Fix: add source-files to project

send signal runProc_coinAttached only if state changes from false true.

DCLibraries.pri

@@ -90,7 +90,9 @@ HEADERS += \
     $${PWD}/include/sendWRcmd.h \
     $${PWD}/include/storeINdata.h \
     $${PWD}/include/tslib.h \
-    $${PWD}/include/shared_mem_buffer.h
+    $${PWD}/include/shared_mem_buffer.h \
+    $${PWD}/include/reporting_thread.h \
+    $${PWD}/include/download_thread.h
 
 SOURCES += \
     $${PWD}/src/datei.cpp \
@@ -101,7 +103,9 @@ SOURCES += \
     $${PWD}/src/sendWRcmd.cpp \
     $${PWD}/src/storeINdata.cpp \
     $${PWD}/src/tslib.cpp \
-    $${PWD}/src/shared_mem_buffer.cpp
+    $${PWD}/src/shared_mem_buffer.cpp \
+    $${PWD}/src/reporting_thread.cpp \
+    $${PWD}/src/download_thread.cpp
 
 
 # INTERFACE = DeviceController

include/download_thread.h

@@ -0,0 +1,37 @@
+#ifndef DOWNLOAD_THREAD_H_INCLUDED
+#define DOWNLOAD_THREAD_H_INCLUDED
+
+#include <QThread>
+#include <QString>
+#include <QByteArray>
+
+class hwinf;
+class DownloadThread : public QThread {
+    Q_OBJECT
+
+public:
+    enum class DownloadResult {OK, ERROR, TIMEOUT, NOP};
+
+    DownloadThread(hwinf *hw);
+    ~DownloadThread();
+
+protected:
+    // download thread does not have a running event queue, and therefore
+    // no slots. signals work the usual way.
+    void run() override;
+
+private:
+    DownloadResult sendStatus(int ret) const;
+    DownloadResult sendNextAddress(int bNum) const;
+    DownloadResult sendNextDataBlock(QByteArray const &binary, int bNum) const;
+    bool startBootloader() const;
+    bool stopBootloader() const;
+    QByteArray loadBinaryDCFile(QString dcFileName) const;
+    bool resetDeviceController() const;
+    DownloadResult dcDownloadBinary(QByteArray const &b) const;
+
+    hwinf *m_hw;
+    QString m_fileToDownload;
+};
+
+#endif // DOWNLOAD_THREAD_H_INCLUDED

include/hwapi.h

@@ -1384,9 +1384,7 @@ signals:
     void hwapi_doorCBinAndAllDoorsClosed(void) const override;
     void hwapi_doorAllDoorsClosed(void) const override;
 
-
-
-
+    void hwapi_coinAttached() const override;
 
  private slots:
     //void hwapi_slotPrintFinished_OK(void);
@@ -1414,8 +1412,7 @@ signals:
     void sub_slotCoin15(void);
     void sub_slotCoin16(void);
 
-
-
+    void coinAttached();
 
 };
 

include/interfaces.h

@@ -2390,6 +2390,7 @@ signals:
     virtual void hwapi_doorCBinAndAllDoorsClosed(void) const=0;
     virtual void hwapi_doorAllDoorsClosed(void) const=0;
 
+    virtual void hwapi_coinAttached() const = 0;
 
     // NOTE: declaring a "pure virtual" "signal" should be an error and thus not valid.
     /* GH Version, bringt Fehler

include/reporting_thread.h

@@ -0,0 +1,25 @@
+#ifndef REPORTING_THREAD_H_INCLUDED
+#define REPORTING_THREAD_H_INCLUDED
+
+#include <QThread>
+#include <QString>
+
+class hwapi;
+class ReportingThread : public QThread {
+    Q_OBJECT
+
+public:
+    ReportingThread(hwapi *hw);
+    ~ReportingThread();
+
+protected:
+    // reporting thread does not have a running event queue, and therefore
+    // no slots. signals work the usual way.
+    void run() override;
+
+private:
+    hwapi *m_hw;
+    QString m_fileToDownload;
+};
+
+#endif // REPORTING_THREAD_H_INCLUDED

include/runProc.h

@@ -15,6 +15,7 @@
 #include <QDebug>
 #include "datIf.h"
 #include <QSharedMemory>
+#include <atomic>
 #include "sendWRcmd.h"
 #include "controlBus.h"
 #include "storeINdata.h"
@@ -35,6 +36,10 @@ class T_runProc : public QObject
 
     void restoreDeviceParameter(struct T_devices *deviceSettings);
 
