DCLibraries/include/storeINdata.h

#ifndef STOREINDATA_H
#define STOREINDATA_H

#include <stdint.h>
#include "tslib.h"
#include <QString>


#define MAXNROF_AO              3
#define MAXNROF_GENSTR          16
#define MAXNROF_CONTR_PORTS     11
#define MAXNROF_DIports         2
#define MAXNROF_DOports         2
#define MAXNROF_CTR             2
#define MEASCHAN_TEMPERATURE    0
#define MEASCHAN_VOLTAGE        1


// gpi: DC-driver stores data for graphic peripheral interface
// epi: gui reads values from external peripheral interface


// store power on/off condition of the devices to control the data request

void indat_storePrinterPower(bool isOn);
bool indat_isPrinterOn();

void indat_storeMifarePower(bool isOn);
bool indat_isMifareOn();

void indat_storeMDBisOn(bool isOn);
bool indat_isMdbOn();

void gpi_storeHWver(QString text);
QString epi_loadHWver(void);

void gpi_storeSWver(QString text);
QString epi_loadSWver(void);

void gpi_storeDCstate(QString text);
QString epi_loadDCstate(void);


void gpi_storeUID(uint8_t const *buf8byteUid);
//void gpi_storeUID(uint8_t *buf8byteUid);
// buffer size: 8 byte

void epi_getUIDdec(uint8_t *buf8byteUid);
// buffer size: 8 byte

QString epi_getUIDstr();





// ///////////////////////////////////////////////////////////////////////////////////
//          Time and Date
// ///////////////////////////////////////////////////////////////////////////////////

uint8_t epi_getSquareMode();
void gpi_backupSquareMode(uint8_t squMode);

void gpi_backupTime(uint8_t *timeBuffer, uint8_t Leng);     // 104, <=8byte
void epi_getTime(uint8_t *hh, uint8_t *mm, uint8_t *ss);
void epi_getDate(uint8_t *yy, uint8_t *mm, uint8_t *dd);
void epi_getToday(uint8_t *dow, uint16_t *minOfToday, uint32_t *secOfToday);
bool epi_isLeapYear(uint8_t *lastLeapYear, uint8_t *NextLeapYear);
bool epi_isLeapYear();
void epi_getSpecialWeekTimeDate(uint8_t *DayOfWeek, uint8_t *HoursOfWeek, uint16_t *MinutesOfWeek);
void epi_getSpecialMonthTimeDate(uint8_t *DayOfMonth, uint16_t *HoursOfMonth, uint16_t *MinutesOfMonth);
void epi_getSpecialYearTimeDate(uint16_t *DayOfYear, uint16_t *HoursOfYear, uint32_t *MinutesOfYear);


// ///////////////////////////////////////////////////////////////////////////////////
//          Analog values
// ///////////////////////////////////////////////////////////////////////////////////


void gpi_storeAIs(uint8_t aiNr, uint16_t val);   // rs -> Sdata

uint8_t gpi_getMaxNrAIs();

uint16_t epi_loadAIs(uint8_t aiNr);              //       Sdata -> gui
    // return value of one ADC with channel nr: aiNr 0...15

uint32_t epi_loadMeasureValue(uint8_t ValueNr);
    // ValueNr 0=ADC0, 1=ADC1 aso...

void gpi_storeMeasureValue(uint8_t ValueNr, uint32_t val);
    // in mV, also bis 65,535V

QString epi_getSlaveTemperatureStr();

QString epi_getSlaveVoltageStr();
    // value in "meas_volt" in mV, also bis 65,535V. Value range [6000...16000] (6V...16V)

