ATBUpdateTool/DCPlugin/include/prot.h

130 lines
4.2 KiB
C++

#ifndef SERIAL_FRAME_H
#define SERIAL_FRAME_H
#include <stdint.h>
#include <QMainWindow>
#include <QString>
#include <QTimer>
#include "tslib.h"
#include "com.h"
/*
get's OUT-data from datif,
get's IN-data from datif
get's send command from datif
makes frame and calls: isSerialFree(), setSendData(),
if not free retrigger datif sending period (normally 500ms or 50ms for direct cmds)
with control-signal: gotReceiveData():
getRecData();
send results to diag window/line
send IN-data to datif
*/
#define FRAME_DATALEN 64
#define FRAME_MAXLEN FRAME_DATALEN+20
#define BL_DATA_LEN 150
#define DATALEN_SEND_FAST 4
#define DATALEN_SEND_LONG 64
#define HEADERLEN_SEND 4
#define TELEGRAMLEN_SEND_FAST 12
#define TELEGRAMLEN_SEND_LONG 70
#define STARTSIGN_SEND_FAST 0x3F
#define STARTSIGN_SEND_LONG 0x3D
#define DATALEN_RECEIVE_FAST 8
#define DATALEN_RECEIVE_LONG 64
#define HEADERLEN_RECEIVE 2
#define TELEGRAMLEN_RECEIVE_FAST 12
#define TELEGRAMLEN_RECEIVE_LONG 68
#define STARTSIGN_RECEIVE_FAST 0x5F
#define STARTSIGN_RECEIVE_LONG 0x5D
class T_prot : public QMainWindow
{
Q_OBJECT
// Dateneingang von Datif:
uint8_t SendDataValid; // bit1: WR OK bit 2: RD OK
uint16_t slaveAddr;
uint16_t WriteCommand;
uint16_t WriteAddr;
uint8_t WrDataLength;
uint8_t ui8OutputData[FRAME_DATALEN];
char chOut_Data[FRAME_DATALEN];
uint8_t kindOfData; // 0: binaries, 1:text
uint16_t ReadCommand;
uint16_t ReadAddr;
uint16_t reserve;
// Ausgangs-Daten, werden vom Datif geholt:
// nur wenn CommandState und readState OK
uint8_t RecSlaveAddr;
bool INdataValid; // nur true wenn CommandState OK und readState OK
uint16_t readSource; // diese (Eingangs-)Daten stehen im Puffer
uint16_t readAddress; // von dieser Adr wurden die Daten gelesen
//uint8_t lastWakeSrc; // falls der Slave den Master geweckt hat
uint8_t RdDataLength;
uint8_t InputData[FRAME_DATALEN];
// 11.11.2020:
uint8_t BLsendDataLength;
uint8_t ui8BLsendData[BL_DATA_LEN];
T_com *mySerialPort;
void startPacking(void);
void startFastPacking(void);
uint8_t FramecheckInData(uint8_t *Inbuf, uint16_t LL);
uint8_t FastCheckInData(uint8_t *Inbuf, uint16_t LL);
uint8_t CheckInResult(uint8_t *Inbuf);
uint8_t ShowFastInData(uint8_t *recBuffer);
uint8_t ShowInData(uint8_t *recBuffer); // was CheckInData
void setRecLen(uint16_t WriteCmd);
private slots:
void analyseRecData(void);
public:
T_com *getSerialPort() { return mySerialPort; }
T_com const *getSerialPort() const { return mySerialPort; }
T_prot();
bool isPortOpen(void);
bool isSerialFree(void);
void setUserWriteData(uint16_t WriteCmd, uint16_t WrAddr, uint8_t WrDatLen, uint8_t *data);
void setUserWriteData(uint16_t WriteCmd, uint16_t WrAddr);
void setUserWriteData(uint16_t WriteCmd);
void setUserWriteText(uint16_t WriteCmd, uint16_t WrAddr, uint8_t WrDatLen, char *data);
void setUserWrite1DB(uint16_t WriteCmd, uint16_t WrAddr, uint8_t val);
void setUserWrite2DB(uint16_t WriteCmd, uint16_t WrAddr, uint8_t val0, uint8_t val1);
void setUserReadData( uint16_t ReadCmd, uint16_t RdAddr, uint16_t reserv);
void setUserReadData( uint16_t ReadCmd, uint16_t RdAddr);
void setUserReadData( uint16_t ReadCmd);
void setBLsendData( uint8_t len, uint8_t *buf);
void receiveFixLen(int64_t nrOfbytesToReceive);
void sendUserData(uint16_t slaveAdr);
bool ifDataReceived();
bool getReceivedInData(uint8_t *SlavAddr, uint16_t *readSrc, uint16_t *readAddr,
uint8_t *RdDlen, uint8_t *receivedData);
// retval: data valid, only one time true
signals:
void framerecieved(); //bool gotINdata);
void rawDataRecieved();
};
#endif // T_prot_H