+#ifndef THIS_IS_CA_MASTER
+    std::atomic_bool m_coinAttached{false};
+#endif
+
 private slots:
     void runProc_slotProcess(void);
     bool bl_performComplStart(void);
@@ -80,6 +85,7 @@ signals:
     void runProc_doorCBinAndAllDoorsClosed(void);
     void runProc_doorAllDoorsClosed(void);
 
+    void runProc_coinAttached();
 };
 
 

lib_ca_master/lib_ca_master.pro

@@ -5,14 +5,12 @@ VERSION="1.0.1"
 HEADERS += \
     ../include/com.h \
     ../include/datIf.h \
-    ../include/prot.h \
-    ../include/download_thread.h
+    ../include/prot.h
 
 SOURCES += \
     ../src/com.cpp \
     ../src/datIf.cpp \
-    ../src/prot.cpp \
-    ../src/download_thread.cpp
+    ../src/prot.cpp
 
 include(../DCLibraries.pri)
 

lib_ca_slave/lib_ca_slave.pro

@@ -2,12 +2,6 @@ TEMPLATE = lib
 TARGET = CAslave
 VERSION="1.0.1"
 
-HEADERS += \
-    ../include/reporting_thread.h
-
-SOURCES += \
-    ../src/reporting_thread.cpp
-
 include(../DCLibraries.pri)
 