// ///////////////////////////////////////////////////////////////////////////////////
//          digital inputs
// ///////////////////////////////////////////////////////////////////////////////////

void gpi_storeDI_doorSwitches(uint8_t upperDoor, uint8_t lowerDoor, uint8_t vaultDoor);

uint8_t epi_getDI_doorSwitches(void);
    // bit0: upper door  1: low door  2:vault door

void gpi_storeDI_vaultSwitches(uint8_t CashBoxIn, uint8_t BillBoxIn);

uint8_t epi_getDI_vaultSwitches(void);
    // bit0: cash box    1: bill box in

void gpi_storeDI_lockSwitches(uint8_t indatUL, uint8_t indatLL);
    // D5: bit 0: upper lockbar up   bit1:down
    // D6: bit 0: lower lockbar up   bit1:down

uint8_t epi_getDI_lockSwitches(void);
    // retval: bit 0: upper lockbar up   bit1: upper lockbar is down
    //         bit 2: lower lockbar up   bit1: lower lockbar is down


void gpi_storeDI_optos(uint8_t indatOpto);
    // OptoIn bit 0,1: optoin 1,2

uint8_t epi_getDI_optos(void);
    // bit0: opto in 1    1: opto in 2

void gpi_storeDI_auxIn(uint8_t indatAuxIn);
    // Aux0...5

uint8_t epi_getDI_auxIn(void);
    // bit0: auxin 1  ...  5: auxin 6

void gpi_storeDI_ptuWake(uint8_t indat);

bool epi_getDI_ptuWake(void);

void gpi_storeDI_mbdWake(uint8_t indat);

bool epi_getDI_mdbWake(void);

void gpi_storeDI_prnReady(uint8_t indat);

bool epi_getDI_prnReady(void);

void gpi_storeDI_CoinAttach(uint8_t indat);

bool epi_getDI_CoinAttach(void);

void gpi_storeDI_CoinEscrow(uint8_t indat);

bool epi_getDI_CoinEscrow(void);

void gpi_storeDI_mifareCardTapped(uint8_t indat);

bool epi_getDI_mifareCardTapped(void);

void gpi_storeDI_modemWake(uint8_t indat);

bool epi_getDI_modemWake(void);


void gpi_storeDI_contactPowerIsOn(bool di_contact_PwrOn);

bool epi_getDI_contactPwr(void);

void gpi_storeDI_MifarePowerIsOn(bool di_mifare_PwrOn);

bool epi_getDI_mifarePwr(void);

void gpi_storeDI_readbackMdbTxD(bool di_rdbkMdbTxd);

bool epi_getDI_mdbTxd(void);

void gpi_storeDI_AuxPowerIsOn(bool di_Aux_PwrOn);

bool epi_getDI_auxPwr(void);

void gpi_storeDI_GsmPowerIsOn(bool di_gsm_PwrOn);

bool epi_getDI_gsmPwr(void);

void gpi_storeDI_CreditPowerIsOn(bool di_credit_PwrOn);

bool epi_getDI_creditPwr(void);

void gpi_storeDI_PrinterPowerIsOn(bool di_printer_PwrOn);

bool epi_getDI_printerPwr(void);

void gpi_storeDI_MdbPowerIsOn(bool di_mdb_PwrOn);

bool epi_getDI_mdbPwr(void);


void gpi_storeDI_rejMot_home(bool di);

bool epi_getDI_rejectMotor_homepos(void);

void gpi_storeDI_paperLow(uint8_t di);

uint8_t epi_getDI_npe_sensor(void);
    // 0: Sensor sees paper 1: no paper 99: off
















// ///////////////////////////////////////////////////////////////////////////////////
//          readback digital outputs
// ///////////////////////////////////////////////////////////////////////////////////

void gpi_storeDO_mdbRxTst(uint8_t do_mbdRxTst);

bool epi_getDO_mdbRxTestOut(void);


void gpi_storeDO_motorOutputs(uint8_t Pwr);

uint8_t epi_getDO_motorOuts(void);
    // bit0: upper lock forward    bit 1 backward
    // bit2: lower lock forward    bit 3 backward


void gpi_storeDO_serialSwitch(uint8_t state);
    // serial drv on/off, Serial mux1, Serial mux2

uint8_t epi_getDO_serialSwitch(void);
    // serial drv on/off, Serial mux1, Serial mux2

bool epi_getDO_serialDriverIsOn(void);

bool epi_getDO_serialMux1isSetToPrinter(void);
    // mux1 off: serial is switched to printer

