loadRecDataFromFrame():

When reading next message, check readCount + 1 == writeCount. If not, there
	must be something wrong: ignore this message and set readCount <- writeCount.

include/com.h

@@ -7,6 +7,7 @@
 //#include <QString>
 #include <QTimer>
 #include <QSerialPort>
+#include <QVector>
 #include "tslib.h"
 #include "controlBus.h"
 #include "interfaces.h"
@@ -32,6 +33,8 @@ class T_com : public QObject        //,  public QPlainTextEdit
 //    QSerialPort *CatSerial = nullptr;
     QSerialPort *CatSerial;
 
+    uint32_t writeCount = 0;
+
     //char oeffneSerialPort();
     char open_Serial_Port();
     void closeSerialPort();
@@ -61,6 +64,8 @@ public:
     bool readFromSerial(QByteArray &data, uint16_t &sendLength);
         // retval: true: data available
 
+    uint32_t getWriteCount() { return writeCount; }
+
 /*
     uint8_t getAllPortPins(void);
         // rs232pins: all signals bitwise coded in one byte:

include/datIf.h

@@ -168,6 +168,9 @@ class T_datif : public QObject
     QTimer *datif_trigger;
     uint8_t selectedSlaveAddr;
 
+    bool waitForTestResponse = false;
+    uint32_t readCount = 0;
+
 private slots:
     char datif_cycleSend();
     void StoredRecData();

include/prot.h

@@ -122,6 +122,9 @@ public:
                            uint8_t  *RdDlen, uint8_t *receivedData);
         // retval: data valid, only one time true
 
+    uint16_t getReadSource() { return readSource; } // readSource contains last command sent to device controller
+    T_com *getSerialPort() { return mySerialPort; } // utility function
+
 
 signals:
     void framerecieved();   //bool gotINdata);

src/com.cpp

@@ -1,5 +1,6 @@
 #include "com.h"
 #include <QDebug>
+#include <QDateTime>
 //#include "controlBus.h"
 
 //////////////////////////////////////////////////////////////////////////////////
@@ -20,13 +21,53 @@ void T_com::writeToSerial(const QByteArray &data, uint16_t sendLength)
 {
     sendBuffer=data;
     sendLen=sendLength;
-    if (CatSerial->isOpen())
-    {
-        //qDebug() << "sending..." << sendBuffer;
-        CatSerial->write(sendBuffer);
-    } else
-        qDebug() << "error sending, port is not open";
 
+    // logic: exactly one command is sent to DC. no other command can be sent
+    // until the respond has been read from the serial line.
+
+    if (CatSerial->isOpen()) {
+        if (CatSerial->error() != QSerialPort::NoError) {
+            qCritical() << __func__ << "" << __LINE__ << "ERROR on serial line" << CatSerial->errorString();
+            CatSerial->clearError();
+            qCritical() << __func__ << "" << __LINE__ << "cleared error on serial line";
+        }
+
+        if (!CatSerial->atEnd()) {
+            qCritical() << QString("ERROR %1 bytes available on serial line before write").arg(CatSerial->bytesAvailable());
+            qCritical() << CatSerial->readAll().toHex(':');
+            CatSerial->clear();
+            qCritical() << __func__ << "" << __LINE__ << "read all data from serial line";
+        }
+
+        CatSerial->clear();
+
+        QByteArray buffer(data);
+        int bytesToWrite = buffer.size();
+        while (bytesToWrite > 0 && !buffer.isEmpty()) {
+            int bytesWritten = CatSerial->write(buffer);
+            if (bytesWritten != -1) {
+                bytesToWrite -= bytesWritten;
+                buffer = buffer.right(bytesWritten);
+            } else {
+                qCritical() << __func__ << ":" << __LINE__
+                            << QString("ERROR %1 for sending %2").arg(CatSerial->errorString()).arg(data.toHex(':').constData());
+                CatSerial->clearError();
+                qCritical() << __func__ << ":" << __LINE__ << "cleared error on serial line. returning ...";
+                return;
+            }
+        }
+
+        CatSerial->flush();
+        writeCount += 1;
+
+        // only for debugging
+        // qCritical() << __func__ << ":" << __LINE__ << QDateTime::currentDateTime().time().toString(Qt::ISODateWithMs)
+        //            << "write cmd" << (unsigned int)data.constData()[2];
+
+    } else {
+        qCritical() << __func__ << ":" << __LINE__
+                    << "ERROR sending" << data.toHex(':') << "port is not open";
+    }
 }
 
 
@@ -82,6 +123,7 @@ T_com::T_com(QObject *parent) : QObject(parent)
     ChkConnectTimer->setSingleShot(false);
     ChkConnectTimer->start(100);     // in ms
     com_want2read=0;
+    writeCount = 0;
 }
 
 

src/datIf.cpp

@@ -6,10 +6,12 @@ History:
 
 */
 #include "datIf.h"
+#include "hwapi.h"
 #include "sendWRcmd.h"
 #include "controlBus.h"
 #include "storeINdata.h"
 #include <QDebug>
+#include <QDateTime>
 #include <datei.h>
 #include <QDir>
 
@@ -124,6 +126,7 @@ T_datif::T_datif(QObject *parent) : QObject(parent)
     datif_pNextCmd=0;
     datif_sendSlowCmd=0;
 
