From fdd32cea9299e05a53254c7ebcda4c85622597f5 Mon Sep 17 00:00:00 2001 From: Siegfried Siegert Date: Thu, 22 Jun 2023 18:16:41 +0200 Subject: [PATCH] Remove interfaces.h for update interfaces.h --- plugins/interfaces.h | 1351 ------------------------------------------ 1 file changed, 1351 deletions(-) delete mode 100755 plugins/interfaces.h diff --git a/plugins/interfaces.h b/plugins/interfaces.h deleted file mode 100755 index eece63e..0000000 --- a/plugins/interfaces.h +++ /dev/null @@ -1,1351 +0,0 @@ -#ifndef INTERFACE_H -#define INTERFACE_H - -#include - - -#define THIS_IS_CA_MASTER -// undef for slvae - - -struct T_emp -{ - - // Fixdata from EMP: - uint8_t shaft; // = changer level - uint16_t countryCode; - uint8_t scale; - uint8_t decimals; - uint8_t coinValues[16]; - uint16_t routing; - - // Master specs: - uint8_t gotSetup; // 1: got specifications from master 0: no specs - uint16_t coinAccept; // bit 0 = coin1 bit H=accept - uint8_t tokenChannel; - uint16_t denomination[16]; - - // dynamic: - uint8_t state; // step counter of EMP (electronic coin checker) FSM (finite state machine): - // 0=start command - // 1=powered, do emp ini, send reset - // 2=delay - // 3=wait for response, requesting status after response - // 4,5 through, startup - // 6: wait for status - // 7: through, startup - // 8: IDLE state. EMP is up and ready, polling is running - // 9: polling on, payment not yet on - // 10: payment, check coins - // 11: through - // 12: wait 1s for last coin - // 90: stop all, 1s delay - // 99: off, all stopped - - - uint8_t pollingRunning; - uint8_t paymentRunning; - -}; - -struct Trtc_DateTime -{ - uint8_t rtc_hour; - uint8_t rtc_min; - uint8_t rtc_sec; - uint8_t rtc_dayOfMonth; - uint8_t rtc_month; - uint8_t rtc_year; - uint8_t rtc_dayOfWeek; -}; - -struct Tprn_hw_state -{ - // hardware (IO's) - bool powerRdBk; // prn pwr is on - bool rsSwOk; // serial switch (printer or modem) is set to printer - bool rsDrvOk; // RS232 converter for PTU, Printer and Modem in on - - bool ReadyLine; // HW signal from printer showing ready - bool inIdle; // powered and free from errors - bool paperNearEnd; // paper roll runs out - bool noPaper; - bool ErrorTemp; - bool HeadOpen; - bool cutterJam; - bool noResponse; // printer is not connected, cable broken, wrong baudrate - bool badResponse; -}; - - struct Tprn_currentSettings -{ - uint8_t currFont; - uint8_t currSize; - uint8_t currHeigth; - uint8_t currWidth; - bool nowBold; - bool nowInvers; - bool nowUnderlined; - uint8_t currDensity; - uint8_t currSpeed; - bool nowAligned; -}; - -// obsolete - struct T_dynDat -{ - uint8_t licensePlate[8]; - uint8_t vendingPrice[8]; - uint8_t parkingEnd[8]; - uint8_t currentTime[8]; - uint8_t currentDate[8]; - uint8_t dynDat5[8]; - uint8_t dynDat6[8]; - uint8_t dynDat7[8]; -}; - - -struct T_vaultRecord -{ - - // Kassenbeleg (Abrechnungsdatensatz = Kassenwechsel-Datensatz) - char startbuffer[4]; // Psa> // never move or change this 1st entry - uint16_t AccountingNumber; - uint16_t CUNU; - uint16_t MANU; - uint16_t resint1; - //uint16_t resint2; - - char label1buffer[4]; // tim> - uint8_t year; - uint8_t month; - uint8_t dom; - uint8_t hour; - uint8_t min; - uint8_t sec; - uint8_t DoW; - uint8_t reschar3; - - char label2buffer[4]; // abs> - uint32_t AbsIncome1; - uint32_t AbsReserve; - uint32_t AbsNrOfCuts; - -//16 - char label3buffer[4]; // mw > - - // Verkauf, Tür zu: - uint32_t VKcoinsInserted[16]; // nur für Wechsler, soviel wurde eingeworfen - uint32_t VKcoinsReturned[6]; // nur für Wechsler, Anzahl Münzen pro Typ, soviel wurde zurückgegeben -//88 - - // Service, Tür offen: - uint16_t ServCoinsInserted[16]; // nur für Wechsler, soviel wurde eingeworfen - uint16_t ServCoinsReturned[6]; // nur für Wechsler, Anzahl Münzen pro Typ, soviel wurde zurückgegeben - uint16_t resint3; - uint16_t resint4; - uint16_t currentTubeContent[6]; // nur für Wechsler, aktueller Füllstand - uint16_t resint5; - uint16_t resint6; -// 56 - - char label4buffer[4]; // box> - uint16_t coinsInVault[16]; - uint16_t billsInStacker[8]; -// 48 - - char label5buffer[4]; // val> - // actually constant unless exchange rate is changed - uint16_t coinDenomination[16]; // 5..50000 (z.B. 2? sind in Ungarn 760Ft) - uint16_t billDenom[8]; - uint16_t tubeDenom[6]; - uint16_t exchangeRate; - uint16_t resint9; - -// 64 - - char endofblock[4]; // end> - -// 316 byte Block im Speicher - -}; - -struct T_moduleCondition -{ - // store conditon of all system components, hold in RAM - // 0 means unknown, not yet tested/used - // 1 means OK - // 50..99 = HINT / Notification - // 100..150 = WARNING - // 200..250 = ERROR - - uint8_t ram; - uint8_t intEe; - uint8_t extEe; - - uint8_t rtc; // 1: time/date OK 100: time not plausible 200: hardware error - uint8_t boardHw; - uint8_t printer; - uint8_t modem; - - uint8_t signal; // 1...99 - uint8_t regist; // 100:not 1:reg 2:ping OK 3:gotTime - uint8_t mdbBus; - uint8_t coinChecker; // EMP, OMP or mei-cashflow - - uint8_t coinEscrow; - uint8_t mifareReader; - uint8_t creditTerm; - uint8_t coinReject; - - uint8_t coinSafe; - uint8_t billSafe; - uint8_t voltage; // 1:11..14V - uint8_t temper; - - uint8_t poweronTest; - uint8_t doorState; // 1: alles zu 200: t?r offen + bit1(S) +bit2(CB) + bit3(CB) - uint8_t doorWasOpened; // 1: all doors are closed 200: any door was just opened - uint8_t changer; // can only be tested by usage - - uint8_t coinBlocker; // can only be tested by usage - uint8_t billReader; // can only be tested by usage - uint8_t ResetReason; - uint8_t allModulesChecked; - - uint8_t alarmState; - uint8_t res11; - uint8_t res12; - uint8_t res13; -// 31 -}; - -struct T_dynamicCondition -{ - char allDoorsDebounced; - char openedAuthorized; - uint8_t CBinDebounced; // 0:fehlt 1:drin - char upperDoor; // 99: undefined 0:closed 1:open - char middleDoor; // 99: undefined 0:closed 1:open - char lowerDoor; // 99: undefined 0:closed 1:open - char reserve; - char billBox; - char modeAbrech; - char onAlarm; // 0:alarm aus 1:alarm 