetReason;
         uint8_t	allModulesChecked;
-
         uint8_t   alarmState;
+
+        uint8_t   fuses;
         uint8_t   res11;
         uint8_t   res12;
         uint8_t   res13;
-// 31
+        // 32
+
+        uint8_t     padd00;
+        uint8_t     padd01;
+        uint8_t     padd02;
+        uint8_t     padd03;
+        //36
+        uint32_t   padd04;
+        uint32_t   padd05;
+        uint32_t   padd06;
+        uint32_t   padd07;
+        // 52
+        uint32_t   padd08;
+        uint32_t   padd09;
+        uint32_t   padd10;
+        // 64
 };
 
+
 struct T_dynamicCondition
 {
         char allDoorsDebounced;
@@ -228,16 +245,17 @@ struct T_dynamicCondition
         char upperDoor;         // 99: undefined  0:closed  1:open
         char middleDoor;		// 99: undefined  0:closed  1:open
         char lowerDoor;         // 99: undefined  0:closed  1:open
-        char reserve;
+        char coinAttached;
         char billBox;
         char modeAbrech;
         char onAlarm;           // 0:alarm aus  1:alarm  2:alarm mit Sirene   3: Sirenentest
+        // 10
         char nowCardTest;
         char nowPayment;        // not used, always 0
         char lastMifCardType;
         uint8_t lastSDoorState;
         uint8_t lastVDoorState;
-        uint8_t lastCBstate;
+        uint8_t lastCBstate;        // =0, not used
         char        paymentInProgress;
         // Version Szeged:  aug2023
         //	0: stopped by timeout
@@ -266,6 +284,7 @@ struct T_dynamicCondition
 
         char        res1;
         uint16_t    U_Batt;
+        // 20
         uint16_t	Temperatur;
         uint16_t	nrCoinsInBox;
         uint32_t	amountInBox;
@@ -275,11 +294,14 @@ struct T_dynamicCondition
         char        jsonValid_device;
         char        jsonValid_cash;
         char        jsonValid_print;
+        // 40
         char        jsonValid_serial;
         char        jsonValid_time;
         char        lastFileType;
-// 44
+
         uint8_t     MifCardHolder[8];
+        // 51
+
         uint8_t     resultOfLastTemplPrint;
                     // 0: unknown or printing in progress
                     // 1: OK, doc was printed   2: error, doc was not printed
@@ -290,9 +312,36 @@ struct T_dynamicCondition
                     //          bit4: paper jam in cutter
                     //          bit6: no response             bit7: serial rec. error
                     //			bit5: printer not ready
-        uint8_t     startupTestIsRunning;
+        uint8_t     startupTestIsRunning;   // =0, not used
+        uint16_t    empty;                   // neu 3.7.24, dieser Platz wird vom Compiler im Ram
+                                            // freigehalten weil naechster Wert ein Long ist
+        // 56
+        // new since 7.5.24
+        uint32_t   totalNrOfCuts;
+        uint16_t   nextAccountNumber;
+        uint16_t   nrOfBillsInBox;
+  //uint16_t   padd07;            // raus am 3.7.24
+         // 64
+
+        // rest comes with new cmd:
+        uint32_t    amountInBillbox;
+        uint16_t    UbatAtLastPrint;
+        uint16_t    pad01;
+        uint32_t    reserve01;
+        uint32_t    reserve02;
+        uint32_t    reserve03;
+        uint32_t    reserve04;
+        uint32_t    reserve05;
+        uint32_t    reserve06;
+        uint32_t    reserve07;
+        uint32_t    reserve08;
+        uint32_t    reserve09;
+        uint32_t    reserve10;
+        uint32_t    reserve11;
+        uint32_t    reserve12;
+        uint32_t    reserve13;
+        uint32_t    reserve14;
 
-        //54
 };
 
 struct T_extTime
@@ -329,6 +378,7 @@ struct T_extTime
 typedef uint8_t UCHAR;
 typedef uint16_t UINT;
 
+// ATTENTION: struct length must be 64 exactly!!!
 struct T_devices
 {
     // set by master, used(1) or notused (0) or type 2....20
@@ -337,7 +387,6 @@ struct T_devices
     UCHAR	kindOfCoinChecker;		// 0: without  1=EMP820   2=EMP900    3=currenza Csquare  (MW)
     UCHAR	kindOfMifareReader;		// by now only stronglink SL025 =1
     UCHAR   solarPower;             // 1:sleep allowed   0: no sleep
-    //UCHAR   suppressSleepMode;	// 0:sleep allowed   1: no sleep
 
     UCHAR	kindOfModem;			// 0:off    1:Sunlink
     UCHAR	kindOfCreditcard;		// 0:off    1:Feig NFC
@@ -346,6 +395,7 @@ struct T_devices
 
     UCHAR	CoinShutter;
     UCHAR	BillAcceptor;
+    // 10
     UCHAR	usevaultLock;
     UCHAR	autoAlarm;				// 1: switch on siren for 1min in doors opened unauthorized
 
@@ -356,9 +406,28 @@ struct T_devices
 
     UINT	VaultFullWarnLevel;
     UINT	VaultFullErrorLevel;
+    // 20
     UINT    BattEmptyWarnLevel;
     UINT    BattEmptyErrorLevel;
 
+    UCHAR   useForeignCharacters;
+    UCHAR   printRefundReceipt;
+    UINT	BillFullWarnLevel;
+    UINT	BillFullErrorLevel;
+
+    UCHAR   housing;
+    UCHAR   resUc1;
+    // 32
+    uint32_t     padd01;
+    uint32_t     padd02;
+    uint32_t     padd03;
+    uint32_t     padd04;
+    uint32_t     padd05;
+    uint32_t     padd06;
+    uint32_t     padd07;
+    uint32_t     padd08;
+    // 64
+
 };
 
 struct T_chg_Tub
@@ -390,6 +459,8 @@ struct T_changer
     uint8_t paymentRunning;	// 1: coins are accepted
     uint16_t denomination[16];
     uint16_t availableTubes; //bitwise 0,1 1=av. bit0 = lowest coin value
+    uint16_t pad;
+    // 64byte
 };
 
 struct T_bna
@@ -398,19 +469,29 @@ struct T_bna
     uint8_t setup;			// 0: not  1: got valid parameters from device
     uint8_t	FeatureLevel;
     uint16_t countryCode;		// programmed in EMP
+
     uint16_t scalingFactor;				// z.B. 5
     uint8_t	decimalPlace;
     uint8_t pad1;
+
     uint16_t stackerCap;
     uint16_t billSecureLevel;
+// 12
     uint8_t	hasEscrow;
     uint8_t accBillTypes[16];             // programmed in EMP  z.B. (bit 0..7): 1 2 4 10 20 40 0 0
     uint16_t currentStackerLevel;        // requested number of notes in billbox
-
+// 31
     // settings from Master
     uint16_t intendedAccept;    // bit 0 =5€
     uint16_t pad2;
-    uint16_t billDenomination[16];
+ // 35
+    uint16_t billDenomination[8];
+// 51
+    uint8_t  pad3;
+    uint32_t pad4;
+    uint32_t pad5;
+    uint32_t pad6;
+    // 8.5.24 reduced, 3 bytes too much.
 
 };
 
@@ -1252,16 +1333,17 @@ public:
 
     // read printer condition and settings
 
-    virtual uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const {
+    virtual uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const
+    {
         Q_UNUSED(prn_hw_state);
         return 0;
     }
-        // retval: status byte
-            // byte 0 = 0: prnter OK,  >0: error
-            // bit0: paper low  1: no paper    2: temperature error
-            // 3: head open     4: paper jam in cutter
-            // 6: no response   7: bad response from printer
-        // and return struct "Tprn_hw_state"
+    // return value:  =prn_hw_state[0]
+    //       0:unknown   1: printer OK     100: printer OK but paper near end
+    //       200: not connected      201: printer on error     202: no paper
+
+
+
 
     virtual bool prn_isUpAndReady(void) const {
         return false;
@@ -2299,6 +2381,9 @@ public:
     // countOfBills: array of up to 16 sums,    countOfBills[0]=nr of 5€-bills in stacker
     //                                          countOfBills[1] for 10€   and so on
 
+    virtual bool cash_isCollectionStarted(void) const {return false;}
+        // return true is coin collection in DC is running
+
 
     // download device controller
     virtual bool dcDownloadRequest(QString const &fileToDownload) const {
@@ -2350,6 +2435,40 @@ public:
 
     virtual QObject const *getAPI() { return nullptr; }
 
+    virtual void mod_switchResetline()  { }
+
+
+    // direct ticket printing
+    // new from 22.5.2024, print Json-Printer-Template which
+    // is stored locally here in PTU memory,
+    // rather then loading several jsons to DC and tell it to print (until now)
+    // the local printer-json can have any length using predefined commands
+    // printing a local printer-json happens like this:
+    // 1) select a file to be printed from memory
+    // 2) load, parse, translate and save the file with following function
+    // 3) set dynamics (values from current transaction)
+    // 4) send saved file to printer one or several times
+    // hint: dynamics can be changed at any time without reloading the ticket, just repeat 3) and 4)
+
+    virtual void prn_translateLocalPrinterJson(QByteArray jsonFile2print) const
+    { Q_UNUSED(jsonFile2print) }
+    // load, parse, translate and save the file
+
+    virtual void prnStoreDynamics(char *bufferDynPrintVars[], uint8_t nrOfDyns) const
+    { Q_UNUSED(bufferDynPrintVars);  Q_UNUSED(nrOfDyns) }
+        // store nrOfDyns (up to 16) dynamics before printing
+        // max length = 16 byte per dynamic
+        // 16 strings with up to 16bytes each
+
+    virtual void prn_printTranslatedTicket(void) const { }
+
+    virtual uint8_t prn_waitForDirectTicket(void) const { return 0; }
+    // return:  0: just printing, wait
+    //          1: OK - last print was succesful
+    //          2: error - not printed
+    //              2: printer error  3: no connection to DC
+
+
 
 signals:
     /*
@@ -2392,31 +2511,7 @@ signals:
 
     virtual void hwapi_coinAttached() const = 0;
 
-    // NOTE: declaring a "pure virtual" "signal" should be an error and thus not valid.
-    /* GH Version, bringt Fehler
-    void hwapi_templatePrintFinished_OK() const;
-    void hwapi_templatePrintFinished_Err() const;
 
-    void hwapi_coinCollectionJustStarted() const;
-    void hwapi_coinCollectionAborted() const;
-
-    void hwapi_gotNewCoin() const;
-    void hwapi_payStopByMax() const;
-    void hwapi_payStopByPushbutton() const;
-
-    void hwapi_payStopByEscrow() const;
-    void hwapi_payStopByError() const;
-    void hwapi_payStopByTimeout() const;
-    void hwapi_payCancelled() const;
-    void hwapi_coinProcessJustStopped() const;
-
-    void hwapi_doorServiceDoorOpened() const;
-    void hwapi_doorVaultDoorOpened() const;
-    void hwapi_doorCoinBoxRemoved() const;
-    void hwapi_doorCoinBoxInserted() const;
-    void hwapi_doorCBinAndAllDoorsClosed() const;
-    void hwapi_doorAllDoorsClosed() const;
-    */
 };
 
 
@@ -2479,9 +2574,21 @@ signals:
 