 win32 {

src/download_thread.cpp

@@ -0,0 +1,320 @@
+#include "download_thread.h"
+#include "shared_mem_buffer.h"
+#include "hwapi.h"
+
+#include <QDebug>
+#include <QDateTime>
+
+
+DownloadThread::DownloadThread(hwinf *hw)
+  : m_hw(hw)
+  , m_fileToDownload(m_hw->dcDownloadFileName()) {
+    // connect(this, &QThread::finished,
+    //        dynamic_cast<QObject const *>(m_hw), &QThread::deleteLater);
+}
+
+DownloadThread::~DownloadThread() {
+}
+
+/*
+ ///////////////////////////////////////////////////////////////////////////////
+ //
+ //                        USING THE DC BOOTLOADER
+ //
+ ///////////////////////////////////////////////////////////////////////////////
+
+ 1  :   bl_reboot()     // send to application, want DC2 to reset (in order to
+                        // start the bootloader)
+                        //
+                        // NOTE: this function is NOT reliable !!! Sometimes it
+                        // simply does not work, in which case bl_startBL,
+                        // bl_checkBL and bl_isUp do not work as well.
+                        // Alas, there is no feedback if bl_reboot worked!
+                        //
+                        // NOTE: this function can be called only once per
+                        // minute, because once called again, the controller
+                        // performs some self-checks consuming some time.
+                        //
+                        // NOTE: after a successful bl_reboot(), the device is
+                        // waiting about 4 seconds in the bootloader. To stay in
+                        // the bootloader, we have to send the command
+                        // bl_startBL(), which is kind of a misnomer, as it
+                        // should be bl_doNotLeaveBL().
+                        //
+ 2  :   bl_startBL():   // send within 4s after DC power-on, otherwise
+                        // bootloader is left.
+                        //
+                        // NOTE: a running bootloader is a MUST for the download
+                        // process of a device controller firmware as it does
+                        // the actual writing of the memory (the bl_reboot()
+                        // from above erases the available memory).
+                        //
+ 3  :   bl_check():     // send command to verify if bl is up
+                        //
+                        // NOTE: this command is kind of a request that we want
+                        // to check if the bootloader is up. The device
+                        // (actually the bootloader) responds with its version.
+                        //
+ 4  :   bl_isUp():      // returns true if bl is up and running
+                        //
+                        // NOTE: we know what the bootloader version actually is
+                        // as the bootloader does not change. By comparing the
+                        // string received in the previous step with this known
+                        // version string we know if the bootloader is up.
+                        //
+                        // NOTE FOR ALL PREVIOUS STEPS: execute them in their
+                        // own slots each to be sure to receive any possible
+                        // responds from the device.
+                        //
+ 5  :   bl_sendAddress(blockNumber)
+                        // send start address, nr of 64-byte block, start with 0
+                        // will be sent only for following block-numbers:
+                        // 0, 1024, 2048, 3072 and 4096, so basically every
+                        // 64kByte.
+                        // for other addresses nothing happens
+
+ 6  :   bl_wasSendingAddOK()
+                        // return val:  0: no response by now
+                        //              1: error
+                        //             10: OK
+
+ 7  :   bl_sendDataBlock()
+                        // send 64 byte from bin file
+
+ 8  :   bl_sendLastBlock()
+                        // send this command after all data are transferred
+
+ 9  :   bl_wasSendingDataOK()
+                        // return val:  0: no response by now
+                        //              1: error
+                        //             10: OK
+