2:alarm mit Sirene 3: Sirenentest - char nowCardTest; - char nowPayment; // not used, always 0 - char lastMifCardType; - uint8_t lastSDoorState; - uint8_t lastVDoorState; - uint8_t lastCBstate; - char paymentInProgress; - // 0: stopped by timeout - // 1: running 2: wait4lastCoin - // 3: payment stopped manually, coins in Escrow - // 4: payment stopped autom, amount collected, coins in Escrow - // 5: payment stopped, escrow full, coins in Escrow - // 6: coins encashed 7:coins returned - // 8: CoinChecker or MDB on Error - - - char res1; - uint16_t U_Batt; - uint16_t Temperatur; - uint16_t nrCoinsInBox; - uint32_t amountInBox; - uint32_t totalTransVolume; - uint32_t totalNrOfVends; - char jsonValid_config; - char jsonValid_device; - char jsonValid_cash; - char jsonValid_print; - char jsonValid_serial; - char jsonValid_time; - char lastFileType; -// 44 - uint8_t MifCardHolder[8]; - uint8_t resultOfLastTemplPrint; - // 0: unknown or printing in progress - // 1: OK, doc was printed 2: error, doc was not printed - uint8_t lastPrinterStatus; - // 0: printer OK - // bit0: near paper end bit1: no paper - // bit2: temperature error bit3: error head open - // bit4: paper jam in cutter - // bit6: no response bit7: serial rec. error - // bit5: printer not ready - uint8_t startupTestIsRunning; - - //54 -}; - -struct T_extTime -{ - uint8_t Hours; - uint8_t Min; - uint8_t Sec; - uint8_t Year; - uint8_t Month; - uint8_t Day; - uint8_t DOW; - uint8_t res1; - uint16_t MinOfDay; - uint16_t res2; - uint32_t SecOfDay; - uint8_t isLeapYear; - uint8_t nxtLeapYear; - uint8_t lastLeapYear; - uint8_t hoursOfThisWeek; - uint16_t minutesOfThisWeek; - uint16_t hoursOfThisMonth; - uint16_t daysOfThisYear; - uint16_t GetHoursOfYear; - uint16_t res3; - uint32_t GetMinutesOfYear; - uint8_t getWakeIntvSec; - uint8_t res4; - uint16_t res5; - uint32_t MinutesOfMillenium; - -}; - - -typedef uint8_t UCHAR; -typedef uint16_t UINT; - -struct T_devices -{ - // set by master, used(1) or notused (0) or type 2....20 - - UCHAR kindOfPrinter; // 0:off 1:Gebe - UCHAR kindOfCoinChecker; // 0: without 1=EMP820 2=EMP900 3=currenza c² (MW) - UCHAR kindOfMifareReader; // by now only stronglink SL025 =1 - UCHAR suppressSleepMode; // 0:sleep allowed 1: no sleep - - UCHAR kindOfModem; // 0:off 1:Sunlink - UCHAR kindOfCreditcard; // 0:off 1:Feig NFC - UCHAR CoinEscrow; - UCHAR CoinRejectUnit; - - UCHAR CoinShutter; - UCHAR BillAcceptor; - UCHAR usevaultLock; - UCHAR autoAlarm; // 1: switch on siren for 1min in doors opened unauthorized - - UCHAR autoOpen; // 1: open door covers after valid ATBcard - UCHAR printAccReceipt; // 0/1 - UCHAR printDoorReceipt; - UCHAR printTokenTicket; - - UINT VaultFullWarnLevel; - UINT VaultFullErrorLevel; - -}; - - - -class hwinf -{ - -public: - virtual ~hwinf() {} - - - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // Use serial interface and protocol stack in Cashagent-Library - // Sending Output data to DeviceController DC2b - // Sending input requests to DC2 (single or auto-batch) - // Getting input data as receiver payload - // Furthermore the Cashagent-Library answers with status strings about sending and reading result - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - -#ifdef THIS_IS_CA_MASTER - virtual bool dc_openSerial(int BaudNr, QString BaudStr, QString ComName, uint8_t connect) const =0; - // Command: open serial interface - // BaudNr: 0:1200 1:9600 2:19200 3:38400 4:57600 5:115200 - // BaudStr: for exapmle "19200" - // ComName: for example "COM48" - // connect: 0, 1 - - virtual void dc_closeSerial(void) const =0; - // Command: close serial interface in order to save power while power down - // or if another port must be used -#endif - - virtual bool dc_isPortOpen(void) const =0; - // returns true if port open (don't send unless open. Sending to closed port will crash program) - - virtual void dc_autoRequest(bool on) const =0; - // on = true: select that all READ-Requests are sent automatically - // on = false: select that all READ-Requests are sent manually one by one - // Every input information from DC2 must be requested - // ( digital and analog sensors, get time/date, get status information ) - - virtual void dc_requTestResponse() const =0; - // tell DC2 to send a test-string, useful to see if cable and baudrate is OK - - virtual bool dc_readAnswTestResponse() const =0; - // retval: true: test was successful, got right response - - virtual uint8_t dc_isRequestDone(void) const =0; - // retval: 0: request is still in progress - // 1: answer from DC2 was OK - // 2: wrong answer from DC2 - - virtual uint16_t dc_getCompletePayLoad(uint16_t plBufSiz, uint8_t *payLoad) const =0; - // get data back in "payLoad", max 64 byte, can be used for diagnosis - // retval = nr of bytes received. If host buffer too small then - // only plBufSiz bytes are copied to "payLoad" - // plBufSiz­z=size of host buffer - - virtual void dc_setWakeFrequency(uint8_t period) const =0; - // RTC wakes DC2 (and PTU) by hardware signal every 32seconds - // change wake signal period to 1...64s - - virtual void dc_OrderToReset(void) const =0; - // want DC2 to reset (in order to start Bootloader) - -#ifdef THIS_IS_CA_MASTER - virtual QString dc_getSerialState(void) const =0; - // get result of opening-command like "ttyS0 opened with 115200 8N1! - // or error messages like "comport not available..." - // was saved by last opening event, can be passed for 100ms - - virtual void dc_clrSerialStateText(void) const =0; - // clear above text to avoid multiple repetive displaying -#endif - - virtual void bl_sendDataDirectly(uint8_t length, uint8_t *buf) const =0; - // send without protocol frame, needed for the DC bootloader - - virtual uint8_t getRawRecLength(void) const =0; - // only needed if protocol stack in Cashagent-Library is bypassed - - virtual uint8_t getRawReceivedData(uint8_t *receivedData) const =0; - // only needed if protocol stack in Cashagent-Library is bypassed - - virtual QString dc_getSerialParams(void) const =0; - // get