 // hier dazwischen: Umstellung ALLER Prototypen
 //  hier von =0 auf {} durch Gerhard
-
-#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/5.2"
+//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/5.2"
     // 7.11.2023: bna functions activated
+//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/5.3"
+    // 14.3.24:new function bool hwapi::cash_isCollectionStarted(void) const
+    // padding three struct to 64 byte to avoid stack overflow when using
+    // signal coin attached is much faster now
+
+//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/5.4"
+    // 7.may.2024, matches to DC V6, some structs extended
+    // new function: modem reset, dyn. data come with two commands now
+    // released 17.may.2024
+
+#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/5.5"
+    // started at 21.5.24, integration of ticket interpreter
+    // see change log in hwapi.h
 
 
 Q_DECLARE_INTERFACE(hwinf, HWINF_iid)

include/prot.h

@@ -1,7 +1,7 @@
 
 #ifndef SERIAL_FRAME_H
 #define SERIAL_FRAME_H
-#include <QMainWindow>
+#include <QObject>
 #include <QString>
 #include <QTimer>
 #include "tslib.h"
@@ -43,7 +43,7 @@
 #define     STARTSIGN_RECEIVE_LONG          0x5D
 
 
-class T_prot : public QMainWindow
+class T_prot : public QObject
 {
     Q_OBJECT
 
@@ -122,6 +122,9 @@ public:
                            uint8_t  *RdDlen, uint8_t *receivedData);
         // retval: data valid, only one time true
 
+    uint16_t getReadSource() { return readSource; } // readSource contains last command sent to device controller
+    T_com *getSerialPort() { return mySerialPort; } // utility function
+
 
 signals:
     void framerecieved();   //bool gotINdata);

include/runProc.h

@@ -3,7 +3,7 @@
 #define RUN_PROCESS_H
 
 #include <stdint.h>
-#include <QMainWindow>
+#include <QObject>
 #include <QString>
 #include <QTimer>
 #include "tslib.h"
@@ -23,7 +23,6 @@
 #include "shared_mem_buffer.h"
 
 
-
 class T_runProc : public QObject
 {
     Q_OBJECT
@@ -36,6 +35,16 @@ class T_runProc : public QObject
 
     void restoreDeviceParameter(struct T_devices *deviceSettings);
 
+    void clearPrnFile(void);
+    char subFeedPaper(char *valueStr);
+    bool subGetVariStr(char *valueStr, char *returnStr);
+    //void subAppendNxtTxt(char *textLine);
+    void sub_changeStyle(char *valueStr);
+    void subPrintGrafics(char *valueStr);
+    char prn_directTicket_cycle(void);
+    void runProc_subPerformPrintCmds(uint8_t nextCmd, uint8_t nextPara);
+    uint16_t subStoreTicketText(char *textLine);
+
 #ifndef THIS_IS_CA_MASTER
     std::atomic_bool m_coinAttached{false};
 #endif
@@ -53,6 +62,9 @@ public:
     uint8_t epi_restore64BdevParameter(uint8_t *length, uint8_t *buf);
     bool doors_supervise(void);
     uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state);
+        // byte 0: 0:unknown   1: printer OK     100: printer OK but paper near end
+        //          200: not connected    201: printer on error   202: no paper
+
     void bl_completeStart(void);
     void dc_autoRequest(bool on);
     void bl_rebootDC(void);
@@ -60,6 +72,48 @@ public:
     void bl_checkBL(void);
     bool bl_isUp(void);
 
+    // new from 21.5.24 ..................................................................
+
+    uint16_t sys_getCustomerNumber(void);
+    uint16_t sys_getMachineNumber(void);
+    uint16_t sys_getBoroughNumber(void);
+    uint16_t sys_getZoneNumber(void);
+    uint16_t sys_getMachineAlias(void);
+    void sys_getLocation(char *locStr);
+    void prn_sendText(QByteArray *buf);
+    void prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3);
+    void prn_printBarcode(uint8_t kindOf, uint8_t withText,  uint8_t offset, uint8_t rotation, uint8_t dataLeng, uint8_t *data);
+    bool sys_parseFile(QByteArray jsonFile2print);
+        // and copy all keys and values to arrays
+
+    bool sys_translateKeys(void);
+
+    bool sys_interpretPrnCmds(void);
+
+
+    void prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density,  uint8_t alignment, uint8_t orientation);
+        // send 5 byte: byte 0,1: speed  5...250 mm/s
+        //              byte2: density   0....(25)....50
+        //              byte3: alignment    'l', 'c', 'r' = left, center, right
+        //              byte4: orientation  0, 90, 180    = 0°, 90°, 180° rotation (by now not supported!)
+
+    void prnStoreDynamics(char *bufferDynPrintVars[], uint8_t nrOfDyns);
+        // store nrOfDyns (up to 16) dynamics before printing
+        // max length = 16 byte per dynamic
+
+    bool prnRestoreDynamic(uint8_t nrOfDyn, char *bufferOneDyn);
+        // nrOfDyn = 0...15
+        // buffer bufferOneDyn[16] needs length of at least 16 byte
+
+    bool prn_isUpAndReady(void);
+
+    void prnStartDirectPrinting(void);
+
+    uint8_t prn_getDirectPrintResult(void);
+    // return:  0: just printing, wait
+    //          1: OK - last print was succesful
+    //          2: error - not printed
+    //              2: printer error  3: no connection to DC
 
 signals:
     //void runProc_templatePrintFinished_OK(void) const override;

include/sendWRcmd.h

@@ -14,6 +14,8 @@ uint8_t sendWRcmd_getSendBlock160(uint8_t *leng, uint8_t *buf);
 
 void sendWRcmd_INI(void);
 
+uint8_t sendWRcmd_getStackSize(void);
+
 // #define     FDCMD_STACKDEPTH    16 / 32
 // short and long commands are queued into the same stack to guaranty right order
 void sendFDcmd_clrStack(void);

include/shared_mem_buffer.h

@@ -230,6 +230,9 @@ struct SharedMem
     uint8_t  store_bnaCollect[8];
     uint8_t  store_bnaContent[64];
 
+    // new, 8.5.24
+    uint8_t store_machCon2len;
+    uint8_t store_machCon2[66];
 
 
 
@@ -242,7 +245,7 @@ struct SharedMem
     // ------------------ Data OUTPUT --------------------------------
 
     // sendWRcmd.cpp
-    #define CMDSTACKDEPTH   16
+    #define CMDSTACKDEPTH   32
     uint16_t nextAsynchsendCmd0[CMDSTACKDEPTH];
     uint8_t  nrOfCmdsInQueue;
 

include/storeINdata.h

@@ -529,7 +529,7 @@ bool epi_areDcDataValid();
 
 void epi_setDcDataValid(void);
 
-void epi_resetDcDataValid(void);
+void epi_resetDcDataValid(char reason);
 
 
 void epi_clearDynData(void);
@@ -626,6 +626,12 @@ void epi_restoreBnaContent(uint8_t  *data);
 
 
 
+void epi_clearDynMachCond2(void);
+
+void gpi_storeDynMachCond2(uint8_t leng, uint8_t *data);
+
+void epi_restoreDynMachCond2(uint8_t *leng, uint8_t *data);
+
 
 
 

include/tslib.h

@@ -1,7 +1,7 @@
 #ifndef TSLIB_H
 #define TSLIB_H
 #include <QByteArray>
-
+#include "stdint.h"
 
 #define LOWBYTE     false
 #define HIGHBYTE    true
@@ -87,6 +87,37 @@ void biox_CopyBlock(uint8_t *src, uint16_t srcPos, uint8_t *dest, uint16_t destP
 
 bool tslib_strComp(uint8_t *buf, char *compStr);
 
+
+
+
+
+
+uint16_t tslib_StrLen(char *str);
+
+
+
+void tslib_itoa(int n, char *str);
+    // -23456 -> str[0]='-'   str[1]='2' ...[5]='6' str[6]=0
+    // 5      -> str[0]='5'   str[1..6]=0
+
+void tslib_uitoa(unsigned int n, char *str);
+
+void tslib_ltoa(long n, char *str);
+    // -2147483647 -> str[0]='-'   str[1]='2' ...[10]='6' str[11]=0
+
+void tslib_ultoa( long n, char *str);
+    // 0... ->4294967296   str[0]='4'   str[1]='2' ...[9]='6' str[10]=0   str[11]=0
+
+void tslib_uitobin( int  decval, char *str);
+
+long tslib_atol( char *AscString);
+    // change ascii string ( of ascii numbers '0'..'9') to number
+    // AscString must be 0-terminated!
+    // a leading '-' is ignored, a'.' or a ',' stops calculation
+
+
+
+
 #endif // TSLIB_H
 
 

lib_ca_master/lib_ca_master.pro

@@ -41,3 +41,6 @@ unix {
     system("mkdir -p $${DESTDIR}")
     system("cp ../include/interfaces.h $${DESTDIR}")
 }
+
+DISTFILES += \
+    ../include/dump.txt

src/com.cpp

@@ -1,5 +1,6 @@
 #include "com.h"
 #include <QDebug>
+#include <QDateTime>
 //#include "controlBus.h"
 
 //////////////////////////////////////////////////////////////////////////////////
@@ -20,13 +21,48 @@ void T_com::writeToSerial(const QByteArray &data, uint16_t sendLength)
 {
     sendBuffer=data;
     sendLen=sendLength;
-    if (CatSerial->isOpen())
-    {
-        //qDebug() << "sending..." << sendBuffer;
-        CatSerial->write(sendBuffer);
-    } else
-        qDebug() << "error sending, port is not open";
 
+    // logic: exactly one command is sent to DC. no other command can be sent
+    // until the respond has been read from the serial line.
+
+    if (CatSerial->isOpen()) {
+        if (CatSerial->error() != QSerialPort::NoError) {
+            qCritical() << __func__ << "" << __LINE__ << "ERROR on serial line" << CatSerial->errorString();
+            CatSerial->clearError();
+            qCritical() << __func__ << "" << __LINE__ << "cleared error on serial line";
+        }
+
+        if (!CatSerial->atEnd()) {
+            qCritical() << QString("ERROR %1 bytes available on serial line before write").arg(CatSerial->bytesAvailable());
+            qCritical() << CatSerial->readAll().toHex(':');
+            CatSerial->clear();
+            qCritical() << __func__ << "" << __LINE__ << "read all data from serial line";
+        }
+
+        CatSerial->clear();
+
+        QByteArray buffer(data);
+        int bytesWritten = CatSerial->write(buffer);
+        if (bytesWritten == -1) {
+            qCritical() << __func__ << ":" << __LINE__
+                        << QString("ERROR %1 for sending %2").arg(CatSerial->errorString()).arg(data.toHex(':').constData());
+            CatSerial->clearError();
+            qCritical() << __func__ << ":" << __LINE__ << "cleared error on serial line. returning ...";
+            return;
+        }
+
+        CatSerial->flush();
+        writeCount += 1;
+
+        // only for debugging
+        // if ((unsigned int)data.constData()[2] == 31) { // request dynamic data
+        //    qCritical() << __func__ << ":" << __LINE__ << QDateTime::currentDateTime().time().toString(Qt::ISODateWithMs)
+        //                << "write cmd" << (unsigned int)data.constData()[2];
+        //}
+    } else {
+        qCritical() << __func__ << ":" << __LINE__
+                    << "ERROR sending" << data.toHex(':') << "port is not open";
+    }
 }
 
