DCLibraries/include/hwapi.h

1484 lines
60 KiB
C
Raw Normal View History

2023-11-08 13:02:26 +01:00
/*
matching interfaces.h:
// History
2024-07-04 14:01:43 +02:00
2023-11-08 13:02:26 +01:00
// 11.10.2021: V1.0 222 functions
// 23.12.2021: V1.1 added block-parameter to function "read mifare data"
// 30.12.2021: V1.2 added function: mif_clearDataBuffer(), mif_isBlockAvailable(uint8_t blkNr) and mif_getAvailableDataBlocks()
// 1.1.2022: V1.3 Mifare extended. ( background: read 16 x 48byte from card to DC, read 12 x 64byte from DC to CA)
// new: read full card with 768bytes from HWapi without block borders
// added: mif_getNrOfAvailableDataBytes mif_getCardData768byteDec(uint8_t *buf, uint16_t bufferSize)
// mif_getCardDataDec(uint16_t fromAddr, uint16_t toAddr, uint8_t *buf, uint16_t bufferSize)
// mif_getCardDataStr(bool useHexFormat, char seperator)
// 29.03.2023: V3.1 some extensions for PSA1256_ptu5,
// V3.2 Bootloader improvement
// 12.04.2023: V3.3 new features extended: loading and using Json-files, cash-collection, cash-data-logging
2024-07-04 14:01:43 +02:00
14.7.23TS: patch for correct printer state in line 3364 in sys_getDeviceConditions(struct T_moduleCondition *devCond) const
8.9.2023 two new functions (end of file) for mifare test. Interface version 4.4 DC4.40...4.43
14.09.2023: Verriegelung eingebaut, nur noch gültige Abr.Daten zurückgeben, Suchbegriff: <epi_restoreVaultRecord>
alle Mifare-Funktionen ueberprueft und ggf verbessert
18.09.2023: Signal "Kasse entnommen" und Signale "Tuer auf/zu" ueberprueft
20.9.2023: in datif die Abfrage der DynMachineData massiv beschleunigt
und hier in hwapi die entprellten Werte fuer Tueren und Kasse verwenden.
Problem war: Signal "Kasse entnommen" war zu langsam -> manchmal abr nicht gesendet
14.3.24 new function bool hwapi::cash_isCollectionStarted(void) const
padding three struct to 64 byte to avoid stack overflow when using
2023-11-08 13:02:26 +01:00
//#define HWINF_iid "Atb.Psa2020.software.HWapi/3.1"
//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.1"
#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.3"
V4.0 6.9.2023: activating DC-Bootloader in slve-lib (SM)
2024-07-04 14:01:43 +02:00
23.5.2024: prn_getHwState() fixed and moved down to runProc with a wrapper in hwapi, current version: 5.5
several new functions for "direct ticket print", without the dueway loading jsons to DC and cmd DC to print
The same rules as before apply to the json, but it can have any arbitrary length
2023-11-08 13:02:26 +01:00
*/
#ifndef hwapi_H
#define hwapi_H
2023-12-06 14:30:45 +01:00
#include <stdint.h>
2023-11-08 13:02:26 +01:00
#include <QtPlugin>
#include <QTimer>
#include <QObject>
#include <QDebug>
#include "tslib.h"
#include "datIf.h"
#include <QSharedMemory>
#include "sendWRcmd.h"
#include "controlBus.h"
#include "storeINdata.h"
#include "dcBL.h"
2023-12-16 09:36:53 +01:00
//#include <../plugins/interfaces.h>
2023-11-08 13:02:26 +01:00
#include "shared_mem_buffer.h"
#include "runProc.h"
2023-12-16 09:36:53 +01:00
#include "interfaces.h"
2023-11-08 13:02:26 +01:00
/*
* select Plugin Type here
*
* CashAgent (CA) Master Library:
* uses a serial port to communicate with device controller (DC)
* stores all received data into shared memory (SM) and writes all output data
* from SM to DC
* use interfaces.h to read/write data from/into SM
* CAmaster must be used only ONE time, as there is only one serial port hardware
* and only ONE DC. Using multiple will lead to a crash.
*
* CAslave Library:
* provides all the same functions as Master
* use interfaces.h to read/write data from/into SM
* May be used multiple times with one restriction:
* Output commands can be set double and ambigious but
* the output itself can only have ONE state!!
* Library users must know and coordinate this.
*
* The only difference between CAslave and CAmaster
* (apart from following define)
* is the *.pro file with different Target name and Path
*
* ATB, Thomas Sax, 21.06.2023
*/
//for CAslave:
2023-12-06 14:30:45 +01:00
//#undef THIS_IS_CA_MASTER
2023-11-08 13:02:26 +01:00
//for CAmaster:
2023-12-16 09:36:53 +01:00
//#define THIS_IS_CA_MASTER
2023-12-06 14:30:45 +01:00
2023-11-08 13:02:26 +01:00
class QSharedMemory;
class DownloadThread;
class ReportingThread;
2023-11-08 13:02:26 +01:00
class hwapi : public QObject,
public hwinf
{
Q_OBJECT
Q_PLUGIN_METADATA(IID "Atb.Psa2020.software.HWapi/1.0" ) //FILE "HWapi.json")
Q_INTERFACES(hwinf)
private:
void sub_storeSendingText(QByteArray *buf) const;
QTimer *hwapi_TimerPayment;
QSharedMemory *m_sharedMem;
ReportingThread *m_reportingThread;
DownloadThread *m_downloadThread;
2023-11-08 13:02:26 +01:00
//QTimer *hwapi_triggerBL;
public:
explicit hwapi(QObject *parent = nullptr);
2023-11-08 13:02:26 +01:00
#ifdef THIS_IS_CA_MASTER
T_datif *myDatif;
#endif
T_runProc *runProcess;
// ------------------------------------------------------------------------------
// commands, interface
// open, close, change serial interface
// actually not neccessary as it is opened automatically on program start
// start automatic READ requests
// ------------------------------------------------------------------------------
bool dc_openSerial(int BaudNr, QString BaudStr, QString ComName, uint8_t connect) const override;
// BaudNr: 0:1200 1:9600 2:19200 3:38400 4:57600 5:115200
// BaudStr: for exapmle "19200"
// ComName: for example "COM48"
// connect: 0, 1
void dc_closeSerial(void) const override;
bool dc_isPortOpen(void) const override ;
void dc_autoRequest(bool on) const override ;
// select if READ-Requests are sent manually one by one or automatically
// automatically request ALL digital and analog sensors, get time/date, get status information
void dc_requTestResponse() const override;
// tell DC2 to return his TestString in order
// to test the serial and the baudrate
// must always be triggered manually, is never sent automatically
bool dc_readAnswTestResponse() const override;
// retval: true: test was successful, got right response
uint8_t dc_isRequestDone(void) const override;
// retval: 0: request is still in progress
// 1: answer from DC2 was OK
// 2: wrong answer from DC2
uint16_t dc_getCompletePayLoad(uint16_t plBufSiz, uint8_t *payLoad) const override;
// get data back in *pl, max 64 byte, can be used for diagnosis
// retval = nr of bytes received. If host buffer too small then
// only plBufSíz bytes are copied to pl
// plBufSíz=size of host buffer
void dc_setWakeFrequency(uint8_t period) const override;
// RTC wakes DC2 (and PTU) by hardware signal every 32seconds
// change wake signal period to 1...64s
void dc_OrderToReset(void) const override;
// want DC2 to reset (in order to start Bootloader)
QString dc_getSerialState(void) const override;
void dc_clrSerialStateText(void) const override;
void bl_sendDataDirectly(uint8_t length, uint8_t *buf) const override;
// send without protocol frame, needed for the DC bootloader
uint8_t getRawRecLength(void) const override;
uint8_t getRawReceivedData(uint8_t *receivedData) const override;
QString dc_getSerialParams(void) const override;
QString dc_getHWversion(void) const override;
QString dc_getSWversion(void) const override;
QString dc_getState(void) const override;