DC2 serial settings (not very meaningful as they will not come if different from master settings) - - virtual QString dc_getHWversion(void) const =0; - // get DC2 hardware version - - virtual QString dc_getSWversion(void) const =0; - // get DC2 software version - - virtual QString dc_getState(void) const =0; - // get DC2 status (every OK or any error/warning? ) - - -// ---------------------------------------------------------------------------------------------------------- -// Date and Time -// ---------------------------------------------------------------------------------------------------------- - - virtual uint8_t rtc_getDateTime(struct Trtc_DateTime *rtc_DateTime) const =0; - - virtual uint8_t rtc_setDateTime(void) const =0; - // synch DC2 with PC or PTU system time and date - - virtual void rtc_getTime(uint8_t *hh, uint8_t *mm, uint8_t *ss) const =0; - // get time directly - - virtual void rtc_getDate(uint8_t *yy, uint8_t *mm, uint8_t *dd) const =0; - // get date directly - - virtual uint8_t rtc_getToday(uint8_t *dow, uint16_t *minOfToday, uint32_t *secOfToday) const =0; - // dow=day of week, 1=monday...7 - // minOfToday: 0=midnight...1439= 23:59 - // secOfToday: 0=midnight...86399= 23:59:59 - - virtual bool rtc_isLeapYear(uint8_t *lastLeapYear, uint8_t *NextLeapYear) const =0; - // retval true: this year is leap year - - virtual bool rtc_isLeapYear() const =0; - - virtual void rtc_getWeek(uint8_t *DayOfWeek, uint8_t *HoursOfWeek, uint16_t *MinutesOfWeek) const =0; - // DayOfWeek: 1=monday...7 - // HoursOfWeek: 0=Monday 0:00 o'clock...167=Sunday 23:00 - // MinutesOfWeek: 0=Monday 0:00 o'clock...10079=Sunday 23:59 - - virtual void rtc_getMonth(uint8_t *DayOfMonth, uint16_t *HoursOfMonth, uint16_t *MinutesOfMonth) const =0; - // DayOfMonth: 1...31 - // HoursOfMonth: 0 = 0:00o'clock of 1.day in month up to 743 - // MinutesOfMonth:0 = 0:00o'clock of 1.day in month up to 44639 - - virtual void rtc_getYear(uint16_t *DayOfYear, uint16_t *HoursOfYear, uint32_t *MinutesOfYear) const =0; - // DayOfYear: 1...366 1= 1.Jan of this current year - // HoursOfYear: 0=1.Jan 0:00o'clock ...8783=31.12 23 o'clock - // MinutesOfYear: 0=1.Jan 0:00o'clock ...527039=31.12 23:59 o'clock - - virtual QString rtc_getTimStr(void) const =0; - virtual QString rtc_getDatStr(void) const =0; - virtual QString rtc_getTimDatStr(void) const =0; - - - // UID - unique number, different in every DC - virtual void dc_getUID8byte(uint8_t *buf8byteUid) const =0; - // get 8 single bytes in buffer - - virtual QString dc_getUIDstr() const =0; - // get as string - - virtual uint64_t dc_getUIDnumber(void) const =0; - // get UID as one long number - -// ---------------------------------------------------------------------------------------------------------- -// analogs -// ---------------------------------------------------------------------------------------------------------- - - // Analog values: - virtual uint32_t dc_getTemperature(void) const =0; - // in Sax-Format 0...400 (0=-50,0°C 100=0,0°C 141=20,5°C 400=150,0°C) - - virtual QString dc_getTemperaturStr(void) const =0; - // as string like "-12,5°C" - - virtual uint32_t dc_getVoltage(void) const =0; - // as value in mV, 0...65,535V - - virtual QString dc_getVoltagStr(void) const =0; - // as string in mV - - virtual bool dc_mainFuseIsOk(void) const=0; - // true if 12V fuse is OK - // false: fuse blown, DC will continue working but no 12V device can be used! - -// ------------------------------------------------------------------------------ -// digital outputs -// ------------------------------------------------------------------------------ - - virtual uint8_t lock_switchUpperLock(uint8_t dir) const =0; - // dir 0=off 1=up 2=down - // move lock until stop cmd (0) - - virtual uint8_t lock_switchLowerLock(uint8_t dir) const =0; - // dir 0=off 1=up 2=down - // move lock until stop cmd (0) - - virtual void lock_switchVaultDoor(void) const =0; - - virtual void coin_switchRejectMotor(uint8_t dir) const =0; - - virtual void coin_rejectCoins(void) const =0; - - // LEDs - virtual void led_switchLedService(uint8_t on) const =0; - virtual void led_switchLedPaper(uint8_t on, uint8_t ton, uint8_t tof) const =0; - virtual void led_switchLedPinPad(uint8_t on, uint8_t ton, uint8_t tof) const =0; - virtual void led_switchLedStart(uint8_t on, uint8_t ton, uint8_t tof) const =0; - virtual void led_switchLedCoinbassin(uint8_t on, uint8_t ton, uint8_t tof) const =0; - - virtual void fan_switchFan(bool on) const =0; - virtual void alarm_switchSiren(bool on) const =0; - virtual void bar_OpenBarrier(bool open) const =0; - virtual void ptu_switchWake(bool WAKEACTIVE) const =0; - - virtual void aux_power(bool on) const =0; - virtual void aux_setUsage(uint8_t PinDirection) const =0; - virtual void aux_setOutputs(uint8_t PinIsHigh) const =0; - - virtual void lock_switchContactPower(bool on) const =0; - - virtual void prn_switchPower(bool on) const =0; - - virtual void mif_readerOn(bool on) const =0; - - virtual void mif_creatAtbCard(uint8_t cardType) const =0; - - virtual void mod_switchPower(bool on) const=0; - - virtual void mod_switchWake(bool WAKEACTIVE) const=0; - - virtual void mdb_switchPower(bool on) const =0; - - virtual void mdb_switchWake(bool WAKEACTIVE) const =0; - - virtual void credit_switchPower(bool on) const =0; - // the same as modem power - - virtual void credit_switchWake(bool WAKEACTIVE) const =0; - - virtual void shut_move(bool open) const =0; - - virtual void esc_moveFlaps(uint8_t flap ) const =0; - // 0: close both 1: open take-flap 2: open return - - -// ------------------------------------------------------------------------------ -// door, cashbox and lock switches -// ------------------------------------------------------------------------------ - - virtual uint8_t door_getSwitches(void) const =0; - // retval: bit0: upper door 1: low door 2:vault door - - virtual bool door_isUpperDoorOpen(void) const =0; - - virtual bool door_isLowerDoorOpen(void) const =0; - - virtual bool