From 91c907ba506fc03e4f9e2a02bca17c312e184462 Mon Sep 17 00:00:00 2001 From: Gerhard Hoffmann Date: Thu, 13 Apr 2023 11:28:18 +0200 Subject: [PATCH] Squashed 'DCPlugin/' changes from c1b9452..82accc4 82accc4 Added file types for JSON as enum git-subtree-dir: DCPlugin git-subtree-split: 82accc4b1a46c29b5d93a897a09fcd208cfb6cc2 --- include/interfaces.h | 3147 +++++++++++++++++++++--------------------- 1 file changed, 1574 insertions(+), 1573 deletions(-) diff --git a/include/interfaces.h b/include/interfaces.h index b5e164e..f555636 100644 --- a/include/interfaces.h +++ b/include/interfaces.h @@ -1,1573 +1,1574 @@ -#ifndef INTERFACE_H -#define INTERFACE_H - -#include - - - -struct T_emp -{ - - // Fixdata from EMP: - uint8_t shaft; // = changer level - uint16_t countryCode; - uint8_t scale; - uint8_t decimals; - uint8_t coinValues[16]; - uint16_t routing; - - // Master specs: - uint8_t gotSetup; // 1: got specifications from master 0: no specs - uint16_t coinAccept; // bit 0 = coin1 bit H=accept - uint8_t tokenChannel; - uint16_t denomination[16]; - - // dynamic: - uint8_t state; // step counter of EMP (electronic coin checker) FSM (finite state machine): - // 0=Emp & Bus power off, 1=powered, poll off 2=polling on - // 3=device responded, requesting status - // 4=waiting for status 5=have status, - // 6: IDLE, have paramters from master, polling running, ready for payment - // Master can stop/start polling and acceptance - // 7: end of transaction, polling on, accept off, reporting coins, (wait for last coin) - // 8: transaction running, polling on, acceptance on, reporting coins, - - uint8_t pollingRunning; - uint8_t paymentRunning; - -}; - -struct Trtc_DateTime -{ - uint8_t rtc_hour; - uint8_t rtc_min; - uint8_t rtc_sec; - uint8_t rtc_dayOfMonth; - uint8_t rtc_month; - uint8_t rtc_year; - uint8_t rtc_dayOfWeek; -}; - -struct Tprn_hw_state -{ - // hardware (IO's) - bool powerRdBk; // prn pwr is on - bool rsSwOk; // serial switch (printer or modem) is set to printer - bool rsDrvOk; // RS232 converter for PTU, Printer and Modem in on - - bool ReadyLine; // HW signal from printer showing ready - bool inIdle; // powered and free from errors - bool paperNearEnd; // paper roll runs out - bool noPaper; - bool ErrorTemp; - bool HeadOpen; - bool cutterJam; - bool noResponse; // printer is not connected, cable broken, wrong baudrate - bool badResponse; -}; - - struct Tprn_currentSettings -{ - uint8_t currFont; - uint8_t currSize; - uint8_t currHeigth; - uint8_t currWidth; - bool nowBold; - bool nowInvers; - bool nowUnderlined; - uint8_t currDensity; - uint8_t currSpeed; - bool nowAligned; -}; - - struct T_dynDat -{ - uint8_t licensePlate[8]; - uint8_t vendingPrice[8]; - uint8_t parkingEnd[8]; - uint8_t currentTime[8]; - uint8_t currentDate[8]; - uint8_t dynDat5[8]; - uint8_t dynDat6[8]; - uint8_t dynDat7[8]; -}; - - -struct T_vaultRecord -{ - - // Kassenbeleg (Abrechnungsdatensatz = Kassenwechsel-Datensatz) - char startbuffer[4]; // Psa> // never move or change this 1st entry - uint16_t AccountingNumber; - uint16_t CUNU; - uint16_t MANU; - uint16_t resint1; - //uint16_t resint2; - - char label1buffer[4]; // tim> - uint8_t year; - uint8_t month; - uint8_t dom; - uint8_t hour; - uint8_t min; - uint8_t sec; - uint8_t DoW; - uint8_t reschar3; - - char label2buffer[4]; // abs> - uint32_t AbsIncome1; - uint32_t AbsReserve; - uint32_t AbsNrOfCuts; - -//16 - char label3buffer[4]; // mw > - - // Verkauf, Tür zu: - uint32_t VKcoinsInserted[16]; // nur für Wechsler, soviel wurde eingeworfen - uint32_t VKcoinsReturned[6]; // nur für Wechsler, Anzahl Münzen pro Typ, soviel wurde zurückgegeben -//88 - - // Service, Tür offen: - uint16_t ServCoinsInserted[16]; // nur für Wechsler, soviel wurde eingeworfen - uint16_t ServCoinsReturned[6]; // nur für Wechsler, Anzahl Münzen pro Typ, soviel wurde zurückgegeben - uint16_t resint3; - uint16_t resint4; - uint16_t currentTubeContent[6]; // nur für Wechsler, aktueller Füllstand - uint16_t resint5; - uint16_t resint6; -// 56 - - char label4buffer[4]; // box> - uint16_t coinsInVault[16]; - uint16_t billsInStacker[8]; -// 48 - - char label5buffer[4]; // val> - // actually constant unless exchange rate is changed - uint16_t coinDenomination[16]; // 5..50000 (z.B. 2? sind in Ungarn 760Ft) - uint16_t billDenom[8]; - uint16_t tubeDenom[6]; - uint16_t exchangeRate; - uint16_t resint9; - -// 64 - - char endofblock[4]; // end> - -// 316 byte Block im Speicher - -}; - -struct T_moduleCondition -{ - // store conditon of all system components, hold in RAM - // 0 means unknown, not yet tested/used - // 1 means OK - // 50..99 = HINT / Notification - // 100..150 = WARNING - // 200..250 = ERROR - - uint8_t structStart; // always first!!! - uint8_t ram; // v - uint8_t intEe; // v - uint8_t extEe; // v - - uint8_t rtc; // 1: time/date OK 100: time not plausible 200: hardware error - uint8_t boardHw; // v - uint8_t printer; // v - uint8_t modem; // v - - uint8_t signal; // 1...99 - uint8_t regist; // 100:not 1:reg 2:ping OK 3:gotTime - uint8_t mdbBus; - uint8_t coinChecker; // EMP, OMP or mei-cashflow - - uint8_t coinEscrow; // v - uint8_t mifareReader; // v - uint8_t creditTerm; // not available - uint8_t coinReject; // v - - uint8_t coinSafe; // v - uint8_t billSafe; // v - uint8_t voltage; // v // 1:11..14V - uint8_t temper; // v - - uint8_t poweronTest; - uint8_t doorState; // 1: alles zu 200: t?r offen + bit1(S) +bit2(CB) + bit3(CB) - uint8_t doorWasOpened; // 1: all doors are closed 200: any door was just opened - uint8_t changer; // can only be tested by usage - - uint8_t coinBlocker; // can only be tested by usage - uint8_t billReader; // can only be tested by usage - uint8_t ResetReason; - uint8_t allModulesChecked; - - uint8_t alarmState; - uint8_t res11; - uint8_t res12; - uint8_t res13; - -}; - -struct T_dynamicCondition -{ - // dynamic conditions, change rapidly and frequently - // these are values for the Heartbeat - - // T?rschalter entprellt: - char upperDoor; // 0:fehlt 1:drin - char middleDoor; - char lowerDoor; - char coinBox; - - char billBox; - char modeAbrech; - char onAlarm; - char nowCardTest; - - char nowPayment; - char lastMifCardType; - char openedAuthorized; - char allDoorsDebounced; - - uint8_t lastSDoorState; - uint8_t lastVDoorState; - uint8_t CBinDebounced; - uint8_t lastCBstate; - - char paymentInProgress; - char res1; - char res2; - char res3; - - uint16_t U_Batt; - uint16_t Temperatur; - - uint16_t cash_storedaccNumbers[8]; // List all stored accounting numbers in ext. eeprom - - uint16_t nrCoinsInBox; - uint16_t resui1; - - uint32_t amountInBox; - uint32_t amountJustPaid; - - uint16_t lastInsCoinType; // wahrscheinlich uchar - uint16_t resui2; - - uint32_t totalTransVolume; - uint32_t totalNrOfVends; - -}; - - -class hwinf -{ - -public: - enum class DownloadResult {OK, ERROR, TIMEOUT, NOP}; - - virtual ~hwinf() {} - - - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // Use serial interface and protocol stack in Cashagent-Library - // Sending Output data to DeviceController DC2b - // Sending input requests to DC2 (single or auto-batch) - // Getting input data as receiver payload - // Furthermore the Cashagent-Library answers with status strings about sending and reading result - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual bool dc_openSerial(int BaudNr, QString BaudStr, QString ComName, uint8_t connect) const = 0; - // Command: open serial interface - // BaudNr: 0:1200 1:9600 2:19200 3:38400 4:57600 5:115200 - // BaudStr: for exapmle "19200" - // ComName: for example "COM48" - // connect: 0, 1 - - virtual bool dc_closeSerial(void) const = 0; - // Command: close serial interface in order to save power while power down - // or if another port must be used - - virtual bool dc_isPortOpen(void) const =0; - // returns true if port open (don't send unless open. Sending to closed port will crash program) - - - - virtual uint8_t test_serialState(void) const =0; - // test on-board signals for the serials - // serial drv on/off, Serial mux1, Serial mux2 - - virtual bool test_serialIsOn(void) const =0; - - virtual bool dc_updateDC(QString binFileName, - QString baudrate, - QString comPort) const = 0; - // download binary file down into device controller - - virtual void dc_autoRequest(bool on) const =0; - // on = true: select that all READ-Requests are sent automatically - // on = false: select that all READ-Requests are sent manually one by one - // Every input information from DC2 must be requested - // ( digital and analog sensors, get time/date, get status information ) - - virtual uint8_t dc_isRequestDone(void) const =0; - // retval: 0: request is still in progress - // 1: answer from DC2 was OK - // 2: wrong answer from DC2 - - virtual uint16_t dc_getCompletePayLoad(uint16_t plBufSiz, uint8_t *payLoad) const =0; - // get data back in "payLoad", max 64 byte, can be used for diagnosis - // retval = nr of bytes received. If host buffer too small then - // only plBufSiz bytes are copied to "payLoad" - // plBufSiz­z=size of host buffer - - virtual void dc_requTestResponse() const =0; - // tell DC2 to send a test-string, useful to see if cable and baudrate is OK - - virtual bool dc_readAnswTestResponse() const =0; - // retval: true: test was successful, got right response - - virtual uint8_t getRawRecLength(void) const =0; - // only needed if protocol stack in Cashagent-Library is bypassed - - virtual uint8_t getRawReceivedData(uint8_t *receivedData) const =0; - // only needed if protocol stack in Cashagent-Library is bypassed - - virtual QString dc_getSerialState(void) const =0; - // get result of opening-command like "ttyS0 opened with 115200 8N1! - // or error messages like "comport not available..." - // was saved by last opening event, can be passed for 100ms - - virtual void dc_clrSerialStateText(void) const =0; - // clear above text to avoid multiple repetive displaying - - - virtual QString dc_getTxt4HsStateLine(void) const =0; - // return string with status of handshakes - - virtual void dc_clrTxt4HsStateLine(void) const =0; - // clear above text to avoid multiple repetive displaying - - - virtual QString dc_getTxt4masterStateLine(void) const =0; - // returns string telling if the received packet is valid and complies protocol - // if OK: "slave response OK" in case of error: "wrong length received", "wrong start sign received", - // "received datalen to big", "wrong data len received", "wrong crc received" - - virtual void dc_clrTxt4masterStateLine(void) const =0; - // clear above text to avoid multiple repetive displaying - - - virtual QString dc_getTxt4resultStateLine(void) const =0; - // returns string telling response of DC. First question: did DC get a correct request telegram? - // and if: 2nd question did DC perform the contained output and input commands - // if OK: "Slave OUT and IN Result: 0 0" - // in case of error: "slave got wrong start sign" ..length" ...crc" ... address" - // slave does not perform and command! - // 2nd) received telegram was OK, DC tried to perform the master commands. result - // result of writing data (e.g switching leds and motors, sending stuff to printer...) - // OUT = 0: OK 1: unknown command 2: operation not possible - // result of reading data (e.g. switches, voltages, accepted coins, printer status....) - // IN = 0: OK 1: unknown command 2: could not read due to hardware error 3: could not read because device is off - - virtual void dc_clrTxt4resultStateLine(void) const =0; - // clear above text to avoid multiple repetive displaying - - - virtual QString dc_getdataStateLine(void) const =0; - // check if recveied input data are ok/valid - // OK-string : "valid INdata...." with protocol details - // not OK: string empty - - virtual void dc_clrTxt4dataStateLine(void) const =0; - // clear above text to avoid multiple repetive displaying - - - virtual QString dc_getdatifLine(void) const =0; - // returns string with result of function dc_requTestResponse() - // "correct" or "false" - - virtual void dc_clrTxt4datifLine(void) const =0; - // clear above text to avoid multiple repetive displaying - - - virtual QString dc_getTxt4RsDiagWin(void) const =0; - // returns string to be displayed in "serial traffic" window - // details about sent and received protocol - - virtual void dc_clrTxt4RsDiagWin(void) const =0; - // clear above text to avoid multiple repetive displaying - - virtual QString dc_get2ndTxt4RsDiagWin(void) const =0; - // returns string to be displayed in "serial traffic" window - // details about sent and received protocol - - virtual void dc_clr2ndTxt4RsDiagWin(void) const =0; - // clear above text to avoid multiple repetive displaying - - -// 28 functions - - - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // DC2b internal data - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - - virtual QString dc_getSerialParams(void) const =0; - // get DC2 serial settings (not very meaningful as they will not come if different from master settings) - - virtual QString dc_getHWversion(void) const =0; - // get DC2 hardware version - - virtual QString dc_getSWversion(void) const =0; - // get DC2 software version - - virtual QString dc_getState(void) const =0; - // get DC2 status (every OK or any error/warning? ) - - - // UID - unique number, different in every DC - virtual void dc_getUID8byte(uint8_t *buf8byteUid) const =0; - // get 8 single bytes in buffer - - virtual QString dc_getUIDstr() const =0; - // get as string - - virtual uint64_t dc_getUIDnumber(void) const =0; - // get UID as one long number - - // Analog values: - virtual uint32_t dc_getTemperature(void) const =0; - // in Sax-Format 0...400 (0=-50,0°C 100=0,0°C 141=20,5°C 400=150,0°C) - - virtual QString dc_getTemperaturStr(void) const =0; - // as string like "-12,5°C" - - virtual uint32_t dc_getVoltage(void) const =0; - // as value in mV, 0...65,535V - - virtual QString dc_getVoltagStr(void) const =0; - // as string in mV - - virtual bool dc_mainFuseIsOk(void) const=0; - // true if 12V fuse is OK - // false: fuse blown, DC will continue working but no 12V device can be used! - - virtual void dc_setWakeFrequency(uint8_t period) const =0; - // RTC wakes DC2 (and PTU) by hardware signal every 32seconds - // change wake signal period to 1...64s - - virtual void dc_OrderToReset(void) const =0; - // want DC2 to reset (in order to start Bootloader) - - - - // all read-requests can be sent manually by the following functions - // or automatically in background by: void hwapi::dc_autoRequest(bool on) - // in other words: - // if automatic-reading is on, then there's no need to send any of these commands, - // but it's allowed to send them in order to speed up the refreshing of the inputs - - virtual void request_DC2serialConfig() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - - virtual void request_DC2_HWversion() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_SWversion() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_condition() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_UID() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - - - virtual void request_DC2_analogues() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_digitalInputs() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - virtual void request_DC2_digitalOutputs() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - -// 22 - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // using DC2 Bootloader - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void bl_sendDataDirectly(uint8_t length, uint8_t *buf) const =0; - // send without protocol frame, needed for the DC bootloader - - virtual void bl_iniChain(void) const =0; - - virtual bool bl_importBinFile(QByteArray readBinFile, uint32_t fileSize, char withDispl) const =0; - - virtual uint8_t bl_activatBootloader(uint8_t *sendData) const =0; - - virtual uint8_t bl_startChain(void) const =0; - - virtual uint8_t bl_readBLversion(uint8_t *sendData) const =0; - // minimum size of sendData-buffer: 5byte retval: length - - virtual uint8_t bl_readFWversion(uint8_t *sendData) const =0; - // minimum size of sendData-buffer: 5byte retval: length - - virtual uint8_t bl_prepareDC_BLcmd(uint8_t Cmd, uint8_t SendDataLength, uint8_t *sendData, uint8_t *outBuf) const =0; - // make BL protocol, retval = outbuf length (5...133) - // bring data in correct form: start always with 0x02 finish with 0x03 and append checksum - // 0x02 Cmd < ...sendData ..> CRC CRC 0x03 - // Data length = 0...64 - // special conversion: if data contain 2 or 3 (STX, ETX) then write two bytes: 0x1B (=ESC) and data|0x80 - // so maxlength = 5 + 2 x 64 (if all data are 2 or 3) without 2,3: maxlength = 5 + 64 - - virtual uint8_t bl_exitBL(uint8_t *sendData) const =0; - // minimum size of sendData-buffer: 5byte retval: length - - - - -// 9 - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // get Time and Date from DC2b (contains a buffered real time clock) valid for about three days without power - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual uint8_t rtc_getDateTime(struct Trtc_DateTime *rtc_DateTime) const =0; - - virtual uint8_t rtc_setDateTime(void) const =0; - // synch DC2 with PC or PTU system time and date - - virtual void rtc_getTime(uint8_t *hh, uint8_t *mm, uint8_t *ss) const =0; - // get time directly - - virtual void rtc_getDate(uint8_t *yy, uint8_t *mm, uint8_t *dd) const =0; - // get date directly - - virtual uint8_t rtc_getToday(uint8_t *dow, uint16_t *minOfToday, uint32_t *secOfToday) const =0; - // dow=day of week, 1=monday...7 - // minOfToday: 0=midnight...1439= 23:59 - // secOfToday: 0=midnight...86399= 23:59:59 - - virtual bool rtc_isLeapYear(uint8_t *lastLeapYear, uint8_t *NextLeapYear) const =0; - // retval true: this year is leap year - - virtual bool rtc_isLeapYear() const =0; - - virtual void rtc_getWeek(uint8_t *DayOfWeek, uint8_t *HoursOfWeek, uint16_t *MinutesOfWeek) const =0; - // DayOfWeek: 1=monday...7 - // HoursOfWeek: 0=Monday 0:00 o'clock...167=Sunday 23:00 - // MinutesOfWeek: 0=Monday 0:00 o'clock...10079=Sunday 23:59 - - virtual void rtc_getMonth(uint8_t *DayOfMonth, uint16_t *HoursOfMonth, uint16_t *MinutesOfMonth) const =0; - // DayOfMonth: 1...31 - // HoursOfMonth: 0 = 0:00o'clock of 1.day in month up to 743 - // MinutesOfMonth:0 = 0:00o'clock of 1.day in month up to 44639 - - virtual void rtc_getYear(uint16_t *DayOfYear, uint16_t *HoursOfYear, uint32_t *MinutesOfYear) const =0; - // DayOfYear: 1...366 1= 1.Jan of this current year - // HoursOfYear: 0=1.Jan 0:00o'clock ...8783=31.12 23 o'clock - // MinutesOfYear: 0=1.Jan 0:00o'clock ...527039=31.12 23:59 o'clock - - virtual QString rtc_getTimStr(void) const =0; - virtual QString rtc_getDatStr(void) const =0; - virtual QString rtc_getTimDatStr(void) const =0; - - - - - virtual void request_DC2_TimeAndDate() const =0; - // read-request can be sent manually by this function, not needed if auto-request is on - - - -// 14 - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // PTU, Master - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void ptu_switchWake(bool WAKEACTIVE) const =0; - - virtual bool ptu_WakeINisActive(void) const =0; - - virtual bool ptu_WakeOutIsOn(void) const =0; - - virtual void sendDeviceSettings(uint8_t kindOfPrinter, uint8_t kindOfCoinChecker, - uint8_t kindOfMifareReader, uint8_t suppressSleep, - uint8_t kindOfModem, uint8_t kindOfCredit ) const =0; - // enable hardware in device controller: - // kindOfPrinter: 0:off 1: GPT4672 (only this one implemented) - // kindOfCoinChecker: 0:off 1:EMP820 2:EMP900 3: C²_changer - // kindOfMifareReader: 0:off 1: SL025 (only this one implemented) - // suppressSleep: 0:sleep allowed 1: sleep surpressed for special reason - // kindOfModem: 0:off 1: ATB_Sunlink_LTE (not yet implemented) - // kindOfCredit: 0:off 1: cVendTopp 2:cVendPin (not yet implemented) - - - virtual void request_ReadbackDeviceSettings() const =0; - - virtual void readback_DeviceSettings(uint8_t *length, uint8_t *data) const =0; -/* - buf66[0]=devPara.kindOfPrinter; - buf66[1]=devPara.kindOfCoinChecker; - buf66[2]=devPara.kindOfMifareReader; - buf66[3]=devPara.suppressSleepMode; - buf66[4]=devPara.kindOfModem; - buf66[5]=devPara.kindOfCreditcard; - buf66[6]=devPara.CoinEscrow; - buf66[7]=devPara.CoinRejectUnit; - buf66[8]=devPara.CoinShutter; - buf66[9]=devPara.BillAcceptor; - buf66[10]=devPara.usevaultLock; - buf66[11]=devPara.autoAlarm; - buf66[12]=devPara.autoOpen; - buf66[13]=devPara.printAccReceipt; - buf66[14]=devPara.printDoorReceipt; - buf66[15]=devPara.printTokenTicket; - uitmp=devPara.VaultFullWarnLevel; - buf66[16]=swl_getOneByteFromUint(uitmp, GETLOWBYT); - buf66[17]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); - uitmp=devPara.VaultFullErrorLevel; - buf66[18]=swl_getOneByteFromUint(uitmp, GETLOWBYT); - buf66[19]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); - -*/ - - virtual void sendMachineID(uint16_t customerNr, uint16_t machineNr, - uint16_t borough, uint16_t zone, - uint16_t alias, char *location) const =0; - - virtual void request_ReadbackMachineID() const =0; - - virtual void readback_machineIDdata(uint8_t *length, uint8_t *data) const =0; - // state 5.5.21: byte[0,1]=customer number byte[2,3]=machine number - // byte[4,5]=borough byte[6,7]=zone byte[8,9]=alias name - // byte[10...41]=location - // 12.4.23TS still the same - - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // Printer - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - - - virtual void prn_switchPower(bool on) const =0; - - virtual bool prn_isPrinterPowerOn(void) const =0; - - virtual uint8_t prn_PrnFuseIsOk(void) const=0; - //retval: 0: fuse blown 1: fuse OK 2:unknown as printer power is off - - virtual bool prn_readyINisActive(void) const =0; - - virtual uint8_t cash_getLowPaperSensor(void) const=0; - // 0: Sensor sees paper 1: no paper 99: off - - // the following device state requests are deployed only if device is powered up: - virtual void request_PrinterHwState() const =0; - virtual void request_PrinterCurrentFonts() const =0; - virtual void request_PrinterStateComplete() const =0; - - virtual bool test_serialMux1isSetToPrinter(void) const =0; - - // read printer condition and settings - - virtual uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const =0; - // retval: status byte - // byte 0 = 0: prnter OK, >0: error - // bit0: paper low 1: no paper 2: temperature error - // 3: head open 4: paper jam in cutter - // 6: no response 7: bad response from printer - // and return struct "Tprn_hw_state" - - virtual bool prn_isUpAndReady(void) const =0; - // true: printer is powered, serial is ok, no error, printer is connected and resonding - - virtual void prn_getCurrentFontSetting(struct Tprn_currentSettings *prn_fonts) const =0; - - - // send Commands to printer: - - virtual void prn_sendText(QByteArray *buf) const =0; - // up to 1280 bytes - - virtual void prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3) const =0; - // send three byte through to printer, see printers manual - - virtual void prn_sendPrnEscCmd(uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4) const =0; - // send four byte through to printer, see printers manual - - - virtual void prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density, uint8_t alignment, uint8_t orientation) const =0; - // send 5 byte: byte 0,1: speed 5...250 mm/s - // byte2: density 0....(25)....50 - // byte3: alignment 'l', 'c', 'r' = left, center, right - // byte4: orientation 0, 90, 180 = 0°, 90°, 180° rotation (by now not supported!) - // not batched! don't use twice within 100ms - - virtual void prn_movePaper(uint8_t wayInMm, uint8_t direction) const =0; - //direction: 1=forward 2=backward - // - virtual void prn_setFonts(uint8_t font, uint8_t size, uint8_t width, uint8_t height) const =0; - // font = kind of font 5...11 (0..22) - // size = 6...20, 9..9: too tiny 10: small ...12 = normal size ...20=huge - // width: 0...4 0=1x 1=2x 2=4x (huge!) 3=8x 4=16x (3,4 make no sense) - // heigth: 0...7 = 1x...8x only 0,1,2,(3) make sense - - virtual void prn_setLetters(uint8_t bold, uint8_t invers, uint8_t underlined) const =0; - // bold: 0/1 - // invers: 0/1 - // underlined: 0/1 - - virtual void prn_cut(uint8_t kindof) const =0; - // kindof: 1=full cut 2=partial cut 3=eject (5xLF + full cut) - - virtual void prn_newLine(uint8_t nrOfLines) const =0; - - virtual void prn_printCompleteFontTable(void) const =0; - - virtual void prn_printBarcode(uint8_t kindOf, uint8_t withText, uint8_t offset, uint8_t rotation, uint8_t dataLeng, uint8_t *data) const =0; - // kind of barcode: 0=Code39 1=Code128 2=EAN13 3= 2/5interleaved 4=UPC-A 5=EAN8 - // withText: print readable text below - // offset: move by pixel from left border - // rotation - // dataLeng in byte - - virtual void prn_sendQRdata(QByteArray *buf) const =0; - // maximal 150 alphanummeric bytes - - virtual void prn_printQRcode(void) const =0; - // QRcode may have 1...150 alphanummeric data, must be transfered in advance - - - virtual void prn_printLogo(uint8_t nrOfLogo, uint8_t offset ) const =0; - // nrOfLogo: 1..4 in flash 5...8 in Ram - // offset: in mm form left border - - - - // ......................................................... - // Parking Ticket (print-out document) designer TD - // ......................................................... - - // Predefine document Layout (e.g. parking ticket) in advance and stroe it for quick and easy use - // in opposite to the above "single" commands you need only one or a few commands at vending time. - // Stored text is just send to printer once the printing command is issued - // stored commands within the text are interpreted and executed right at the place (in ticket) they are - // example: start bold, , stop bold - // Predefinition of up to 16 ticket Layouts is possible, 0...1280 byte each - // Number 0..15, al keept non-volatile - // up to 8 dynamic values can be defined in the template ("print val3 here") and will be sent with printing command - // example: print current time at this point (the time of printing not the storage time!!) - - virtual void pri_startTicketDesign(void) const =0; - // start for every new printer document, reseting collecting buffer - - // all further functions write/append text, numbers and command to the ticket-buffer, up to 1278 bytes allowed - // return val of the appending functions: true=ok false=too long, buffer full - - virtual int pri_TD_getCurrentSize(void) const =0; - // retval: 0...1278 - - virtual bool pri_TD_addText(QByteArray text) const =0; - // example: pri_TD_addText("Hello") const =0; - // example: pri_TD_addText(tempStr) const =0; - // retval: true=ok false=too long, buffer full - - virtual bool pri_TD_addValue(int val) const =0; - // +/- 0...2^(31) - - virtual bool pri_TD_addNewLine(void) const =0; - - virtual bool pri_TD_addSign(char sign) const =0; - // example: '.' ' ' 0x20 'W' '$' - - virtual bool pri_TD_addCommand(char group, char attribute, char p1, char p2, char p3, char p4, char p5) const =0; - // always add 8 byte to the ticket layout: ESC & group & attribute & parameter1...5 - /* complete list of possible commands: - group 50 : paper - attribute 10 : move forward - p1: wayInMm p2: direction - attribute 11 : cut - p1: kind of, 1=full 2=partial, 3=eject - attribute 12 : new line(s) - p1: nr of lines 1...100 - - group 51 : fonts - attribute 10 : kind of font see description above - p1: 0...8 - attribute 11 : font size - p1: 6...20 - attribute 12 : font width - p1: 0...4 - attribute 13 : font heigth - p1: 0...7 - attribute 14 : switch bold print on/off - p1: 0=off 1=on - attribute 15 : switch invers print on/off - p1: 0=off 1=on - attribute 16 : switch underlined print on/off - p1: 0=off 1=on - - group 52 : print graphics - attribute 10 : print barcode with dynamic data 6 and 7 - p1...p5 = kindOf, withText, offset, rotation, dataLeng, see description above - attribute 11 : print QRcode with preset data - - attribute 12 : print Logo - p1=nrOfLogo, p2=offset - - group 53 : print dynamics - attribute 10 : - p1: 1...8 = print dynData 0..7 at this place - - */ - - virtual char prn_clearDocument(uint8_t documentNumber) const =0; - // clear memory buffer for ONE document - // function takes a second! don't send right before "store doc" - - virtual bool prn_store_Document(uint8_t documentNumber ) const =0; - // send the predefined Layout (generated with above TD functions) to DeviceController to save - // documentNumber=0...15 - // maximal 1280 bytes each - // allowed: 0x20...0xFF, 0x0A, 0x0C, 0x1B (LF, CR, Esc) - // 0x1B=start of embedded command (next 7bytes = command) - - // with a print command a set of 8 dynamic strings can be sent - // the place in the ticket layout is predefined (already in DC memory) - // the dynamics are first calculated at printing time - - virtual bool prn_printDocument(uint8_t documentNumber, struct T_dynDat *dynTicketData) const =0; - - -// 36 - - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // Mifare Card Reader - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void mif_readerOn(bool on) const =0; - - virtual bool mif_cardIsAttached(void) const =0; - virtual bool mif_isMifarePowerOn(void) const =0; - - virtual void request_MifareReaderState() const =0; - virtual void request_MifareCardType() const =0; - virtual void request_MifareAtbType() const =0; - virtual void request_MifareID() const =0; - virtual void request_MifareData(uint8_t dataBlockNumber) const =0; - //virtual void request_MifareData() const =0; - - // dataBlockNumber must be 0....11, returns 64byte of data - - - virtual bool test_serialMux2isSetToMifare(void) const =0; - - virtual void mif_creatAtbCard(uint8_t cardType) const =0; - - /* data description: - byte 0: current read state: 0=power off 1=reader-fault 2=ready - 3=just reading 4=read complete - 5=read partial, removed too early - 6=state unknown - byte 1,2: read data length from card - 3: 1=reader is OK (reported serial nr is OK) 0=wrong or no reader - 4...15: reader version, expected "ATB25-1.8" - byte16: 1=card is present 0:not - 17: 0 - 18: card type reported from reader - 19: 1=allowed card type 0=not - 20: card size: 1 or 4 (dec) = card size - 21: LengthOfUID: 4 or 7 (dec) (byte) - 22: UID 8 byte in hex - byte 30: sector logged: 0 - byte 31: current sector: 0 - byte 32: result, always 0 - */ - virtual uint8_t mif_returnReaderStateAndCardType(uint8_t *buf, uint8_t maxBufferSize) const =0; - // retval 0=OK 1=error host buffer too small - - virtual bool mif_readerIsOK(void) const =0; - - virtual bool mif_cardAttached(void) const =0; - - virtual uint8_t mif_readResult(void) const =0; - // result: 0: unknown or still in progress - // 1: card read successful - // 2: reading error - - //virtual void mif_clearDataBuffer(void) const =0; - - virtual QString mif_cardUID(void) const =0; - // returns string with 8 byte - - //virtual bool mif_isBlockAvailable(uint8_t blkNr) const =0; - //blkNr=0...11 - - //virtual uint32_t mif_getAvailableDataBlocks(void) const =0; - // bit0=1 if block 0 = valid ...up to ... bit 11=1 if block 11=read - - virtual uint8_t mif_getCardDataDec(uint8_t blkNr, uint8_t *buf, uint8_t maxBufferSize) const =0; - - virtual QString mif_getCardDataStr(uint8_t blockNumber) const =0; - // with blockNumber=0...11 - - // read mifare data independant from blocks - //virtual uint16_t mif_getNrOfAvailableDataBytes(void) const =0; - - //virtual bool mif_getCardData768byteDec(uint8_t *buf, uint16_t bufferSize) const =0; - - //virtual bool mif_getCardDataDec(uint16_t fromAddr, uint16_t toAddr, uint8_t *buf, uint16_t bufferSize) const =0; - - //virtual QString mif_getCardDataStr(bool useHexFormat, char seperator) const =0; - -// 16 - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // Credit Card Terminal - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void credit_switchPower(bool on) const =0; - // the same as modem power - - virtual bool cred_isCreditPowerOn(void) const =0; - - virtual bool test_serialMux2isSetToCredit(void) const =0; - - virtual void credit_switchWake(bool WAKEACTIVE) const =0; - -// 4 - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // Modem - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void mod_switchPower(bool on) const=0; - - virtual bool mod_isGsmPowerOn(void) const =0; - - virtual bool test_serialMux1isSetToModem(void) const =0; - - virtual void mod_switchWake(bool WAKEACTIVE) const=0; - -// 2 - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // MDB Bus - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void mdb_switchPower(bool on) const =0; - virtual void mdb_switchWake(bool WAKEACTIVE) const =0; - - virtual bool mdb_WakeINisActive(void) const =0; - virtual bool mdb_testIsmdbTxDon(void) const =0; - virtual bool mdb_isMdbPowerOn(void) const =0; - - virtual void request_MDB_Status() const =0; - virtual void request_MDB_lastResponse() const =0; - - virtual bool test_getDO_mdbRXtst(void) const =0; - // readback digital outputs of connected devices - // these functions are not needed for normal operation - // but can be used to test and verify conditions - - virtual void mdb_sendBusReset(void) const =0; - - virtual void mdb_sendCommand(uint8_t toMdbDevice, uint8_t mdbCommand) const =0; - // send one bus command directly over mdb bus, refer to mdb manual for commands - // this command is not needed in normal operation, just for new or special things - - virtual void mdb_sendMessage(uint8_t toMdbDevice, uint8_t mdbCommand, uint8_t nrOfData, uint8_t *dataBuffer) const =0; - // nrOfData = sizeOf(dataBuffer) maximal 34 byte according mdb specs - // same as mdb_sendCommand, just with data - - virtual bool mdb_busIsReadyToWork() const =0; - - virtual bool mdb_deviceVoltageOK() const =0; - - virtual bool mdb_busVoltageOk() const =0; - - virtual uint8_t mdb_getLastDeviceResponse(uint8_t *fromDevice, uint8_t *lastRequest, - uint8_t *responseLength, uint8_t *responseBuffer) const =0; - // fromDevice: device nr from which data was requested 0,1,2,3 - // lastRequest: sent mdb command - // responseLength: nr of payload data (after mdb-ack) 0...34 - // responseBuffer holds payload data (answer from mdb device) - // return val: mdb result of this request: 1=got ACK 2=got 3xNAK 3=no or bad response 4:got Data (after ACK) - - -// 15 - - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // Coin Changer, Checker (EMP) - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void request_EMP_allParameters() const =0; - - virtual void request_EMP_lastCoin() const =0; - - virtual uint8_t emp_returnLastCoin(uint16_t *value, uint8_t *signal) const =0; - // use for changer - - - // ---------------------------------- Electronic Coin Validator EMP ----------------------------------------- - - virtual void emp_sendSettings(uint16_t coinAcceptance, uint8_t tokenChannel, uint16_t *coinDenomination ) const =0; - // coinAcceptance: bit0=coin1 (lowest donomination) bit15=coin16 bitH=accept bit L = deny coin (no validation) - // tokenChannel 0...31: if this signal comes from emp then a token was inserted - // coinDenomination = array of 16 coin values (e.g. 5, 10, 20...) - - virtual void emp_pollingOnOff(uint8_t on) const =0; - - virtual void emp_startCoinAcceptance(void) const =0; - - virtual void emp_stopCoinAcceptance(void) const =0; - - virtual void emp_getAllParameters(struct T_emp *emp) const =0; - // see struct in hwapi.h - // usage example: - // hwapi *HWaccess const =0; - // HWaccess = new hwapi() const =0; - // struct T_emp myEmp const =0; - // HWaccess->emp_getAllParameters(&myEmp) const =0; - // readval=myEmp.pollingRunning const =0; - - virtual uint8_t emp_chkIfCoinInserted(void) const =0; - // retval: 0...16 coins left in FIFO - - virtual void emp_getNewCoinRecord(uint8_t *valid, uint8_t *signal, uint8_t *error, uint16_t *value) const =0; - // with every call ONE coin is taken out of FIFO and pointer decremented - // valid: should be 1 - // signal: comes right from coin checker, 0...15 (0=first programmed coin type) 0xFF=no signal - // error: was reported from EMP as dynamic signal right after coin insertion (instead of - // coin signal), example: 3=unknown coin 4=coin is blocked by host. 0xFF=no error - // value: of the coin. Depends on parameter "coinDenomination" in function "emp_sendSettings" - // if coinDenomination[coin 0..15] = 0 then the value programmed in coin checker is taken - // if coinDenomination > 0 then this value is taken. - // Useful in case of two currencies (adapt to local currency) or for token. - - // function gives more details as "emp getLastCoin()" but "emp getLastCoin()" is easier to use - - // alternativ to emp_getNewCoinRecord( ): - virtual uint8_t emp_giveLastCoin(uint16_t *value, uint8_t *signal) const =0; - // retval: 0: NO coin stored 1: valid coin 2: got wrong coin or coin denied - // value: if retval1: value of the coin if reval=2: error number - // 0xFF means NO error or NO signal (as 0 is a valid error/signal) - // signal: channel nr reported from checker 0...15 - -// 11 - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // Coin blocker, Coin Escrow, Coin reject - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void shut_move(bool open) const =0; - virtual void esc_moveFlaps(uint8_t flap ) const =0; - // 0: close both 1: open take-flap 2: open return - - virtual void coin_switchRejectMotor(uint8_t dir) const =0; - virtual bool coid_isAttached(void) const =0; - virtual bool coin_escrowIsOpen(void) const =0; - virtual bool cash_getRejectMotorHomePos(void) const=0; - - - virtual bool coin_shutterIsOpen(void) const =0; - virtual bool coin_shutterTestOutput(void) const =0; - - virtual uint8_t coin_escrowFlapOpened(void) const =0; - // retval: 1:return flap is open 2:take flap is open 0:closed - - virtual void shut_openOnce(void) const =0; - // and close automatic after shutter time - - virtual void shut_openForCoin(bool start) const =0; - // open flap if coin is attached - // once process is started it runs until stop command - - virtual void shut_sendOpeningTime(uint16_t timeIn_ms ) const =0; - // after this time without retrigger the flap is closed - - virtual void esc_takeMoney(void) const =0; - // and close automatically after escrow time (1s) - - virtual void esc_returnMoney(void) const =0; - // and close automatically after escrow time (1s) - - virtual void coin_rejectCoins(void) const =0; - -// 15 - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // MDB Bill evaluator - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - - - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // doors, locks, cashboxes - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void lock_switchContactPower(bool on) const =0; - - virtual bool door_isContactPowerOn(void) const =0; - - virtual uint8_t door_getLocks(void) const =0; - // retval bit0: upper lever is up (=open) - // bit1: upper lever is down (=locked) - // bit2: lower lever is up - // bit3: lower lever is down (=locked) - - virtual bool door_upperDoorIsLocked(void) const =0; - - virtual bool door_upperDoorIsUnlocked(void) const =0; - - virtual uint8_t lock_switchUpperLock(uint8_t dir) const =0; - // dir 0=off 1=up 2=down - // move lock until stop cmd (0) - - virtual uint8_t lock_openUpperDoor(void) const =0; - // Locks stops automatically at end switch or by timeout - - virtual uint8_t lock_closeUpperDoor(void) const =0; - // Locks stops automatically at end switch or by timeout - - virtual uint8_t door_getSwitches(void) const =0; - // retval: bit0: upper door 1: low door 2:vault door - - virtual bool door_isUpperDoorOpen(void) const =0; - - - virtual bool door_lowerDoorIsLocked(void) const =0; - - virtual bool door_lowerDoorIsUnlocked(void) const =0; - - virtual uint8_t lock_switchLowerLock(uint8_t dir) const =0; - // dir 0=off 1=up 2=down - // move lock until stop cmd (0) - - virtual uint8_t lock_getDO_motors(void) const =0; - // bit0: upper lock forward bit 1 backward - // bit2: lower lock forward bit 3 backward - - virtual uint8_t lock_openLowerDoor(void) const =0; - // there's no closing function as Lock always makes one complete cycle and can be locked again immed. - - virtual uint8_t lock_closeLowerDoor(void) const =0; - - virtual bool door_isLowerDoorOpen(void) const =0; - - virtual uint8_t vault_getSwitches(void) const =0; - // retval bit0: cash box, bit 1: bill box - - virtual bool vault_isVaultDoorOpen(void) const =0; - - virtual void lock_switchVaultDoor(void) const =0; - - virtual bool vault_isCoinVaultIn(void) const =0; - - virtual bool vault_isBillVaultIn(void) const =0; - -// 21 - - - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - // LEDs, Barrier, Alarm, Relais, Aux - // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ - - virtual void led_switchLedIllumination(uint8_t on) const = 0; - - virtual void led_switchLedCoinbassin(uint8_t on, uint8_t ton, uint8_t tof) const =0; - - virtual bool led_coinIsOn(void) const =0; - // read back digital output from DC-uC-Port - virtual bool led_frontIsOn(void) const =0; - - virtual void led_switchLedService(uint8_t on) const =0; - // on=1 off=0 - virtual bool led_insideIsOn(void) const =0; - - virtual void led_switchLedPaper(uint8_t on, uint8_t ton, uint8_t tof) const =0; - virtual bool led_ticketIsOn(void) const =0; - - virtual void led_switchLedStart(uint8_t on, uint8_t ton, uint8_t tof) const =0; - virtual bool led_StartIsOn(void) const =0; - - virtual void led_switchLedPinPad(uint8_t on, uint8_t ton, uint8_t tof) const =0; - virtual bool led_pinIsOn(void) const =0; - - - virtual void fan_switchFan(bool on) const =0; - virtual void alarm_switchSiren(bool on) const =0; - virtual bool fan_isOn(void) const =0; - - virtual bool siren_isOn(void) const =0; - - virtual void bar_OpenBarrier(bool open) const =0; - virtual bool bar_relayIsOn(void) const =0; - - virtual bool bar_optoIn1isOn(void) const =0; - - virtual bool bar_optoIn2isOn(void) const =0; - - virtual void aux_power(bool on) const =0; - virtual bool aux_powerIsOn(void) const =0; - - virtual void aux_setUsage(uint8_t PinDirection) const =0; - virtual void aux_setOutputs(uint8_t PinIsHigh) const =0; - - virtual bool aux_isAuxPowerOn(void) const =0; - - virtual uint8_t aux_getAuxInputs(void) const =0; - - - -// ------------------------------------------------------------------------------------ -// 27.3.2023: Use Device-Controller's Bootloader to send hex-file -// ------------------------------------------------------------------------------------ - - virtual void bl_rebootDC(void) const =0; - - virtual void bl_startBL(void) const = 0; - // send command within 4s after DC power-on, otherwise bl is left - - virtual bool bl_checkBL(void) const = 0; - // send command to verify if bl is up - - virtual bool bl_isUp(void) const =0; - // return true is bl is up and running - // also initializes "sendFile" - - virtual void bl_sendAddress(uint16_t blockNumber) const=0; - // send start address, nr of 64byte-block, start with 0 - // will be sent only for following block-numbers: - // 0, 1024, 2048, 3072 and 4096, so basically every 64kByte - // for other addresses nothing happens - - virtual uint8_t bl_wasSendingAddOK(void) const=0; - // return val: 0: no response by now 1:error 10: OK - - virtual void bl_openBinary(void) const=0; - // to be used within CashAgent, momentary not processed - - virtual void bl_sendDataBlock(uint8_t length, uint8_t *buffer) const=0; - // send 64 byte from bin file - - virtual void bl_sendLastBlock(void) const=0; - // send this command after all data are transfered - - virtual uint8_t bl_wasSendingDataOK(void) const=0; - // return val: 0: no response by now 1:error 10: OK - - virtual void bl_stopBL(void) const=0; - // leave BL and start (the new) application - - //virtual bool bl_isDiagAvailable(void) const=0; - - //virtual QString dc_getDiagText(void) const=0; - - - // Komplett-schreib Funktion, noch nicht getestet - // Nachteil: keine Rückmeldung wie lang's noch dauert - //virtual void bl_startSending(void) const=0; - // call once after BL is working and file is loaded - //virtual void bl_sendFile(void) const=0; - // call cyclic while loading bin-file to bootloader - - - - -// ------------------------------------------------------------------------------------ -// 6.4.2023: new functions for coin collection and printing -// some new system functions -// ------------------------------------------------------------------------------------ - - virtual bool rtc_setTimeDateDirect(struct Trtc_DateTime *DateTime) const=0; - // return true if sending, false if cmd-stack is full - - virtual bool rtc_getExtendedTime(uint8_t *leng, uint8_t *data) const=0; -/* - buf[0]=GlobTime.Hours; - buf[1]=GlobTime.Min; - buf[2]=GlobTime.Sec; - buf[3]=GlobTime.Year; - buf[4]=GlobTime.Month; - buf[5]=GlobTime.Day; - buf[6]=GlobTime.DOW; - buf[7]=' '; // immer auf 32bit auffüllen sonst Speicherproblem beim Master! - uitmp=GlobTime.MinOfDay; - buf[8]=swl_getOneByteFromUint(uitmp, 0); - buf[9]=swl_getOneByteFromUint(uitmp, 1); - buf[10]=' '; - buf[11]=' '; - ultmp=GlobTime.SecOfDay; - buf[12]=swl_getOneByteFromUlong(ultmp, 0); - buf[13]=swl_getOneByteFromUlong(ultmp, 1); - buf[14]=swl_getOneByteFromUlong(ultmp, 2); - buf[15]=swl_getOneByteFromUlong(ultmp, 3); - - buf[16]=swl_isLeap(GlobTime.Year); - buf[17]=swl_getNextLeapYear(GlobTime.Year); - buf[18]=swl_getLastLeapYear(GlobTime.Year); - buf[19]=swl_hoursOfThisWeek(GlobTime.DOW, GlobTime.Hours); - - uitmp=swl_minutesOfThisWeek(GlobTime.DOW, GlobTime.Hours, GlobTime.Min); - buf[20]=swl_getOneByteFromUint(uitmp, 0); // 0=low byte 1=high byte - buf[21]=swl_getOneByteFromUint(uitmp, 1); - - uitmp=swl_hoursOfThisMonth(GlobTime.Day, GlobTime.Hours); - buf[22]=swl_getOneByteFromUint(uitmp, 0); - buf[23]=swl_getOneByteFromUint(uitmp, 1); - - uitmp=swl_minutesOfThisMonth(GlobTime.Day, GlobTime.Hours, GlobTime.Min); - buf[24]=swl_getOneByteFromUint(uitmp, 0); - buf[25]=swl_getOneByteFromUint(uitmp, 1); - - uitmp=swl_GetDaysOfYear(GlobTime.Year, GlobTime.Month, GlobTime.Day); - buf[26]=swl_getOneByteFromUint(uitmp, 0); - buf[27]=swl_getOneByteFromUint(uitmp, 1); - - uitmp=swl_GetHoursOfYear(GlobTime.Year, GlobTime.Month, GlobTime.Day, GlobTime.Hours); - buf[28]=swl_getOneByteFromUint(uitmp, 0); - buf[29]=swl_getOneByteFromUint(uitmp, 1); - buf[30]=0; - buf[31]=0; - ultmp= swl_GetMinutesOfYear(GlobTime.Year, GlobTime.Month, GlobTime.Day, - GlobTime.Hours, GlobTime.Min); - buf[32]=swl_getOneByteFromUlong(ultmp, 0); - buf[33]=swl_getOneByteFromUlong(ultmp, 1); - buf[34]=swl_getOneByteFromUlong(ultmp, 2); - buf[35]=swl_getOneByteFromUlong(ultmp, 3); - - buf[36]=rtc_getSqwaveSettings(); - buf[37]=0; - buf[38]=0; - buf[39]=0; - - ultmp= 0; // Minutes of the Millenium - buf[40]=swl_getOneByteFromUlong(ultmp, 0); - buf[41]=swl_getOneByteFromUlong(ultmp, 1); - buf[42]=swl_getOneByteFromUlong(ultmp, 2); - buf[43]=swl_getOneByteFromUlong(ultmp, 3); - - dc2prot_setReadData(44, buf); - - */ - - virtual bool sys_runCompleteTest(void) const=0; - // warning: lasts 20s in one pace - // return true if sending, false if cmd-stack is full - - virtual bool sys_ready4sending(void) const=0; - // return true if a Json-file can be sent - - virtual bool sys_sendJsonFileToDc(uint8_t kindOfFile, uint8_t nrOfTemplate, uint8_t *content ) const=0; - // kindOfFile: 1=config, 2=device, 3=cash, 4=serial, 5=time, 6=printer - // nrOfTemplate=1...32 if kindOfFile==6 - // content = content of the Json file, max 800byte ascii signs - // file is 0-terminated - // return true if sending, false if cmd-stack is full - - virtual bool prn_sendDynamicPrnValues(uint8_t *dynPrnVal ) const=0; - // dynPrnVal = array of 8 Variables with 8 byte each, come as ascii string - // like: char prn_dynPrnVal[8][8]; - // return true if sending, false if cmd-stack is full - - virtual bool prn_printTemplate(uint8_t nrOftemplate) const=0; - // print one of the templates loaded by Json prior - // nr = 1..32 - // return true if sending, false if cmd-stack is full - - virtual void log_getHoldAccountNumbers(uint32_t *accNr ) const=0; - // returns all acc nrs of the backuped vault records - // use: uint32_t backupedAccNumbers[8] - - virtual bool log_selectVaultRecord(uint16_t accountNr ) const=0; - // return true if sending, false if cmd-stack is full - -//request, isAvailable -virtual void log_getVaultRecord(struct T_vaultRecord *retVR) const=0; - // which was selected by: log_selectVaultRecord() - // to be forwarded to Ismas - - virtual bool prn_printAccountReceipt(void) const=0; - // return true if sending to DC OK, false if cmd-stack is full - - virtual bool prn_printTestTicket(void) const=0; - // return true if sending to DC OK, false if cmd-stack is full - - virtual bool cash_startPayment(uint16_t amount) const=0; - - virtual uint32_t getInsertedAmount(void) const=0; - - virtual uint16_t getLastInsertedCoin(void) const=0; - - virtual bool getAllInsertedCoins(uint16_t *types, uint16_t *values) const=0; - // all inserted coins (max 64) since "cash_startPayment" - - virtual bool cash_cancelPayment(void) const=0; - // and return coins - - virtual bool cash_stopPayment(void) const=0; - // and keep coins in escrow - - // after ticket/goods issue: - virtual bool vend_success(void) const=0; - // conclude payment process, encash all inserted coins to vault. Printing was successful - // if possible return change - - virtual bool vend_failed(void) const=0; - // conclude payment process and return all inserted coins - - - - - - - virtual uint8_t mif_getCardType(QString cardholder) const=0; - // return 1,2,3,4 = upper, lower access card, printer test, coin test - // cardholder: 7byte Name-String - - virtual uint64_t sys_getWakeSource(void) const =0; - // retval: 6 bytes, bit coded, 1=event keeps DC awake - - //virtual void sys_getDeviceConditions(struct T_moduleCondition *devCond) const=0; - virtual void sys_getDeviceConditions(uint8_t *leng, uint8_t *data) const=0; - /* - - outBuf[0]=modCond.ram; - outBuf[1]=modCond.intEe; - outBuf[2]=modCond.extEe; - outBuf[3]=modCond.rtc; - outBuf[4]=modCond.boardHw; - outBuf[5]=modCond.printer; - outBuf[6]=modCond.modem; - outBuf[7]=modCond.signal; - outBuf[8]=modCond.regist; - outBuf[9]=modCond.mdbBus; - outBuf[10]=modCond.coinChecker; - outBuf[11]=modCond.coinEscrow; - outBuf[12]=modCond.mifareReader; - outBuf[13]=modCond.creditTerm; - outBuf[14]=modCond.coinReject; - outBuf[15]=modCond.coinSafe; - outBuf[16]=modCond.billSafe; - outBuf[17]=modCond.voltage; - outBuf[18]=modCond.temper; - outBuf[19]=modCond.poweronTest; - outBuf[20]=modCond.doorState; - outBuf[21]=modCond.doorWasOpened; - outBuf[22]=modCond.changer; - outBuf[23]=modCond.coinBlocker; - outBuf[24]=modCond.billReader; - outBuf[25]=modCond.ResetReason; - outBuf[26]=modCond.allModulesChecked; - outBuf[27]=modCond.alarmState; - outBuf[28]=0; - outBuf[29]=0; - - */ - - - //virtual void sys_getDynMachineConditions(struct T_dynamicCondition *dynMachCond) const=0; - virtual void sys_getDynMachineConditions(uint8_t *leng, uint8_t *data) const=0; -/* - - outBuf[pBuf++]=dynCond.allDoorsDebounced; - outBuf[pBuf++]=dynCond.openedAuthorized; - outBuf[pBuf++]=dynCond.CBinDebounced; - outBuf[pBuf++]=dynCond.upperDoor; - - outBuf[pBuf++]=dynCond.middleDoor; - outBuf[pBuf++]=dynCond.lowerDoor; - outBuf[pBuf++]=dynCond.coinBox; - outBuf[pBuf++]=dynCond.billBox; - - outBuf[pBuf++]=dynCond.modeAbrech; - outBuf[pBuf++]=dynCond.onAlarm; - outBuf[pBuf++]=dynCond.nowCardTest; - outBuf[pBuf++]=dynCond.nowPayment; - - outBuf[pBuf++]=dynCond.lastMifCardType; - outBuf[pBuf++]=dynCond.lastSDoorState; - outBuf[pBuf++]=dynCond.lastVDoorState; - outBuf[pBuf++]=dynCond.lastCBstate; - - outBuf[pBuf++]=dynCond.paymentInProgress; - outBuf[pBuf++]=0; - uitmp=dynCond.U_Batt; - outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETLOWBYT); - outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); - uitmp=dynCond.Temperatur; - outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETLOWBYT); - outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); - - uitmp=dynCond.nrCoinsInBox; // send seperate also - outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETLOWBYT); - outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); - - ultmp=dynCond.amountInBox; // send seperate also - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWESTBYT); - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWMID); - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHMID); - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHESTBYT); - - ultmp=dynCond.totalTransVolume; - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWESTBYT); - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWMID); - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHMID); - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHESTBYT); - - ultmp=dynCond.totalNrOfVends; - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWESTBYT); - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWMID); - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHMID); - outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHESTBYT); -// 36 - outBuf[pBuf++]=dynCond.jsonValid_config; - outBuf[pBuf++]=dynCond.jsonValid_device; - outBuf[pBuf++]=dynCond.jsonValid_cash; - outBuf[pBuf++]=dynCond.jsonValid_print; - outBuf[pBuf++]=dynCond.jsonValid_serial; - outBuf[pBuf++]=dynCond.jsonValid_time; - outBuf[pBuf++]=dynCond.lastFileType; - outBuf[pBuf++]=0; - -*/ - - -}; - - -// History -// 11.10.2021: V1.0 222 functions -// 23.12.2021: V1.1 added block-parameter to function "read mifare data" -// 30.12.2021: V1.2 added function: mif_clearDataBuffer(), mif_isBlockAvailable(uint8_t blkNr) and mif_getAvailableDataBlocks() -// 1.1.2022: V1.3 Mifare extended. ( background: read 16 x 48byte from card to DC, read 12 x 64byte from DC to CA) -// new: read full card with 768bytes from HWapi without block borders -// added: mif_getNrOfAvailableDataBytes mif_getCardData768byteDec(uint8_t *buf, uint16_t bufferSize) -// mif_getCardDataDec(uint16_t fromAddr, uint16_t toAddr, uint8_t *buf, uint16_t bufferSize) -// mif_getCardDataStr(bool useHexFormat, char seperator) - -// 29.03.2023: V3.1 some extensions for PSA1256_ptu5, -// V3.2 Bootloader improvement -// 12.04.2023: V3.3 new features extended: loading and using Json-files, cash-collection, cash-data-logging - -//#define HWINF_iid "Atb.Psa2020.software.HWapi/3.1" -//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.1" -#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.3" - - - -Q_DECLARE_INTERFACE(hwinf, HWINF_iid) - - -#endif - - - +#ifndef INTERFACE_H +#define INTERFACE_H + +#include + + + +struct T_emp +{ + + // Fixdata from EMP: + uint8_t shaft; // = changer level + uint16_t countryCode; + uint8_t scale; + uint8_t decimals; + uint8_t coinValues[16]; + uint16_t routing; + + // Master specs: + uint8_t gotSetup; // 1: got specifications from master 0: no specs + uint16_t coinAccept; // bit 0 = coin1 bit H=accept + uint8_t tokenChannel; + uint16_t denomination[16]; + + // dynamic: + uint8_t state; // step counter of EMP (electronic coin checker) FSM (finite state machine): + // 0=Emp & Bus power off, 1=powered, poll off 2=polling on + // 3=device responded, requesting status + // 4=waiting for status 5=have status, + // 6: IDLE, have paramters from master, polling running, ready for payment + // Master can stop/start polling and acceptance + // 7: end of transaction, polling on, accept off, reporting coins, (wait for last coin) + // 8: transaction running, polling on, acceptance on, reporting coins, + + uint8_t pollingRunning; + uint8_t paymentRunning; + +}; + +struct Trtc_DateTime +{ + uint8_t rtc_hour; + uint8_t rtc_min; + uint8_t rtc_sec; + uint8_t rtc_dayOfMonth; + uint8_t rtc_month; + uint8_t rtc_year; + uint8_t rtc_dayOfWeek; +}; + +struct Tprn_hw_state +{ + // hardware (IO's) + bool powerRdBk; // prn pwr is on + bool rsSwOk; // serial switch (printer or modem) is set to printer + bool rsDrvOk; // RS232 converter for PTU, Printer and Modem in on + + bool ReadyLine; // HW signal from printer showing ready + bool inIdle; // powered and free from errors + bool paperNearEnd; // paper roll runs out + bool noPaper; + bool ErrorTemp; + bool HeadOpen; + bool cutterJam; + bool noResponse; // printer is not connected, cable broken, wrong baudrate + bool badResponse; +}; + + struct Tprn_currentSettings +{ + uint8_t currFont; + uint8_t currSize; + uint8_t currHeigth; + uint8_t currWidth; + bool nowBold; + bool nowInvers; + bool nowUnderlined; + uint8_t currDensity; + uint8_t currSpeed; + bool nowAligned; +}; + + struct T_dynDat +{ + uint8_t licensePlate[8]; + uint8_t vendingPrice[8]; + uint8_t parkingEnd[8]; + uint8_t currentTime[8]; + uint8_t currentDate[8]; + uint8_t dynDat5[8]; + uint8_t dynDat6[8]; + uint8_t dynDat7[8]; +}; + + +struct T_vaultRecord +{ + + // Kassenbeleg (Abrechnungsdatensatz = Kassenwechsel-Datensatz) + char startbuffer[4]; // Psa> // never move or change this 1st entry + uint16_t AccountingNumber; + uint16_t CUNU; + uint16_t MANU; + uint16_t resint1; + //uint16_t resint2; + + char label1buffer[4]; // tim> + uint8_t year; + uint8_t month; + uint8_t dom; + uint8_t hour; + uint8_t min; + uint8_t sec; + uint8_t DoW; + uint8_t reschar3; + + char label2buffer[4]; // abs> + uint32_t AbsIncome1; + uint32_t AbsReserve; + uint32_t AbsNrOfCuts; + +//16 + char label3buffer[4]; // mw > + + // Verkauf, Tür zu: + uint32_t VKcoinsInserted[16]; // nur für Wechsler, soviel wurde eingeworfen + uint32_t VKcoinsReturned[6]; // nur für Wechsler, Anzahl Münzen pro Typ, soviel wurde zurückgegeben +//88 + + // Service, Tür offen: + uint16_t ServCoinsInserted[16]; // nur für Wechsler, soviel wurde eingeworfen + uint16_t ServCoinsReturned[6]; // nur für Wechsler, Anzahl Münzen pro Typ, soviel wurde zurückgegeben + uint16_t resint3; + uint16_t resint4; + uint16_t currentTubeContent[6]; // nur für Wechsler, aktueller Füllstand + uint16_t resint5; + uint16_t resint6; +// 56 + + char label4buffer[4]; // box> + uint16_t coinsInVault[16]; + uint16_t billsInStacker[8]; +// 48 + + char label5buffer[4]; // val> + // actually constant unless exchange rate is changed + uint16_t coinDenomination[16]; // 5..50000 (z.B. 2? sind in Ungarn 760Ft) + uint16_t billDenom[8]; + uint16_t tubeDenom[6]; + uint16_t exchangeRate; + uint16_t resint9; + +// 64 + + char endofblock[4]; // end> + +// 316 byte Block im Speicher + +}; + +struct T_moduleCondition +{ + // store conditon of all system components, hold in RAM + // 0 means unknown, not yet tested/used + // 1 means OK + // 50..99 = HINT / Notification + // 100..150 = WARNING + // 200..250 = ERROR + + uint8_t structStart; // always first!!! + uint8_t ram; // v + uint8_t intEe; // v + uint8_t extEe; // v + + uint8_t rtc; // 1: time/date OK 100: time not plausible 200: hardware error + uint8_t boardHw; // v + uint8_t printer; // v + uint8_t modem; // v + + uint8_t signal; // 1...99 + uint8_t regist; // 100:not 1:reg 2:ping OK 3:gotTime + uint8_t mdbBus; + uint8_t coinChecker; // EMP, OMP or mei-cashflow + + uint8_t coinEscrow; // v + uint8_t mifareReader; // v + uint8_t creditTerm; // not available + uint8_t coinReject; // v + + uint8_t coinSafe; // v + uint8_t billSafe; // v + uint8_t voltage; // v // 1:11..14V + uint8_t temper; // v + + uint8_t poweronTest; + uint8_t doorState; // 1: alles zu 200: t?r offen + bit1(S) +bit2(CB) + bit3(CB) + uint8_t doorWasOpened; // 1: all doors are closed 200: any door was just opened + uint8_t changer; // can only be tested by usage + + uint8_t coinBlocker; // can only be tested by usage + uint8_t billReader; // can only be tested by usage + uint8_t ResetReason; + uint8_t allModulesChecked; + + uint8_t alarmState; + uint8_t res11; + uint8_t res12; + uint8_t res13; + +}; + +struct T_dynamicCondition +{ + // dynamic conditions, change rapidly and frequently + // these are values for the Heartbeat + + // T?rschalter entprellt: + char upperDoor; // 0:fehlt 1:drin + char middleDoor; + char lowerDoor; + char coinBox; + + char billBox; + char modeAbrech; + char onAlarm; + char nowCardTest; + + char nowPayment; + char lastMifCardType; + char openedAuthorized; + char allDoorsDebounced; + + uint8_t lastSDoorState; + uint8_t lastVDoorState; + uint8_t CBinDebounced; + uint8_t lastCBstate; + + char paymentInProgress; + char res1; + char res2; + char res3; + + uint16_t U_Batt; + uint16_t Temperatur; + + uint16_t cash_storedaccNumbers[8]; // List all stored accounting numbers in ext. eeprom + + uint16_t nrCoinsInBox; + uint16_t resui1; + + uint32_t amountInBox; + uint32_t amountJustPaid; + + uint16_t lastInsCoinType; // wahrscheinlich uchar + uint16_t resui2; + + uint32_t totalTransVolume; + uint32_t totalNrOfVends; + +}; + + +class hwinf +{ + +public: + enum class DownloadResult {OK, ERROR, TIMEOUT, NOP}; + enum class FileTypeJson {CONFIG=1, DEVICE, CASH, SERIAL, TIME, PRINTER}; + + virtual ~hwinf() {} + + + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // Use serial interface and protocol stack in Cashagent-Library + // Sending Output data to DeviceController DC2b + // Sending input requests to DC2 (single or auto-batch) + // Getting input data as receiver payload + // Furthermore the Cashagent-Library answers with status strings about sending and reading result + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual bool dc_openSerial(int BaudNr, QString BaudStr, QString ComName, uint8_t connect) const = 0; + // Command: open serial interface + // BaudNr: 0:1200 1:9600 2:19200 3:38400 4:57600 5:115200 + // BaudStr: for exapmle "19200" + // ComName: for example "COM48" + // connect: 0, 1 + + virtual bool dc_closeSerial(void) const = 0; + // Command: close serial interface in order to save power while power down + // or if another port must be used + + virtual bool dc_isPortOpen(void) const =0; + // returns true if port open (don't send unless open. Sending to closed port will crash program) + + + + virtual uint8_t test_serialState(void) const =0; + // test on-board signals for the serials + // serial drv on/off, Serial mux1, Serial mux2 + + virtual bool test_serialIsOn(void) const =0; + + virtual bool dc_updateDC(QString binFileName, + QString baudrate, + QString comPort) const = 0; + // download binary file down into device controller + + virtual void dc_autoRequest(bool on) const =0; + // on = true: select that all READ-Requests are sent automatically + // on = false: select that all READ-Requests are sent manually one by one + // Every input information from DC2 must be requested + // ( digital and analog sensors, get time/date, get status information ) + + virtual uint8_t dc_isRequestDone(void) const =0; + // retval: 0: request is still in progress + // 1: answer from DC2 was OK + // 2: wrong answer from DC2 + + virtual uint16_t dc_getCompletePayLoad(uint16_t plBufSiz, uint8_t *payLoad) const =0; + // get data back in "payLoad", max 64 byte, can be used for diagnosis + // retval = nr of bytes received. If host buffer too small then + // only plBufSiz bytes are copied to "payLoad" + // plBufSiz­z=size of host buffer + + virtual void dc_requTestResponse() const =0; + // tell DC2 to send a test-string, useful to see if cable and baudrate is OK + + virtual bool dc_readAnswTestResponse() const =0; + // retval: true: test was successful, got right response + + virtual uint8_t getRawRecLength(void) const =0; + // only needed if protocol stack in Cashagent-Library is bypassed + + virtual uint8_t getRawReceivedData(uint8_t *receivedData) const =0; + // only needed if protocol stack in Cashagent-Library is bypassed + + virtual QString dc_getSerialState(void) const =0; + // get result of opening-command like "ttyS0 opened with 115200 8N1! + // or error messages like "comport not available..." + // was saved by last opening event, can be passed for 100ms + + virtual void dc_clrSerialStateText(void) const =0; + // clear above text to avoid multiple repetive displaying + + + virtual QString dc_getTxt4HsStateLine(void) const =0; + // return string with status of handshakes + + virtual void dc_clrTxt4HsStateLine(void) const =0; + // clear above text to avoid multiple repetive displaying + + + virtual QString dc_getTxt4masterStateLine(void) const =0; + // returns string telling if the received packet is valid and complies protocol + // if OK: "slave response OK" in case of error: "wrong length received", "wrong start sign received", + // "received datalen to big", "wrong data len received", "wrong crc received" + + virtual void dc_clrTxt4masterStateLine(void) const =0; + // clear above text to avoid multiple repetive displaying + + + virtual QString dc_getTxt4resultStateLine(void) const =0; + // returns string telling response of DC. First question: did DC get a correct request telegram? + // and if: 2nd question did DC perform the contained output and input commands + // if OK: "Slave OUT and IN Result: 0 0" + // in case of error: "slave got wrong start sign" ..length" ...crc" ... address" + // slave does not perform and command! + // 2nd) received telegram was OK, DC tried to perform the master commands. result + // result of writing data (e.g switching leds and motors, sending stuff to printer...) + // OUT = 0: OK 1: unknown command 2: operation not possible + // result of reading data (e.g. switches, voltages, accepted coins, printer status....) + // IN = 0: OK 1: unknown command 2: could not read due to hardware error 3: could not read because device is off + + virtual void dc_clrTxt4resultStateLine(void) const =0; + // clear above text to avoid multiple repetive displaying + + + virtual QString dc_getdataStateLine(void) const =0; + // check if recveied input data are ok/valid + // OK-string : "valid INdata...." with protocol details + // not OK: string empty + + virtual void dc_clrTxt4dataStateLine(void) const =0; + // clear above text to avoid multiple repetive displaying + + + virtual QString dc_getdatifLine(void) const =0; + // returns string with result of function dc_requTestResponse() + // "correct" or "false" + + virtual void dc_clrTxt4datifLine(void) const =0; + // clear above text to avoid multiple repetive displaying + + + virtual QString dc_getTxt4RsDiagWin(void) const =0; + // returns string to be displayed in "serial traffic" window + // details about sent and received protocol + + virtual void dc_clrTxt4RsDiagWin(void) const =0; + // clear above text to avoid multiple repetive displaying + + virtual QString dc_get2ndTxt4RsDiagWin(void) const =0; + // returns string to be displayed in "serial traffic" window + // details about sent and received protocol + + virtual void dc_clr2ndTxt4RsDiagWin(void) const =0; + // clear above text to avoid multiple repetive displaying + + +// 28 functions + + + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // DC2b internal data + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + + virtual QString dc_getSerialParams(void) const =0; + // get DC2 serial settings (not very meaningful as they will not come if different from master settings) + + virtual QString dc_getHWversion(void) const =0; + // get DC2 hardware version + + virtual QString dc_getSWversion(void) const =0; + // get DC2 software version + + virtual QString dc_getState(void) const =0; + // get DC2 status (every OK or any error/warning? ) + + + // UID - unique number, different in every DC + virtual void dc_getUID8byte(uint8_t *buf8byteUid) const =0; + // get 8 single bytes in buffer + + virtual QString dc_getUIDstr() const =0; + // get as string + + virtual uint64_t dc_getUIDnumber(void) const =0; + // get UID as one long number + + // Analog values: + virtual uint32_t dc_getTemperature(void) const =0; + // in Sax-Format 0...400 (0=-50,0°C 100=0,0°C 141=20,5°C 400=150,0°C) + + virtual QString dc_getTemperaturStr(void) const =0; + // as string like "-12,5°C" + + virtual uint32_t dc_getVoltage(void) const =0; + // as value in mV, 0...65,535V + + virtual QString dc_getVoltagStr(void) const =0; + // as string in mV + + virtual bool dc_mainFuseIsOk(void) const=0; + // true if 12V fuse is OK + // false: fuse blown, DC will continue working but no 12V device can be used! + + virtual void dc_setWakeFrequency(uint8_t