+ 10 :   bl_stopBL()     // leave bl and start (the new) application
+                        //
+                        // NOTE: this function MUST work under all conditions.
+                        // Alas, there is no direct result for this command, so
+                        // the only way of knowing it was successful is to ask
+                        // the device if the bootloader is still running.
+                        // There is no problem to repeat this command until the
+                        // bootloader is really not running anymore.
+ */
+void DownloadThread::run() {
+    // download thread running in ca-master sends the dc-file down to firmware
+    // TODO: send the json files as well
+
+    m_hw->dcDownloadRequestAck();
+
+    qCritical() << "DownloadThread::run(): DOWNLOAD THREAD STARTED";
+
+    // load binary device controller file into memory
+    QByteArray ba = loadBinaryDCFile(m_hw->dcDownloadFileName());
+    if (ba.size() > 0) {
+        uint16_t const totalBlocks = (((ba.size())%64)==0) ? (ba.size()/64) : (ba.size()/64)+1;
+        m_hw->dcDownloadSetTotalBlockNumber(totalBlocks);
+
+        // fill last block of data to be sent with 0xFF
+        ba = ba.leftJustified(totalBlocks*64, (char)(0xFF));
+
+        resetDeviceController();
+        if (startBootloader()) {
+
+            qCritical() << "DownloadThread::run(): TOTAL NUMBER OF BYTES TO SEND TO DC" << ba.size();
+            qCritical() << "DownloadThread::run(): TOTAL NUMBER OF BLOCKS" << totalBlocks;
+
+            int currentBlock = 0;
+            DownloadResult res = DownloadResult::OK;
+            qCritical() << "64-byte block " << currentBlock;
+            while (res != DownloadResult::ERROR &&  currentBlock < totalBlocks) {
+                if ((res = sendNextAddress(currentBlock)) != DownloadResult::ERROR) {
+                    if ((res = sendNextDataBlock(ba, currentBlock)) != DownloadResult::ERROR) {
+                        m_hw->dcDownloadSetCurrentBlockNumber(currentBlock);
+                        currentBlock += 1;
+                    }
+                }
+            }
+
+            qCritical() << "DownloadThread::run(): last 64-byte block %04d" << currentBlock;
+
+            int const rest = ba.size() % 64;
+            int const offset = ba.size() - rest;
+            char const *startAddress = ba.constData() + offset;
+
+            if (rest > 0) {
+                // SHOULD NEVER HAPPEN !!!
+                uint8_t local[66];
+                memset(local, 0xFF, sizeof(local));
+                memcpy(local, startAddress, rest);
+                qCritical() << "DownloadThread::run(): ERROR SEND REMAINING" << rest << "BYTES";
+                m_hw->bl_sendDataBlock(64, local);
+            } else {
+                m_hw->bl_sendLastBlock();
+                m_hw->dcDownloadSetCurrentBlockNumber(currentBlock);
+            }
+            qCritical() << "DownloadThread::run(): last result" << (int)sendStatus(m_hw->bl_wasSendingDataOK());
+        }
+        stopBootloader();   // there is no harm in stopping the bootloader even
+    }                       // if it was not started at all
+
+#if 0
+    // test code:
+    uint16_t const totalBlocks = 100;
+    m_hw->dcDownloadSetTotalBlockNumber(totalBlocks);
+
+    for (uint16_t currentBlock = 0; currentBlock <= totalBlocks; ++currentBlock) {
+        m_hw->dcDownloadSetCurrentBlockNumber(currentBlock);
+        QThread::msleep(100);
+    }
+#endif
+
+    m_hw->dcDownloadSetRunning(false);
+    m_hw->dcDownloadSetFinished(true);
+
+    qCritical() << QDateTime::currentDateTime().toString(Qt::ISODate) + "DOWNLOAD THREAD FINISHED";
+
+    // the object deletes itself ! This is the last line in run().
+    // Never touch the object after this statement
+    // m_hw->dcDownloadThreadFinalize(this);
+}
+
+DownloadThread::DownloadResult DownloadThread::sendStatus(int ret) const {
+    switch (ret) {                  // return values of dc are:
+    case 0:                         // 0: no answer by now
+        return DownloadResult::NOP; // 1: error
+    case 10:                        // 10: success
+        return DownloadResult::OK;
+    default:;
+    }
+    return DownloadResult::ERROR;
+}
+
+DownloadThread::DownloadResult
+DownloadThread::sendNextAddress(int bNum) const {