vault_isVaultDoorOpen(void) const =0; - - virtual uint8_t vault_getSwitches(void) const =0; - // retval bit0: cash box, bit 1: bill box - - virtual bool vault_isCoinVaultIn(void) const =0; - - virtual bool vault_isBillVaultIn(void) const =0; - - virtual uint8_t door_getLocks(void) const =0; - // retval bit0: upper lever is up (=open) - // bit1: upper lever is down (=locked) - // bit2: lower lever is up - // bit3: lower lever is down (=locked) - - virtual bool door_upperDoorIsLocked(void) const =0; - - virtual bool door_upperDoorIsUnlocked(void) const =0; - - virtual bool door_lowerDoorIsLocked(void) const =0; - - virtual bool door_lowerDoorIsUnlocked(void) const =0; - - virtual bool bar_optoIn1isOn(void) const =0; - - virtual bool bar_optoIn2isOn(void) const =0; - - virtual uint8_t aux_getAuxInputs(void) const =0; - - virtual bool ptu_WakeINisActive(void) const =0; - - virtual bool mdb_WakeINisActive(void) const =0; - - virtual bool prn_readyINisActive(void) const =0; - - virtual bool coid_isAttached(void) const =0; - - virtual bool coin_escrowIsOpen(void) const =0; - - virtual bool mif_cardIsAttached(void) const =0; - -//bool hwapi::mod_WakeINisActive(void); - - virtual bool door_isContactPowerOn(void) const =0; - - virtual bool mif_isMifarePowerOn(void) const =0; - - virtual bool mdb_testIsmdbTxDon(void) const =0; - - virtual bool aux_isAuxPowerOn(void) const =0; - - virtual bool mod_isGsmPowerOn(void) const =0; - - virtual bool cred_isCreditPowerOn(void) const =0; - - virtual bool prn_isPrinterPowerOn(void) const =0; - - virtual uint8_t prn_PrnFuseIsOk(void) const=0; - //retval: 0: fuse blown 1: fuse OK 2:unknown as printer power is off - - virtual bool mdb_isMdbPowerOn(void) const =0; - - virtual bool cash_getRejectMotorHomePos(void) const=0; - - virtual uint8_t cash_getLowPaperSensor(void) const=0; - // 0: Sensor sees paper 1: no paper 99: off - - - // ------------------------------------------------------------------------------ - // request commands - // ------------------------------------------------------------------------------ - - // all read-requests can be sent manually by the following functions - // or automatically in background by: void hwapi::dc_autoRequest(bool on) - - - virtual void request_DC2serialConfig() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - - virtual void request_DC2_HWversion() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_SWversion() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_condition() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_UID() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_TimeAndDate() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_analogues() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_digitalInputs() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_digitalOutputs() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - - // ------------------------------------------------------------------------------ - - // the following device state requests are deployed only if device is powered up: - virtual void request_PrinterHwState() const =0; - virtual void request_PrinterCurrentFonts() const =0; - virtual void request_PrinterStateComplete() const =0; - - virtual void request_MifareReaderState() const =0; - virtual void request_MifareCardType() const =0; - virtual void request_MifareAtbType() const =0; - virtual void request_MifareID() const =0; - virtual void request_MifareData(uint8_t dataBlockNumber) const =0; - //virtual void request_MifareData() const =0; - - virtual void request_MDB_Status() const =0; - virtual void request_MDB_lastResponse() const =0; - virtual void request_EMP_allParameters() const =0; - virtual void request_EMP_lastCoin() const =0; - - - // ------------------------------------------------------------------------------ - // readback digital outputs of connected devices - // these functions are not needed for normal operation - // but can be used to test and verify conditions - // ------------------------------------------------------------------------------ - - - virtual bool test_getDO_mdbRXtst(void) const =0; - // readback digital outputs of connected devices - // these functions are not needed for normal operation - // but can be used to test and verify conditions - - virtual uint8_t lock_getDO_motors(void) const =0; - // bit0: upper lock forward bit 1 backward - // bit2: lower lock forward bit 3 backward - - virtual uint8_t test_serialState(void) const =0; - // test on-board signals for the serials - // serial drv on/off, Serial mux1, Serial mux2 - - virtual bool test_serialIsOn(void) const =0; - - virtual bool test_serialMux1isSetToPrinter(void) const =0; - virtual bool test_serialMux1isSetToModem(void) const =0; - virtual bool test_serialMux2isSetToCredit(void) const =0; - virtual bool test_serialMux2isSetToMifare(void) const =0; - - virtual bool led_coinIsOn(void) const =0; - virtual bool led_frontIsOn(void) const =0; - virtual bool led_ticketIsOn(void) const =0; - virtual bool led_pinIsOn(void) const =0; - virtual bool led_StartIsOn(void) const =0; - virtual bool led_insideIsOn(void) const =0; - - virtual bool fan_isOn(void) const =0; - virtual bool siren_isOn(void) const =0; - virtual bool bar_relayIsOn(void) const =0; - virtual bool ptu_WakeOutIsOn(void) const =0; - - virtual bool aux_powerIsOn(void) const =0; - - virtual bool coin_shutterIsOpen(void) const =0; - virtual bool coin_shutterTestOutput(void) const =0; - - virtual uint8_t coin_escrowFlapOpened(void) const =0; - // retval: 1:return flap is open 2:take flap is open 0:closed - - - -// ------------------------------------------------------------------------------ -// devices are operated by DC -// processes with more then one devices -// timer controlled or long term processes -// ------------------------------------------------------------------------------ - - - virtual void sendDeviceSettings(uint8_t kindOfPrinter, uint8_t kindOfCoinChecker, - uint8_t kindOfMifareReader, uint8_t suppressSleep, - uint8_t kindOfModem, uint8_t