period) const =0; + // RTC wakes DC2 (and PTU) by hardware signal every 32seconds + // change wake signal period to 1...64s + + virtual void dc_OrderToReset(void) const =0; + // want DC2 to reset (in order to start Bootloader) + + + + // all read-requests can be sent manually by the following functions + // or automatically in background by: void hwapi::dc_autoRequest(bool on) + // in other words: + // if automatic-reading is on, then there's no need to send any of these commands, + // but it's allowed to send them in order to speed up the refreshing of the inputs + + virtual void request_DC2serialConfig() const =0; + // read-request can be sent manually by this function, not needed if auto-request is on + + virtual void request_DC2_HWversion() const =0; + // read-request can be sent manually by this function, not needed if auto-request is on + virtual void request_DC2_SWversion() const =0; + // read-request can be sent manually by this function, not needed if auto-request is on + virtual void request_DC2_condition() const =0; + // read-request can be sent manually by this function, not needed if auto-request is on + virtual void request_DC2_UID() const =0; + // read-request can be sent manually by this function, not needed if auto-request is on + + + virtual void request_DC2_analogues() const =0; + // read-request can be sent manually by this function, not needed if auto-request is on + virtual void request_DC2_digitalInputs() const =0; + // read-request can be sent manually by this function, not needed if auto-request is on + virtual void request_DC2_digitalOutputs() const =0; + // read-request can be sent manually by this function, not needed if auto-request is on + +// 22 + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // using DC2 Bootloader + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void bl_sendDataDirectly(uint8_t length, uint8_t *buf) const =0; + // send without protocol frame, needed for the DC bootloader + + virtual void bl_iniChain(void) const =0; + + virtual bool bl_importBinFile(QByteArray readBinFile, uint32_t fileSize, char withDispl) const =0; + + virtual uint8_t bl_activatBootloader(uint8_t *sendData) const =0; + + virtual uint8_t bl_startChain(void) const =0; + + virtual uint8_t bl_readBLversion(uint8_t *sendData) const =0; + // minimum size of sendData-buffer: 5byte retval: length + + virtual uint8_t bl_readFWversion(uint8_t *sendData) const =0; + // minimum size of sendData-buffer: 5byte retval: length + + virtual uint8_t bl_prepareDC_BLcmd(uint8_t Cmd, uint8_t SendDataLength, uint8_t *sendData, uint8_t *outBuf) const =0; + // make BL protocol, retval = outbuf length (5...133) + // bring data in correct form: start always with 0x02 finish with 0x03 and append checksum + // 0x02 Cmd < ...sendData ..> CRC CRC 0x03 + // Data length = 0...64 + // special conversion: if data contain 2 or 3 (STX, ETX) then write two bytes: 0x1B (=ESC) and data|0x80 + // so maxlength = 5 + 2 x 64 (if all data are 2 or 3) without 2,3: maxlength = 5 + 64 + + virtual uint8_t bl_exitBL(uint8_t *sendData) const =0; + // minimum size of sendData-buffer: 5byte retval: length + + + + +// 9 + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // get Time and Date from DC2b (contains a buffered real time clock) valid for about three days without power + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual uint8_t rtc_getDateTime(struct Trtc_DateTime *rtc_DateTime) const =0; + + virtual uint8_t rtc_setDateTime(void) const =0; + // synch DC2 with PC or PTU system time and date + + virtual void rtc_getTime(uint8_t *hh, uint8_t *mm, uint8_t *ss) const =0; + // get time directly + + virtual void rtc_getDate(uint8_t *yy, uint8_t *mm, uint8_t *dd) const =0; + // get date directly + + virtual uint8_t rtc_getToday(uint8_t *dow, uint16_t *minOfToday, uint32_t *secOfToday) const =0; + // dow=day of week, 1=monday...7 + // minOfToday: 0=midnight...1439= 23:59 + // secOfToday: 0=midnight...86399= 23:59:59 + + virtual bool rtc_isLeapYear(uint8_t *lastLeapYear, uint8_t *NextLeapYear) const =0; + // retval true: this year is leap year + + virtual bool rtc_isLeapYear() const =0; + + virtual void rtc_getWeek(uint8_t *DayOfWeek, uint8_t *HoursOfWeek, uint16_t *MinutesOfWeek) const =0; + // DayOfWeek: 1=monday...7 + // HoursOfWeek: 0=Monday 0:00 o'clock...167=Sunday 23:00 + // MinutesOfWeek: 0=Monday 0:00 o'clock...10079=Sunday 23:59 + + virtual void rtc_getMonth(uint8_t *DayOfMonth, uint16_t *HoursOfMonth, uint16_t *MinutesOfMonth) const =0; + // DayOfMonth: 1...31 + // HoursOfMonth: 0 = 0:00o'clock of 1.day in month up to 743 + // MinutesOfMonth:0 = 0:00o'clock of 1.day in month up to 44639 + + virtual void rtc_getYear(uint16_t *DayOfYear, uint16_t *HoursOfYear, uint32_t *MinutesOfYear) const =0; + // DayOfYear: 1...366 1= 1.Jan of this current year + // HoursOfYear: 0=1.Jan 0:00o'clock ...8783=31.12 23 o'clock + // MinutesOfYear: 0=1.Jan 0:00o'clock ...527039=31.12 23:59 o'clock + + virtual QString rtc_getTimStr(void) const =0; + virtual QString rtc_getDatStr(void) const =0; + virtual QString rtc_getTimDatStr(void) const =0; + + + + + virtual void request_DC2_TimeAndDate() const =0; + // read-request can be sent manually by this function, not needed if auto-request is on + + + +// 14 + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // PTU, Master + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void ptu_switchWake(bool WAKEACTIVE) const =0; + + virtual bool ptu_WakeINisActive(void) const =0; + + virtual bool ptu_WakeOutIsOn(void) const =0; + + virtual void sendDeviceSettings(uint8_t kindOfPrinter, uint8_t kindOfCoinChecker, + uint8_t kindOfMifareReader, uint8_t suppressSleep, + uint8_t kindOfModem, uint8_t kindOfCredit ) const =0; + // enable hardware in device controller: + // kindOfPrinter: 0:off 1: GPT4672 (only this one implemented) + // kindOfCoinChecker: 0:off 1:EMP820 2:EMP900 3: C²_changer + // kindOfMifareReader: 0:off 1: SL025 (only this one implemented) + // suppressSleep: 0:sleep allowed 1: sleep surpressed for special reason + // kindOfModem: 0:off 1: ATB_Sunlink_LTE (not yet implemented) + // kindOfCredit: 0:off 1: cVendTopp 2:cVendPin (not yet implemented) + + + virtual void request_ReadbackDeviceSettings() const =0; + + virtual void readback_DeviceSettings(uint8_t *length, uint8_t *data) const =0; +/* + buf66[0]=devPara.kindOfPrinter; + buf66[1]=devPara.kindOfCoinChecker; + buf66[2]=devPara.kindOfMifareReader; + buf66[3]=devPara.suppressSleepMode; + buf66[4]=devPara.kindOfModem; + buf66[5]=devPara.kindOfCreditcard; + buf66[6]=devPara.CoinEscrow; + buf66[7]=devPara.CoinRejectUnit; + buf66[8]=devPara.CoinShutter; + buf66[9]=devPara.BillAcceptor; + buf66[10]=devPara.usevaultLock; + buf66[11]=devPara.autoAlarm; + buf66[12]=devPara.autoOpen; + buf66[13]=devPara.printAccReceipt; + buf66[14]=devPara.printDoorReceipt; + buf66[15]=devPara.printTokenTicket; + uitmp=devPara.VaultFullWarnLevel; + buf66[16]=swl_getOneByteFromUint(uitmp, GETLOWBYT); + buf66[17]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); + uitmp=devPara.VaultFullErrorLevel; + buf66[18]=swl_getOneByteFromUint(uitmp, GETLOWBYT); + buf66[19]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); + +*/ + + virtual void sendMachineID(uint16_t customerNr, uint16_t machineNr, + uint16_t borough, uint16_t zone, + uint16_t alias, char *location) const =0; + + virtual void request_ReadbackMachineID() const =0; + + virtual void readback_machineIDdata(uint8_t *length, uint8_t *data) const =0; + // state 5.5.21: byte[0,1]=customer number byte[2,3]=machine number + // byte[4,5]=borough byte[6,7]=zone byte[8,9]=alias name + // byte[10...41]=location + // 12.4.23TS still the same + + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // Printer + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + + + virtual void prn_switchPower(bool on) const =0; + + virtual bool prn_isPrinterPowerOn(void) const =0; + + virtual uint8_t prn_PrnFuseIsOk(void) const=0; + //retval: 0: fuse blown 1: fuse OK 2:unknown as printer power is off + + virtual bool prn_readyINisActive(void) const =0; + + virtual uint8_t cash_getLowPaperSensor(void) const=0; + // 0: Sensor sees paper 1: no paper 99: off + + // the following device state requests are deployed only if device is powered up: + virtual void request_PrinterHwState() const =0; + virtual void request_PrinterCurrentFonts() const =0; + virtual void request_PrinterStateComplete() const =0; + + virtual bool test_serialMux1isSetToPrinter(void) const =0; + + // read printer condition and settings + + virtual uint8_t prn_getHwState(struct Tprn_hw_state *prn_hw_state) const =0; + // retval: status byte + // byte 0 = 0: prnter OK, >0: error + // bit0: paper low 1: no paper 2: temperature error + // 3: head open 4: paper jam in cutter + // 6: no response 7: bad response from printer + // and return struct "Tprn_hw_state" + + virtual bool prn_isUpAndReady(void) const =0; + // true: printer is powered, serial is ok, no error, printer is connected and resonding + + virtual void prn_getCurrentFontSetting(struct Tprn_currentSettings *prn_fonts) const =0; + + + // send Commands to printer: + + virtual void prn_sendText(QByteArray *buf) const =0; + // up to 1280 bytes + + virtual void prn_sendPrnSysCmd(uint8_t para1, uint8_t para2, uint32_t para3) const =0; + // send three byte through to printer, see printers manual + + virtual void prn_sendPrnEscCmd(uint8_t para1, uint8_t para2, uint8_t para3, uint8_t para4) const =0; + // send four byte through to printer, see printers manual + + + virtual void prn_sendPrnSetup(uint16_t paperSpeed, uint8_t density, uint8_t alignment, uint8_t orientation) const =0; + // send 5 byte: byte 0,1: speed 5...250 mm/s + // byte2: density 0....(25)....50 + // byte3: alignment 'l', 'c', 'r' = left, center, right + // byte4: orientation 0, 90, 180 = 0°, 90°, 180° rotation (by now not supported!) + // not batched! don't use twice within 100ms + + virtual void prn_movePaper(uint8_t wayInMm, uint8_t direction) const =0; + //direction: 1=forward 2=backward + // + virtual void prn_setFonts(uint8_t font, uint8_t size, uint8_t width, uint8_t height) const =0; + // font = kind of font 5...11 (0..22) + // size = 6...20, 9..9: too tiny 10: small ...12 = normal size ...20=huge + // width: 0...4 0=1x 1=2x 2=4x (huge!) 3=8x 4=16x (3,4 make no sense) + // heigth: 0...7 = 1x...8x only 0,1,2,(3) make sense + + virtual void prn_setLetters(uint8_t bold, uint8_t invers, uint8_t underlined) const =0; + // bold: 0/1 + // invers: 0/1 + // underlined: 0/1 + + virtual void prn_cut(uint8_t kindof) const =0; + // kindof: 1=full cut 2=partial cut 3=eject (5xLF + full cut) + + virtual void prn_newLine(uint8_t nrOfLines) const =0; + + virtual void prn_printCompleteFontTable(void) const =0; + + virtual void prn_printBarcode(uint8_t kindOf, uint8_t withText, uint8_t offset, uint8_t rotation, uint8_t dataLeng, uint8_t *data) const =0; + // kind of barcode: 0=Code39 1=Code128 2=EAN13 3= 2/5interleaved 4=UPC-A 5=EAN8 + // withText: print readable text below + // offset: move by pixel from left border + // rotation + // dataLeng in byte + + virtual void prn_sendQRdata(QByteArray *buf) const =0; + // maximal 150 alphanummeric bytes + + virtual void prn_printQRcode(void) const =0; + // QRcode may have 1...150 alphanummeric data, must be transfered in advance + + + virtual void prn_printLogo(uint8_t nrOfLogo, uint8_t offset ) const =0; + // nrOfLogo: 1..4 in flash 5...8 in Ram + // offset: in mm form left border + + + + // ......................................................... + // Parking Ticket (print-out document) designer TD + // ......................................................... + + // Predefine document Layout (e.g. parking ticket) in advance and stroe it for quick and easy use + // in opposite to the above "single" commands you need only one or a few commands at vending time. + // Stored text is just send to printer once the printing command is issued + // stored commands within the text are interpreted and executed right at the place (in ticket) they are + // example: start bold, , stop bold + // Predefinition of up to 16 ticket Layouts is possible, 0...1280 byte each + // Number 0..15, al keept non-volatile + // up to 8 dynamic values can be defined in the template ("print val3 here") and will be sent with printing command + // example: print current time at this point (the time of printing not the storage time!!) + + virtual void pri_startTicketDesign(void) const =0; + // start for every new printer document, reseting collecting buffer + + // all further functions write/append text, numbers and command to the ticket-buffer, up to 1278 bytes allowed + // return val of the appending functions: true=ok false=too long, buffer full + + virtual int pri_TD_getCurrentSize(void) const =0; + // retval: 0...1278 + + virtual bool pri_TD_addText(QByteArray text) const =0; + // example: pri_TD_addText("Hello") const =0; + // example: pri_TD_addText(tempStr) const =0; + // retval: true=ok false=too long, buffer full + + virtual bool pri_TD_addValue(int val) const =0; + // +/- 0...2^(31) + + virtual bool pri_TD_addNewLine(void) const =0; + + virtual bool pri_TD_addSign(char sign) const =0; + // example: '.' ' ' 0x20 'W' '$' + + virtual bool pri_TD_addCommand(char group, char attribute, char p1, char p2, char p3, char p4, char p5) const =0; + // always add 8 byte to the ticket layout: ESC & group & attribute & parameter1...5 + /* complete list of possible commands: + group 50 : paper + attribute 10 : move forward + p1: wayInMm p2: direction + attribute 11 : cut + p1: kind of, 1=full 