bool epi_getDO_serialMux1isSetToModem(void);
    // mux1 on: serial is switched to modem

bool epi_getDO_serialMux2isSetToCredit(void);
    // mux2 off: serial is switched to credit card terminal

bool epi_getDO_serialMux2isSetToMifare(void);
    // mux2 on: serial is switched to mifare reader


void gpi_storeDO_ledsAndFan(uint8_t ledState);

bool epi_getDO_led_coin(void);

bool epi_getDO_led_front(void);

bool epi_getDO_led_ticket(void);

bool epi_getDO_led_pin(void);

bool epi_getDO_led_start(void);

bool epi_getDO_led_inside(void);

bool epi_getDO_fan(void);

void gpi_storeDO_sirenAndRelay(uint8_t sirenRelay);

bool epi_getDO_sirene(void);

bool epi_getDO_relay(void);

void gpi_storeDO_ptuWake(uint8_t state);

bool epi_getDO_ptuWake(void);

void gpi_storeDO_auxPower(uint8_t pwr);

bool epi_getDO_auxPower(void);


void gpi_storeDO_coinShutter(uint8_t state);

bool epi_getDO_coinShutterOpen(void);

bool epi_getDO_coinShutterTest(void);


void gpi_storeDO_coinEscrow(uint8_t state);

uint8_t epi_getDO_coinEscrow(void);
    // retval: 1:return flap is open   2:take flap is open    0:closed


void gpi_storeDO_printerPwrOn(uint8_t state);

uint8_t epi_getDO_printerPwr(void);



// ---------------------------------------------------------------------------------------------
// counterchecks, make sure that DC-outputs are correct

/*
bool epi_cntchk_wakePtu(void);
bool epi_cntchk_enabDrv01(void);        // no communication possible if 0 !!!!!
bool epi_cntchk_swRs1toModem(void);
bool epi_cntchk_modemWake(void);
bool epi_cntchk_enabDrv2(void);
bool epi_cntchk_swRs2toMIF(void);

bool epi_cntchk_shutterIsOpen(void);
    // counter check if shutter is really open,  PJ4 must be OUT and HIGH, PB5 must be OUT and HIGH
    // retval TRUE: shutter is open   FALSE: shutter is closed

bool epi_cntchk_escrowReturnIsOpen(void);
bool epi_cntchk_escrowTakeIsOpen(void);
bool epi_cntchk_aux1DirOut(uint8_t auxNr);
bool epi_cntchk_aux1OutHigh(uint8_t auxNr);

bool epi_cntchk_ledPaperOn(void);
bool epi_cntchk_ledPinpadOn(void);
bool epi_cntchk_ledStartOn(void);
bool epi_cntchk_ledServiceOn(void);
bool epi_cntchk_ledCoinOn(void);
bool epi_cntchk_ledIllumOn(void);
bool epi_cntchk_FanOn(void);
bool epi_cntchk_RelaisOn(void);
bool epi_cntchk_LaermOn(void);
bool epi_cntchk_Mot1Ron(void);
bool epi_cntchk_Mot1Fon(void);
bool epi_cntchk_Mot2Ron(void);
bool epi_cntchk_Mot2Fon(void);
*/


// ------------------------------------------------------------------------------------
// MDB Sendind Data  are store here for next transport to DC (Device Controller)
// Transport to Slave runs every 100ms, answer from mdb-slave (e.g. coin changer) comes right
// with next slave answer

// start with: SENDDIRCMD_EXCHGMDB,
    // send crude data from here to DC, DC to mdb slaves, mdb answer, return here within 50ms

uint8_t gpi_storeMdbRecData(uint8_t length, uint8_t *buf);
    // datif store received mdb data

uint8_t epi_getMdbResponse(void);
     // 0=no response  1=ACK  2=NAK  3=ACK with data

uint8_t epi_getMdbRecLength(void);
    // 0...31

uint8_t epi_restoreMdbRecData(uint8_t *buf);
    // hwapi reads received mdb data from PI





void gpi_clearMifHwData(void);

