ATBUpdateTool/include/sendWRcmd.h
Gerhard Hoffmann 8b301a91dc Squashed 'DCPlugin/' changes from 3e3e1ef..652ad9b
652ad9b Included changes of TS for version 3.5.
c85b090 Added ulong2uchar (version 3.5).
87a6ed0 Include changes of Thomas for version 3.5.
99c88c7 Included changes of Thomas for version 3.5. prn_getPrintResult(),
712ea0f Included changes of Thomas for version 3.5 of library: datif_templatePrintFinished_OK(), datif_templatePrintFinished_Err(), datif_gotNewCoin().
86311de Add use of shared memory. Add changes for version 3.4. of library.
cb44127 Added check4freeFDshortCmd.
a95e174 Included some changes of Thomas.
c724b5b Shift several device controller related variables to shared memory.
ef79321 Massive change: using shared memory containing most device controller realted variables.
a7aa75a Massive change: using shared memory containing devcie controller variables.
dc00c69 Added check4freeFDlongCmd.
eeb3519 Adding shared memory containing all variables necessary to check device controller related variables.
30338e2 Changed struct T_moduleCondition. Changed struct T_dynamicCondition. Added struct T_extTime. Added log_chkIfVaultRecordAvailable(). Added sys_getDeviceConditions(). set version to 3.4.
58fdea4 Added m_sharedMem. Added cash_getAmountInVault. Added cash_getNrCoinsInVault. Added sys_getDynMachineConditions() with new interface. Added sys_getDeviceConditions() with new interface. Added log_chkIfVaultRecordAvailable().
df760f1 Added shared_mem_buffer.h/.cpp.

git-subtree-dir: DCPlugin
git-subtree-split: 652ad9b43d24bddbc3c2636c4ff4b5d74e081e46
2023-04-18 13:43:37 +02:00

243 lines
8.7 KiB
C

#ifndef SENDWRCMDS_DEFS_H
#define SENDWRCMDS_DEFS_H
#include <stdint.h>
#include "tslib.h"
#include <QString>
// asynch. Commands
// store OUTPUT commands until time to send
// problem: OUT commands are set if a button is pressed or a transaction event happens
// so it's never synchron with sending grid
// but sending must apply the 100ms time grid as we have to wait for the response before sending the next command!!!
// Level 0 (DC direct)
#define SENDDIRCMD_TestSerial 1
#define SENDDIRCMD_MakeReset 2
#define SENDDIRCMD_setTime 3
#define SENDDIRCMD_setWakeFrequ 4
// Level 1 (DC DO's switching connected parts)
#define SENDDIRCMD_MOVEUP_LOCK 5
#define SENDDIRCMD_MOVEDN_LOCK 6
#define SENDDIRCMD_OPENUP_DOOR 7
#define SENDDIRCMD_OPENDN_DOOR 8
#define SENDDIRCMD_LEDILLU 9
#define SENDDIRCMD_LEDCOIN 10
#define SENDDIRCMD_LEDTICKET 11
#define SENDDIRCMD_LEDPAD 12
#define SENDDIRCMD_LEDSTART 13
#define SENDDIRCMD_LEDINSIDE 14
//#define SENDDIRCMD_LED_ALL 15
#define SENDDIRCMD_FAN 16
#define SENDDIRCMD_LAERM 17
#define SENDDIRCMD_REL1 18
#define SENDDIRCMD_WAKEPTU 20
#define SENDDIRCMD_AUXPWR 21
#define SENDDIRCMD_AUXDDR 22
#define SENDDIRCMD_AUXOUT 23
#define SENDDIRCMD_UCONTACT_ON 30
#define SENDDIRCMD_PRN2_SWONOFF 31
#define SENDDIRCMD_MIF_SWONOFF 32 // 0x2900
#define SENDDIRCMD_MIF_ATBCREATE 33 // 0x2907
#define SENDDIRCMD_MOD_SWONOFF 40
#define SENDDIRCMD_MOD_WAKE 41
#define SENDDIRCMD_MDB_POWER 42
#define SENDDIRCMD_MDB_WAKE 43
#define SENDDIRCMD_CRED_ON 44
#define SENDDIRCMD_CRED_WAKE 45
#define SENDDIRCMD_SHUT_MOV 50
#define SENDDIRCMD_ESCRO_MOV 51
#define SENDDIR_OPENVAULT 52
#define SENDDIR_REJMOT_ON 53
#define SENDDIR_REJMOT_RUN 54