2=partial, 3=eject + attribute 12 : new line(s) + p1: nr of lines 1...100 + + group 51 : fonts + attribute 10 : kind of font see description above + p1: 0...8 + attribute 11 : font size + p1: 6...20 + attribute 12 : font width + p1: 0...4 + attribute 13 : font heigth + p1: 0...7 + attribute 14 : switch bold print on/off + p1: 0=off 1=on + attribute 15 : switch invers print on/off + p1: 0=off 1=on + attribute 16 : switch underlined print on/off + p1: 0=off 1=on + + group 52 : print graphics + attribute 10 : print barcode with dynamic data 6 and 7 + p1...p5 = kindOf, withText, offset, rotation, dataLeng, see description above + attribute 11 : print QRcode with preset data + + attribute 12 : print Logo + p1=nrOfLogo, p2=offset + + group 53 : print dynamics + attribute 10 : + p1: 1...8 = print dynData 0..7 at this place + + */ + + virtual char prn_clearDocument(uint8_t documentNumber) const =0; + // clear memory buffer for ONE document + // function takes a second! don't send right before "store doc" + + virtual bool prn_store_Document(uint8_t documentNumber ) const =0; + // send the predefined Layout (generated with above TD functions) to DeviceController to save + // documentNumber=0...15 + // maximal 1280 bytes each + // allowed: 0x20...0xFF, 0x0A, 0x0C, 0x1B (LF, CR, Esc) + // 0x1B=start of embedded command (next 7bytes = command) + + // with a print command a set of 8 dynamic strings can be sent + // the place in the ticket layout is predefined (already in DC memory) + // the dynamics are first calculated at printing time + + virtual bool prn_printDocument(uint8_t documentNumber, struct T_dynDat *dynTicketData) const =0; + + +// 36 + + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // Mifare Card Reader + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void mif_readerOn(bool on) const =0; + + virtual bool mif_cardIsAttached(void) const =0; + virtual bool mif_isMifarePowerOn(void) const =0; + + virtual void request_MifareReaderState() const =0; + virtual void request_MifareCardType() const =0; + virtual void request_MifareAtbType() const =0; + virtual void request_MifareID() const =0; + virtual void request_MifareData(uint8_t dataBlockNumber) const =0; + //virtual void request_MifareData() const =0; + + // dataBlockNumber must be 0....11, returns 64byte of data + + + virtual bool test_serialMux2isSetToMifare(void) const =0; + + virtual void mif_creatAtbCard(uint8_t cardType) const =0; + + /* data description: + byte 0: current read state: 0=power off 1=reader-fault 2=ready + 3=just reading 4=read complete + 5=read partial, removed too early + 6=state unknown + byte 1,2: read data length from card + 3: 1=reader is OK (reported serial nr is OK) 0=wrong or no reader + 4...15: reader version, expected "ATB25-1.8" + byte16: 1=card is present 0:not + 17: 0 + 18: card type reported from reader + 19: 1=allowed card type 0=not + 20: card size: 1 or 4 (dec) = card size + 21: LengthOfUID: 4 or 7 (dec) (byte) + 22: UID 8 byte in hex + byte 30: sector logged: 0 + byte 31: current sector: 0 + byte 32: result, always 0 + */ + virtual uint8_t mif_returnReaderStateAndCardType(uint8_t *buf, uint8_t maxBufferSize) const =0; + // retval 0=OK 1=error host buffer too small + + virtual bool mif_readerIsOK(void) const =0; + + virtual bool mif_cardAttached(void) const =0; + + virtual uint8_t mif_readResult(void) const =0; + // result: 0: unknown or still in progress + // 1: card read successful + // 2: reading error + + //virtual void mif_clearDataBuffer(void) const =0; + + virtual QString mif_cardUID(void) const =0; + // returns string with 8 byte + + //virtual bool mif_isBlockAvailable(uint8_t blkNr) const =0; + //blkNr=0...11 + + //virtual uint32_t mif_getAvailableDataBlocks(void) const =0; + // bit0=1 if block 0 = valid ...up to ... bit 11=1 if block 11=read + + virtual uint8_t mif_getCardDataDec(uint8_t blkNr, uint8_t *buf, uint8_t maxBufferSize) const =0; + + virtual QString mif_getCardDataStr(uint8_t blockNumber) const =0; + // with blockNumber=0...11 + + // read mifare data independant from blocks + //virtual uint16_t mif_getNrOfAvailableDataBytes(void) const =0; + + //virtual bool mif_getCardData768byteDec(uint8_t *buf, uint16_t bufferSize) const =0; + + //virtual bool mif_getCardDataDec(uint16_t fromAddr, uint16_t toAddr, uint8_t *buf, uint16_t bufferSize) const =0; + + //virtual QString mif_getCardDataStr(bool useHexFormat, char seperator) const =0; + +// 16 + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // Credit Card Terminal + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void credit_switchPower(bool on) const =0; + // the same as modem power + + virtual bool cred_isCreditPowerOn(void) const =0; + + virtual bool test_serialMux2isSetToCredit(void) const =0; + + virtual void credit_switchWake(bool WAKEACTIVE) const =0; + +// 4 + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // Modem + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void mod_switchPower(bool on) const=0; + + virtual bool mod_isGsmPowerOn(void) const =0; + + virtual bool test_serialMux1isSetToModem(void) const =0; + + virtual void mod_switchWake(bool WAKEACTIVE) const=0; + +// 2 + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // MDB Bus + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void mdb_switchPower(bool on) const =0; + virtual void mdb_switchWake(bool WAKEACTIVE) const =0; + + virtual bool mdb_WakeINisActive(void) const =0; + virtual bool mdb_testIsmdbTxDon(void) const =0; + virtual bool mdb_isMdbPowerOn(void) const =0; + + virtual void request_MDB_Status() const =0; + virtual void request_MDB_lastResponse() const =0; + + virtual bool test_getDO_mdbRXtst(void) const =0; + // readback digital outputs of connected devices + // these functions are not needed for normal operation + // but can be used to test and verify conditions + + virtual void mdb_sendBusReset(void) const =0; + + virtual void mdb_sendCommand(uint8_t toMdbDevice, uint8_t mdbCommand) const =0; + // send one bus command directly over mdb bus, refer to mdb manual for commands + // this command is not needed in normal operation, just for new or special things + + virtual void mdb_sendMessage(uint8_t toMdbDevice, uint8_t mdbCommand, uint8_t nrOfData, uint8_t *dataBuffer) const =0; + // nrOfData = sizeOf(dataBuffer) maximal 34 byte according mdb specs + // same as mdb_sendCommand, just with data + + virtual bool mdb_busIsReadyToWork() const =0; + + virtual bool mdb_deviceVoltageOK() const =0; + + virtual bool mdb_busVoltageOk() const =0; + + virtual uint8_t mdb_getLastDeviceResponse(uint8_t *fromDevice, uint8_t *lastRequest, + uint8_t *responseLength, uint8_t *responseBuffer) const =0; + // fromDevice: device nr from which data was requested 0,1,2,3 + // lastRequest: sent mdb command + // responseLength: nr of payload data (after mdb-ack) 0...34 + // responseBuffer holds payload data (answer from mdb device) + // return val: mdb result of this request: 1=got ACK 2=got 3xNAK 3=no or bad response 4:got Data (after ACK) + + +// 15 + + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // Coin Changer, Checker (EMP) + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void request_EMP_allParameters() const =0; + + virtual void request_EMP_lastCoin() const =0; + + virtual uint8_t emp_returnLastCoin(uint16_t *value, uint8_t *signal) const =0; + // use for changer + + + // ---------------------------------- Electronic Coin Validator EMP ----------------------------------------- + + virtual void emp_sendSettings(uint16_t coinAcceptance, uint8_t tokenChannel, uint16_t *coinDenomination ) const =0; + // coinAcceptance: bit0=coin1 (lowest donomination) bit15=coin16 bitH=accept bit L = deny coin (no validation) + // tokenChannel 0...31: if this signal comes from emp then a token was inserted + // coinDenomination = array of 16 coin values (e.g. 5, 10, 20...) + + virtual void emp_pollingOnOff(uint8_t on) const =0; + + virtual void emp_startCoinAcceptance(void) const =0; + + virtual void emp_stopCoinAcceptance(void) const =0; + + virtual void emp_getAllParameters(struct T_emp *emp) const =0; + // see struct in hwapi.h + // usage example: + // hwapi *HWaccess const =0; + // HWaccess = new hwapi() const =0; + // struct T_emp myEmp const =0; + // HWaccess->emp_getAllParameters(&myEmp) const =0; + // readval=myEmp.pollingRunning const =0; + + virtual uint8_t emp_chkIfCoinInserted(void) const =0; + // retval: 0...16 coins left in FIFO + + virtual void emp_getNewCoinRecord(uint8_t *valid, uint8_t *signal, uint8_t *error, uint16_t *value) const =0; + // with every call ONE coin is taken out of FIFO and pointer decremented + // valid: should be 1 + // signal: comes right from coin checker, 0...15 (0=first programmed coin type) 0xFF=no signal + // error: was reported from EMP as dynamic signal right after coin insertion (instead of + // coin signal), example: 3=unknown coin 4=coin is blocked by host. 0xFF=no error + // value: of the coin. Depends on parameter "coinDenomination" in function "emp_sendSettings" + // if coinDenomination[coin 0..15] = 0 then the value programmed in coin checker is taken + // if coinDenomination > 0 then this value is taken. + // Useful in case of two currencies (adapt to local currency) or for token. + + // function gives more details as "emp getLastCoin()" but "emp getLastCoin()" is easier to use + + // alternativ to emp_getNewCoinRecord( ): + virtual uint8_t emp_giveLastCoin(uint16_t *value, uint8_t *signal) const =0; + // retval: 0: NO coin stored 1: valid coin 2: got wrong coin or coin denied + // value: if retval1: value of the coin if reval=2: error number + // 0xFF means NO error or NO signal (as 0 is a valid error/signal) + // signal: channel nr reported from checker 0...15 + +// 11 + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // Coin blocker, Coin Escrow, Coin reject + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void shut_move(bool open) const =0; + virtual void esc_moveFlaps(uint8_t flap ) const =0; + // 0: close both 1: open take-flap 2: open return + + virtual void coin_switchRejectMotor(uint8_t dir) const =0; + virtual bool coid_isAttached(void) const =0; + virtual bool coin_escrowIsOpen(void) const =0; + virtual bool cash_getRejectMotorHomePos(void) const=0; + + + virtual bool coin_shutterIsOpen(void) const =0; + virtual bool coin_shutterTestOutput(void) const =0; + + virtual uint8_t coin_escrowFlapOpened(void) const =0; + // retval: 1:return flap is open 2:take flap is open 0:closed + + virtual void shut_openOnce(void) const =0; + // and close automatic after shutter time + + virtual void shut_openForCoin(bool start) const =0; + // open flap if coin is attached + // once process is started it runs until stop command + + virtual void shut_sendOpeningTime(uint16_t timeIn_ms ) const =0; + // after this time without retrigger the flap is closed + + virtual void esc_takeMoney(void) const =0; + // and close automatically after escrow time (1s) + + virtual void esc_returnMoney(void) const =0; + // and close automatically after escrow time (1s) + + virtual void coin_rejectCoins(void) const =0; + +// 15 + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // MDB Bill evaluator + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + + + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // doors, locks, cashboxes + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void lock_switchContactPower(bool on) const =0; + + virtual bool door_isContactPowerOn(void) const =0; + + virtual uint8_t door_getLocks(void) const =0; + // retval bit0: upper lever is up (=open) + // bit1: upper lever is down (=locked) + // bit2: lower lever is up + // bit3: lower lever is down (=locked) + + virtual bool door_upperDoorIsLocked(void) const =0; + + virtual bool door_upperDoorIsUnlocked(void) const =0; + + virtual uint8_t lock_switchUpperLock(uint8_t dir) const =0; + // dir 0=off 1=up 2=down + // move lock until stop cmd (0) + + virtual uint8_t lock_openUpperDoor(void) const =0; + // Locks stops automatically at end switch or by timeout + + virtual uint8_t lock_closeUpperDoor(void) const =0; + // Locks stops automatically at end switch or by timeout + + virtual uint8_t door_getSwitches(void) const =0; + // retval: bit0: upper door 1: low door 2:vault door + + virtual bool door_isUpperDoorOpen(void) const =0; + + + virtual bool door_lowerDoorIsLocked(void) const =0; + + virtual bool door_lowerDoorIsUnlocked(void) const =0; + + virtual uint8_t lock_switchLowerLock(uint8_t dir) const =0; + // dir 0=off 1=up 2=down + // move lock until stop cmd (0) + + virtual uint8_t lock_getDO_motors(void) const =0; + // bit0: upper lock forward bit 1 backward + // bit2: lower lock forward bit 3 backward + + virtual uint8_t lock_openLowerDoor(void) const =0; + // there's no closing function as Lock always makes one complete cycle and can be locked again immed. + + virtual uint8_t lock_closeLowerDoor(void) const =0; + + virtual bool door_isLowerDoorOpen(void) const =0; + + virtual uint8_t vault_getSwitches(void) const =0; + // retval bit0: cash box, bit 1: bill box + + virtual bool vault_isVaultDoorOpen(void) const =0; + + virtual void lock_switchVaultDoor(void) const =0; + + virtual bool vault_isCoinVaultIn(void) const =0; + + virtual bool vault_isBillVaultIn(void) const =0; + +// 21 + + + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + // LEDs, Barrier, Alarm, Relais, Aux + // $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ + + virtual void led_switchLedIllumination(uint8_t on) const = 0; + + virtual void led_switchLedCoinbassin(uint8_t on, uint8_t ton, uint8_t tof) const =0; + + virtual bool