kindOfCredit ) const =0; - // enable hardware in device controller: - // kindOfPrinter: 0:off 1: GPT4672 (only this one implemented) - // kindOfCoinChecker: 0:off 1:EMP820 2:EMP900 3: C²_changer - // kindOfMifareReader: 0:off 1: SL025 (only this one implemented) - // suppressSleep: 0:sleep allowed 1: sleep surpressed for special reason - // kindOfModem: 0:off 1: ATB_Sunlink_LTE (not yet implemented) - // kindOfCredit: 0:off 1: cVendTopp 2:cVendPin (not yet implemented) - - virtual void request_ReadbackDeviceSettings() const =0; - - virtual void readback_DeviceSettings(uint8_t *length, uint8_t *data) const =0; - // refer to DC2 manual for exact content - // state 5.5.21: byte[0]=kindOfPrinter byte[1]=kindOfCoinChecker - // byte[2]=kindOfMifarereadr byte[3]=suppress sleep mode - // byte[4]=kindOfModem byte[5]=kind of cc terminal - - virtual void sendMachineID(uint16_t customerNr, uint16_t machineNr, - uint16_t borough, uint16_t zone, - uint16_t alias, char *location) const =0; - - virtual void request_ReadbackMachineID() const =0; - - virtual void readback_machineIDdata(uint8_t *length, uint8_t *data) const =0; - // state 5.5.21: byte[0,1]=customer number byte[2,3]=machine number - // byte[4,5]=borough byte[6,7]=zone byte[8,9]=alias name - // byte[10...41]=location - - // Locks stops automatically at end switch or by timeout - virtual uint8_t lock_openUpperDoor(void) const =0; - virtual uint8_t lock_closeUpperDoor(void) const =0; - - virtual uint8_t lock_openLowerDoor(void) const =0; - virtual uint8_t lock_closeLowerDoor(void) const =0; - - virtual void shut_openOnce(void) const =0; - // and close automatic after shutter time - - virtual void shut_openForCoin(bool start) const =0; - // open flap if coin is attached - // once process is started it runs until stop command - - virtual void shut_sendOpeningTime(uint16_t timeIn_ms ) const =0; - // after this time without retrigger the flap is closed - - virtual void esc_takeMoney(void) const =0; - // and close automatically after escrow time (1s) - - virtual void esc_returnMoney(void) const =0; - // and close automatically after escrow time (1s) - - -// ---------------------------------------------------------------------------------------------------------- -// --------------------------------------------- MIFARE ----------------------------------------------------- -// ---------------------------------------------------------------------------------------------------------- - - - virtual uint8_t mif_returnReaderStateAndCardType(uint8_t *buf, uint8_t maxBufferSize) const =0; - // retval 0=OK 1=error host buffer too small - /* data description, new fast version: - byte 0= still the same: current read state: - 0=power off 1=reader-fault 2=ready - 3=just reading 4=read complete - 5=read partial, removed too early - 6=state unknown - - byte 1: reader state 1=ok 0=nok - byte 2: card preent (0,1) - byte 3: card selected (0) - byte 4: card type: 0...5 - byte 5: card allowed (0=no 1=MifareClassic 1k or 4k) - byte 6: CardSize: 1 or 4 (kB) - byte 7: length of UID 4 or 7 (byte) - */ - - virtual bool mif_readerIsOK(void) const =0; - - virtual bool mif_cardAttached(void) const =0; - - virtual uint8_t mif_readResult(void) const =0; - // result: 0: unknown or still in progress - // 1: card read successful - // 2: reading error - - virtual QString mif_cardUID(void) const =0; - - virtual uint8_t mif_getCardDataDec(uint8_t blkNr, uint8_t *buf, uint8_t maxBufferSize) const =0; - - virtual QString mif_getCardDataStr(uint8_t blockNumber) const =0; - // with blockNumber=0...11 - - - - // ---------------------------------------------------------------------------------------------------------- - // --------------------------------------------- PRINTER ---------------------------------------------------- - // ---------------------------------------------------------------------------------------------------------- - - // read printer condition and settings - - virtual uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const =0; - // retval: status byte - // byte 0 = 0: prnter OK, >0: error - // bit0: paper low 1: no paper 2: temperature error - // 3: head open 4: paper jam in cutter - // 6: no response 7: bad response from printer - // and return struct "Tprn_hw_state" - - virtual bool prn_isUpAndReady(void) const =0; - // true: printer is powered, serial is ok, no error, printer is connected and resonding - - virtual void prn_getCurrentFontSetting(struct Tprn_currentSettings *prn_fonts) const =0; - - - // send Commands to printer: - - virtual void prn_sendText(QByteArray *buf) const =0; - // up to 1280 bytes - - virtual void prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3) const =0; - // send three byte through to printer, see printers manual - - virtual void prn_sendPrnEscCmd(uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4) const =0; - // send four byte through to printer, see printers manual - - - virtual void prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density, uint8_t alignment, uint8_t orientation) const =0; - // send 5 byte: byte 0,1: speed 5...250 mm/s - // byte2: density 0....