 
@@ -82,6 +118,7 @@ T_com::T_com(QObject *parent) : QObject(parent)
     ChkConnectTimer->setSingleShot(false);
     ChkConnectTimer->start(100);     // in ms
     com_want2read=0;
+    writeCount = 0;
 }
 
 

src/datIf.cpp

@@ -6,10 +6,12 @@ History:
 
 */
 #include "datIf.h"
+#include "hwapi.h"
 #include "sendWRcmd.h"
 #include "controlBus.h"
 #include "storeINdata.h"
 #include <QDebug>
+#include <QDateTime>
 #include <datei.h>
 #include <QDir>
 
@@ -88,9 +90,11 @@ T_datif::T_datif(QObject *parent) : QObject(parent)
     dif_scanStep=0;
     selectedSlaveAddr=FIX_SLAVE_ADDR;
     cycl_running=0;
-    epi_resetDcDataValid();        // data are not yet valid, no response from DC by now
+    epi_resetDcDataValid(1);        // data are not yet valid, no response from DC by now
 
     datif_noResponseCtr=0;
+    datif_nowNewDyns=0;
+    datif_nowNewStats=0;
 
     datif_repeatCtr=0;
     datif_cmdWasPerformed=0;    // 0: no response by now
@@ -122,6 +126,7 @@ T_datif::T_datif(QObject *parent) : QObject(parent)
     datif_pNextCmd=0;
     datif_sendSlowCmd=0;
 
+    readCount = 0;
 }
 
 void T_datif::resetChain(void)
@@ -129,6 +134,11 @@ void T_datif::resetChain(void)
    dif_scanStep=0;
 }
 
+#define     RESPONSEWAITTIME    10
+    // ab 5 keine timeouts mehr
+#define     GOTRESP_SENDGAP     20
+    // Wert egal, muss nur > RESPONSEWAITTIME und <255 sein
+
 char T_datif::datif_cycleSend()
 {
     // cyclic transmission of INPUT-Requests
@@ -145,14 +155,25 @@ char T_datif::datif_cycleSend()
     if ( !myDCIF->isPortOpen())
     {
         //qDebug()  << "com port not available";    // wird ununterbrochen ausgegeben
-        epi_resetDcDataValid();    // DC data not valid
+        epi_resetDcDataValid(2);    // DC data not valid
+        datif_nowNewDyns=0;
+        datif_nowNewStats=0;
+
         return 0;
     }
 
     // supervise if DC data are valid
     datif_noResponseCtr++;         // inc every 20ms
-    if (datif_noResponseCtr>250)   // no life sign from device controller (DC) for about 3s
-        epi_resetDcDataValid();    // DC data has not updated for >=5s -> no longer valid!
+    if (datif_noResponseCtr>50)   // no life sign from device controller (DC) for about a sec
+     {
+        epi_resetDcDataValid(3);    // DC data has not updated for >=5s -> no longer valid!
+        datif_nowNewDyns=0;
+        datif_nowNewStats=0;
+
+    }
+    // 24.7.24 new, data are valid if dynamic machine conditions AND dyn machine states came in
+    if (datif_nowNewDyns && datif_nowNewStats && !epi_areDcDataValid() )
+        epi_setDcDataValid();
 
     // Ueberwachung ob ein oder mehrere Commands am Stueck erfolgreich waren
     if (gpi_wantToResetSupervision())
@@ -171,8 +192,7 @@ char T_datif::datif_cycleSend()
     // c) gar keine Antwort, Timeout nach 100ms -> 2x wiederholen (nach einer Luecke von 10ms )
     // cycl_running=0: nichts zu tun    1: Mitteilung: Kommando wurde soeben abgesendet, 2,3,4 = Wiederholung
 
-    if (cycl_running)   // 21.9.23 doRepeat hier raus sonst gehts warten auch nicht mehr (BL)
-     //   if (cycl_running && doRepeat)
+    if (cycl_running)
     {
         // request is still running, wait for response before next sending
         //qDebug()<< "datif wait for response";
@@ -180,28 +200,35 @@ char T_datif::datif_cycleSend()
         datif_trigger->start(20);   // ruft "this" (datif_cycleSend) erneut in 20ms auf
                 // mit 10 kein Unterscheid weil Zykluszeit grösser
 
-        cycl_running++;     // inc every 20...30ms  // warte max 100ms auf Antwort
-        if (cycl_running >80 && cycl_running <95)   // neu 13.9.23     mind. 40 damit Templates
-                                                                    // in Folge gedruckt werden koennen
-                                                    // 95: muss nur kleiner sein als die 100 fuer die Luecke
-                                                    // 17.10.23:  50--> 80
+        cycl_running++;     // inc every 20ms, warte auf Antwort
+
+        if (cycl_running >= GOTRESP_SENDGAP)
         {
-            // 100ms vergangen, bisher keine Antwort, also Kommando wiederholen
-            qDebug()<< "datif timeout no response for wr/rd cmd "<< keepLastWrCmd << " " << keepLastRdCmd;            
+            // got response, wait just one (this) cycle before next sending
+            cycl_running=0;
+            return 0;
+        }
+
+
+        if (cycl_running >=RESPONSEWAITTIME )
+        {
+            // bisher keine Antwort, also Kommando wiederholen
+            qDebug()<< "datif timeout no response for wr/rd cmd "<< keepLastWrCmd << " " << keepLastRdCmd;
             cycl_running = 0;       // gleich wiederholen weil ja schon ewig nichts mehr reinkam
             datif_cmdWasPerformed=2;    //  NO :((
             gpi_storeLastResult(8);
-
+            return 0;
         }
-
-        if (cycl_running>=101)    // 100 + 1
+/*
+ * Unsinn, wird nie durchlaufen
+        if (cycl_running>=(RESPONSEWAITTIME+6))  // 3.7.24: 101-->110
         {
             // Antwort ist gekommen, also nach kurzer Luecke naechstes (datif_cmdWasPerformed==1)
             //      oder nochmal gleiches (datif_cmdWasPerformed==2) Kommando senden
             //qDebug()<< "datif got any response";
             cycl_running=0;            
         }
-
+*/
         // hier stoppen, weil Antwort des letzten Cmds noch nicht da
         return 0;
     }
@@ -223,6 +250,7 @@ char T_datif::datif_cycleSend()
             datif_kindOfCmd=0;
             cycl_running=0;
             gpi_storeOverallResult(2);
+            qCritical()<<"datif, error no response to wr/rd "<<keepLastWrCmd<<" "<<keepLastRdCmd;
             return 0;
         }
 
@@ -249,7 +277,7 @@ char T_datif::datif_cycleSend()
             datif_cmdWasPerformed=0;
         } else
         {
-            qDebug()  << "datif: unknown cmd, stop repeating wr/rd:" << keepLastWrCmd << " " << keepLastRdCmd;
+            qCritical()  << "datif: unknown cmd, stop repeating wr/rd:" << keepLastWrCmd << " " << keepLastRdCmd;
             datif_cmdWasPerformed=0;
             cycl_running=0;
             datif_kindOfCmd=0;
@@ -280,8 +308,10 @@ char T_datif::datif_cycleSend()
             myDCIF->setUserReadData(nextRdCmd);
             myDCIF->sendUserData(selectedSlaveAddr);
 
-            //qDebug()<<"Datif send long FD cmd (wr/rd): "<<nextWrCmd<< " / " << nextRdCmd
-            //        << " " << data[0]<< " " << data[1]<< " " << data[2]<< " " << data[3];
+   qDebug()<<"Datif send long FD cmd (wr/rd): "<<nextWrCmd<< " / " << nextRdCmd << "Dlen:" << length;
+    //      << "    data:" << data[0]<< " " << data[1]<< " " << data[2]<< " " << data[3]
+   //       << " " << data[4]<< " " << data[5]<< " " << data[6]<< " " << data[7]
+    //      << " " << data[8]<< " " << data[9]<< " " << data[10]<< " " << data[11];
 
             cycl_running=1;     // 1: start transmission
             datif_kindOfCmd=2;
@@ -308,8 +338,8 @@ char T_datif::datif_cycleSend()
             myDCIF->setUserReadData(nextRdCmd);
             myDCIF->sendUserData(selectedSlaveAddr);
 
-            //qDebug()<<"Datif send short FD cmd (wr/rd): "<<nextWrCmd<< " / " << nextRdCmd << "   "
-            //        << blockNum << " " << dat1 << " " << dat2<< " " << dat3<< " " << dat4;
+   qDebug()<<"Datif send short FD cmd (wr/rd): "<<nextWrCmd<< " / " << nextRdCmd << "   ";
+   //        << blockNum << " " << dat1 << " " << dat2<< " " << dat3<< " " << dat4;
 
             cycl_running=1;     // 1: start transmission
             datif_kindOfCmd=1;
@@ -345,7 +375,10 @@ char T_datif::datif_cycleSend()
     else
     {
         dif_scanStep=0;         // always start from beginning
-        epi_resetDcDataValid();
+        epi_resetDcDataValid(4);
+        datif_nowNewDyns=0;
+        datif_nowNewStats=0;
+
     }
 
     datif_cmdWasPerformed=0;    // 0: no response by now
@@ -363,14 +396,14 @@ char T_datif::sendINrequestsAutomatic(void)
     //                                       114,0,0,0,0,0,0,0,0,0};
 
     // extension 6.12.23, complete list:
-    uint8_t datif_autoRequCommandList[40]={11, 12, 13, 14, 17, 18, 19, 21, 22, 23,
-                                           24, 25, 27, 30, 31, 32, 33, 35, 39, 40,
+    uint8_t datif_autoRequCommandList[40]={11, 12, 14, 17, 18, 19, 21, 22, 23, 24,
+                                           25, 27, 30, 31, 32, 33, 34, 35, 39, 40,
                                            41, 42, 102,103,104,106,107,108,109,110,
-                                           112,113,114,115,116,0,  0,  0,  0,  0};
+                                           112,113,114,115,116,0,  0,  0, 0,  0};
     uint8_t datif_maxNrCommands=35, datif_sendNow;
 
     // send quicker while transaction is ongoing:
-    uint8_t datif_vendRequCommandList[15]={102,107,108,110,112,115,116,31,32,40,41,42,23,0,0};
+    uint8_t datif_vendRequCommandList[15]={102,107,108,110,112,115,116,30,31,32,40,41,42,23,0};
     uint8_t datif_maxVendingCmds=13;
 
     // special commands:
@@ -380,7 +413,8 @@ char T_datif::sendINrequestsAutomatic(void)
     // 19:  get time and date and Extra values. poll occasionally and if needed
     // 107, 22: MDB: poll if needed
 
-    doRepeat=true;  // 20.9.23 15uhr (after release)
+    //doRepeat=true;  // 20.9.23 15uhr (after release)
+    doRepeat=false; // 3.7.24 off, is repeated cyclic anyway
 
     if (gpi_getNowCoinPay())
     {
@@ -449,6 +483,76 @@ void T_datif::StoredRecData()
     gpi_storeLastResult(res);
 }
 