// Level 2 (serial from DC to devices)
#define SEND_REQU_SERCONF 100
#define SEND_REQU_HWversion 101
#define SEND_REQU_SWversion 102
#define SEND_REQU_CONDITION 103
#define SEND_REQU_UID 104
#define SEND_REQU_TIME 105
// includes wake frequency
#define SEND_REQU_ANALOGS 110
#define SEND_REQU_DIG_INPUTS 111
#define SEND_REQU_DIG_OUTPUTS 112
#define SEND_REQU_PRN_STATE 120
#define SEND_REQU_PRN_FONTS 121
#define SEND_REQU_PRN_ALL 122
#define SEND_REQU_MIFSTATE 123
// Type and state of reader
#define SEND_REQU_MIFDATA 124
// Type, UID, Header of card
// read one card sector
// sectors must be addressed by RD_ADD
#define SEND_REQU_MIF_ATB_TYPE 125
#define SEND_REQU_MDB_GETSTAT 126
//#define SEND_REQU_MDB_GETWAK 127
#define SEND_REQU_MDB_GETRESP 128
#define SEND_REQU_EMP_GETALL 129
#define SEND_REQU_EMP_GETCOIN 130
#define SENDDIRCMD_DEVICE_PARA 131
#define SENDDIRCMD_MACHINE_ID 132
#define SEND_REQU_DEVICE_PARA 133
#define SEND_REQU_MACINE_ID 134
// further: mdb state, coinchecker state, bill state, modem state, credit_state....
#define SENDDIRCMD_SHUTOPENBYTIME 60
#define SENDDIRCMD_SHUTOPENBYCOIN 61
//#define SENDDIRCMD_SHUT_SENDTIME 62
#define SENDDIRCMD_ESCRO_TAKE 63
#define SENDDIRCMD_ESCRO_GIVE 64
#define SENDDIRCMD_PRN_SYS_CMD 70
#define SENDDIRCMD_PRN_ESC_CMD 71
#define SENDDIRCMD_PRN_SETUP 72
#define SENDDIRCMD_PRN_MOVE 73
#define SENDDIRCMD_PRN_SETFONT 74
#define SENDDIRCMD_PRN_SETLETT 75
#define SENDDIRCMD_PRN_CUT 76
//#define SENDDIRCMD_PRN_TXT // not needed
#define SENDDIRCMD_PRN_LF 78
#define SENDDIRCMD_PRN_FONTTAB 79
#define SENDDIRCMD_PRN_BC 80
#define SENDDIRCMD_PRN_QR 81
#define SENDDIRCMD_PRN_STOREDQR 82
#define SENDDIRCMD_PRN_LOGO_FL 83
//#define SENDDIRCMD_PRN_LOGO_GRAF 84
//#define SENDDIRCMD_PRN_LOGODAT 85
//#define SENDDIRCMD_PRN_STORBC 86
#define SENDDIRCMD_PRN_STORQR 87
#define SENDDIRCMD_PRN_DOC 88
#define SENDDIRCMD_PRN_CLEARDOC 89
//#define SENDDIRCMD_MDB_POWER 42
//#define SENDDIRCMD_MDB_WAKE 43
#define SENDDIRCMD_MDB_RES 90
#define SENDDIRCMD_MDB_SENDCMD 91
#define SENDDIRCMD_MDB_SNDMSG 92
#define SENDDIRCMD_EMP_SETT 93
#define SENDDIRCMD_EMP_POLL 94
#define SENDDIRCMD_EMP_STARPPAY 95
#define SENDDIRCMD_EMP_STOPPAY 96
// obsolete:
#define SENDDIRCMD_PRN1_SENDTEXT 54
#define SENDDIRCMD_PRN1_SENDCMD 55
#define SENDDIRCMD_PRN1_SERPAR 56
#define SENDDIRCMD_PRN_LEVEL2_4B 58
#define SENDDIRCMD_PRN_LEVEL2_64 59
// highest priority
#define CMDSTACKDEPTH 16
// means: up to 16 cmd can be stored. They are issued one by one every 100ms
void sendWRcmd_clrCmdStack(void);
bool sendWRcmd_setSendCommand0(uint16_t nextCmd);
// GUI or app sends a command to DC transfered by serial
uint16_t sendWRcmd_getSendCommand0(void);
// lower priority
#define CMD4STACKDEPTH 8
void sendWRcmd_clrCmd4Stack(void);
bool sendWRcmd_setSendCommand4(uint16_t nextCmd, uint8_t dat1, uint8_t dat2, uint8_t dat3, uint8_t dat4);
uint16_t sendWRcmd_getSendCommand4(uint8_t *dat1, uint8_t *dat2, uint8_t *dat3, uint8_t *dat4);
#define CMD8STACKDEPTH 4
void sendWRcmd_clrCmd8Stack(void);
bool sendWRcmd_setSendCommand8(uint16_t nextCmd, uint8_t dat1, uint8_t dat2, uint16_t dat3, uint32_t dat4);
uint16_t sendWRcmd_getSendCommand8(uint8_t *dat1, uint8_t *dat2, uint16_t *dat3, uint32_t *dat4);
// lowest priority
// wait for resonse before send next!