(25)....50 - // byte3: alignment 'l', 'c', 'r' = left, center, right - // byte4: orientation 0, 90, 180 = 0°, 90°, 180° rotation (by now not supported!) - // not batched! don't use twice within 100ms - - virtual void prn_movePaper(uint8_t wayInMm, uint8_t direction) const =0; - //direction: 1=forward 2=backward - // - virtual void prn_setFonts(uint8_t font, uint8_t size, uint8_t width, uint8_t height) const =0; - // font = kind of font 5...11 (0..22) - // size = 6...20, 9..9: too tiny 10: small ...12 = normal size ...20=huge - // width: 0...4 0=1x 1=2x 2=4x (huge!) 3=8x 4=16x (3,4 make no sense) - // heigth: 0...7 = 1x...8x only 0,1,2,(3) make sense - - virtual void prn_setLetters(uint8_t bold, uint8_t invers, uint8_t underlined) const =0; - // bold: 0/1 - // invers: 0/1 - // underlined: 0/1 - - virtual void prn_cut(uint8_t kindof) const =0; - // kindof: 1=full cut 2=partial cut 3=eject (5xLF + full cut) - - virtual void prn_newLine(uint8_t nrOfLines) const =0; - - virtual void prn_printCompleteFontTable(void) const =0; - - - virtual void prn_printBarcode(uint8_t kindOf, uint8_t withText, uint8_t offset, uint8_t rotation, uint8_t dataLeng, uint8_t *data) const =0; - // kind of barcode: 0=Code39 1=Code128 2=EAN13 3= 2/5interleaved 4=UPC-A 5=EAN8 - // withText: print readable text below - // offset: move by pixel from left border - // rotation - // dataLeng in byte - - virtual void prn_sendQRdata(QByteArray *buf) const =0; - // maximal 150 alphanummeric bytes - - virtual void prn_printQRcode(void) const =0; - // QRcode may have 1...150 alphanummeric data, must be transfered in advance - - - virtual void prn_printLogo(uint8_t nrOfLogo, uint8_t offset ) const =0; - // nrOfLogo: 1..4 in flash 5...8 in Ram - // offset: in mm form left border - - - // ......................................................... - // Parking Ticket (print-out document) designer TD - obsolete - // ......................................................... - - - - // ---------------------------------------------------------------------------------------------------------- - // --------------------------------------------- MDB Bus ---------------------------------------------------- - // ---------------------------------------------------------------------------------------------------------- - - virtual void mdb_sendBusReset(void) const =0; - - virtual void mdb_sendCommand(uint8_t toMdbDevice, uint8_t mdbCommand) const =0; - // send one bus command directly over mdb bus, refer to mdb manual for commands - // this command is not needed in normal operation, just for new or special things - - virtual void mdb_sendMessage(uint8_t toMdbDevice, uint8_t mdbCommand, uint8_t nrOfData, uint8_t *dataBuffer) const =0; - // nrOfData = sizeOf(dataBuffer) maximal 34 byte according mdb specs - // same as mdb_sendCommand, just with data - - virtual bool mdb_busIsReadyToWork() const =0; - - virtual bool mdb_deviceVoltageOK() const =0; - - virtual bool mdb_busVoltageOk() const =0; - - virtual uint8_t mdb_getLastDeviceResponse(uint8_t *fromDevice, uint8_t *lastRequest, - uint8_t *responseLength, uint8_t *responseBuffer) const =0; - // fromDevice: device nr from which data was requested 0,1,2,3 - // lastRequest: sent mdb command - // responseLength: nr of payload data (after mdb-ack) 0...34 - // responseBuffer holds payload data (answer from mdb device) - // return val: mdb result of this request: 1=got ACK 2=got 3xNAK 3=no or bad response 4:got Data (after ACK) - - - // ---------------------------------------------------------------------------------------------------------- - // ---------------------------------- Electronic Coin Validator EMP ----------------------------------------- - // ---------------------------------------------------------------------------------------------------------- - - - virtual void emp_sendSettings(uint16_t coinAcceptance, uint8_t tokenChannel, uint16_t *coinDenomination ) const =0; - // coinAcceptance: bit0=coin1 (lowest donomination) bit15=coin16 bitH=accept bit L = deny coin (no validation) - // tokenChannel 0...31: if this signal comes from emp then a token was inserted - // coinDenomination = array of 16 coin values (e.g. 5, 10, 20...) - - virtual void emp_pollingOnOff(uint8_t on) const =0; - - virtual void emp_startCoinAcceptance(void) const =0; - - virtual void emp_stopCoinAcceptance(void) const =0; - - virtual void emp_getAllParameters(struct T_emp *emp) const =0; - // see struct in hwapi.h - // usage example: - // hwapi *HWaccess const override; - // HWaccess = new hwapi() const override; - // struct T_emp myEmp const override; - // HWaccess->emp_getAllParameters(&myEmp) const override; - // readval=myEmp.pollingRunning const override; - - virtual uint8_t emp_chkIfCoinInserted(void) const =0; - // retval: 0...16 coins left in FIFO - - virtual void emp_getNewCoinRecord(uint8_t *valid, uint8_t *signal, uint8_t *error, uint16_t *value) const =0; - // with every call ONE coin is taken out of FIFO and pointer decremented - // valid: should be 1 - // signal: comes right from coin checker, 0...15 (0=first programmed coin type) 0xFF=no signal - // error: was reported from EMP as dynamic signal right after coin insertion (instead of - // coin signal), example: 3=unknown coin 4=coin is blocked by host. 0xFF=no error - // value: of the coin. Depends on parameter "coinDenomination" in function "emp_sendSettings" - // if coinDenomination[coin 0..15] = 0 then the value programmed in coin checker is taken - // if coinDenomination > 0 then this value is taken. - // Useful in case of two currencies (adapt to local currency) or for token. - - // function gives more details as "emp getLastCoin()" but "emp getLastCoin()" is easier to use - - // alternativ to emp_getNewCoinRecord( ): - virtual uint8_t emp_giveLastCoin(uint16_t *value, uint8_t *signal) const =0; - // retval: 0: NO coin stored 1: valid coin 2: got wrong coin or coin denied - // value: if retval1: value of the coin if reval=2: error number - // 0xFF means NO error or NO signal (as 0 is a valid error/signal) - // signal: channel nr reported from checker 0...15 - - - virtual uint8_t emp_returnLastCoin(uint16_t *value, uint8_t *signal) const =0; - // use for changer - - -#ifdef THIS_IS_CA_MASTER - virtual QString dc_getTxt4RsDiagWin(void) const =0; - virtual void dc_clrTxt4RsDiagWin(void) const =0; - virtual QString dc_get2ndTxt4RsDiagWin(void) const =0; - virtual void dc_clr2ndTxt4RsDiagWin(void) const =0; - virtual QString dc_getTxt4HsStateLine(void) const =0; - virtual void dc_clrTxt4HsStateLine(void) const =0; - virtual QString dc_getTxt4masterStateLine(void) const =0; - virtual void dc_clrTxt4masterStateLine(void) const =0; - virtual QString dc_getTxt4resultStateLine(void) const =0; - virtual void dc_clrTxt4resultStateLine(void) const =0; - virtual QString dc_getdataStateLine(void) const =0; - virtual void