led_coinIsOn(void) const =0; + // read back digital output from DC-uC-Port + virtual bool led_frontIsOn(void) const =0; + + virtual void led_switchLedService(uint8_t on) const =0; + // on=1 off=0 + virtual bool led_insideIsOn(void) const =0; + + virtual void led_switchLedPaper(uint8_t on, uint8_t ton, uint8_t tof) const =0; + virtual bool led_ticketIsOn(void) const =0; + + virtual void led_switchLedStart(uint8_t on, uint8_t ton, uint8_t tof) const =0; + virtual bool led_StartIsOn(void) const =0; + + virtual void led_switchLedPinPad(uint8_t on, uint8_t ton, uint8_t tof) const =0; + virtual bool led_pinIsOn(void) const =0; + + + virtual void fan_switchFan(bool on) const =0; + virtual void alarm_switchSiren(bool on) const =0; + virtual bool fan_isOn(void) const =0; + + virtual bool siren_isOn(void) const =0; + + virtual void bar_OpenBarrier(bool open) const =0; + virtual bool bar_relayIsOn(void) const =0; + + virtual bool bar_optoIn1isOn(void) const =0; + + virtual bool bar_optoIn2isOn(void) const =0; + + virtual void aux_power(bool on) const =0; + virtual bool aux_powerIsOn(void) const =0; + + virtual void aux_setUsage(uint8_t PinDirection) const =0; + virtual void aux_setOutputs(uint8_t PinIsHigh) const =0; + + virtual bool aux_isAuxPowerOn(void) const =0; + + virtual uint8_t aux_getAuxInputs(void) const =0; + + + +// ------------------------------------------------------------------------------------ +// 27.3.2023: Use Device-Controller's Bootloader to send hex-file +// ------------------------------------------------------------------------------------ + + virtual void bl_rebootDC(void) const =0; + + virtual void bl_startBL(void) const = 0; + // send command within 4s after DC power-on, otherwise bl is left + + virtual bool bl_checkBL(void) const = 0; + // send command to verify if bl is up + + virtual bool bl_isUp(void) const =0; + // return true is bl is up and running + // also initializes "sendFile" + + virtual void bl_sendAddress(uint16_t blockNumber) const=0; + // send start address, nr of 64byte-block, start with 0 + // will be sent only for following block-numbers: + // 0, 1024, 2048, 3072 and 4096, so basically every 64kByte + // for other addresses nothing happens + + virtual uint8_t bl_wasSendingAddOK(void) const=0; + // return val: 0: no response by now 1:error 10: OK + + virtual void bl_openBinary(void) const=0; + // to be used within CashAgent, momentary not processed + + virtual void bl_sendDataBlock(uint8_t length, uint8_t *buffer) const=0; + // send 64 byte from bin file + + virtual void bl_sendLastBlock(void) const=0; + // send this command after all data are transfered + + virtual uint8_t bl_wasSendingDataOK(void) const=0; + // return val: 0: no response by now 1:error 10: OK + + virtual void bl_stopBL(void) const=0; + // leave BL and start (the new) application + + //virtual bool bl_isDiagAvailable(void) const=0; + + //virtual QString dc_getDiagText(void) const=0; + + + // Komplett-schreib Funktion, noch nicht getestet + // Nachteil: keine Rückmeldung wie lang's noch dauert + //virtual void bl_startSending(void) const=0; + // call once after BL is working and file is loaded + //virtual void bl_sendFile(void) const=0; + // call cyclic while loading bin-file to bootloader + + + + +// ------------------------------------------------------------------------------------ +// 6.4.2023: new functions for coin collection and printing +// some new system functions +// ------------------------------------------------------------------------------------ + + virtual bool rtc_setTimeDateDirect(struct Trtc_DateTime *DateTime) const=0; + // return true if sending, false if cmd-stack is full + + virtual bool rtc_getExtendedTime(uint8_t *leng, uint8_t *data) const=0; +/* + buf[0]=GlobTime.Hours; + buf[1]=GlobTime.Min; + buf[2]=GlobTime.Sec; + buf[3]=GlobTime.Year; + buf[4]=GlobTime.Month; + buf[5]=GlobTime.Day; + buf[6]=GlobTime.DOW; + buf[7]=' '; // immer auf 32bit auffüllen sonst Speicherproblem beim Master! + uitmp=GlobTime.MinOfDay; + buf[8]=swl_getOneByteFromUint(uitmp, 0); + buf[9]=swl_getOneByteFromUint(uitmp, 1); + buf[10]=' '; + buf[11]=' '; + ultmp=GlobTime.SecOfDay; + buf[12]=swl_getOneByteFromUlong(ultmp, 0); + buf[13]=swl_getOneByteFromUlong(ultmp, 1); + buf[14]=swl_getOneByteFromUlong(ultmp, 2); + buf[15]=swl_getOneByteFromUlong(ultmp, 3); + + buf[16]=swl_isLeap(GlobTime.Year); + buf[17]=swl_getNextLeapYear(GlobTime.Year); + buf[18]=swl_getLastLeapYear(GlobTime.Year); + buf[19]=swl_hoursOfThisWeek(GlobTime.DOW, GlobTime.Hours); + + uitmp=swl_minutesOfThisWeek(GlobTime.DOW, GlobTime.Hours, GlobTime.Min); + buf[20]=swl_getOneByteFromUint(uitmp, 0); // 0=low byte 1=high byte + buf[21]=swl_getOneByteFromUint(uitmp, 1); + + uitmp=swl_hoursOfThisMonth(GlobTime.Day, GlobTime.Hours); + buf[22]=swl_getOneByteFromUint(uitmp, 0); + buf[23]=swl_getOneByteFromUint(uitmp, 1); + + uitmp=swl_minutesOfThisMonth(GlobTime.Day, GlobTime.Hours, GlobTime.Min); + buf[24]=swl_getOneByteFromUint(uitmp, 0); + buf[25]=swl_getOneByteFromUint(uitmp, 1); + + uitmp=swl_GetDaysOfYear(GlobTime.Year, GlobTime.Month, GlobTime.Day); + buf[26]=swl_getOneByteFromUint(uitmp, 0); + buf[27]=swl_getOneByteFromUint(uitmp, 1); + + uitmp=swl_GetHoursOfYear(GlobTime.Year, GlobTime.Month, GlobTime.Day, GlobTime.Hours); + buf[28]=swl_getOneByteFromUint(uitmp, 0); + buf[29]=swl_getOneByteFromUint(uitmp, 1); + buf[30]=0; + buf[31]=0; + ultmp= swl_GetMinutesOfYear(GlobTime.Year, GlobTime.Month, GlobTime.Day, + GlobTime.Hours, GlobTime.Min); + buf[32]=swl_getOneByteFromUlong(ultmp, 0); + buf[33]=swl_getOneByteFromUlong(ultmp, 1); + buf[34]=swl_getOneByteFromUlong(ultmp, 2); + buf[35]=swl_getOneByteFromUlong(ultmp, 3); + + buf[36]=rtc_getSqwaveSettings(); + buf[37]=0; + buf[38]=0; + buf[39]=0; + + ultmp= 0; // Minutes of the Millenium + buf[40]=swl_getOneByteFromUlong(ultmp, 0); + buf[41]=swl_getOneByteFromUlong(ultmp, 1); + buf[42]=swl_getOneByteFromUlong(ultmp, 2); + buf[43]=swl_getOneByteFromUlong(ultmp, 3); + + dc2prot_setReadData(44, buf); + + */ + + virtual bool sys_runCompleteTest(void) const=0; + // warning: lasts 20s in one pace + // return true if sending, false if cmd-stack is full + + virtual bool sys_ready4sending(void) const=0; + // return true if a Json-file can be sent + + virtual bool sys_sendJsonFileToDc(uint8_t kindOfFile, uint8_t nrOfTemplate, uint8_t *content ) const=0; + // kindOfFile: 1=config, 2=device, 3=cash, 4=serial, 5=time, 6=printer + // nrOfTemplate=1...32 if kindOfFile==6 + // content = content of the Json file, max 800byte ascii signs + // file is 0-terminated + // return true if sending, false if cmd-stack is full + + virtual bool prn_sendDynamicPrnValues(uint8_t *dynPrnVal ) const=0; + // dynPrnVal = array of 8 Variables with 8 byte each, come as ascii string + // like: char prn_dynPrnVal[8][8]; + // return true if sending, false if cmd-stack is full + + virtual bool prn_printTemplate(uint8_t nrOftemplate) const=0; + // print one of the templates loaded by Json prior + // nr = 1..32 + // return true if sending, false if cmd-stack is full + + virtual void log_getHoldAccountNumbers(uint32_t *accNr ) const=0; + // returns all acc nrs of the backuped vault records + // use: uint32_t backupedAccNumbers[8] + + virtual bool log_selectVaultRecord(uint16_t accountNr ) const=0; + // return true if sending, false if cmd-stack is full + +//request, isAvailable +virtual void log_getVaultRecord(struct T_vaultRecord *retVR) const=0; + // which was selected by: log_selectVaultRecord() + // to be forwarded to Ismas + + virtual bool prn_printAccountReceipt(void) const=0; + // return true if sending to DC OK, false if cmd-stack is full + + virtual bool prn_printTestTicket(void) const=0; + // return true if sending to DC OK, false if cmd-stack is full + + virtual bool cash_startPayment(uint16_t amount) const=0; + + virtual uint32_t getInsertedAmount(void) const=0; + + virtual uint16_t getLastInsertedCoin(void) const=0; + + virtual bool getAllInsertedCoins(uint16_t *types, uint16_t *values) const=0; + // all inserted coins (max 64) since "cash_startPayment" + + virtual bool cash_cancelPayment(void) const=0; + // and return coins + + virtual bool cash_stopPayment(void) const=0; + // and keep coins in escrow + + // after ticket/goods issue: + virtual bool vend_success(void) const=0; + // conclude payment process, encash all inserted coins to vault. Printing was successful + // if possible return change + + virtual bool vend_failed(void) const=0; + // conclude payment process and return all inserted coins + + + + + + + virtual uint8_t mif_getCardType(QString cardholder) const=0; + // return 1,2,3,4 = upper, lower access card, printer test, coin test + // cardholder: 7byte Name-String + + virtual uint64_t sys_getWakeSource(void) const =0; + // retval: 6 bytes, bit coded, 1=event keeps DC awake + + //virtual void sys_getDeviceConditions(struct T_moduleCondition *devCond) const=0; + virtual void sys_getDeviceConditions(uint8_t *leng, uint8_t *data) const=0; + /* + + outBuf[0]=modCond.ram; + outBuf[1]=modCond.intEe; + outBuf[2]=modCond.extEe; + outBuf[3]=modCond.rtc; + outBuf[4]=modCond.boardHw; + outBuf[5]=modCond.printer; + outBuf[6]=modCond.modem; + outBuf[7]=modCond.signal; + outBuf[8]=modCond.regist; + outBuf[9]=modCond.mdbBus; + outBuf[10]=modCond.coinChecker; + outBuf[11]=modCond.coinEscrow; + outBuf[12]=modCond.mifareReader; + outBuf[13]=modCond.creditTerm; + outBuf[14]=modCond.coinReject; + outBuf[15]=modCond.coinSafe; + outBuf[16]=modCond.billSafe; + outBuf[17]=modCond.voltage; + outBuf[18]=modCond.temper; + outBuf[19]=modCond.poweronTest; + outBuf[20]=modCond.doorState; + outBuf[21]=modCond.doorWasOpened; + outBuf[22]=modCond.changer; + outBuf[23]=modCond.coinBlocker; + outBuf[24]=modCond.billReader; + outBuf[25]=modCond.ResetReason; + outBuf[26]=modCond.allModulesChecked; + outBuf[27]=modCond.alarmState; + outBuf[28]=0; + outBuf[29]=0; + + */ + + + //virtual void sys_getDynMachineConditions(struct T_dynamicCondition *dynMachCond) const=0; + virtual void sys_getDynMachineConditions(uint8_t *leng, uint8_t *data) const=0; +/* + + outBuf[pBuf++]=dynCond.allDoorsDebounced; + outBuf[pBuf++]=dynCond.openedAuthorized; + outBuf[pBuf++]=dynCond.CBinDebounced; + outBuf[pBuf++]=dynCond.upperDoor; + + outBuf[pBuf++]=dynCond.middleDoor; + outBuf[pBuf++]=dynCond.lowerDoor; + outBuf[pBuf++]=dynCond.coinBox; + outBuf[pBuf++]=dynCond.billBox; + + outBuf[pBuf++]=dynCond.modeAbrech; + outBuf[pBuf++]=dynCond.onAlarm; + outBuf[pBuf++]=dynCond.nowCardTest; + outBuf[pBuf++]=dynCond.nowPayment; + + outBuf[pBuf++]=dynCond.lastMifCardType; + outBuf[pBuf++]=dynCond.lastSDoorState; + outBuf[pBuf++]=dynCond.lastVDoorState; + outBuf[pBuf++]=dynCond.lastCBstate; + + outBuf[pBuf++]=dynCond.paymentInProgress; + outBuf[pBuf++]=0; + uitmp=dynCond.U_Batt; + outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETLOWBYT); + outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); + uitmp=dynCond.Temperatur; + outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETLOWBYT); + outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); + + uitmp=dynCond.nrCoinsInBox; // send seperate also + outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETLOWBYT); + outBuf[pBuf++]=swl_getOneByteFromUint(uitmp, GETHIGHBYT); + + ultmp=dynCond.amountInBox; // send seperate also + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWESTBYT); + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWMID); + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHMID); + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHESTBYT); + + ultmp=dynCond.totalTransVolume; + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWESTBYT); + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWMID); + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHMID); + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHESTBYT); + + ultmp=dynCond.totalNrOfVends; + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWESTBYT); + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETLOWMID); + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHMID); + outBuf[pBuf++]=swl_getOneByteFromUlong(ultmp, GETHIGHESTBYT); +// 36 + outBuf[pBuf++]=dynCond.jsonValid_config; + outBuf[pBuf++]=dynCond.jsonValid_device; + outBuf[pBuf++]=dynCond.jsonValid_cash; + outBuf[pBuf++]=dynCond.jsonValid_print; + outBuf[pBuf++]=dynCond.jsonValid_serial; + outBuf[pBuf++]=dynCond.jsonValid_time; + outBuf[pBuf++]=dynCond.lastFileType; + outBuf[pBuf++]=0; + +*/ + + +}; + + +// History +// 11.10.2021: V1.0 222 functions +// 23.12.2021: V1.1 added block-parameter to function "read mifare data" +// 30.12.2021: V1.2 added function: mif_clearDataBuffer(), mif_isBlockAvailable(uint8_t blkNr) and mif_getAvailableDataBlocks() +// 1.1.2022: V1.3 Mifare extended. ( background: read 16 x 48byte from card to DC, read 12 x 64byte from DC to CA) +// new: read full card with 768bytes from HWapi without block borders +// added: mif_getNrOfAvailableDataBytes mif_getCardData768byteDec(uint8_t *buf, uint16_t bufferSize) +// mif_getCardDataDec(uint16_t fromAddr, uint16_t toAddr, uint8_t *buf, uint16_t bufferSize) +// mif_getCardDataStr(bool useHexFormat, char seperator) + +// 29.03.2023: V3.1 some extensions for PSA1256_ptu5, +// V3.2 Bootloader improvement +// 12.04.2023: V3.3 new features extended: loading and using Json-files, cash-collection, cash-data-logging + +//#define HWINF_iid "Atb.Psa2020.software.HWapi/3.1" +//#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.1" +#define HWINF_iid "Atb.Psa1256ptu5.software.HWapi/3.3" + + + +Q_DECLARE_INTERFACE(hwinf, HWINF_iid) + + +#endif + + +