// ----------------------------------------------------------------------------------------------------------
// Date and Time
// ----------------------------------------------------------------------------------------------------------
uint8_t rtc_getDateTime(struct Trtc_DateTime *rtc_DateTime) const override;
uint8_t rtc_setDateTime(void) const override;
// synch DC2 with PC or PTU system time and date
void rtc_getTime(uint8_t *hh, uint8_t *mm, uint8_t *ss) const override;
// get time directly
void rtc_getDate(uint8_t *yy, uint8_t *mm, uint8_t *dd) const override;
// get date directly
uint8_t rtc_getToday(uint8_t *dow, uint16_t *minOfToday, uint32_t *secOfToday) const override;
// dow=day of week, 1=monday...7
// minOfToday: 0=midnight...1439= 23:59
// secOfToday: 0=midnight...86399= 23:59:59
bool rtc_isLeapYear(uint8_t *lastLeapYear, uint8_t *NextLeapYear) const override;
// retval true: this year is leap year
bool rtc_isLeapYear() const override;
void rtc_getWeek(uint8_t *DayOfWeek, uint8_t *HoursOfWeek, uint16_t *MinutesOfWeek) const override;
// DayOfWeek: 1=monday...7
// HoursOfWeek: 0=Monday 0:00 o'clock...167=Sunday 23:00
// MinutesOfWeek: 0=Monday 0:00 o'clock...10079=Sunday 23:59
void rtc_getMonth(uint8_t *DayOfMonth, uint16_t *HoursOfMonth, uint16_t *MinutesOfMonth) const override;
// DayOfMonth: 1...31
// HoursOfMonth: 0 = 0:00o'clock of 1.day in month up to 743
// MinutesOfMonth:0 = 0:00o'clock of 1.day in month up to 44639
void rtc_getYear(uint16_t *DayOfYear, uint16_t *HoursOfYear, uint32_t *MinutesOfYear) const override;
// DayOfYear: 1...366 1= 1.Jan of this current year
// HoursOfYear: 0=1.Jan 0:00o'clock ...8783=31.12 23 o'clock
// MinutesOfYear: 0=1.Jan 0:00o'clock ...527039=31.12 23:59 o'clock
QString rtc_getTimStr(void) const override;
QString rtc_getDatStr(void) const override;
QString rtc_getTimDatStr(void) const override;
// UID
void dc_getUID8byte(uint8_t *buf8byteUid) const override;
QString dc_getUIDstr() const override;
uint64_t dc_getUIDnumber(void) const override;
// ----------------------------------------------------------------------------------------------------------
// analogs
// ----------------------------------------------------------------------------------------------------------
// Analog inputs:
uint32_t dc_getTemperature(void) const override; // in Sax-Format 0...400 (0=-50,0°C 100=0,0°C 141=20,5°C 400=150,0°C)
QString dc_getTemperaturStr(void) const override;
uint32_t dc_getVoltage(void) const override; // in mV, 0...65,535V
QString dc_getVoltagStr(void) const override;
bool dc_mainFuseIsOk(void) const override;
// ------------------------------------------------------------------------------
// digital outputs
// ------------------------------------------------------------------------------
// Locks move until stop cmd (0)
uint8_t lock_switchUpperLock(uint8_t dir) const override;
// dir 0=off 1=up 2=down
uint8_t lock_switchLowerLock(uint8_t dir) const override;
// dir 0=off 1=up 2=down
void lock_switchVaultDoor(void) const override;
void coin_switchRejectMotor(uint8_t dir) const override;
void coin_rejectCoins(void) const override;
// LEDs
void led_switchLedService(uint8_t on) const override;
void led_switchLedPaper(uint8_t on, uint8_t ton, uint8_t tof) const override;
void led_switchLedPinPad(uint8_t on, uint8_t ton, uint8_t tof) const override;
void led_switchLedStart(uint8_t on, uint8_t ton, uint8_t tof) const override;
void led_switchLedCoinbassin(uint8_t on, uint8_t ton, uint8_t tof) const override;
void fan_switchFan(bool on) const override;
void alarm_switchSiren(bool on) const override;
void bar_OpenBarrier(bool open) const override;
void ptu_switchWake(bool WAKEACTIVE) const override;
void aux_power(bool on) const override;
void aux_setUsage(uint8_t PinDirection) const override;
void aux_setOutputs(uint8_t PinIsHigh) const override;
void lock_switchContactPower(bool on) const override;
void prn_switchPower(bool on) const override;
void mif_readerOn(bool on) const override;
void mif_creatAtbCard(uint8_t cardType) const override;
void mod_switchPower(bool on) const override;
void mod_switchWake(bool WAKEACTIVE) const override;
void mdb_switchPower(bool on) const override;
void mdb_switchWake(bool WAKEACTIVE) const override;
void credit_switchPower(bool on) const override;
void credit_switchWake(bool WAKEACTIVE) const override;
void shut_move(bool open) const override;
void esc_moveFlaps(uint8_t flap ) const override;
// 0: close both 1: open take-flap 2: open return
// ------------------------------------------------------------------------------
// door, cashbox and lock switches
// ------------------------------------------------------------------------------
uint8_t door_getSwitches(void) const override;
// retval: bit0: upper door 1: low door 2:vault door
bool door_isUpperDoorOpen(void) const override;
bool door_isLowerDoorOpen(void) const override;
bool vault_isVaultDoorOpen(void) const override;
uint8_t vault_getSwitches(void) const override;
// retval bit0: cash box, bit 1: bill box
bool vault_isCoinVaultIn(void) const override;
bool vault_isBillVaultIn(void) const override;
uint8_t door_getLocks(void) const override;
// retval bit0: upper lever is up
// bit1: upper lever is down
// bit2: lower lever is up
// bit3: lower lever is down
bool door_upperDoorIsLocked(void) const override;
bool door_upperDoorIsUnlocked(void) const override;
bool door_lowerDoorIsLocked(void) const override;
bool door_lowerDoorIsUnlocked(void) const override;
bool bar_optoIn1isOn(void) const override;
bool bar_optoIn2isOn(void) const override;
uint8_t aux_getAuxInputs(void) const override;
bool ptu_WakeINisActive(void) const override;
bool mdb_WakeINisActive(void) const override;
bool prn_readyINisActive(void) const override;
bool coid_isAttached(void) const override;
bool coin_escrowIsOpen(void) const override;
bool mif_cardIsAttached(void) const override;
//bool hwapi::mod_WakeINisActive(void);
bool door_isContactPowerOn(void) const override;
bool mif_isMifarePowerOn(void) const override;
bool mdb_testIsmdbTxDon(void) const override;
bool aux_isAuxPowerOn(void) const override;
bool mod_isGsmPowerOn(void) const override;
bool cred_isCreditPowerOn(void) const override;
bool prn_isPrinterPowerOn(void) const override;
uint8_t prn_PrnFuseIsOk(void) const override;
//retval: 0: fuse blown 1: fuse OK 2:unknown as printer power is off
bool mdb_isMdbPowerOn(void) const override;
bool cash_getRejectMotorHomePos(void) const override;
uint8_t cash_getLowPaperSensor(void) const override;
// 0: Sensor sees paper 1: no paper 99: off
// ------------------------------------------------------------------------------
// request commands
// ------------------------------------------------------------------------------
// all read-requests can be sent manually by the following functions
// or automatically in background by: void hwapi::dc_autoRequest(bool on)
void request_DC2serialConfig() const override;
void request_DC2_HWversion() const override;
void request_DC2_SWversion() const override;
void request_DC2_condition() const override;
void request_DC2_UID() const override;
void request_DC2_TimeAndDate() const override;