+    // sends address only if blockNumber is one of 0, 1024, 2048, 3072, 4096
+    int noAnswerCount = 0;
+    int errorCount = 0;
+    if ( bNum==0 || bNum==1024 || bNum==2048 || bNum==3072 || bNum==4096 ) {
+        // qDebug() << "addr-block" << bNum << "...";
+        while (noAnswerCount <= 250) {
+            m_hw->bl_sendAddress(bNum);
+            QThread::msleep(100);
+            DownloadResult const res = sendStatus(m_hw->bl_wasSendingAddOK());
+            if (res != DownloadResult::NOP) {
+                if (res == DownloadResult::ERROR) {
+                    if (++errorCount >= 10) {
+                        qCritical() << "addr-block" << bNum << "...FAILED";
+                        return res;
+                    }
+                } else { // res == DownloadResult::OK
+                    // qInfo() << "addr-block" << bNum << "...OK";
+
+                        // TODO: hier ins shared-mem schreiben
+
+                    return res;
+                }
+            } else {
+                noAnswerCount += 1; // no answer by now
+            }
+        }
+        // wait max. about 3 seconds
+        return DownloadResult::TIMEOUT;
+    }
+    // blockNumber is not one of 0, 1024, 2048, 3072, 4096 -> do nothing
+    return DownloadResult::NOP;
+}
+
+DownloadThread::DownloadResult
+DownloadThread::sendNextDataBlock(QByteArray const &binary, int bNum) const {
+    uint8_t local[66];
+    int const bAddr = bNum * 64;
+    int noAnswerCount = 0;
+    int errorCount = 0;
+
+    memcpy(local, binary.constData() + bAddr, 64);
+    local[64] = local[65] = 0x00;
+
+    // QByteArray b((const char *)(&local[0]), 64);
+    // qCritical() << "SNDB" << bNum << b.size() << b.toHex();
+
+    while (noAnswerCount <= 250) {
+        m_hw->bl_sendDataBlock(64, local);
+        QThread::msleep(10);
+        DownloadResult const res = sendStatus(m_hw->bl_wasSendingDataOK());
+        if (res != DownloadResult::NOP) {
+            if (res == DownloadResult::ERROR) {
+                if (++errorCount >= 10) {
+                    qCritical() << "data for block" << bNum << "...FAILED";
+                    return res;
+                }
+            } else {
+                // qInfo() << "data for block" << bNum << "OK";
+
+                    // TODO: hier ins shared mem schreiben
+
+                return res;
+            }
+        } else {
+            noAnswerCount += 1; // no answer by now
+        }
+    }
+    // wait max. about 3 seconds
+    return DownloadResult::TIMEOUT;
+}
+
+bool DownloadThread::startBootloader() const {
+    qDebug() << "starting bootloader...";
+    int nTry = 5;
+    while (--nTry >= 0) {
+        m_hw->bl_startBL();
+        QThread::msleep(5000);
+        m_hw->bl_checkBL();
+        if (m_hw->bl_isUp()) {
+            qInfo() << "starting bootloader...OK";
+            QThread::msleep(5000);
+            return true;
+        } else {
+            qCritical() << "bootloader not up (" << nTry << ")";
+        }
+    }
+    qCritical() << "starting bootloader...FAILED";
+    return false;
+}
+
+bool DownloadThread::stopBootloader() const {
+    qDebug() << "stopping bootloader...";
+    int nTry = 5;
+    while (--nTry >= 0) {
+        m_hw->bl_stopBL();
+        QThread::msleep(500);
+        if (!m_hw->bl_isUp()) {
+            qInfo() << "stopping bootloader...OK";
+            return true;
+        }
+    }
+    qCritical() << "stopping bootloader...FAILED";
+    return false;
+}
+
+bool DownloadThread::resetDeviceController() const {
+    qDebug() << "resetting device controller...";
+    m_hw->bl_rebootDC();
+    // wait maximally 3 seconds, before starting bootloader
+    QThread::sleep(1);
+    qInfo() << "resetting device controller...OK";
+    return true;
+}
+
+QByteArray DownloadThread::loadBinaryDCFile(QString filename) const {
+    qDebug() << "loading dc binary" << filename << "...";
+
+    QFile file(filename); // closed in destructor call
+    if (!file.exists()) {
+        qCritical() << file.fileName() << "does not exist";
+        return QByteArray();
+    }
+    if (!file.open(QIODevice::ReadOnly)) {
+        qCritical() << "cannot open file" << file.fileName();
+        return QByteArray();
+    }
+    qInfo() << "loading dc binary" << filename << "...OK";
+    return file.readAll();
+}