+static void dump(T_moduleCondition const *modCond) {
+    qCritical() << QString("modCond->ram                %1 (%2)").arg(modCond->ram).arg(modCond->ram, 0, 16);
+    qCritical() << QString("modCond->intEe              %1 (%2)").arg(modCond->intEe).arg(modCond->intEe, 0, 16);
+    qCritical() << QString("modCond->extEe              %1 (%2)").arg(modCond->extEe).arg(modCond->extEe, 0, 16);
+    qCritical() << QString("modCond->rtc                %1 (%2)").arg(modCond->rtc).arg(modCond->rtc, 0, 16);
+    qCritical() << QString("modCond->boardHw            %1 (%2)").arg(modCond->boardHw).arg(modCond->boardHw, 0, 16);
+    qCritical() << QString("modCond->printer            %1 (%2)").arg(modCond->printer).arg(modCond->printer, 0, 16);
+    qCritical() << QString("modCond->modem              %1 (%2)").arg(modCond->modem).arg(modCond->modem, 0, 16);
+    qCritical() << QString("modCond->signal             %1 (%2)").arg(modCond->signal).arg(modCond->signal, 0, 16);
+
+    qCritical() << QString("modCond->regist             %1 (%2)").arg(modCond->regist).arg(modCond->regist, 0, 16);
+    qCritical() << QString("modCond->mdbBus             %1 (%2)").arg(modCond->mdbBus).arg(modCond->mdbBus, 0, 16);
+    qCritical() << QString("modCond->coinChecker        %1 (%2)").arg(modCond->coinChecker).arg(modCond->coinChecker, 0, 16);
+    qCritical() << QString("modCond->coinEscrow         %1 (%2)").arg(modCond->coinEscrow).arg(modCond->coinEscrow, 0, 16);
+
+    qCritical() << QString("modCond->mifareReader       %1 (%2)").arg(modCond->mifareReader).arg(modCond->mifareReader, 0, 16);
+    qCritical() << QString("modCond->creditTerm         %1 (%2)").arg(modCond->creditTerm).arg(modCond->creditTerm, 0, 16);
+    qCritical() << QString("modCond->coinReject         %1 (%2)").arg(modCond->coinReject).arg(modCond->coinReject, 0, 16);
+    qCritical() << QString("modCond->coinSafe           %1 (%2)").arg(modCond->coinSafe).arg(modCond->coinSafe, 0, 16);
+
+    qCritical() << QString("modCond->billSafe           %1 (%2)").arg(modCond->billSafe).arg(modCond->billSafe, 0, 16);
+    qCritical() << QString("modCond->voltage            %1 (%2)").arg(modCond->voltage).arg(modCond->voltage, 0, 16);
+    qCritical() << QString("modCond->temper             %1 (%2)").arg(modCond->temper).arg(modCond->temper, 0, 16);
+    qCritical() << QString("modCond->poweronTest        %1 (%2)").arg(modCond->poweronTest).arg(modCond->poweronTest, 0, 16);
+
+    qCritical() << QString("modCond->doorState          %1 (%2)").arg(modCond->doorState).arg(modCond->doorState, 0, 16);
+    qCritical() << QString("modCond->doorWasOpened      %1 (%2)").arg(modCond->doorWasOpened).arg(modCond->doorWasOpened, 0, 16);
+    qCritical() << QString("modCond->changer            %1 (%2)").arg(modCond->changer).arg(modCond->changer, 0, 16);
+    qCritical() << QString("modCond->coinBlocker        %1 (%2)").arg(modCond->coinBlocker).arg(modCond->coinBlocker, 0, 16);
+
+    qCritical() << QString("modCond->billReader         %1 (%2)").arg(modCond->billReader).arg(modCond->billReader, 0, 16);
+    qCritical() << QString("modCond->ResetReason        %1 (%2)").arg(modCond->ResetReason).arg(modCond->ResetReason, 0, 16);
+    qCritical() << QString("modCond->allModulesChecked  %1 (%2)").arg(modCond->allModulesChecked).arg(modCond->allModulesChecked, 0, 16);
+    qCritical() << QString("modCond->alarmState         %1 (%2)").arg(modCond->alarmState).arg(modCond->alarmState, 0, 16);
+    qCritical() << QString("modCond->fuses              %1 (%2)").arg(modCond->fuses).arg(modCond->fuses, 0, 16);
+}
+
+static void dump(T_dynamicCondition const *dynCond) {
+    qCritical() << QString("dynCond->allDoorsDebounced      %1 (%2)").arg((unsigned char)dynCond->allDoorsDebounced).arg((unsigned char)dynCond->allDoorsDebounced, 0, 16);
+    qCritical() << QString("dynCond->openedAuthorized       %1 (%2)").arg((unsigned char)dynCond->openedAuthorized).arg((unsigned char)dynCond->openedAuthorized, 0, 16);
+    qCritical() << QString("dynCond->CBinDebounced          %1 (%2)").arg((unsigned char)dynCond->CBinDebounced).arg((unsigned char)dynCond->CBinDebounced, 0, 16);
+    qCritical() << QString("dynCond->upperDoor              %1 (%2)").arg((unsigned char)dynCond->upperDoor).arg((unsigned char)dynCond->upperDoor, 0, 16);
+    qCritical() << QString("dynCond->middleDoor             %1 (%2)").arg((unsigned char)dynCond->middleDoor).arg((unsigned char)dynCond->middleDoor, 0, 16);
+    qCritical() << QString("dynCond->lowerDoor              %1 (%2)").arg((unsigned char)dynCond->lowerDoor).arg((unsigned char)dynCond->lowerDoor, 0, 16);
+    qCritical() << QString("dynCond->middleDoor             %1 (%2)").arg((unsigned char)dynCond->middleDoor).arg((unsigned char)dynCond->middleDoor, 0, 16);
+    qCritical() << QString("dynCond->coinAttached           %1 (%2)").arg((unsigned char)dynCond->coinAttached).arg((unsigned char)dynCond->coinAttached, 0, 16);
+    qCritical() << QString("dynCond->billBox                %1 (%2)").arg((unsigned char)dynCond->billBox).arg((unsigned char)dynCond->billBox, 0, 16);
+    qCritical() << QString("dynCond->modeAbrech             %1 (%2)").arg((unsigned char)dynCond->modeAbrech).arg((unsigned char)dynCond->modeAbrech, 0, 16);
+    qCritical() << QString("dynCond->onAlarm                %1 (%2)").arg((unsigned char)dynCond->onAlarm).arg((unsigned char)dynCond->onAlarm, 0, 16);
+    qCritical() << QString("dynCond->nowCardTest            %1 (%2)").arg((unsigned char)dynCond->nowCardTest).arg((unsigned char)dynCond->nowCardTest, 0, 16);
+    qCritical() << QString("dynCond->nowPayment             %1 (%2)").arg((unsigned char)dynCond->nowPayment).arg((unsigned char)dynCond->nowPayment, 0, 16);
+    qCritical() << QString("dynCond->lastMifCardType        %1 (%2)").arg((unsigned char)dynCond->lastMifCardType).arg((unsigned char)dynCond->lastMifCardType, 0, 16);
+    qCritical() << QString("dynCond->lastSDoorState         %1 (%2)").arg(dynCond->lastSDoorState).arg(dynCond->lastSDoorState, 0, 16);
+    qCritical() << QString("dynCond->lastVDoorState         %1 (%2)").arg(dynCond->lastVDoorState).arg(dynCond->lastVDoorState, 0, 16);
+    qCritical() << QString("dynCond->lastCBstate            %1 (%2)").arg(dynCond->lastCBstate).arg(dynCond->lastCBstate, 0, 16);
+    qCritical() << QString("dynCond->paymentInProgress      %1 (%2)").arg((unsigned char)dynCond->paymentInProgress).arg((unsigned char)dynCond->paymentInProgress, 0, 16);
+    qCritical() << QString("dynCond->U_Batt                 %1 (%2)").arg(dynCond->U_Batt).arg(dynCond->U_Batt, 0, 16);
+    qCritical() << QString("dynCond->nrCoinsInBox           %1 (%2)").arg(dynCond->nrCoinsInBox).arg(dynCond->nrCoinsInBox, 0, 16);
+    qCritical() << QString("dynCond->amountInBox            %1 (%2)").arg(dynCond->amountInBox).arg(dynCond->amountInBox, 0, 16);
+    qCritical() << QString("dynCond->totalTransVolume       %1 (%2)").arg(dynCond->totalTransVolume).arg(dynCond->totalTransVolume, 0, 16);
+    qCritical() << QString("dynCond->totalNrOfVends         %1 (%2)").arg(dynCond->totalNrOfVends).arg(dynCond->totalNrOfVends, 0, 16);
+    qCritical() << QString("dynCond->resultOfLastTemplPrint %1 (%2)").arg((unsigned char)dynCond->resultOfLastTemplPrint).arg((unsigned char)dynCond->resultOfLastTemplPrint, 0, 16);
+    qCritical() << QString("dynCond->lastPrinterStatus      %1 (%2)").arg(dynCond->lastPrinterStatus).arg(dynCond->lastPrinterStatus, 0, 16);
+    qCritical() << QString("dynCond->startupTestIsRunning   %1 (%2)").arg(dynCond->startupTestIsRunning).arg(dynCond->startupTestIsRunning, 0, 16);
+    qCritical() << QString("dynCond->totalNrOfCuts          %1 (%2)").arg(dynCond->totalNrOfCuts).arg(dynCond->totalNrOfCuts, 0, 16);
+    qCritical() << QString("dynCond->nextAccountNumber      %1 (%2)").arg(dynCond->nextAccountNumber).arg(dynCond->nextAccountNumber, 0, 16);
+    qCritical() << QString("dynCond->nrOfBillsInBox         %1 (%2)").arg(dynCond->nrOfBillsInBox).arg(dynCond->nrOfBillsInBox, 0, 16);
+    qCritical() << QString("dynCond->UbatAtLastPrint        %1 (%2)").arg(dynCond->UbatAtLastPrint).arg(dynCond->UbatAtLastPrint, 0, 16);
+}
+
 char T_datif::loadRecDataFromFrame()
 {
     // is called even with wrong received data in order to speed up the process (stop waiting for response)
@@ -478,10 +582,12 @@ char T_datif::loadRecDataFromFrame()
     if (gpi_getNowIsBootload())
     {
         datif_cmdWasPerformed=1;
-        cycl_running=100;         // stop waiting for response and wait 1cycle till next sending
+        cycl_running=GOTRESP_SENDGAP;         // stop waiting for response and wait 1cycle till next sending
         return 0;
     }
 
+    memset(receivedData, 0x00, sizeof(receivedData));
+
     ret=myDCIF->getReceivedInData(&SlaveAdr, &readSource, &readAddress,  &RdDleng, receivedData);
         // nur true wenn CommandState OK und readState OK
 
@@ -504,16 +610,127 @@ char T_datif::loadRecDataFromFrame()
                 receivedData[12], receivedData[13], receivedData[14], receivedData[15]);
         */
         datif_cmdWasPerformed=2;    //  NO :((
-        cycl_running=100;         // stop waiting for response and wait 1cycle till next sending
+        cycl_running=GOTRESP_SENDGAP;         // stop waiting for response and wait 1cycle till next sending
         return 0;
     }
     datif_cmdWasPerformed=1;    // YES :), stop repeating
-    cycl_running=100;             // stop waiting for response
+    cycl_running=GOTRESP_SENDGAP;             // stop waiting for response
 
     //qDebug() << "datif: got valid response ";
 
     gpi_storeRecPayLoad(RdDleng, receivedData); //  save for host (user of hwapi)
 