void request_DC2_analogues() const override;
void request_DC2_digitalInputs() const override;
void request_DC2_digitalOutputs() const override;
// ------------------------------------------------------------------------------
// the folowing device state requests are deploed only if device is powered up:
void request_PrinterHwState() const override;
void request_PrinterCurrentFonts() const override;
void request_PrinterStateComplete() const override;
void request_MifareReaderState() const override;
void request_MifareCardType() const override;
void request_MifareAtbType() const override;
void request_MifareID() const override;
void request_MifareData(uint8_t dataBlockNumber) const override;
// dataBlockNumber must be 0....11, returns 64byte of data
void request_MDB_Status() const override;
void request_MDB_lastResponse() const override;
void request_EMP_allParameters() const override;
void request_EMP_lastCoin() const override;
// ------------------------------------------------------------------------------
// readback digital outputs of connected devices
// these functions are not needed for normal operation
// but can be used to test and verify conditions
// ------------------------------------------------------------------------------
bool test_getDO_mdbRXtst(void) const override;
uint8_t lock_getDO_motors(void) const override;
// bit0: upper lock forward bit 1 backward
// bit2: lower lock forward bit 3 backward
//virtual uint8_t test_serialState(void) const =0; ???
uint8_t test_serialState(void) const override;
// test on-board signals for the serials
// serial drv on/off, Serial mux1, Serial mux2
//virtual bool test_serialIsOn(void) const =0; ????
bool test_serialIsOn(void) const override;
bool test_serialMux1isSetToPrinter(void) const override;
bool test_serialMux1isSetToModem(void) const override;
bool test_serialMux2isSetToCredit(void) const override;
bool test_serialMux2isSetToMifare(void) const override;
bool led_coinIsOn(void) const override;
bool led_frontIsOn(void) const override;
bool led_ticketIsOn(void) const override;
bool led_pinIsOn(void) const override;
bool led_StartIsOn(void) const override;
bool led_insideIsOn(void) const override;
bool fan_isOn(void) const override;
bool siren_isOn(void) const override;
bool bar_relayIsOn(void) const override;
bool ptu_WakeOutIsOn(void) const override;
bool aux_powerIsOn(void) const override;
bool coin_shutterIsOpen(void) const override;
bool coin_shutterTestOutput(void) const override;
uint8_t coin_escrowFlapOpened(void) const override;
// retval: 1:return flap is open 2:take flap is open 0:closed
// ------------------------------------------------------------------------------
// devices are operated by DC
// processes with more then one devices
// timer controlled or long term processes
// ------------------------------------------------------------------------------
void sendDeviceSettings(uint8_t kindOfPrinter, uint8_t kindOfCoinChecker,
uint8_t kindOfMifareReader, uint8_t suppressSleep,
uint8_t kindOfModem, uint8_t kindOfCredit ) const override;
// enable hardware in device controller:
// kindOfPrinter: 0:off 1: GPT4672 (only this one implemented)
// kindOfCoinChecker: 0:off 1:EMP820 2:EMP900 3: C²_changer
// kindOfMifareReader: 0:off 1: SL025 (only this one implemented)
// suppressSleep: 0:sleep allowed 1: sleep surpressed for special reason
// kindOfModem: 0:off 1: ATB_Sunlink_LTE (not yet implemented)
// kindOfCredit: 0:off 1: cVendTopp 2:cVendPin (not yet implemented)
void request_ReadbackDeviceSettings() const override;
void readback_DeviceSettings(uint8_t *length, uint8_t *data) const override;
// refer to DC2 manual for exact content
// state 5.5.21: byte[0]=kindOfPrinter byte[1]=kindOfCoinChecker
// byte[2]=kindOfMifarereadr byte[3]=suppress sleep mode
// byte[4]=kindOfModem byte[5]=kind of cc terminal
void sendMachineID(uint16_t customerNr, uint16_t machineNr,
uint16_t borough, uint16_t zone,
uint16_t alias, char *location) const override;
void request_ReadbackMachineID() const override;
void readback_machineIDdata(uint8_t *length, uint8_t *data) const override;
// state 5.5.21: byte[0,1]=customer number byte[2,3]=machine number
// byte[4,5]=borough byte[6,7]=zone byte[8,9]=alias name
// byte[10...41]=location
// Locks stops automatically at end switch or by timeout
uint8_t lock_openUpperDoor(void) const override;
uint8_t lock_closeUpperDoor(void) const override;
uint8_t lock_openLowerDoor(void) const override;
uint8_t lock_closeLowerDoor(void) const override;
void shut_openOnce(void) const override;
// and close automatic after shutter time
void shut_openForCoin(bool start) const override;
// open flap if coin is attached
// once process is started it runs until stop command
void shut_sendOpeningTime(uint16_t timeIn_ms ) const override;
// after this time without retrigger the flap is closed
void esc_takeMoney(void) const override;
// and close automatically after escrow time (1s)
void esc_returnMoney(void) const override;
// and close automatically after escrow time (1s)
// ----------------------------------------------------------------------------------------------------------
// --------------------------------------------- MIFARE -----------------------------------------------------
// ----------------------------------------------------------------------------------------------------------
// obsolete
uint8_t mif_returnReaderStateAndCardType(uint8_t *buf, uint8_t maxBufferSize) const override;
// retval 0=OK 1=error host buffer too small
/* data description, new fast version:
byte 0= still the same: current read state:
0=power off 1=reader-fault 2=ready
3=just reading 4=read complete
5=read partial, removed too early
6=state unknown
byte 1: reader state 1=ok 0=nok
byte 2: card preent (0,1)
byte 3: card selected (0)
byte 4: card type: 0...5
byte 5: card allowed (0=no 1=MifareClassic 1k or 4k)
byte 6: CardSize: 1 or 4 (kB)
byte 7: length of UID 4 or 7 (byte)
*/
bool mif_readerIsOK(void) const override;
bool mif_cardAttached(void) const override;
uint8_t mif_readResult(void) const override;
// result: 0: unknown or still in progress
// 1: card read successful
// 2: reading error
QString mif_cardUID(void) const override;
uint8_t mif_getCardDataDec(uint8_t blkNr, uint8_t *buf, uint8_t maxBufferSize) const override;
QString mif_getCardDataStr(uint8_t blockNumber) const override;
// with blockNumber=0...11
// ----------------------------------------------------------------------------------------------------------
// --------------------------------------------- PRINTER ----------------------------------------------------
// ----------------------------------------------------------------------------------------------------------
// read printer condition and settings
uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const override;
2024-07-04 14:01:43 +02:00
// return value: =prn_hw_state[0]
// 0:unknown 1: printer OK 100: printer OK but paper near end
// 200: not connected 201: printer on error 202: no paper
2023-11-08 13:02:26 +01:00
bool prn_isUpAndReady(void) const override;
// true: printer is powered, serial is ok, no error, printer is connected and resonding