src/hwapi.cpp

@@ -128,8 +128,7 @@ hwapi::hwapi(QWidget *parent) : QObject(parent)
     connect(runProcess, SIGNAL(runProc_doorCoinBoxInserted()),          this, SLOT(sub_slotCoin14())); // hwapi_doorCoinBoxInserted()));
     connect(runProcess, SIGNAL(runProc_doorCBinAndAllDoorsClosed()),    this, SLOT(sub_slotCoin15())); // hwapi_doorCBinAndAllDoorsClosed()));
     connect(runProcess, SIGNAL(runProc_doorAllDoorsClosed()),           this, SLOT(sub_slotCoin16())); // hwapi_doorAllDoorsClosed()));
-
-
+    connect(runProcess, SIGNAL(runProc_coinAttached()),                 this, SLOT(coinAttached()));
 }
 
 void hwapi::hwapi_slotPayProc(void)
@@ -227,6 +226,9 @@ void hwapi::sub_slotCoin16(void)
     emit hwapi_doorAllDoorsClosed();
 }
 
+void hwapi::coinAttached() {
+    emit hwapi_coinAttached();
+}
 
 
 /*
@@ -3332,22 +3334,15 @@ void hwapi::sys_restoreDeviceParameter(struct T_devices *deviceSettings) const
     // attention: only applies if function "sys_sendDeviceParameter()" was used to send this settings before
     //          cannot be used to see settings programmed by JsonFile
     uint8_t buf[64];
-    uint8_t LL, nn;
+    uint8_t LL;
     tslib_strclr(buf,0,64);
-    uint8_t *start;
 
     //runProcess->epi_restore64BdevParameter(&LL, buf); // wozu die???
     epi_restoreRbDeviceSettings(&LL, buf);      // viel besser, stimmt immer
 
-    // Puffer in struct eintragen:
-    start = &deviceSettings->kindOfPrinter;
-    nn=0;
-    do
-    {
-        *start = buf[nn];
-        start++;
-    } while(++nn<LL);
+    Q_STATIC_ASSERT(sizeof(*deviceSettings) <= sizeof(buf));
 