+    if (myDCIF && myDCIF->getSerialPort()) {
+        uint32_t writeCount = myDCIF->getSerialPort()->getWriteCount();
+        if ((readCount + 1) == writeCount) { // there can be only one command sent to the DC
+            readCount = writeCount;
+            if (readSource != myDCIF->getReadSource()) {
+                qCritical() << __func__ << ":" << __LINE__ << ": ERROR length" << RdDleng << ", ignore data"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                qCritical() << __func__ << ":" << __LINE__ << "would be interpretated as" << readSource << myDCIF->getReadSource();
+                return 0;
+            } else {
+                // only for debugging
+                // qCritical() << __func__ << ":" << __LINE__ << QDateTime::currentDateTime().time().toString(Qt::ISODateWithMs) << readSource << myDCIF->getReadSource();
+                if (readSource == 30) {
+                    T_moduleCondition const *modCond = reinterpret_cast<T_moduleCondition const *>(receivedData);
+
+                    if(modCond->rtc >= 200) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E002 (modCond->rtc >= 200)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (modCond->printer == 200 || modCond->printer == 201) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E020 (modCond->printer == 200 || modCond->printer == 201)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (modCond->printer == 202) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E018 (modCond->printer == 202)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (modCond->coinBlocker >= 200) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E025 (modCond->coinBlocker >= 200)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (modCond->mdbBus >= 200) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E034 (modCond->mdbBus >= 200)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (modCond->intEe >= 200) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E011 (modCond->intEe >= 200)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (modCond->voltage >= 200) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E003 (modCond->voltage >= 200)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (modCond->changer >= 200) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E026 (modCond->changer >= 200)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (modCond->coinSafe == 201) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E007 (modCond->coinSafe == 201)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (modCond->coinSafe == 200) {
+                        dump(modCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E009 (modCond->coinSafe == 200)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                }
+
+                if (readSource == 31) {
+                    T_dynamicCondition const *dynCond = reinterpret_cast<T_dynamicCondition const *>(receivedData);
+
+                    if (dynCond->modeAbrech > 0) {
+                        dump(dynCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E011 (dynCond->modeAbrech > 0)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (dynCond->nowCardTest > 0) {
+                        dump(dynCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E072 (dynCond->nowCardTest > 0)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                    if (dynCond->startupTestIsRunning > 0) {
+                        dump(dynCond);
+                        qCritical() << __func__ << ":" << __LINE__ << ": ERROR E073 (dynCond->startupTestIsRunning > 0)"
+                            << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                    }
+                }
+            }
+        } else {
+            qCritical() << __func__ << ":" << __LINE__ << QString(": ERROR readCount + 1 != writeCount: %1 != %2").arg(readCount + 1).arg(writeCount);
+            qCritical() << __func__ << ":" << __LINE__ << ": ERROR length" << RdDleng << ", ignore data"
+                        << QByteArray((char const *)receivedData, RdDleng).toHex(':');
+            qCritical() << __func__ << ":" << __LINE__ << "would be interpretated as" << readSource << myDCIF->getReadSource();
+
+            if (readSource == 30) {
+                T_moduleCondition const *modCond = reinterpret_cast<T_moduleCondition const *>(receivedData);
+                dump(modCond);
+            }
+            if (readSource == 31) {
+                T_dynamicCondition const *dynCond = reinterpret_cast<T_dynamicCondition const *>(receivedData);
+                dump(dynCond);
+                if (dynCond->coinAttached > 0) {
+                    qCritical() << __func__ << ":" << __LINE__ << ": dynCond->coinAttached"
+                        << QByteArray(reinterpret_cast<char const *>(receivedData), RdDleng).toHex(':');
+                }
+            }
+
+            readCount = writeCount;
+            return 0;
+        }
+    }
+
     // uint8_t nn;
     //qDebug() << "\n datif: got valid data, rdsrc:" << readSource << "  rdadd:" << readAddress
      //        << "  rdlen:" << RdDleng;
@@ -546,6 +763,9 @@ char T_datif::loadRecDataFromFrame()
         localStr.append(ctmp);
     }
 
+    if (readSource==0)
+        return 0;       // done
+
     //qDebug() << "got HW version: " << localStr;
     switch (readSource) // = request command
     {
@@ -924,22 +1144,6 @@ char T_datif::loadRecDataFromFrame()
         break;
 
 
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-// ab hier neu:    12.4.23
-
     case CMD2DC_RDBK_DEV_PARA:      //14
 /*
             buf66[0]=devPara.kindOfPrinter;
@@ -990,22 +1194,30 @@ char T_datif::loadRecDataFromFrame()
     case 112:       // get inserted amount in cent in sum
         // byte 0..3: amount just paid   4,5:last coin type  6,7: last coin value
         newInsertedAmount=uchar2ulong(receivedData[3],receivedData[2],receivedData[1],receivedData[0]);
-        uitmp=uchar2uint(receivedData[5],receivedData[4]);
-        uit2=uchar2uint(receivedData[7],receivedData[6]);
-        //if (uitmp>0) // nur 1x bei neuer Münze  6.10.23 aendern: beim Wechsler hat die kleinste Muenze immer coin type 0!
-        if (uit2>0)
-        {
-            gpi_storeCurrentPayment(newInsertedAmount, uitmp, uit2);
-            //void gpi_storeCurrentPayment(uint32_t insertedAmount, uint16_t lastCoinType, uint16_t lastCoinValue)
-            if (newInsertedAmount != lastInsertedAmount)
-            {
-                emit datif_gotNewCoin();
-                //qDebug()<<"emit new coin";
+        uitmp=uchar2uint(receivedData[5],receivedData[4]);  // type of last coin
+        uit2=uchar2uint(receivedData[7],receivedData[6]);  //  value of last coin
+        //if (uitmp>0) // nur 1x bei neuer Münze  6.10.23 aendern:
+                        // beim Wechsler hat die kleinste Muenze immer coin type 0!
 
-                lastInsertedAmount=newInsertedAmount;
-            }
-              // qDebug()<<"datif   store new coin"<<newInsertedAmount<<" "<<uitmp<<" "<<uit2;
+        if (uitmp>10000 || uit2>10000)
+        {
+            uitmp=0;
+            uit2=0;
         }
+
+        if (uit2==3 || uit2==5 || uit2==10 || uit2==20 || uit2==50 || uit2==100 || uit2==200 || uit2==500)
+         {
+            // valid coin
+            if ((newInsertedAmount != lastInsertedAmount) || uit2>0 )
+            {
+                gpi_storeCurrentPayment(newInsertedAmount, uitmp, uit2);
+                emit datif_gotNewCoin();    // OR BILL  if (uitmp & 0x8000)>0
+                //qDebug()<<"emit new coin";
+                lastInsertedAmount=newInsertedAmount;
+                //qCritical()<<"datif 112 store and emit new coin "<<newInsertedAmount<<" "<<uitmp<<" "<<uit2;
+            }
+        }
+
         break;
 
     case 113:       // get wake source, 8byte
@@ -1031,33 +1243,24 @@ char T_datif::loadRecDataFromFrame()
         if (RdDleng>28)
         {
             gpi_storeDeviceConditions(RdDleng, receivedData);
+            datif_nowNewStats=1;        // 24.7.24 new
         }
         break;
 
     case 31:        // Get dynamic machine conditions (doors, voltage, alarm….)
-        if (RdDleng>50)
-        {
-            epi_setDcDataValid();    // DC-Data are valid as DC responded.
-                                        // Could be set to every response but this (31)
-                                        // is a very common and very important request
-            gpi_storeDynMachineConditions(RdDleng, receivedData);
-        }
-        /* funktioniert, ist aber nicht nötig. Signal wird nach dem shared memory erzeugt
-        prnResult=receivedData[52];
-        if (prnResult != lastResult)
-        {
-            // new result
-            if (prnResult==1)
-            {
-                emit datif_templatePrintFinished_OK();
-            } else
-            if (prnResult==2)
-            {
-                emit datif_templatePrintFinished_Err();
-            }
+                    // first 64 bytes, rest comes with cmd 34
 
-            lastResult=prnResult;
-        }*/
+        if (RdDleng>60)
+        {
+            //epi_setDcDataValid();    // 24.7.24 remove here
+            datif_nowNewDyns=1;         // 24.7.24 new
+
+            gpi_storeDynMachineConditions(RdDleng, receivedData);
+
+            gpi_storeDI_CoinAttach(receivedData[6]);    // new, 14.2.24 needed for direct coin insertion
+
+        } else
+            qDebug()<<"datif received cmd31 with "<<RdDleng<<" bytes only";
 
         break;
 
@@ -1073,24 +1276,22 @@ char T_datif::loadRecDataFromFrame()
         gpi_storeDCbackupAccNr(RdDleng, receivedData);
         break;
 
+    case 34:        // Get dynamic machine conditions part 2
+        if (RdDleng>5)
+        {
+            gpi_storeDynMachCond2(RdDleng, receivedData);
+            //qDebug()<<"datif rec. cmd34: ";
+            //for (int nn=0; nn<64; nn++)
+             //   qDebug() << nn << " : " << receivedData[nn] << " ";
+
+        }
+        break;
+
     case 35:
         gpi_storeMifCardType(RdDleng, receivedData);
         break;
     case 38:        // Get stored account record backup
-        // readAddress,  &RdDleng, receivedData
-        //if (RdDleng>50)       // 1.8.23 nach Verlängerung des Datensatzes um 20byte falsch!!!
-        //{
             gpi_storeVaultRecord(readAddress, receivedData );   // always/max 64byte
-/*
-            qDebug()<<"datif cmd38 got vault data. blockNr: "<<readAddress;
-            if (readAddress==0)
-                for (nn=0; nn<64; nn+=8)
-                {
-                    qDebug()<<receivedData[nn]<<" "<<receivedData[nn+1]<<" "<<receivedData[nn+2]<<" "<<receivedData[nn+3]<<" "
-                             <<receivedData[nn+4]<<" "<<receivedData[nn+5]<<" "<<receivedData[nn+6]<<" "<<receivedData[nn+7];
-                }
-*/
-        //}
         break;
 
     case 39:
@@ -1136,6 +1337,9 @@ char T_datif::loadRecDataFromFrame()
         }
         break;
 
+    default:
+        qCritical()<<"datif, error received unknown cmd "<< readSource;
+
     }
     readSource=0;   // 17.05.2023: to avoid multiple recording
 

src/hwapi.cpp

@@ -5,18 +5,7 @@
  * This api uses stored data and returns them in the following functions
  * created: Q1/2020 TS until Q2/21
 
-14.7.23TS: patch for correct printer state in line 3364 in sys_getDeviceConditions(struct T_moduleCondition *devCond) const
-
-8.9.2023 two new functions (end of file) for mifare test. Interface version 4.4   DC4.40...4.43
-
-14.09.2023: Verriegelung eingebaut, nur noch gültige Abr.Daten zurückgeben, Suchbegriff: <epi_restoreVaultRecord>
-            alle Mifare-Funktionen ueberprueft und ggf verbessert
-    18.09.2023: Signal "Kasse entnommen" und Signale "Tuer auf/zu" ueberprueft
-
-20.9.2023: in datif die Abfrage der DynMachineData massiv beschleunigt
-            und hier in hwapi die entprellten Werte fuer Tueren und Kasse verwenden.
-            Problem war: Signal "Kasse entnommen" war zu langsam -> manchmal abr nicht gesendet
-
+ see history in hwapi.h
 */
 
 #include "hwapi.h"
@@ -37,7 +26,7 @@ static uint8_t bl_startupStep;
 
 
 
-hwapi::hwapi(QWidget *parent) : QObject(parent)
+hwapi::hwapi(QObject *parent) : QObject(parent)
 {
     // constructor
     qCritical() << "             hwapi::hwapi() APP_VERSION:" << APP_VERSION;
@@ -67,7 +56,7 @@ hwapi::hwapi(QWidget *parent) : QObject(parent)
 #error "SLAVE LIB COMPILED INTO MASTER"
 #endif
 
-        myDatif = new T_datif();    // für die  CAslave-Lib auskommentieren!
+        myDatif = new T_datif(this);    // für die  CAslave-Lib auskommentieren!
 