void prn_getCurrentFontSetting(struct Tprn_currentSettings *prn_fonts) const override;
// send Commands to printer:
void prn_sendText(QByteArray *buf) const override;
// up to 1280 bytes
void prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3) const override;
// send three byte through to printer, see printers manual
void prn_sendPrnEscCmd(uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4) const override;
// send four byte through to printer, see printers manual
void prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density, uint8_t alignment, uint8_t orientation) const override;
// send 5 byte: byte 0,1: speed 5...250 mm/s
// byte2: density 0....(25)....50
// byte3: alignment 'l', 'c', 'r' = left, center, right
// byte4: orientation 0, 90, 180 = 0°, 90°, 180° rotation (by now not supported!)
// not batched! don't use twice within 100ms
void prn_movePaper(uint8_t wayInMm, uint8_t direction) const override;
//direction: 1=forward 2=backward
2024-07-04 14:01:43 +02:00
2023-11-08 13:02:26 +01:00
void prn_setFonts(uint8_t font, uint8_t size, uint8_t width, uint8_t height) const override;
// font = kind of font 5...11 (0..22)
// size = 6...20, 9..9: too tiny 10: small ...12 = normal size ...20=huge
// width: 0...4 0=1x 1=2x 2=4x (huge!) 3=8x 4=16x (3,4 make no sense)
// heigth: 0...7 = 1x...8x only 0,1,2,(3) make sense
void prn_setLetters(uint8_t bold, uint8_t invers, uint8_t underlined) const override;
// bold: 0/1
// invers: 0/1
// underlined: 0/1
void prn_cut(uint8_t kindof) const override;
// kindof: 1=full cut 2=partial cut 3=eject (5xLF + full cut)
void prn_newLine(uint8_t nrOfLines) const override;
void prn_printCompleteFontTable(void) const override;
void prn_printBarcode(uint8_t kindOf, uint8_t withText, uint8_t offset, uint8_t rotation, uint8_t dataLeng, uint8_t *data) const override;
// kind of barcode: 0=Code39 1=Code128 2=EAN13 3= 2/5interleaved 4=UPC-A 5=EAN8
// withText: print readable text below
// offset: move by pixel from left border
// rotation
// dataLeng in byte
void prn_sendQRdata(QByteArray *buf) const override;
// maximal 150 alphanummeric bytes
void prn_printQRcode(void) const override;
// QRcode may have 1...150 alphanummeric data, must be transfered in advance
void prn_printLogo(uint8_t nrOfLogo, uint8_t offset ) const override;
// nrOfLogo: 1..4 in flash 5...8 in Ram
// offset: in mm form left border
// .........................................................
// Parking Ticket (print-out document) designer TD - obsolete
// .........................................................
// Predefine document Layout (e.g. parking ticket) in advance and stroe it for quick and easy use
// in opposite to the above "single" commands you need only one or a few commands at vending time.
// Stored text is just send to printer once the printing command is issued
// stored commands within the text are interpreted and executed right at the place (in ticket) they are
// example: start bold, <text in bold>, stop bold
// Predefinition of up to 16 ticket Layouts is possible, 0...1280 byte each
// Number 0..15, al keept non-volatile
// up to 8 dynamic values can be defined in the template ("print val3 here") and will be sent with printing command
// example: print current time at this point (the time of printing not the storage time!!)
//void pri_startTicketDesign(void) const override;
// start for every new printer document, reseting collecting buffer
// all further functions write/append text, numbers and command to the ticket-buffer, up to 1278 bytes allowed
// return val of the appending functions: true=ok false=too long, buffer full
//int pri_TD_getCurrentSize(void) const override;
// retval: 0...1278
//bool pri_TD_addText(QByteArray text) const override;
// example: pri_TD_addText("Hello") const override;
// example: pri_TD_addText(tempStr) const override;
// retval: true=ok false=too long, buffer full
//bool pri_TD_addValue(int val) const override;
// +/- 0...2^(31)
//bool pri_TD_addNewLine(void) const override;
//bool pri_TD_addSign(char sign) const override;
// example: '.' ' ' 0x20 'W' '$'
//bool pri_TD_addCommand(char group, char attribute, char p1, char p2, char p3, char p4, char p5) const override;
// always add 8 byte to the ticket layout: ESC & group & attribute & parameter1...5
/* complete list of possible commands:
group 50 : paper
attribute 10 : move forward
p1: wayInMm p2: direction
attribute 11 : cut
p1: kind of, 1=full 2=partial, 3=eject
attribute 12 : new line(s)
p1: nr of lines 1...100
group 51 : fonts
attribute 10 : kind of font see description above
p1: 0...8
attribute 11 : font size
p1: 6...20
attribute 12 : font width
p1: 0...4
attribute 13 : font heigth
p1: 0...7
attribute 14 : switch bold print on/off
p1: 0=off 1=on
attribute 15 : switch invers print on/off
p1: 0=off 1=on
attribute 16 : switch underlined print on/off
p1: 0=off 1=on
group 52 : print graphics
attribute 10 : print barcode with dynamic data 6 and 7
p1...p5 = kindOf, withText, offset, rotation, dataLeng, see description above
attribute 11 : print QRcode with preset data
attribute 12 : print Logo
p1=nrOfLogo, p2=offset
group 53 : print dynamics
attribute 10 :
p1: 1...8 = print dynData 0..7 at this place
*/
//char prn_clearDocument(uint8_t documentNumber) const override;
// clear memory buffer for ONE document
// function takes a second! don't send right before "store doc"
//bool prn_store_Document(uint8_t documentNumber ) const override;
// send the predefined Layout (generated with above TD functions) to DeviceController to save
// documentNumber=0...15
// maximal 1280 bytes each
// allowed: 0x20...0xFF, 0x0A, 0x0C, 0x1B (LF, CR, Esc)
// 0x1B=start of embedded command (next 7bytes = command)
// with a print command a set of 8 dynamic strings can be sent
// the place in the ticket layout is predefined (already in DC memory)
// the dynamics are first calculated at printing time
//bool prn_printDocument(uint8_t documentNumber, struct T_dynDat *dynTicketData) const override;
// ----------------------------------------------------------------------------------------------------------
// --------------------------------------------- MDB Bus ----------------------------------------------------
// ----------------------------------------------------------------------------------------------------------
void mdb_sendBusReset(void) const override;
void mdb_sendCommand(uint8_t toMdbDevice, uint8_t mdbCommand) const override;
// send one bus command directly over mdb bus, refer to mdb manual for commands
// this command is not needed in normal operation, just for new or special things
void mdb_sendMessage(uint8_t toMdbDevice, uint8_t mdbCommand, uint8_t nrOfData, uint8_t *dataBuffer) const override;
// nrOfData = sizeOf(dataBuffer) maximal 34 byte according mdb specs
// same as mdb_sendCommand, just with data
bool mdb_busIsReadyToWork() const override;
bool mdb_deviceVoltageOK() const override;
bool mdb_busVoltageOk() const override;
uint8_t mdb_getLastDeviceResponse(uint8_t *fromDevice, uint8_t *lastRequest,
uint8_t *responseLength, uint8_t *responseBuffer) const override;
// fromDevice: device nr from which data was requested 0,1,2,3
// lastRequest: sent mdb command