+    readCount = 0;
 }
 
 void T_datif::resetChain(void)
@@ -400,7 +403,7 @@ char T_datif::sendINrequestsAutomatic(void)
     uint8_t datif_maxNrCommands=35, datif_sendNow;
 
     // send quicker while transaction is ongoing:
-    uint8_t datif_vendRequCommandList[15]={102,107,108,110,112,115,116,31,32,40,41,42,23,0,0};
+    uint8_t datif_vendRequCommandList[15]={102,107,108,110,112,115,116,30,31,32,40,41,42,23,0};
     uint8_t datif_maxVendingCmds=13;
 
     // special commands:
@@ -513,6 +516,8 @@ char T_datif::loadRecDataFromFrame()
         return 0;
     }
 
+    memset(receivedData, 0x00, sizeof(receivedData));
+
     ret=myDCIF->getReceivedInData(&SlaveAdr, &readSource, &readAddress,  &RdDleng, receivedData);
         // nur true wenn CommandState OK und readState OK
 
@@ -545,6 +550,30 @@ char T_datif::loadRecDataFromFrame()
 
     gpi_storeRecPayLoad(RdDleng, receivedData); //  save for host (user of hwapi)
 
+    if (myDCIF && myDCIF->getSerialPort()) {
+        uint32_t writeCount = myDCIF->getSerialPort()->getWriteCount();
+        if ((readCount + 1) == writeCount) { // there can be only one command sent to the DC
+            readCount = writeCount;
+            if (readSource != myDCIF->getReadSource()) {
+                qCritical() << __func__ << ":" << __LINE__ << ": ERROR length" << RdDleng << ", ignore data"
+                            << QByteArray((char const *)receivedData, RdDleng).toHex(':');
+                qCritical() << __func__ << ":" << __LINE__ << "would be interpretated as" << readSource << myDCIF->getReadSource();
+                return 0;
+            } else {
+                // only for debugging
+                // qCritical() << __func__ << ":" << __LINE__ << QDateTime::currentDateTime().time().toString(Qt::ISODateWithMs) << readSource << myDCIF->getReadSource();
+            }
+        } else {
+            qCritical() << __func__ << ":" << __LINE__ << QString(": ERROR readCount + 1 != writeCount: %1 != %2").arg(readCount + 1).arg(writeCount);
+            qCritical() << __func__ << ":" << __LINE__ << ": ERROR length" << RdDleng << ", ignore data"
+                        << QByteArray((char const *)receivedData, RdDleng).toHex(':');
+            qCritical() << __func__ << ":" << __LINE__ << "would be interpretated as" << readSource << myDCIF->getReadSource();
+
+            readCount = writeCount;
+            return 0;
+        }
+    }
+
     // uint8_t nn;
     //qDebug() << "\n datif: got valid data, rdsrc:" << readSource << "  rdadd:" << readAddress
      //        << "  rdlen:" << RdDleng;
@@ -1012,18 +1041,24 @@ char T_datif::loadRecDataFromFrame()
         uit2=uchar2uint(receivedData[7],receivedData[6]);  //  value of last coin
         //if (uitmp>0) // nur 1x bei neuer Münze  6.10.23 aendern:
                         // beim Wechsler hat die kleinste Muenze immer coin type 0!
+
         if (uitmp>10000 || uit2>10000)
         {
             uitmp=0;
             uit2=0;
         }
-        if ((newInsertedAmount != lastInsertedAmount) || uit2>0 )
+
-        {
+        if (uit2==3 || uit2==5 || uit2==10 || uit2==20 || uit2==50 || uit2==100 || uit2==200 || uit2==500)
-            gpi_storeCurrentPayment(newInsertedAmount, uitmp, uit2);
+         {
-            emit datif_gotNewCoin();    // OR BILL  if (uitmp & 0x8000)>0
+            // valid coin
-            //qDebug()<<"emit new coin";
+            if ((newInsertedAmount != lastInsertedAmount) || uit2>0 )
-            lastInsertedAmount=newInsertedAmount;
+            {
-            //qCritical()<<"datif 112 store and emit new coin "<<newInsertedAmount<<" "<<uitmp<<" "<<uit2;
+                gpi_storeCurrentPayment(newInsertedAmount, uitmp, uit2);
+                emit datif_gotNewCoin();    // OR BILL  if (uitmp & 0x8000)>0
+                //qDebug()<<"emit new coin";
+                lastInsertedAmount=newInsertedAmount;
+                //qCritical()<<"datif 112 store and emit new coin "<<newInsertedAmount<<" "<<uitmp<<" "<<uit2;
+            }
         }
 
         break;

src/hwapi.cpp

@@ -56,7 +56,7 @@ hwapi::hwapi(QObject *parent) : QObject(parent)
 #error "SLAVE LIB COMPILED INTO MASTER"
 #endif
 
-        myDatif = new T_datif();    // für die  CAslave-Lib auskommentieren!
+        myDatif = new T_datif(this);    // für die  CAslave-Lib auskommentieren!
 
 #endif
 

src/prot.cpp

@@ -368,6 +368,9 @@ uint8_t recBuffer[FRAME_MAXLEN];
     // read from "VCP":
     mySerialPort->readFromSerial(Indata, recLength);
 //qDebug()<<"prot: got data " << recLength;
+
+    memset(recBuffer, 0x00, sizeof(recBuffer));
+
     if (recLength>FRAME_MAXLEN)
         recLength=FRAME_MAXLEN;
     for (int nn=0; nn<recLength; nn++)