+    memcpy(deviceSettings, buf, sizeof(*deviceSettings));
 }
 
 bool hwapi::sys_areDCdataValid(void) const

src/main.cpp

@@ -18,11 +18,11 @@ int main(int argc, char *argv[])
 #include <stdio.h>
 
 // Must define the interpreter to be the dynamic linker
-#ifdef __LP64__
-#error "__LP64__ not defined for PTU5"
-#else
-const char service_interp[] __attribute__((section(".interp"))) = "/lib/ld-linux-armhf.so.3";
-#endif
+//#ifdef __LP64__
+//#error "__LP64__ not defined for PTU5"
+//#else
+//const char service_interp[] __attribute__((section(".interp"))) = "/lib/ld-linux-armhf.so.3";
+//#endif
 
 
 int main(int argc, char *argv[]) {

src/reporting_thread.cpp

@@ -0,0 +1,155 @@
+#include "reporting_thread.h"
+#include "shared_mem_buffer.h"
+#include "hwapi.h"
+
+#include <QDateTime>
+#include <QDebug>
+
+ReportingThread::ReportingThread(hwapi *hw)
+  : m_hw(hw)
+  , m_fileToDownload(m_hw->dcDownloadFileName()) {
+}
+
+ReportingThread::~ReportingThread() {
+}
+
+// download thread running in ca-slave sends reports of download process to
+// each component which has connects for the corresponding signals.
+void ReportingThread::run() {
+
+    qCritical() << QDateTime::currentDateTime() << "START DOWNLOAD THREAD";
+
+    static QString report("");
+
+    int cnt = 5;
+    while (!m_hw->dcDownloadGetRunning()) {
+        if (--cnt > 0) {
+            report =  QString("%1 waiting for download to start %2")
+                            .arg(QDateTime::currentDateTime().toString(Qt::ISODate))
+                            .arg(cnt);
+            qCritical() << __LINE__ << "STATUS" << report;
+            emit m_hw->hwapi_reportDCDownloadStatus(report);
+            QThread::sleep(1);
+        } else break;
+    }
+
+#if 0
+    if (cnt == 0) {
+        m_hw->dcDownloadResetRequest();
+        status = QString("%1 reset download request")
+                        .arg(QDateTime::currentDateTime().toString(Qt::ISODate));
+        qCritical() << __LINE__ << "STATUS" << status;
+        emit m_hw->hwapi_reportDCDownloadStatus(status);
+
+        cnt = 5;
+        while (!m_hw->dcDownloadRunning()) {
+            if (--cnt > 0) {
+                QThread::sleep(1);
+            } else break;
+        }
+
+        if (cnt == 0) {
+            status = QString("%1 download request failure")
+                            .arg(QDateTime::currentDateTime().toString(Qt::ISODate));
+            qCritical() << __LINE__ << "STATUS" << status;
+            emit m_hw->hwapi_reportDCDownloadFailure(status);
+            return;
+        }
+    }
+
+    uint16_t const tnr = 1750;
+    uint16_t cnr = 0;
+
+    while (cnr <= tnr) {
+        QThread::msleep(100);
+        QString report("");
+
+        if (cnr > 0) {
+            double percent = ((double)cnr / (double)tnr) * 100.0;
+            report = QString(": total blocks %1, current block %2 [%3]")
+                    .arg(tnr).arg(cnr).arg(percent, 0, 'f', 2);
+        } else {
+            report = QString(": total blocks %1, current block %2 [0]")
+                    .arg(tnr).arg(cnr);
+        }
+        status = QDateTime::currentDateTime().toString(Qt::ISODate) + report;
+
+        qCritical() << "STATUS" << status;
+
+        emit m_hw->hwapi_reportDCDownloadStatus(status);
+        cnr += 1;
+    }
+
+    if (tnr == cnr) {
+        m_hw->hwapi_reportDCDownloadSuccess(
+            QString("SUCCESS DOWNLOADING") + m_fileToDownload);
+    } else {
+        m_hw->hwapi_reportDCDownloadFailure(
+            QString("ERROR DOWNLOADING %1 (total blocks=%2, sent blocks=%3)")
+                .arg(m_fileToDownload).arg(tnr).arg(cnr));
+    }
+
+#endif
+
+    uint16_t const totalBlocks = m_hw->dcDownloadGetTotalBlockNumber();
+
+    qCritical() << QDateTime::currentDateTime() << "TOTAL BLOCKS" << totalBlocks;
+
+    if (totalBlocks) {
+        qint64 const start = QDateTime::currentMSecsSinceEpoch();
+        double durationMillis = 0;
+        uint16_t currentBlockNumber = 0;
+
+        while (m_hw->dcDownloadGetRunning()) {
+            currentBlockNumber = m_hw->dcDownloadGetCurrentBlockNumber();
+
+            durationMillis += QDateTime::currentMSecsSinceEpoch() - start;
+
+            double const timeAveragePerBlock = (currentBlockNumber > 0) ? (durationMillis / currentBlockNumber) : durationMillis;
+            double const estimatedSecondsLeft = (timeAveragePerBlock * (totalBlocks - currentBlockNumber)) / 1000.0;
+
+            double percent = ((double)currentBlockNumber / (double)totalBlocks) * 100.0;
+            report = QString(": total blocks %1, current block %2 [%3] (est. time left: %4s)")
+                        .arg(totalBlocks)
+                        .arg(currentBlockNumber)
+                        .arg(percent, 0, 'f', 2)
+                        .arg(estimatedSecondsLeft, 0, 'f', 2);
+
+            qCritical() << "RT report" << report;
+
+            emit m_hw->hwapi_reportDCDownloadStatus(report);
+            QThread::msleep(100);
+        }
+
+        QThread::msleep(100);
+
+        if (totalBlocks == currentBlockNumber) {
+            m_hw->hwapi_reportDCDownloadSuccess(
+                QString("SUCCESS DOWNLOADING") + m_fileToDownload);
+        } else {
+            m_hw->hwapi_reportDCDownloadFailure(
+                QString("ERROR DOWNLOADING %1 (total blocks=%2, sent blocks=%3)")
+                    .arg(m_fileToDownload).arg(totalBlocks).arg(currentBlockNumber));
+        }
+    }
+
+    qCritical() << QDateTime::currentDateTime() << __PRETTY_FUNCTION__
+                << QString("line=%1 REPORT THREAD ABOUT TO FINISH").arg(__LINE__);
+
+    cnt = 10;
+
+    bool running = m_hw->dcDownloadGetRunning();
+    bool finished = m_hw->dcDownloadGetFinished();
+
+    while (--cnt > 0 && (running && !finished)) {
+        qCritical() << QDateTime::currentDateTime() << __PRETTY_FUNCTION__
+                    << QString("line=%1 REPORT THREAD: WAIT FOR END OF DOWNLOAD THREAD %2 %3 (%4)")
+            .arg(__LINE__).arg(running).arg(finished).arg(cnt);
+        QThread::sleep(1);
+        running = m_hw->dcDownloadGetRunning();
+        finished = m_hw->dcDownloadGetFinished();
+    }
+
+    qCritical() << QDateTime::currentDateTime() << __PRETTY_FUNCTION__
+                << QString("line=%1 FINISH REPORT THREAD").arg(__LINE__);
+}

src/runProc.cpp

@@ -48,6 +48,16 @@ T_runProc::T_runProc()
 void T_runProc::runProc_slotProcess(void)
 {
 #ifndef THIS_IS_CA_MASTER
+    bool const coinAttached = epi_getDI_CoinAttach();
+    // exchange: (atomically) replaces the underlying value of m_coinAttached
+    // with the value of coinAttached, returns the value of m_coinAttached
+    // before the call
+    if (m_coinAttached.exchange(coinAttached) == false) {
+        if (coinAttached) {
+            // old value was false, and new value is true
+            emit runProc_coinAttached();
+        }
+    }
     cash_paymentProcessing();
     doors_supervise();
     bl_performComplStart();     // neu 1.12.23