// responseLength: nr of payload data (after mdb-ack) 0...34
// responseBuffer holds payload data (answer from mdb device)
// return val: mdb result of this request: 1=got ACK 2=got 3xNAK 3=no or bad response 4:got Data (after ACK)
// ----------------------------------------------------------------------------------------------------------
// ---------------------------------- Electronic Coin Validator EMP -----------------------------------------
// ----------------------------------------------------------------------------------------------------------
void emp_sendSettings(uint16_t coinAcceptance, uint8_t tokenChannel, uint16_t *coinDenomination ) const override;
// coinAcceptance: bit0=coin1 (lowest donomination) bit15=coin16 bitH=accept bit L = deny coin (no validation)
// tokenChannel 0...31: if this signal comes from emp then a token was inserted
// coinDenomination = array of 16 coin values (e.g. 5, 10, 20...)
void emp_pollingOnOff(uint8_t on) const override;
void emp_startCoinAcceptance(void) const override;
void emp_stopCoinAcceptance(void) const override;
void emp_getAllParameters(struct T_emp *emp) const override;
// see struct in hwapi.h
// usage example:
// hwapi *HWaccess const override;
// HWaccess = new hwapi() const override;
// struct T_emp myEmp const override;
// HWaccess->emp_getAllParameters(&myEmp) const override;
// readval=myEmp.pollingRunning const override;
uint8_t emp_chkIfCoinInserted(void) const override;
// retval: 0...16 coins left in FIFO
void emp_getNewCoinRecord(uint8_t *valid, uint8_t *signal, uint8_t *error, uint16_t *value) const override;
// with every call ONE coin is taken out of FIFO and pointer decremented
// valid: should be 1
// signal: comes right from coin checker, 0...15 (0=first programmed coin type) 0xFF=no signal
// error: was reported from EMP as dynamic signal right after coin insertion (instead of
// coin signal), example: 3=unknown coin 4=coin is blocked by host. 0xFF=no error
// value: of the coin. Depends on parameter "coinDenomination" in function "emp_sendSettings"
// if coinDenomination[coin 0..15] = 0 then the value programmed in coin checker is taken
// if coinDenomination > 0 then this value is taken.
// Useful in case of two currencies (adapt to local currency) or for token.
// function gives more details as "emp getLastCoin()" but "emp getLastCoin()" is easier to use
// alternativ to emp_getNewCoinRecord( ):
uint8_t emp_giveLastCoin(uint16_t *value, uint8_t *signal) const override;
// retval: 0: NO coin stored 1: valid coin 2: got wrong coin or coin denied
// value: if retval1: value of the coin if reval=2: error number
// 0xFF means NO error or NO signal (as 0 is a valid error/signal)
// signal: channel nr reported from checker 0...15
uint8_t emp_returnLastCoin(uint16_t *value, uint8_t *signal) const override;
// use for changer
//#ifdef THIS_IS_CA_MASTER
QString dc_getTxt4RsDiagWin(void) const override;
void dc_clrTxt4RsDiagWin(void) const override;
QString dc_get2ndTxt4RsDiagWin(void) const override;
void dc_clr2ndTxt4RsDiagWin(void) const override;
QString dc_getTxt4HsStateLine(void) const override;
void dc_clrTxt4HsStateLine(void) const override;
QString dc_getTxt4masterStateLine(void) const override;
void dc_clrTxt4masterStateLine(void) const override;
QString dc_getTxt4resultStateLine(void) const override;
void dc_clrTxt4resultStateLine(void) const override;
QString dc_getdataStateLine(void) const override;
void dc_clrTxt4dataStateLine(void) const override;
QString dc_getdatifLine(void) const override;
void dc_clrTxt4datifLine(void) const override;
//#endif
// ----------------------------------------------------------------------------------------------------------
// -------- DC Bootloader 1.Version
// ----------------------------------------------------------------------------------------------------------
// using DC2 Bootloader
void bl_iniChain(void) const override;
bool bl_importBinFile(QByteArray readBinFile, uint32_t fileSize, char withDispl) const override;
uint8_t bl_activatBootloader(uint8_t *sendData) const override;
uint8_t bl_startChain(void) const override;
uint8_t bl_readBLversion(uint8_t *sendData) const override;
// minimum size of sendData-buffer: 5byte retval: length
uint8_t bl_readFWversion(uint8_t *sendData) const override;
// minimum size of sendData-buffer: 5byte retval: length
uint8_t bl_prepareDC_BLcmd(uint8_t Cmd, uint8_t SendDataLength, uint8_t *sendData, uint8_t *outBuf) const override;
// make BL protocol, retval = outbuf length (5...133)
// bring data in correct form: start always with 0x02 finish with 0x03 and append checksum
// 0x02 Cmd < ...sendData ..> CRC CRC 0x03
// Data length = 0...64
// special conversion: if data contain 2 or 3 (STX, ETX) then write two bytes: 0x1B (=ESC) and data|0x80
// so maxlength = 5 + 2 x 64 (if all data are 2 or 3) without 2,3: maxlength = 5 + 64
uint8_t bl_exitBL(uint8_t *sendData) const override;
// minimum size of sendData-buffer: 5byte retval: length
void led_switchLedIllumination(uint8_t on) const override;
// ------------------------------------------------------------------------------------
// 27.3.2023: Use Device-Controller's Bootloader to send hex-file
// ------------------------------------------------------------------------------------
void bl_rebootDC(void) const override;
void bl_startBL(void) const override;
void bl_checkBL(void) const override;
bool bl_isUp(void) const override;
// return true is bl is up and running
// also initializes "sendFile"
void bl_sendAddress(uint16_t blockNumber) const override;
// send start address, nr of 64byte-block, start with 0
// will be sent only for folling block-numbers:
// 0, 1024, 2048, 3072 and 4096, so basically every 64kByte
uint8_t bl_wasSendingAddOK(void) const override;
// return val: 0: no response by now 1:error 10: OK
void bl_openBinary(void) const override;
void bl_sendDataBlock(uint8_t length, uint8_t *buffer) const override;
// send 64 byte from bin file
void bl_sendLastBlock(void) const override;
uint8_t bl_wasSendingDataOK(void) const override;
// return val: 0: no response by now 1:error 10: OK
void bl_stopBL(void) const override;
// ------------------------------------------------------------------------------------
// 6.4.2023: new functions for coin collection and printing
// some new system functions
// ------------------------------------------------------------------------------------
bool rtc_setTimeDateDirect(struct Trtc_DateTime *DateTime) const override;
// return true if successful. could fail if more the 8 commands are waiting
bool rtc_getExtendedTime(uint8_t *leng, uint8_t *data) const override;
bool rtc_getExtendedTime(struct T_extTime *exTime) const override;
bool sys_runCompleteTest(void) const override;
// warning: lasts 20s in one pace
bool sys_ready4sending(void) const override;
// return true if a Json-file can be sent
bool sys_sendJsonFileToDc(uint8_t kindOfFile, uint8_t nrOfTemplate, uint8_t *content ) const override;
// kindOfFile: 1=config, 2=device, 3=cash, 4=serial, 5=time, 6=printer
// nrOfTemplate=1...32 if kindOfFile==6
// content = content of the Json file, max 800byte ascii signs
// file is 0-terminated!