 #endif
 
@@ -1767,8 +1756,10 @@ QString hwapi::mif_getCardDataStr(uint8_t blockNumber) const
 
 uint8_t hwapi::prn_getHwState(struct Tprn_hw_state *prn_hw_state) const
 {
-    // return printer hardware state: power is on? rs-driver on? rs_switch ok? hw-ready-line ok?
-    //        printer on error or ok?
+    // return value:
+    //       0:   unknown           1: printer OK
+    //       100: printer OK but paper near end
+    //       200: not connected      201: printer on error     202: no paper
 
     return runProcess->prn_getHwState(prn_hw_state);
 
@@ -1776,13 +1767,8 @@ uint8_t hwapi::prn_getHwState(struct Tprn_hw_state *prn_hw_state) const
 
 bool hwapi::prn_isUpAndReady(void) const
 {
-    // 25.5.2023: geht nicht richtig :(  bringt immer false obwohl Drucker OK
-    struct Tprn_hw_state prnHwNow;
-
-    prn_getHwState(&prnHwNow);
-    if (prnHwNow.inIdle && prnHwNow.rsSwOk && prnHwNow.rsDrvOk && prnHwNow.powerRdBk )
-        return true;
-    return false;
+    // gefixt am 24.5.2024
+    return runProcess->prn_isUpAndReady();
 }
 
 void hwapi::prn_getCurrentFontSetting(struct Tprn_currentSettings *prn_fonts) const
@@ -1806,46 +1792,10 @@ void hwapi::prn_getCurrentFontSetting(struct Tprn_currentSettings *prn_fonts) co
 
 void hwapi::prn_sendText(QByteArray *buf) const
 {
-    uint16_t nn, pp, mm, leng_byt, leng_blk, llb, freeStak;
-    uint8_t  tmp66[66];
-
-    qCritical() << __PRETTY_FUNCTION__ << "RESET DC DATA VALID";
-
-    epi_clearDynMachineConditions();    // 24.6.23
-    gpi_storeDcDataValid(0);
-
-    // komplett aendern 11.9.23
-    memset(tmp66,0,66);
-    leng_byt=buf->size();
-    freeStak=check4freeFDstack();
-    freeStak<<=6;
-    if ( leng_byt > freeStak)
-    {
-        leng_byt=freeStak;      // shorten the buffer as we cannot return an error (void function)
-    }
-    llb=leng_byt % 64;      // length of last block, >0 if not dividable by 64
-    leng_blk=leng_byt / 64;
-
-    pp=0;
-    for (nn=0; nn<leng_blk; nn++)
-    {
-        for (mm=0; mm<64; mm++)
-            tmp66[mm]=buf->at(pp++);
-        longFDcmd_set(CMD2DC_PRI_PRINT_TXT, 0,0,64, tmp66);
-    }
-
-    if (llb>0)
-    {
-
-        //leng_blk++;         // z.B. 200 = 3 volle blocks und ein block mit nur 8byte
-        memset(tmp66,0,66);
-        for (mm=0; mm<llb; mm++)
-            tmp66[mm]=buf->at(pp++);
-        for (mm=llb; mm<64; mm++)
-            tmp66[mm]=0;
-        longFDcmd_set(CMD2DC_PRI_PRINT_TXT, 0,0,64, tmp66);
-    }
-
+    runProcess->prn_sendText(buf);
+    // 23.5.2024TS: moved function down to runProc in order to have it available there.
+    // here in hwapi only a wrapper left
+    // ( this also supports the idea to keep hwapi short :)
 }
 
 
@@ -1854,6 +1804,8 @@ void hwapi::prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3) cons
     // send three byte through to printer, see printers manual
     //sendWRcmd _setSendCommand8(SENDDIRCMD_PRN_SYS_CMD, para1, para2, 0, para3); hat gar nicht funktioniert
 
+    runProcess->prn_sendPrnSysCmd(para1, para2, para3);
+    /*
     uint8_t data[64];
     uint32_t ultmp=para3;
     memset(data, 0,64);
@@ -1867,6 +1819,7 @@ void hwapi::prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3) cons
     data[7]=uint8_t(ultmp);
 
     longFDcmd_set(CMD2DC_PRI_SYS_CMD, 0, 0, 8, data);
+    */
 // getestet auf richtige uebertragung  am 11.9.23TS
 
 }
@@ -1884,7 +1837,7 @@ void hwapi::prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density,  uint8_t alig
     //              byte3: alignment    'l', 'c', 'r' = left, center, right
     //              byte4: orientation  0, 90, 180    = 0°, 90°, 180° rotation (by now not supported!)
     // not batched! don't use twice within 100ms
-
+/*
     uint8_t buf[10];
     uint16_t uitmp;
 
@@ -1897,7 +1850,8 @@ void hwapi::prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density,  uint8_t alig
     buf[4]=orientation;
     buf[5]=0;
     longFDcmd_set(CMD2DC_PRI_SETUP,0,0,5, buf);
-
+*/
+    runProcess->prn_sendPrnSetup(paperSpeed, density,  alignment, orientation);
 }
 
 void hwapi::prn_movePaper(uint8_t wayInMm, uint8_t direction) const
@@ -2803,6 +2757,7 @@ bool hwapi::rtc_getExtendedTime(struct T_extTime *exTime) const
     epi_restoreExtendedTime(&len, buf);
         // Puffer in struct eintragen:
     LL=sizeof(struct T_extTime);
+    if (LL>64) LL=64;
     start = &(exTime->Hours);
     nn=0;
     do
@@ -3183,10 +3138,11 @@ void hwapi::sys_getDeviceConditions(struct T_moduleCondition *devCond) const
     uint8_t *start;
     uint8_t  buf[70], leng;
 
-    epi_restoreDeviceConditions(&leng, buf);
+    epi_restoreDeviceConditions(&leng, buf);    // leng is less then 64
 
         // Puffer in struct eintragen:
     LL=sizeof(struct T_moduleCondition);
+    if (LL>64) LL=64;
     start = &devCond->ram;
     nn=0;
     do
@@ -3228,26 +3184,27 @@ void hwapi::sys_getDeviceConditions(struct T_moduleCondition *devCond) const
 
 void hwapi::sys_getDynMachineConditions(uint8_t *leng, uint8_t *data) const
 {
+    // not complete anymore
     epi_restoreDynMachineConditions(leng, data);
 }
 
 void hwapi::sys_getDynMachineConditions(struct T_dynamicCondition *dynMachCond) const
 {
-
-    uint16_t LL, nn;
-    char *start;
-    uint8_t  buf[70], leng;
+    uint8_t  buf[130], leng;
 
     epi_restoreDynMachineConditions(&leng, buf);
-        // Puffer in struct eintragen:
-    LL=sizeof(struct T_dynamicCondition);
-    start = &dynMachCond->allDoorsDebounced;
-    nn=0;
-    do
-    {
-        *start = buf[nn];
-        start++;
-    } while(++nn<LL);
+    memcpy(dynMachCond, buf, sizeof(*dynMachCond)); // copy 64byte to the struct
+        // 3.7.24: stimmt nicht mehr weil struct im Ram die word grenzen einhaelt
+        // also ab hier einzeln uebertragen
+    dynMachCond->totalNrOfCuts = uchar2ulong(buf[57],buf[56],buf[55],buf[54]);
+    dynMachCond->nextAccountNumber = uchar2uint(buf[59], buf[58]);
+    dynMachCond->nrOfBillsInBox = uchar2uint(buf[61], buf[60]);
+
+    // 8.5.24TS, as the DC struct is >64byte now, it comes in two parts:
+    epi_restoreDynMachCond2(&leng, buf);
+    dynMachCond->amountInBillbox = uchar2ulong(buf[3], buf[2],buf[1],buf[0]);
+    dynMachCond->UbatAtLastPrint = uchar2uint(buf[5], buf[4]);
+    memcpy(&dynMachCond->reserve01, &buf[8], 56); // rest reserve
 
 }
 
@@ -3331,14 +3288,11 @@ void hwapi::sys_sendDeviceParameter(struct T_devices *deviceSettings) const
 
 void hwapi::sys_restoreDeviceParameter(struct T_devices *deviceSettings) const
 {
-    // attention: only applies if function "sys_sendDeviceParameter()" was used to send this settings before
-    //          cannot be used to see settings programmed by JsonFile
     uint8_t buf[64];
     uint8_t LL;
     tslib_strclr(buf,0,64);
 
-    //runProcess->epi_restore64BdevParameter(&LL, buf); // wozu die???
-    epi_restoreRbDeviceSettings(&LL, buf);      // viel besser, stimmt immer
+    epi_restoreRbDeviceSettings(&LL, buf);
 
     Q_STATIC_ASSERT(sizeof(*deviceSettings) <= sizeof(buf));
 
@@ -3413,6 +3367,7 @@ void hwapi::prn_requestCurrentDynData(void) const
 {
     sendFDcmd_set(0,39,0,0,0,0,0);    // rd data dynData
     epi_clearDynData();
+    epi_clearDynMachCond2();
 }
 
 bool hwapi::prn_getCurrentDynamicPrnValuesFromDC(uint8_t *dynPrnVal ) const
@@ -4092,8 +4047,8 @@ int8_t hwapi::bl_blockAutoResponse(void) const
 void hwapi::sys_requestJsonVersions(uint8_t  jsonNr) const
 {
     // send one request for every single version
-    // jsonNr=1...36, 1=config file (cust.Nr) 2=devices  3=cash  4=res.
-    //      5=printer template 1 ..... 36= template 32
+    // jsonNr=1...36, 1=config file (cust.Nr) 2=devices  3=cash  4,5=empty
+    //      6=printer template 1 ..... 37= template 32
     sendFDcmd_set(0, 21, jsonNr,0,0,0,0);
 }
 
@@ -4298,7 +4253,7 @@ bool hwapi::bna_getAllParameters(struct T_bna *bna) const
     bna->intendedAccept = uchar2uint(buf[31], buf[30]);
     bna->pad2=0;
     pp=32;
-    for (nn=0; nn<16; nn++)
+    for (nn=0; nn<8; nn++)  // was 16!!! // 8.5.24 reduced
     {
         bna->billDenomination[nn] = uchar2uint(buf[pp+1], buf[pp]);
        pp+=2;
@@ -4402,6 +4357,17 @@ uint16_t hwapi::bna_getStackerLevel(uint32_t *amountInStacker, uint16_t *countOf
     return anzahl;
 }
 