dc_clrTxt4dataStateLine(void) const =0; - virtual QString dc_getdatifLine(void) const =0; - virtual void dc_clrTxt4datifLine(void) const =0; -#endif - - - -// ---------------------------------------------------------------------------------------------------------- -// -------- DC Bootloader 1.Version -// ---------------------------------------------------------------------------------------------------------- - - // using DC2 Bootloader - virtual void bl_iniChain(void) const =0; - virtual bool bl_importBinFile(QByteArray readBinFile, uint32_t fileSize, char withDispl) const =0; - virtual uint8_t bl_activatBootloader(uint8_t *sendData) const =0; - virtual uint8_t bl_startChain(void) const =0; - virtual uint8_t bl_readBLversion(uint8_t *sendData) const =0; - // minimum size of sendData-buffer: 5byte retval: length - virtual uint8_t bl_readFWversion(uint8_t *sendData) const =0; - // minimum size of sendData-buffer: 5byte retval: length - - virtual uint8_t bl_prepareDC_BLcmd(uint8_t Cmd, uint8_t SendDataLength, uint8_t *sendData, uint8_t *outBuf) const =0; - // make BL protocol, retval = outbuf length (5...133) - // bring data in correct form: start always with 0x02 finish with 0x03 and append checksum - // 0x02 Cmd < ...sendData ..> CRC CRC 0x03 - // Data length = 0...64 - // special conversion: if data contain 2 or 3 (STX, ETX) then write two bytes: 0x1B (=ESC) and data|0x80 - // so maxlength = 5 + 2 x 64 (if all data are 2 or 3) without 2,3: maxlength = 5 + 64 - - virtual uint8_t bl_exitBL(uint8_t *sendData) const =0; - // minimum size of sendData-buffer: 5byte retval: length - - virtual void led_switchLedIllumination(uint8_t on) const =0; - - - - -// ------------------------------------------------------------------------------------ -// 27.3.2023: Use Device-Controller's Bootloader to send hex-file -// ------------------------------------------------------------------------------------ - - virtual void bl_rebootDC(void) const =0; - - virtual void bl_startBL(void) const =0; - virtual void bl_checkBL(void) const =0; - virtual bool bl_isUp(void) const =0; - // return true is bl is up and running - // also initializes "sendFile" - - virtual void bl_sendAddress(uint16_t blockNumber) const =0; - // send start address, nr of 64byte-block, start with 0 - // will be sent only for folling block-numbers: - // 0, 1024, 2048, 3072 and 4096, so basically every 64kByte - - virtual uint8_t bl_wasSendingAddOK(void) const =0; - // return val: 0: no response by now 1:error 10: OK - - virtual void bl_openBinary(void) const =0; - - virtual void bl_sendDataBlock(uint8_t length, uint8_t *buffer) const =0; - // send 64 byte from bin file - - virtual void bl_sendLastBlock(void) const =0; - - virtual uint8_t bl_wasSendingDataOK(void) const =0; - // return val: 0: no response by now 1:error 10: OK - - virtual void bl_stopBL(void) const =0; - - -// ------------------------------------------------------------------------------------ -// 6.4.2023: new functions for coin collection and printing -// some new system functions -// ------------------------------------------------------------------------------------ - - - virtual bool rtc_setTimeDateDirect(struct Trtc_DateTime *DateTime) const =0; - // return true if successful. could fail if more the 8 commands are waiting - - virtual bool rtc_getExtendedTime(uint8_t *leng, uint8_t *data) const =0; - - virtual bool rtc_getExtendedTime(struct T_extTime *exTime) const =0; - - virtual bool sys_runCompleteTest(void) const =0; - // warning: lasts 20s in one pace - - virtual bool sys_ready4sending(void) const =0; - // return true if a Json-file can be sent - - virtual bool sys_sendJsonFileToDc(uint8_t kindOfFile, uint8_t nrOfTemplate, uint8_t *content ) const =0; - // kindOfFile: 1=config, 2=device, 3=cash, 4=serial, 5=time, 6=printer - // nrOfTemplate=1...32 if kindOfFile==6 - // content = content of the Json file, max 800byte ascii signs - // file is 0-terminated! - // return false if sending is not possible, wait a second - - virtual bool prn_sendDynamicPrnValues(uint8_t *dynPrnVal ) const =0; - // dynPrnVal = array of 8 Variables with 8 byte each, come as ascii string - // like: char prn_dynPrnVal[8][8]; - // return true if sending, false if cmd-stack is full - - virtual bool prn_printTemplate(uint8_t nrOftemplate) const =0; - // print one of the templates loaded by Json prior - // nr = 1..32 - // return true if sending, false if cmd-stack is full - - virtual void log_getHoldAccountNumbers(uint8_t *nrOfVals, uint16_t *accNr ) const =0; - // returns all acc nrs of the backuped vault records - // use: uint16_t backupedAccNumbers[8] - - virtual bool log_selectVaultRecord(uint16_t accountNr ) const =0; - // return true if sending, false if cmd-stack is full - // and trigger transfer - - virtual bool log_chkIfVaultRecordAvailable(void) const =0; - // return true if completly received - - virtual bool log_getVaultRecord(struct T_vaultRecord *retVR) const =0; - // which was selected by: log_selectVaultRecord() - // to be forwarded to Ismas - - virtual bool prn_printAccountReceipt(void) const =0; - // return true if sending to DC OK, false if cmd-stack is full - - virtual bool prn_printTestTicket(void) const =0; - // return true if sending to DC OK, false if cmd-stack is full - - - - - virtual bool cash_startPayment(uint32_t amount) const =0; - // 17.4.23TS: extended to 32bit - - virtual uint8_t cash_paymentProcessing(void) const =0; - // run this function periodically while coin payment process to generate necessary signals - // return value: - // 0: stopped 1: starting up 2: coin collection - // 3: finished by User (Push button) 4: finished, Max-Value collected - // 5: finished by escrow - // 10,11: error cannot start - // 12: timeout while payment, coins returned - // 13: stopped by unexpected error - - virtual uint32_t getInsertedAmount(void) const =0; - - virtual uint16_t getLastInsertedCoin(void) const =0; - - virtual bool getAllInsertedCoins(uint16_t *types, uint16_t *values) const =0; - // alle bei