// return false if sending is not possible, wait a second
bool prn_sendDynamicPrnValues(uint8_t *dynPrnVal ) const override;
// dynPrnVal = array of 8 Variables with 8 byte each, come as ascii string
// like: char prn_dynPrnVal[8][8];
// return true if sending, false if cmd-stack is full
bool prn_printTemplate(uint8_t nrOftemplate) const override;
// print one of the templates loaded by Json prior
// nr = 1..32
// return true if sending, false if cmd-stack is full
void log_getHoldAccountNumbers(uint8_t *nrOfVals, uint16_t *accNr ) const override;
// returns all acc nrs of the backuped vault records
// use: uint16_t backupedAccNumbers[8]
// will be requested automatically
bool log_selectVaultRecord(uint16_t accountNr ) const override;
// return true if sending, false if cmd-stack is full
// and trigger transfer
bool log_chkIfVaultRecordAvailable(void) const override;
// return true if completly received
bool log_getVaultRecord(struct T_vaultRecord *retVR) const override;
// which was selected by: log_selectVaultRecord()
// to be forwarded to Ismas
bool prn_printAccountReceipt(void) const override;
// return true if sending to DC OK, false if cmd-stack is full
bool prn_printTestTicket(void) const override;
// return true if sending to DC OK, false if cmd-stack is full
bool cash_startPayment(uint32_t amount) const override;
// 17.4.23TS: extended to 32bit
uint8_t cash_paymentProcessing(void) const override;
// run this function periodically while coin payment process to generate necessary signals
// return value:
// 0: stopped 1: starting up 2: coin collection
// 3: finished by User (Push button) 4: finished, Max-Value collected
// 5: finished by escrow
// 10,11: error cannot start
// 12: timeout while payment, coins returned
// 13: stopped by unexpected error
uint32_t getInsertedAmount(void) const override;
uint16_t getLastInsertedCoin(void) const override;
bool getAllInsertedCoins(uint16_t *types, uint16_t *values) const override;
// alle bei diesem Verkauf eingeworfenen Münzen sind gespeichert, max 64
bool cash_cancelPayment(void) const override;
// and return coins
bool cash_stopPayment(void) const override;
// and keep coins in escrow
// after ticket/goods issue:
bool vend_success(void) const override;
// conclude payment process, encash all inserted coins to vault. Printing was successful
// if possible return change
bool vend_failed(void) const override;
// conclude payment process and return all inserted coins
uint8_t mif_getCardType(QString *cardholder) const override;
// return 1,2,3,4 = upper, lower access card, printer test, coin test
// cardholder: 7byte Name-String
uint64_t sys_getWakeSource(void) const override;
// retval: 6 bytes, bit coded, 1=event keeps DC awake
uint8_t sys_getWakeReason(void) const override;
// Master was woken by following reason:
// 1: MDB Event
// 2: Coin Event
// ( 3: Master Event) - will not set the wake line
// ( 4: 32s pulse) - will not set the wake line
// 5: Door Event
// ( 6: Diag Event) - will not set the wake line
// 7: 30min-Pulse for HB
void sys_getDeviceConditions(uint8_t *leng, uint8_t *data) const override;
void sys_getDeviceConditions(struct T_moduleCondition *devCond) const override;
void sys_getDynMachineConditions(uint8_t *leng, uint8_t *data) const override;
void sys_getDynMachineConditions(struct T_dynamicCondition *dynMachCond) const override;
uint32_t cash_getAmountInVault(void) const override;
uint16_t cash_getNrCoinsInVault(void) const override;
uint8_t prn_getPrintResult() const override;
// return: 0: unknown
// 1: OK - last template was printed succesful
// 2: error - last template was not printed
uint8_t prn_getCurrentPrinterState() const override;
// 0: printer OK
// bit0: near paper end bit1: no paper
// bit2: temperature error bit3: error head open
// bit4: paper jam in cutter
// bit6: no response bit7: serial rec. error
// bit5: printer not ready
void sys_sendDeviceParameter(struct T_devices *deviceSettings) const override;
void sys_restoreDeviceParameter(struct T_devices *deviceSettings) const override;
// attention: only applies if function "sys_sendDeviceParameter()" was used to send this settings before
// cannot be used to see settings programmed by JsonFile
bool sys_areDCdataValid(void) const override;
bool sys_sendingTest(void) const override;
void prn_requestCurrentDynData(void) const override;
bool prn_getCurrentDynamicPrnValuesFromDC(uint8_t *dynPrnVal ) const override;
// which was sent with: bool prn_sendDynamicPrnValues(uint8_t *dynPrnVal ) const override;
bool prn_dynDataAreEqual(uint8_t *buf) const override;
bool prn_printKombiticket(uint8_t nrOfKombi) const override;
// print four of the templates loaded by Json prior
// nr = 1..8
void lock_triggerUpperSolenoid(void) const override;
void lock_triggerLowerSolenoid(void) const override;
bool doors_supervise(void) const override;
bool dc_isAutoRequestOn(void) const override;
uint16_t log_getLatestAccountNumber(void) const override;
// new function 27.6.2023
// latest = highest
uint8_t log_getAvailableVaultBlocks(void) const override;
// return 0x0011 1111 if all 6 blocks arer loaded (one bit per block)
uint8_t log_getAnswerToLastSlaveRequest(void) const override;
// use only for ONE request/command
// return: 0xFF: result unknown by now as sending is ongoing
// 0=OK
// 1= wrong length 2=wrong start sign 5= wrong crc
// 6= slave: master cmd was wrong 7: slave: could not write/read data
// 8=timeout, got no response from slave
// use for important and extended commands (print more templates, print ticket...)