+
+// new, 14.3.24TS
+bool hwapi::cash_isCollectionStarted(void) const
+{
+    struct T_dynamicCondition myDynMachCond;
+    sys_getDynMachineConditions(&myDynMachCond);
+    if (myDynMachCond.paymentInProgress >=2)
+        return true;
+    return false;
+}
+
 QObject const *hwapi::getAPI() {
     return this;
 }
@@ -4658,7 +4624,61 @@ bool hwapi::dcDownloadGetRunning() const {
     return data ? data->m_downLoadDC.m_running.load() : 0;
 }
 
-bool hwapi::dcDownloadGetFinished() const {
+bool hwapi::dcDownloadGetFinished() const
+{
     SharedMem const *data = SharedMem::getDataConst();
     return data ? data->m_downLoadDC.m_running.load() : 0;
 }
+
+//uint16_t dcDownloadGetTotalBlockNumber() const override;
+//uint16_t dcDownloadGetCurrentBlockNumber() const override;
+//virtual QObject const *getAPI() override;
+
+
+
+void hwapi::mod_switchResetline(void)
+{
+    sendFDcmd_set(171,0,0, 2,0,0,0);
+}
+
+
+
+// new from 22.5.2024, print Json-Printer-Template which
+// is stored locally here in PTU memory,
+// rather then loading several jsons to DC and tell it to print (until now)
+// the local printer-json can have any length using predefined commands
+// printing a local printer-json happens like this:
+// 1) select a file to be printed from memory
+// 2) load, parse, translate and save the file with following function
+// 3) set dynamics (values from current transaction)
+// 4) send saved file to printer one or several times
+// hint: dynamics can be changed at any time without reloading the ticket, just repeat 3) and 4)
+
+void hwapi::prn_translateLocalPrinterJson(QByteArray jsonFile2print) const
+{
+    runProcess->sys_parseFile( jsonFile2print);
+    runProcess->sys_translateKeys();
+}
+
+void hwapi::prnStoreDynamics(char *bufferDynPrintVars[], uint8_t nrOfDyns) const
+{
+
+    runProcess->prnStoreDynamics(bufferDynPrintVars, nrOfDyns);
+    // store nrOfDyns (up to 16) dynamics before printing
+    // max length = 16 byte per dynamic
+}
+
+void hwapi::prn_printTranslatedTicket(void) const
+{
+    runProcess->prnStartDirectPrinting();
+}
+
+uint8_t hwapi::prn_waitForDirectTicket(void) const
+{
+    return runProcess->prn_getDirectPrintResult();
+        // return:  0: just printing, wait
+        //          1: OK - last print was succesful
+        //          2: error - not printed
+        //              2: printer error  3: no connection to DC
+
+}

src/prot.cpp

@@ -97,14 +97,22 @@ void T_prot::setRecLen(uint16_t ReadCmd)
 
 void T_prot::setUserWriteData(uint16_t WriteCmd, uint16_t WrAddr, uint8_t  WrDatLen, uint8_t *data)
 {
+    int nn;
     WriteCommand=WriteCmd;
     WriteAddr=WrAddr;
     WrDataLength=WrDatLen;
     if (WrDataLength>FRAME_DATALEN)
         WrDataLength=FRAME_DATALEN;
 
-    for (int nn=0; nn<WrDataLength; nn++)
+    // ui8BLsendData[BL_DATA_LEN];
+
+    for (nn=0; nn<WrDataLength; nn++)
         ui8OutputData[nn]=data[nn];
+
+    // clear the rest. added at 26.6.2024TS. important for printer text
+    for (nn=WrDataLength; nn<FRAME_DATALEN; nn++)
+        ui8OutputData[nn]=0;
+
     SendDataValid=1;    // always set WR first
     kindOfData=0;    // 0: binaries, 1:text
     this->setRecLen(100);   // default: short response
@@ -360,6 +368,9 @@ uint8_t recBuffer[FRAME_MAXLEN];
     // read from "VCP":
     mySerialPort->readFromSerial(Indata, recLength);
 //qDebug()<<"prot: got data " << recLength;
+
+    memset(recBuffer, 0x00, sizeof(recBuffer));
+
     if (recLength>FRAME_MAXLEN)
         recLength=FRAME_MAXLEN;
     for (int nn=0; nn<recLength; nn++)

src/sendWRcmd.cpp

@@ -19,7 +19,11 @@ void sendWRcmd_INI(void)
 
 }
 
-// Command Stack for commands without parameters
+uint8_t sendWRcmd_getStackSize(void)
+{
+    return CMDSTACKDEPTH;       // defined in shared_mem_buffer.h
+}
+
 
 
 //static uint16_t nextAsynchsendCmd0[CMDSTACKDEPTH];

src/storeINdata.cpp

@@ -9,7 +9,7 @@
 // gpi: grafical access to PI: access from external devices over device controller FOR GUI
 // epi: external access from GUI to PI:  FOR external devices (DC)
 
-
+// Change log: 8.5.24TS: clear all oversize buffers (if only 32 of 64bytes are used then fill the rest with 0)
 
 
 
@@ -1002,6 +1002,8 @@ bool epi_getDI_auxPwr(void)
 void gpi_storeDI_GsmPowerIsOn(bool di_gsm_PwrOn)
 {
     SharedMem::write()->di_gsmPwrOn=di_gsm_PwrOn;
+    //qDebug()<<"store In Data Gsm Pwr = "<< di_gsm_PwrOn;
+
 }
 
 bool epi_getDI_gsmPwr(void)
@@ -1541,6 +1543,8 @@ void gpi_storeMdbResponse(uint8_t leng, uint8_t *data)
     //tslib_strcpy(data, SharedMem::write()->Sdata_RecBuff, uint16_t(Sdata_mdbNrOfRecData));
     for (nn=0; nn<leng; nn++)
         SharedMem::write()->Sdata_RecBuff[nn] = data[nn];
+    for (nn=leng; nn<40; nn++)
+        SharedMem::write()->Sdata_RecBuff[nn] = 0;
 
 }
 
@@ -1567,6 +1571,8 @@ void gpi_storeEmpSettings(uint8_t leng, uint8_t *data)
     //tslib_strcpy(data, SharedMem::write()->Sdata_emp_settingsBuff, leng);
     for (nn=0; nn<leng; nn++)
         SharedMem::write()->Sdata_emp_settingsBuff[nn] = data[nn];
+    for (nn=leng; nn<64; nn++)
+        SharedMem::write()->Sdata_emp_settingsBuff[nn] = 0;
 
 }
 
@@ -1672,6 +1678,9 @@ void gpi_storeRbDeviceSettings(uint8_t leng, uint8_t *data)       // getestet am
     //tslib_strcpy(data, SharedMem::write()->Sdata_DeviceSettingBuff, leng);
     for (nn=0; nn<leng; nn++)
         SharedMem::write()->Sdata_DeviceSettingBuff[nn] = data[nn];
+    for (nn=leng; nn<64; nn++)
+        SharedMem::write()->Sdata_DeviceSettingBuff[nn] = 0;
+
 
 }
 
@@ -1773,15 +1782,25 @@ void epi_clearCurrentPayment(void)
 
 void gpi_storeCurrentPayment(uint32_t insertedAmount, uint16_t lastCoinType, uint16_t lastCoinValue)
 {
-    uint8_t pLC=SharedMem::read()->p_lastCoin;
-    SharedMem::write()->store_insertedAmount=insertedAmount;
-    SharedMem::write()->store_lastCoinType[pLC]=lastCoinType;
-    SharedMem::write()->store_lastCoinValue[pLC]=lastCoinValue;
-    pLC++;
-    SharedMem::write()->p_lastCoin=pLC;
-    SharedMem::write()->store_curPayNewCoin++;
+    uint8_t pLC;
+
+    // 21.3.24 attention: if bit 15 in lastCoinType is set then we got a bill not a coin
+    SharedMem::write()->store_insertedAmount=insertedAmount;
+    if (lastCoinType & 0x8000)
+    {
+        // then it's a banknote
+        //qCritical()<<"gpi_storeCurrentPayment got banknote, total: "<<insertedAmount;
+    } else
+    {
+        //qCritical()<<"gpi_storeCurrentPayment "<<insertedAmount<<" " << lastCoinType<<" " << lastCoinValue;
+        pLC=SharedMem::read()->p_lastCoin;
+        SharedMem::write()->store_lastCoinType[pLC]=lastCoinType;
+        SharedMem::write()->store_lastCoinValue[pLC]=lastCoinValue;
+        pLC++;
+        SharedMem::write()->p_lastCoin=pLC;
+        SharedMem::write()->store_curPayNewCoin++;
+    }
 
-    //qDebug()<<"gpi_storeCurrentPayment "<<insertedAmount<<" " << lastCoinType<<" " << lastCoinValue;
 }
 
 uint32_t epi_CurrentPaymentGetAmount(void)
@@ -1819,6 +1838,13 @@ bool epi_CurrentPaymentGetAllCoins(uint16_t *types, uint16_t *values)
     return true;
 }
 
+/*
+int nn;
+for (nn=0; nn<8; nn++)
+{
+    data[nn]=SharedMem::read()->store_bnaCollect[nn];
+}
+*/
 
 //uint64_t stor_wakSrc;
 //uint8_t  stor_reason;
@@ -1895,6 +1921,10 @@ void gpi_storeDeviceConditions(uint8_t leng, uint8_t *data)
     //tslib_strcpy(data, SharedMem::write()->store_deviceCond, leng);
     for (nn=0; nn<leng; nn++)
         SharedMem::write()->store_deviceCond[nn]=data[nn];
+    // clear the rest
+    for (nn=leng; nn<64; nn++)
+        SharedMem::write()->store_deviceCond[nn]=0;
+
 }
 
 void epi_restoreDeviceConditions(uint8_t *leng, uint8_t *data)
@@ -1930,6 +1960,8 @@ void gpi_storeDynMachineConditions(uint8_t leng, uint8_t *data)
 //    tslib_strcpy(data, SharedMem::write()->store_machCond, leng);
     for (nn=0; nn<leng; nn++)
         SharedMem::write()->store_machCond[nn] = data[nn];
+    for (nn=leng; nn<64; nn++)
+        SharedMem::write()->store_machCond[nn] = 0;
 
  }
 
@@ -2081,16 +2113,26 @@ void epi_setDcDataValid(void)
     }
 }
 
-void epi_resetDcDataValid(void)
+void epi_resetDcDataValid(char reason)
 {
     bool now=SharedMem::read()->store_DcDataAreValid;
     if (now==true)
     {
         SharedMem::write()->store_DcDataAreValid = false;
 #ifdef THIS_IS_CA_MASTER
-        qDebug()<<"master lib RESET DcDataValid";
+        switch (reason)
+        {
+            case 1: qDebug()<<"master lib RESET DcDataValid startup"; break;
+            case 2: qDebug()<<"master lib RESET DcDataValid port closed"; break;
+            case 3: qDebug()<<"master lib RESET DcDataValid no more data"; break;
+            case 4: qDebug()<<"master lib RESET DcDataValid manuell"; break;
+            default: qDebug()<<"master lib RESET DcDataValid ---"; break;
+        }
+
+
 #else
         qDebug()<<"slave lib RESET DcDataValid";
+        Q_UNUSED(reason);
 #endif
     }
 }
@@ -2329,6 +2371,7 @@ void epi_getJsonVersion(uint8_t  jsonNr, char *versionString)
             versionString[nn] = SharedMem::read()->store_jsonVersion[nn][lrd];
     }
 