diesem Verkauf eingeworfenen Münzen sind gespeichert, max 64 - - - virtual bool cash_cancelPayment(void) const =0; - // and return coins - - virtual bool cash_stopPayment(void) const =0; - // and keep coins in escrow - - - // after ticket/goods issue: - virtual bool vend_success(void) const =0; - // conclude payment process, encash all inserted coins to vault. Printing was successful - // if possible return change - - virtual bool vend_failed(void) const =0; - // conclude payment process and return all inserted coins - - - - - - virtual uint8_t mif_getCardType(QString *cardholder) const =0; - // return 1,2,3,4 = upper, lower access card, printer test, coin test - // cardholder: 7byte Name-String - - virtual uint64_t sys_getWakeSource(void) const =0; - // retval: 6 bytes, bit coded, 1=event keeps DC awake - - virtual uint8_t sys_getWakeReason(void) const =0; - // Master was woken by following reason: - // 1: MDB Event - // 2: Coin Event - // ( 3: Master Event) - will not set the wake line - // ( 4: 32s pulse) - will not set the wake line - // 5: Door Event - // ( 6: Diag Event) - will not set the wake line - // 7: 30min-Pulse for HB - - virtual void sys_getDeviceConditions(uint8_t *leng, uint8_t *data) const =0; - - virtual void sys_getDeviceConditions(struct T_moduleCondition *devCond) const =0; - - virtual void sys_getDynMachineConditions(uint8_t *leng, uint8_t *data) const =0; - - virtual void sys_getDynMachineConditions(struct T_dynamicCondition *dynMachCond) const =0; - - - virtual uint32_t cash_getAmountInVault(void) const =0; - - virtual uint16_t cash_getNrCoinsInVault(void) const =0; - - virtual uint8_t prn_getPrintResult() const =0; - - virtual uint8_t prn_getCurrentPrinterState() const =0; - // 0: printer OK - // bit0: near paper end bit1: no paper - // bit2: temperature error bit3: error head open - // bit4: paper jam in cutter - // bit6: no response bit7: serial rec. error - // bit5: printer not ready - - - virtual void sys_sendDeviceParameter(struct T_devices *deviceSettings) const =0; - - virtual void sys_restoreDeviceParameter(struct T_devices *deviceSettings) const =0; - - virtual bool sys_areDCdataValid(void) const =0; - - virtual bool sys_sendingTest(void) const =0; - - virtual void prn_requestCurrentDynData(void) const =0; - - virtual bool prn_getCurrentDynamicPrnValuesFromDC(uint8_t *dynPrnVal ) const =0; - // which was sent with: bool prn_sendDynamicPrnValues(uint8_t *dynPrnVal ) const =0; - - virtual bool prn_dynDataAreEqual(uint8_t *buf) const =0; - - virtual bool prn_printKombiticket(uint8_t nrOfKombi) const =0; - // print four of the templates loaded by Json prior - // nr = 1..8 - - virtual void lock_triggerUpperSolenoid(void) const =0; - - virtual void lock_triggerLowerSolenoid(void) const =0; - - virtual bool doors_supervise(void) const =0; - - virtual bool dc_isAutoRequestOn(void) const =0; - - - - -signals: - virtual void hwapi_templatePrintFinished_OK(void) const=0; - virtual void hwapi_templatePrintFinished_Err(void) const=0; - - virtual void hwapi_coinCollectionJustStarted(void) const=0; - virtual void hwapi_coinCollectionAborted(void) const=0; - - virtual void hwapi_gotNewCoin(void) const=0; - virtual void hwapi_payStopByMax(void) const=0; - virtual void hwapi_payStopByPushbutton(void) const=0; - - virtual void hwapi_payStopByEscrow(void) const=0; - virtual void hwapi_payStopByError(void) const=0; - virtual void hwapi_payStopByTimeout(void) const=0; - virtual void hwapi_payCancelled(void) const=0; - virtual void hwapi_coinProcessJustStopped(void) const=0; - - - // new from 2023.06.12 - virtual void hwapi_doorServiceDoorOpened(void) const=0; - virtual void hwapi_doorVaultDoorOpened(void) const=0; - virtual void hwapi_doorCoinBoxRemoved(void) const=0; - virtual void hwapi_doorCoinBoxInserted(void) const=0; - virtual void hwapi_doorCBinAndAllDoorsClosed(void) const=0; - virtual void hwapi_doorAllDoorsClosed(void) const=0; - - - -}; - - -// History -// 11.10.2021: V1.0 222 functions -// 23.12.2021: V1.1 added block-parameter to function "read mifare data" -// 30.12.2021: V1.2 added function: mif_clearDataBuffer(), mif_isBlockAvailable(uint8_t blkNr) and mif_getAvailableDataBlocks() -// 1.1.2022: V1.3 Mifare extended. ( background: read 16 x 48byte from card to DC, read 12 x 64byte from DC to CA) -// new: read full card with 768bytes from HWapi without block borders -// added: mif_getNrOfAvailableDataBytes mif_getCardData768byteDec(uint8_t *buf, uint16_t bufferSize) -// mif_getCardDataDec(uint16_t fromAddr, uint16_t toAddr, uint8_t *buf, uint16_t bufferSize) -// mif_getCardDataStr(bool useHexFormat, char seperator) - -// 29.03.2023: V3.1 some extensions for PSA1256_ptu5, -// V3.2 Bootloader improvement -// 12.04.2023: V3.3 new features extended: loading and using Json-files, cash-collection, cash-data-logging -// 14.04.2023: V3.4 new features extended: sys_getDynMachineConditions, sys_getDeviceConditions and -// rtc_getExtendedTime return struct in addition. New function to select and get VaultRecord -// -// 19.04.2023: V3.5 new function: sys_getWakeReason(); -// 17.05.2023: V3.6 new function: cash_isCollectionActive(), cash_isPayProcessActive() -// new signals: hwapi_coinCollectionJustStopped, hwapi_coinCollectionJustStarted -// getAllInsertedCoins() fixed, also in datif and storeINdata - -// 15.06.2023 V4.2 bring into same order as hwapi in order to set the THIS_IS_CA_MASTER correct - - -//#define HWINF_iid "Atb.Psa2020.software.HWapi/3.1" -//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.1" -//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.3" -//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.4" -//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.5" -//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.6" -//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.0" -//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.1" -#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/4.2" - - - - -Q_DECLARE_INTERFACE(hwinf, HWINF_iid) - - -#endif - - -