void log_startSupervision(void) const override;
uint8_t log_getAnswerToLastCmdBatch(void) const override;
// 0xFF: no command sent by now
// 0: started, in progress
// 1: done and OK
// 2: done and error
bool log_getVaultData(uint8_t *data) const override;
// get vault record in linear 8bit buffer with 384 byte
// new from 1.8.23
bool prn_printOneAccountReceipt(uint16_t accountNr) const override;
// print one out of eight stored last accounting receipts
// function log_getHoldAccountNumbers() gives a list of acc-Nr. of the stored receipts
bool prn_printAllAvailAccountReceipts(void) const override;
// same as: prn_printAccountReceipt() from line 1153
// return true if sending to DC OK, false if cmd-stack is full
bool log_verifyVaultRecordByCrc(void) const override;
// return true if CRC16 is correct, data are 100% OK. Security level 1:65536
// verification is strongly recommended before further processing
// in case of "false"-result please reload from DC
uint16_t log_DC_getNextAccountNumber(void) const override;
// the current cash box content will be backuped with this number on next cashbox-change
void log_DC_setNextAccountNumber(uint16_t newAccountingNumber) const override;
// the current cash box content will be backuped with this number on next cashbox-change
// use only in case of hardware replacements or errors which derailed the number
void log_DC_deleteAllVaultrecordsInDc(void) const override;
// use only in case of hardware replacements or errors which derailed the number
void log_DC_deleteAllTotalCounters(void) const override;
// use only in case of hardware replacements or errors which derailed the number
void dc_setNewCustomerNumber(uint16_t newCustNr) const override;
void dc_setNewMachineNumber(uint16_t newMachNr) const override;
void dc_setNewBorough(uint16_t newBorough) const override;
void dc_setNewZone(uint16_t newZone) const override;
// new functions from 8.9.23
QString mif_getReaderType(void) const override;
void mif_getCardSize(uint8_t *cardSize, uint8_t *idLeng) const override;
// cardSize=1k or 4kByte
// idLeng =4Byte or 7 byte
char mif_getAtbCardData(uint8_t *buf, uint8_t maxBuffSiz) const override;
// return complete buffer binary, just for test purpose
bool mif_isValidAtbCard(void) const override;
uint32_t mif_getAtbCardCuNu(void) const override;
uint8_t mif_getAtbCardTyp(void) const override;
// return 1=upper door card 1=lower door 3=printer-test 4=coin-test
// 0: not a valid atb2020 card
QString mif_getAtbCardPerso(void) const override;
// e.g. "PNsax001" used for personal number, name shortcode, card number
// free to use, can be set in AtbMcw23.exe tool
void mif_getAtbCardExpire(uint8_t *year, uint8_t *month, uint8_t *day, uint8_t *hour, uint8_t *minute) const override;
// ------------------------------------------------------------------------------------
// Device-Controller-Bootloader convenient version 21.09.2023
// ------------------------------------------------------------------------------------
// use this to jump to BL:
//void hwapi::bl_rebootDC(void) const
// use this to start BL:
// void hwapi::bl_startBL(void) const
// call this in order to get response from BL:
//void hwapi::bl_checkBL(void) const
// evaluate BL response:
//bool hwapi::bl_isUp(void) const
// 29.9.23: new: "completeStart" function, replaces bl_rebootDC(), bl_startBL() and bl_checkBL()
// result can be verified with bl_isUp() as before
bool bl_completeStart(void) const override;
// must be used in DC's normal operation
// select binfile-name in GUI
// send binfile-name to BL-processor:
bool bl_storeFirmware(QString fileName) const override;
// load binary file 3x and compare
// return true if loaded correctly
// return false: error, could not load correctly
// request the number of blocks for this file
uint16_t bl_getNrOfFirmwareBlocks(void) const override;
// size of the loaded bin file in 64byte blocks
// call after bl_storeFirmware()
// call this function with "blockNumber"=0,1,2,3.....bl_getNrOfFirmwareBlocks
//the last block "bl_getNrOfFirmwareBlocks()" is sent as conclusion command (important!)
bool bl_blockAutoLoad(uint16_t blockNumber) const override;
// call in loop from block number 0 up to <= "dcBL_getNrOfBlocks()"
// but after every call WAIT (!) for response "bl_blockAutoResponse()" !!!!
// data will be sent to DC, if neccesary addr will be sent additionally
// if neccesary sending will automatically repeat up to 3times
// retval: false if blockNumber>4095, true else
// check out this response after every block-sending, wait until >0!!!
int8_t bl_blockAutoResponse(void) const override;
// after every "bl_blockAutoLoad()" call this until response
// retval 0: wait 1: OK, blk was sent 2: OK, transfer complete
// 3: error despite repeating, cancel. probably bin file corrupted
// Max duration: 3x no response from BL = 900ms
// -------------- end of bootloader ---------------------------------------------------
// new from 28.9.23 and earliest from DC version 4.45
// get all versions of the DC-Jsons
void sys_requestJsonVersions(uint8_t jsonNr) const override;
// send one request for every single version
// jsonNr=1...36, 1=config file (cust.Nr) 2=devices 3=cash 4=res.
// 5=printer template 1 ..... 36= template 32
void sys_getJsonVersions(uint8_t jsonNr, char *versionString) const override;
// jsonNr=1...36, 1=config file (cust.Nr) 2=devices 3=cash 4=res.
// 5=printer template 1 ..... 36= template 32
// length of buffer is always 16 byte
// ------------------------------------------------------------------------------------
// Coin Changer
// ------------------------------------------------------------------------------------
void changer_returnCoins(uint32_t amountInCent) const override;
void changer_requestChangeResult(void) const override;
uint8_t changer_getChangeResult(uint32_t *returnedAmount) const override;
void changer_getAllParameters(struct T_changer *mw) const override;
void changer_requestTubelevel(void) const override;
void changer_getTubelevel(struct T_chg_Tub *tubLevel) const override;
// ------------------------------------------------------------------------------------
// bank note acceptor
// ------------------------------------------------------------------------------------
void bna_sendSettings(uint16_t notesToAccept, uint16_t parameters,
uint16_t *billDenomination,
uint32_t acceptanceLimit) const override;
// notesToAccept: bit0=bill1 (lowest donomination) bitH=accept bit L = deny
// parameters: e.g. use escrow function for some notes
// billDenomination = array of 16 bill values (e.g. 5, 10, 20...)