+    // korrektur 8.5.24: printer versionen auf 6...37 (nicht 5..36)
 }
 
 
@@ -2435,7 +2478,40 @@ void epi_restoreBnaContent(uint8_t  *data)
 
 
 
-
+// new, 8.5.24
+//uint8_t store_machCon2len;
+//uint8_t store_machCon2[66];
+
+void epi_clearDynMachCond2(void)
+{
+    uint8_t nn;
+    SharedMem::write()->store_machCon2len=0;
+    for (nn=0; nn<64; nn++)
+        SharedMem::write()->store_machCon2[nn] = 0;
+}
+
+
+void gpi_storeDynMachCond2(uint8_t leng, uint8_t *data)
+{
+    uint8_t nn;
+    if (leng>64) leng=64;
+    SharedMem::write()->store_machCon2len=leng;
+    for (nn=0; nn<leng; nn++)
+        SharedMem::write()->store_machCon2[nn] = data[nn];
+    for (nn=leng; nn<64; nn++)
+        SharedMem::write()->store_machCon2[nn] = 0;
+
+ }
+
+void epi_restoreDynMachCond2(uint8_t *leng, uint8_t *data)
+{
+    uint8_t nn, LL;
+    LL=SharedMem::read()->store_machCon2len;
+    *leng=LL;
+
+    for (nn=0; nn<LL; nn++)
+        data[nn] = SharedMem::read()->store_machCon2[nn];
+}
 
 
 

src/tslib.cpp

@@ -610,3 +610,374 @@ bool tslib_strComp(uint8_t *buf, char *compStr)
     return true;
 }
 
+
+
+
+
+
+char biox_StrComp(char *S1, char *S2, int len)
+{
+    // retval=1 wenn gleich; ? in S2 =Jokerzeichen
+
+    int    ii;
+
+    for (ii=0; ii<len; ii++)
+    {
+        if ((S1[ii] != S2[ii]) && (S2[ii] != '?') )
+            return (0);
+    }
+
+    return(1);
+
+}
+
+// *****************************************************************************************
+
+uint16_t tslib_StrLen(char *str)
+{
+    uint16_t    zz;
+
+    for (zz=0; zz<0xF000; zz++)
+        if (str[zz]==0)
+            return(zz);
+
+    return(0);
+}
+
+
+// *****************************************************************************************
+
+uint16_t biox_StrLenInt(uint16_t *str)
+{
+    uint16_t    zz;
+
+    for (zz=0; zz<0xF000; zz++)
+        if (str[zz]==0)
+            return(zz);
+
+    return(0);
+}
+
+// *****************************************************************************************
+
+void biox_MemCpy(uint8_t *src, uint8_t *dest, uint16_t Len)
+{
+    // copy "Len" bytes from target to destination
+    // if Len==0 then copy until first NULL in targ
+
+    uint16_t    zz=0;
+    if (Len==0)
+    {
+        while(src[zz]>0)
+        {
+            dest[zz]=src[zz];
+            zz++;
+        }
+        dest[zz]=0;     // termination
+    } else
+    {
+        // Len>0  --> copy "Len" bytes
+        for (zz=0; zz<Len; zz++)
+            dest[zz]=src[zz];
+
+        dest[zz]=0;     // termination
+    }
+
+}
+
+
+void tslib_itoa(int n, char *str)
+{
+    // -23456 -> str[0]='-'   str[1]='2' ...[5]='6' str[6]=0
+    // 5      -> str[0]='5'   str[1..6]=0
+
+    uint8_t   pp, zi[7];
+    int itmp, pi=0;
+
+    for (pp=0;pp<7;pp++)
+    {
+        str[pp]=0;
+        zi[pp]=0;
+    }
+
+    itmp=n;
+    pp=0;
+
+    if (itmp==0)
+        str[pp++]=0x30;
+
+    if (itmp<0)
+    {
+        str[pp++]='-';
+        itmp*=-1;
+    }
+
+    while(itmp>0)
+    {
+        zi[pi++]=itmp%10;
+        itmp/=10;
+    }
+    // now: zi[0]=6  zi[1]=5   zi[2]=4    zi[3]=3   zi[4]=2   zi[5]=0   zi[6]=0    pi=4
+    while (pi>0)
+        str[pp++]=zi[--pi]+0x30;
+
+    //str[0]='-'; str[1]='1'; str[3]='3';  // Test
+ }
+
+// ***********************************************************************************************
+
+void tslib_uitoa(unsigned int n, char *str)
+{
+
+    uint8_t   pp, zi[6];
+    unsigned int itmp;
+    int pi=0;
+
+    for (pp=0;pp<6;pp++)
+    {
+        str[pp]=0;
+        zi[pp]=0;
+    }
+
+    itmp=n;
+    pp=0;
+
+    if (itmp==0)
+        str[pp++]=0x30;
+
+    while(itmp>0)
+    {
+        zi[pi++]=itmp%10;
+        itmp/=10;
+    }
+    // now: zi[0]=6  zi[1]=5   zi[2]=4    zi[3]=3   zi[4]=2   zi[5]=0      pi=4
+    while (pi>0)
+        str[pp++]=zi[--pi]+0x30;
+
+    //str[0]='-'; str[1]='1'; str[3]='3';  // Test
+ }
+
+// ***********************************************************************************************
+
+void tslib_ltoa(long n, char *str)
+{
+    // -2147483647 -> str[0]='-'   str[1]='2' ...[10]='6' str[11]=0
+
+    uint8_t   pp, zi[12];
+    int pi=0;
+    long ltmp;
+
+    for (pp=0;pp<12;pp++)
+    {
+        str[pp]=0;
+        zi[pp]=0;
+    }
+
+    ltmp=n;
+    pp=0;
+
+    if (ltmp==0)
+        str[pp++]=0x30;
+
+    if (ltmp<0)
+    {
+        str[pp++]='-';
+        ltmp*=-1;
+    }
+
+    while(ltmp>0)
+    {
+        zi[pi++]=ltmp%10;
+        ltmp/=10;
+    }
+
+    while (pi>0)
+        str[pp++]=zi[--pi]+0x30;
+
+
+}
+
+// ***********************************************************************************************
+
+void tslib_ultoa(unsigned long n, char *str)
+{
+    // 0... ->4294967296   str[0]='4'   str[1]='2' ...[9]='6' str[10]=0   str[11]=0
+
+    uint8_t   pp, zi[12];
+    int pi=0;
+    unsigned long ltmp;
+
+    for (pp=0;pp<12;pp++)
+    {
+        str[pp]=0;
+        zi[pp]=0;
+    }
+
+    ltmp=n;
+    pp=0;
+
+    if (ltmp==0)
+        str[pp++]=0x30;
+
+    while(ltmp>0)
+    {
+        zi[pi++]=ltmp%10;
+        ltmp/=10;
+    }
+
+    while (pi>0)
+        str[pp++]=zi[--pi]+0x30;
+}
+
+// ***********************************************************************************************
+
+void tslib_uitobin(unsigned int  decval, char *str)
+{
+    uint16_t    dv, bb;
+    int     ll;
+
+    dv=decval;
+    ll=8;                // show 8 bit
+    if (dv>255) ll=16;   // show 16 bit
+    str[ll--]=0;         // terminierung
+
+    bb=0;
+    do
+    {
+        if (dv & (1<<bb) ) str[ll]=0x31; else str[ll]=0x30;
+        bb++; ll--;
+    } while(ll>=0);
+
+
+
+}
+
+// ***********************************************************************************************
+
+long tslib_atol( char *AscString)
+{
+    // change ascii string ( of ascii numbers '0'..'9') to number
+    // AscString must be 0-terminated!
+    // a leading '-' is ignored, a'.' or a ',' stops calculation
+
+    //aufruf mit ("1234")
+    // aus IDE: ucatmp[0]='1'   ucatmp[3]='4'   ucatmp[4]='0'      sl=4
+
+    unsigned long ultmp;
+    unsigned char uctmp1, minus=0;
+    unsigned int  sl, zz;
+
+    sl=tslib_StrLen(AscString);
+    if (sl>10) sl=10;            // mehr passt im ULONG nicht rein!
+
+    ultmp=0;
+    for (zz=0; zz<sl; zz++)
+    {
+        uctmp1=AscString[zz];
+        if (zz==0 && uctmp1=='-')
+            minus=1;
+        else
+        if (uctmp1>0x2F && uctmp1<0x3A)
+        {
+            ultmp*=10;      // nur wenn eine neue Ziffer dazukommt und vor der addition!
+            uctmp1-=0x30;
+            ultmp+=(uint32_t)uctmp1;
+
+        } else
+        if (uctmp1=='.' || uctmp1==',' || uctmp1==0 )
+        {
+            if (minus)
+                ultmp*=(-1);
+            return(ultmp);
+        }
+    }
+
+    if (minus)
+        ultmp*=(-1);
+    return(ultmp);
+
+}
+
+// *****************************************************************************************
+
+unsigned long tslib_atoul( char *AscString)
+{
+    // change ascii string ( of ascii numbers '0'..'9') to number
+    // AscString must be 0-terminated!
+    // a leading '-' is ignored, a'.' or a ',' stops calculation
+
+    //aufruf mit ("1234")
+    // aus IDE: ucatmp[0]='1'   ucatmp[3]='4'   ucatmp[4]='0'      sl=4
+
+    unsigned long ultmp;
+    unsigned char uctmp1;
+    unsigned int  sl, zz;
+
+    sl=tslib_StrLen(AscString);
+    if (sl>10) sl=10;            // mehr passt im ULONG nicht rein!
+
+    ultmp=0;
+    for (zz=0; zz<sl; zz++)
+    {
+        uctmp1=AscString[zz];
+        if (uctmp1>0x2F && uctmp1<0x3A)
+        {
+            ultmp*=10;      // nur wenn eine neue Ziffer dazukommt und vor der addition!
+            uctmp1-=0x30;
+            ultmp+=(uint32_t)uctmp1;
+
+        } else
+        if (uctmp1=='.' || uctmp1==',' || uctmp1==0 )
+            return(ultmp);
+    }
+
+    return(ultmp);
+
+}
+
+// *****************************************************************************************
+
+unsigned int tslib_ah2ui( char *AscString)
+{
+    // change hex ascii string ( of ascii numbers '0'..'9', 'A' or 'a' ...'F','f') to number
+    // AscString must be 0-terminated!
+    // Example: "1A0C" = 6668
+
+    //unsigned long ultmp;
+    unsigned char uctmp1;
+    unsigned int  sl, zz, uitmp;
+
+    sl=tslib_StrLen(AscString);
+    if (sl>4) sl=4;
+
+    uitmp=0;
+    for (zz=0; zz<sl; zz++)
+    {
+        uctmp1=AscString[zz];
+
+        if (uctmp1>=0x30 && uctmp1<=0x39)
+        {
+            uitmp<<=4;      // nur wenn eine neue Ziffer dazukommt und vor der addition!
+            uctmp1-=0x30;
+            uitmp+=(uint16_t)uctmp1;
+        } else
+
+        if (uctmp1>='A' && uctmp1<='F')
+        {
+            uitmp<<=4;
+            uctmp1-=0x37;
+            uitmp+=(uint16_t)uctmp1;
+        } else
+
+        if (uctmp1>='a' && uctmp1<='f')
+        {
+            uitmp<<=4;
+            uctmp1-=0x57;
+            uitmp+=(uint16_t)uctmp1;
+        }
+
+    }
+
+    return(uitmp);
+
+}