void gpi_storeMifHwData(uint8_t *receivedData);
    // blkNr=0...11    receivedData[64]

uint8_t epi_restoreMifHwData(uint8_t *buf, uint8_t maxBufferSize);
    // blkNr=0...11    return buf[64]
    // retval: 1=error 0=OK


void gpi_clearMifAtbData(void);

void gpi_storeMifAtbData(uint8_t *receivedData);

uint8_t epi_restoreMifAtbData( uint8_t *buf, uint8_t maxBufferSize);



void epi_restorePrinterState(uint8_t *buf);

void gpi_storePrinterState(uint8_t *buf);

void epi_restorePrinterFonts(uint8_t *buf);

void gpi_storePrinterFonts(uint8_t *buf);




void gpi_storeMdbState(uint8_t busReady, uint8_t V12on, uint8_t V5on );

bool epi_restoreMdbBusReady(void);

bool epi_restoreMdbV12Ready(void);

bool epi_restoreMdbV5Ready(void);


void gpi_storeMdbResponse(uint8_t leng, uint8_t *data);

void epi_restoreMdbResponse(uint8_t *leng, uint8_t *data);
    // last received mdb answer (from mdb device)
    // only needed if a special command was sent directly
    // DB0: mdb Device-Nr
    // DB1: last sent mdb command
    // DB2: nr of received (payload) data bytes (apart from ACK, can be 0....34)
    // DB3...DB38: rec.data (payload)


void gpi_storeEmpSettings(uint8_t leng, uint8_t *data);

void epi_restoreEmpSettings(uint8_t *leng, uint8_t *data);


/*
void gpi_storeEmpCoinSignal(uint8_t leng, uint8_t *data);

void epi_restoreEmpCoinSignal(uint8_t *leng, uint8_t *data);
    // return 5 byte:
    //      data[0]=got coin 0xFF=emp reported an error  0=got nothing
    //      data[1]=emp-signal of last inserted coin
    //      data[2,3]=emp-value of last inserted coin
    //      data[4] = emp-error or warning

void epi_clearEmpCoinSignal();
*/



void gpi_storeEmpCoinSignal(uint8_t leng, uint8_t *data);

uint8_t epi_isNewCoinLeft(void);
    // retval: 0...16 coins left in FIFO

void epi_restoreEmpCoinSignal(uint8_t *valid, uint8_t *signal, uint8_t *error, uint16_t *value);



void gpi_storeRbDeviceSettings(uint8_t leng, uint8_t *data);

void epi_restoreRbDeviceSettings(uint8_t *leng, uint8_t *data);


void gpi_storeMachineIDsettings(uint8_t leng, uint8_t *data);

void epi_restoreMachineIDsettings(uint8_t *leng, uint8_t *data);




void epi_clearCurrentPayment(void);

void gpi_storeCurrentPayment(uint32_t insertedAmount, uint16_t lastCoinType, uint16_t lastCoinValue);

uint32_t epi_CurrentPaymentGetAmount(void);

uint16_t epi_CurrentPaymentGetLastCoin(void);

bool epi_CurrentPaymentGetAllCoins(uint16_t *types, uint16_t *values);
    // alle bei diesem Verkauf eingeworfenen Münzen sind gespeichert falls die jmd. braucht


void gpi_storeWakeSources(uint8_t *receivedData);

uint64_t epi_getWakeSources(void);

uint8_t epi_getWakeReason(void);



void gpi_storeExtendedTime(uint8_t leng, uint8_t *data);

void epi_restoreExtendedTime(uint8_t *leng, uint8_t *data);


void epi_clearDeviceConditions(void);

void gpi_storeDeviceConditions(uint8_t leng, uint8_t *data);

void epi_restoreDeviceConditions(uint8_t *leng, uint8_t *data);


void epi_clearDynMachineConditions(void);   // new, 24.6.23

void gpi_storeDynMachineConditions(uint8_t leng, uint8_t *data);

void epi_restoreDynMachineConditions(uint8_t *leng, uint8_t *data);