// these can be set alternatively by Json-File DC2C_cash.json
// acceptanceLimit: device will stop acceptance once this amount is reached and
// optionally keep last bill in escrow until vend_success()
// is called (put bill to stacker) or vend_failed() is called (return bill)
void bna_setCurrentAcceptance(uint16_t notesToAccept) const override;
// can be used to block notes dynamically, example: from now only 5€ bills are allowed (if only 3€ are to be paid)
void bna_requestParameters(void) const override;
// send command to DC in order to get static invariable device parameters like currency
// device must be powered and polled to get these
bool bna_getAllParameters(struct T_bna *bna) const override;
// get all constant data from reader (e.g. currency)
// and actual Host-Settings (sent with bna_sendSettings() or json)
// retval = true if data are valid
void bna_requestCurrentNotes(void) const override;
// send command to DC in order to get transaction data
uint8_t bna_getCurrentNotes(uint16_t latestBill, uint16_t *currentNotes) const override;
// returns number of collected bank notes since start-command (current transaction)
2023-12-16 09:36:53 +01:00
// return value: numbers of bills or 99 in case of error
// latestBill: not used
// in case of error: currentNotes[0,1,2,3] = 1..4 error number(s)
// in normal case:
// currentNotes[0]: last bill in cent (e.g. 1000 = 10€)
// currentNotes[1]: bin 1 = bill is still in escrow else bill is stacked
// note: by now (dec2023) escrow is not used, bills always go to stacker (box)
// currentNotes[2]: total sum of bills in cent, low word (16bit)
// currentNotes[3]: total sum of bills in cent, high word (16bit)
2023-11-08 13:02:26 +01:00
void bna_requestStackerLevel(void) const override;
uint16_t bna_getStackerLevel(uint32_t *amountInStacker, uint16_t *countOfBills) const override;
// return val: nr of bills in stacker
// countOfBills: array of up to 16 sums, countOfBills[0]=nr of 5€-bills in stacker
// countOfBills[1] for 10€ and so on
2024-03-14 15:12:33 +01:00
bool cash_isCollectionStarted(void) const override;
// download device controller
bool dcDownloadRequest(QString const &fileToDownload) const override;
bool dcDownloadRequested() const override;
bool dcDownloadResetRequest() const override;
bool dcDownloadRequestAck() const override;
bool dcDownloadRunning() const override;
bool dcDownloadFinished() override;
bool dcDownloadReportStart() const override;
bool dcDownloadReportRunning() const override;
bool dcDownloadReportFinished() override;
bool dcDownloadThreadStart() override;
bool dcDownloadThreadRunning() const override;
void dcDownloadThreadFinalize(DownloadThread *) override;
bool dcDownloadThreadFinished() const override;
bool dcDownloadReportThreadStart() override;
bool dcDownloadReportThreadRunning() const override;
void dcDownloadReportThreadFinalize() override;
void dcDownloadReportThreadQuit() override;
bool dcDownloadReportThreadFinished() const override;
QString dcDownloadFileName() const override;
bool dcDownloadSetRequested(bool) override;
bool dcDownloadSetRunning(bool) override;
bool dcDownloadSetFinished(bool) override;
void dcDownloadSetTotalBlockNumber(uint16_t totalBlockNumber) override;
void dcDownloadSetCurrentBlockNumber(uint16_t currentBlockNumber) override;
bool dcDownloadGetRequested() const override;
bool dcDownloadGetRunning() const override;
bool dcDownloadGetFinished() const override;
uint16_t dcDownloadGetTotalBlockNumber() const override;
uint16_t dcDownloadGetCurrentBlockNumber() const override;
virtual QObject const *getAPI() override;
2023-12-06 14:30:45 +01:00
2024-07-04 14:01:43 +02:00
void mod_switchResetline(void) override;
// 22.5.2024 direct ticket printing
void prn_translateLocalPrinterJson(QByteArray jsonFile2print) const override;
// load, parse, translate and save the file
void prnStoreDynamics(char *bufferDynPrintVars[], uint8_t nrOfDyns) const override;
// store nrOfDyns (up to 16) dynamics before printing
// max length = 16 byte per dynamic
// 16 strings with up to 16bytes each
void prn_printTranslatedTicket(void) const override;
uint8_t prn_waitForDirectTicket(void) const override;
2023-11-08 13:02:26 +01:00
signals:
2024-03-14 15:12:33 +01:00
void hwapi_reportDCDownloadStatus(QString const&) const override;
void hwapi_reportDCDownloadSuccess(QString const&) const override;
void hwapi_reportDCDownloadFailure(QString const&) const override;
2023-12-06 14:30:45 +01:00
void hwapi_templatePrintFinished_OK(void) const override;
void hwapi_templatePrintFinished_Err(void) const override;
2023-11-08 13:02:26 +01:00
2023-12-06 14:30:45 +01:00
void hwapi_coinCollectionJustStarted(void) const override;
void hwapi_coinCollectionAborted(void) const override;
2023-11-08 13:02:26 +01:00
2023-12-06 14:30:45 +01:00
void hwapi_gotNewCoin(void) const override;
void hwapi_payStopByMax(void) const override;
void hwapi_payStopByPushbutton(void) const override;
2023-11-08 13:02:26 +01:00
2023-12-06 14:30:45 +01:00
void hwapi_payStopByEscrow(void) const override;
void hwapi_payStopByError(void) const override;
void hwapi_payStopByTimeout(void) const override;
void hwapi_payCancelled(void) const override;
void hwapi_coinProcessJustStopped(void) const override;
2023-11-08 13:02:26 +01:00
// new from 2023.06.12
2023-12-06 14:30:45 +01:00
void hwapi_doorServiceDoorOpened(void) const override;
void hwapi_doorVaultDoorOpened(void) const override;
void hwapi_doorCoinBoxRemoved(void) const override;
void hwapi_doorCoinBoxInserted(void) const override;
void hwapi_doorCBinAndAllDoorsClosed(void) const override;
void hwapi_doorAllDoorsClosed(void) const override;
2024-02-19 15:59:41 +01:00
void hwapi_coinAttached() const override;
2023-11-08 13:02:26 +01:00
2024-07-04 14:01:43 +02:00
2023-11-08 13:02:26 +01:00
private slots:
//void hwapi_slotPrintFinished_OK(void);
//void hwapi_slotPrintFinished_Err(void);
//void hwapi_slotGotCoin(void);
void hwapi_slotPayProc(void);
//bool bl_performComplStart(void);
void sub_slotCoin01(void);
void sub_slotCoin02(void);
void sub_slotCoin03(void);
void sub_slotCoin04(void);
void sub_slotCoin05(void);
void sub_slotCoin06(void);
void sub_slotCoin07(void);
void sub_slotCoin08(void);
void sub_slotCoin09(void);
void sub_slotCoin10(void);
void sub_slotCoin11(void);
void sub_slotCoin12(void);
void sub_slotCoin13(void);
void sub_slotCoin14(void);
void sub_slotCoin15(void);
void sub_slotCoin16(void);
2024-02-19 15:59:41 +01:00
void coinAttached();
2023-11-08 13:02:26 +01:00
};
#endif