bool sendWRcmd_setSendBlock160(uint8_t leng, uint8_t *buf);
uint8_t sendWRcmd_getSendBlock160(uint8_t *leng, uint8_t *buf);
// retval = *leng
void sendWRcmd_INI(void);
uint8_t epi_store64ByteSendData(uint8_t length, uint8_t *buf);
// HWapi writes data to be forwarded to DC and further to mdb-device
// not batched! don't use twice within 100ms
uint8_t gpi_restore64ByteSendData(uint8_t *length, uint8_t *buf);
// datif reads data to forward to dc
// ONE printer doc consists of 20 x 64 byte
#define MAXNROF_PRNBYTES 64
#define MAXNROF_PRNBLOCKS 20
void epi_resetPrinterStack(void);
uint8_t epi_storePrnText(char *buf, uint8_t leng);
// store text and binary data from Gui in next higher free memory 0....9
uint8_t gpi_restorePrnText(uint8_t *retbuf);
// read printer text and send to slave, size of retbuf== 64
uint8_t gpi_chk4remainingText(void);
// retval: 0: no more textline left (to send) >0: nr of lines
void epi_storeUserOfSendingTextBuffer(uint8_t user, uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4 );
// user=1: Text-Print is using this buffer
// 2: QR-code-Printer is using this buffer
uint8_t gpi_getUserOfSendingTextBuffer(uint8_t *para1, uint8_t *para2, uint8_t *para3, uint8_t *para4);
// user=1: Text-Print is using this buffer
// 2: QR-code-Printer is using this buffer
#define FDCMD_STACKDEPTH 16
void sendFDcmd_clrStack(void);
bool sendFDcmd_set(uint8_t nextWrCmd, uint8_t nextRdCmd, uint8_t blockNum, uint8_t dat1, uint8_t dat2, uint8_t dat3, uint8_t dat4);
// write Command to memory, wait for transport
bool sendFDcmd_get(uint8_t *nextWrCmd, uint8_t *nextRdCmd, uint8_t *blockNum, uint8_t *dat1, uint8_t *dat2, uint8_t *dat3, uint8_t *dat4);
uint8_t check4FDshortCmd(void);
// returns number of waiting command, maxFDCMD_STACKDEPTH
uint8_t check4freeFDshortCmd(void);
// returns number of free places in short-command stack
#define FDLONG_STACKDEPTH 16
void longFDcmd_clrStack(void);
bool longFDcmd_set(uint8_t nextWrCmd, uint8_t nextRdCmd, uint8_t blockNum, uint8_t length, uint8_t *data);
// write Command to memory, wait for transport
// data buffer size always 64! data[64], padded with 0
bool longFDcmd_get(uint8_t *nextWrCmd, uint8_t *nextRdCmd, uint8_t *blockNum, uint8_t *length, uint8_t *data);
uint8_t check4FDlongCmd(void);
// returns number of waiting command
uint8_t check4freeFDlongCmd(void);
// returns number of free places in long-command stack
#endif