void gpi_storeDCbackupAccNr(uint8_t leng, uint8_t *data);

void epi_restoreDCbackupAccNr(uint8_t *leng, uint16_t *accNrs);
    // return accNrs[0..7]


void epi_iniVRstorage(void);

void gpi_storeVaultRecord(uint8_t blkNr, uint8_t *data );

bool epi_checkIfVaultRecordAvailable(void);

uint8_t epi_getLoadedVaultBlocks(void);
    // return 0x0011 1111 if all 6 blocks arer loaded (one bit per block)

bool epi_restoreVaultRecord(uint16_t *length, uint8_t *buf );
    // true if completly received

void gpi_storeCBlevel(uint32_t amount, uint16_t nrOfCoins );

uint32_t epi_getCashBoxContent(void);

uint16_t epi_getNrOfCoinsInCashBox(void);

//void gpi_storeNewMifareCard(uint8_t typ, uint8_t *holder );

uint8_t epi_mifGetCardType(uint8_t *holder);
    //holder[8] = name of card holder
    // retval Type of MifareCard, 1=upper door, 2=lower door 3=test printer 4=test coins

void gpi_storeDcDataValid(bool isVal);

bool epi_areDcDataValid();



void epi_clearDynData(void);

void gpi_storeDynData(uint8_t *DCdynDat);
    // buffer size: 64 byte

bool epi_getDynPrnData(uint8_t *DCdynDat);
    // buffer size: 64 byte
    // return true if data are new and valid



void gpi_storeNextDCaccNr(uint16_t nxtDcAccNr);

uint16_t epi_getNextDCaccNr(void );


void gpi_storeMifCardType(uint16_t length, uint8_t *data);

void epi_restoreMifCardType(uint16_t *length, uint8_t *data);



// move here from dcBL and use shared mem as ptu-updater uses CAslave Lib 6.9.23TS
//#define RAW_BL_DATALEN      150
void gpi_storeRawReceivedData(uint8_t  RdDlen, uint8_t *receivedData);

uint8_t epi_getRawReceivedData(uint8_t *receivedData);
    // retval=length, will be zeroed after first reading

uint8_t epi_getRawRecLength(void);
    // retval=length

//QString epi_getRawReceivedString();
// not used

void epi_clrRawReceivedString();



// new from 28.9.23 and earliest from DC version 4.45
// store all versions of the DC-Jsons
//#define  numberOfJsons     36
//#define  versionStringLength    16
//char    store_jsonVersion[versionStringLength][numberOfJsons];

void gpi_storeJsonVersion(uint8_t  jsonNr, uint8_t *versionString);
    // jsonNr=1...36, 1=config file (cust.Nr) 2=devices  3=cash  4=res.
    //      5=printer template 1 ..... 36= template 32
    // length of buffer is always 16 byte

void epi_getJsonVersion(uint8_t  jsonNr, char *versionString);
    // jsonNr=1...36, 1=config file (cust.Nr) 2=devices  3=cash  4=res.
    //      5=printer template 1 ..... 36= template 32
    // length of buffer is always 16 byte




void epi_setNowCoinPay(bool on_off);

bool gpi_getNowCoinPay(void);


void epi_setNowIsBootload(bool on_off);

bool gpi_getNowIsBootload(void);

void gpi_storeChangerResult(uint8_t  result, uint32_t amount);

uint8_t epi_getChangerResult(uint32_t *returnedAmount);
    // get result of coin dispensing
    // receivedData[0]: 0: not yet started      1:amount returned
    //                  2:only partial return   3: no return possible
    // receivedData[2,3,4,5]: returned amount


void gpi_storeTubeLevel(uint8_t  *data);

void epi_restoreTubeLevel(uint8_t  *data);

void gpi_storeBnaParams(uint8_t  *data);

void epi_restoreBnaParams(uint8_t  *data);

void gpi_storeBnaCollection(uint8_t  *data);

void epi_restoreBnaCollection(uint8_t  *data);

void gpi_storeBnaContent(uint8_t  *data);

void epi_restoreBnaContent(uint8_t  *data);











#endif